Board index For Sale Vendors Pit Slave's Products

Winch Straps

Moderator: Pit Slave

Newer development...

Postby Pit Slave » Tue Nov 15, 2016 10:11 pm

Hey guys, a few of you(and I do mean few, possible only one or two) may know what my very current status is with what's been going on. I hate to say "coming soon!" because that's not my style. However, I feel I should do a short update about one of the particular products that I am working on. I will call the smartbar bypass. This will most likely come in a few styles being mainly; 1, a locker bypass in plug-n-play configuration; 2, a replacement board for your smartbar that will require removal of the plug from the circuit board(advanced skills recommend for the removal and soldering/reflow of circuit board); 3, custom control box to activate a solenoid valve to actuate an air locker(this can be any or all combinations of air and/or electric locker)

This will be built using maintenance free components to help guarantee better, reliable operation ie. no relays or moving parts. Granted relays are still reliable however, they too will burn out after some time and sooner than later for the ones with defects or cheaply made units. For the custom style, it will allow expandable options for future changes and modifications. Think of it as a "grows up with your build" option. An example is you are planning to go air but currently have electric. It will work with your indicator lights to actually tell you when you engage, but, won't stop the rest of the system due to drive line delay( who cares if your front locks before the rear does, aka no waiting in line).

More details of the entire system and it's operation to come later. Stay tuned, and post your thoughts and questions and I'll try to answer as soon as I can.

--Chris

Sent from my XT1254 using Tapatalk
Nothing's more dead than a horse in a glue bottle.Image

There are two ways to conquer and enslave a nation.
One is by the sword. The other is by debt.
John Adams - 1826


I guess you could say I'm a bit off center.....:D
User avatar
Pit Slave
Vendor
 
Posts: 1367
Joined: Thu May 17, 2012 9:12 am
Location: Sandy, Utah.. Moab, Jersey, Space Station, Baja.....

Re: Newer development...

Postby w2dodge » Wed Nov 16, 2016 4:57 am

sounds awesome chris.......locker by pass,using factory controls..?..any switches and such..?..im in .. :rockon: :popcorn:
User avatar
w2dodge
500_Posts
 
Posts: 842
Joined: Mon May 21, 2012 2:57 pm
Location: nj..ny

Re: Newer development...

Postby Pit Slave » Wed Nov 16, 2016 2:22 pm

No additional switches required, however, one version of the controller box can be used in non - Power Wagon vehicle such as a standard 2500.

Sent from my XT1254 using Tapatalk
Nothing's more dead than a horse in a glue bottle.Image

There are two ways to conquer and enslave a nation.
One is by the sword. The other is by debt.
John Adams - 1826


I guess you could say I'm a bit off center.....:D
User avatar
Pit Slave
Vendor
 
Posts: 1367
Joined: Thu May 17, 2012 9:12 am
Location: Sandy, Utah.. Moab, Jersey, Space Station, Baja.....

Re: Newer development...

Postby akmopowr » Wed Nov 16, 2016 7:00 pm

"1, a locker bypass in plug-n-play configuration" - I know its my first post but count me in for this!
akmopowr
 
Posts: 1
Joined: Sat Jun 25, 2016 11:27 am
Location: Houston, TX

Re: Newer development...

Postby TwinStick » Tue Nov 22, 2016 8:31 am

What Generations will it work with ? I ask because I have an "old" 3rd Gen PW-2008.

And, if the new ZR2 does not make it to market or cost $50k, then I might as well get another Power Wagon. I Don't even know what Gen they are on now. I havn't been keeping up too well. :lol:
2008 Red QC PW G56. No lift yet, stock size tires. It pulls a 2016 Starcraft AR One Extreme, 3500 lbs.
Load Pro 35 helper springs. 2015 A.R.E. MX Series custom cap. PCP front diff cover protector. Mag-Hytec 6 qt rear diff cover. K&N replacement air filter only. Dual grounded throttle body. Winch TPC bypass. Fab Four rear bumper. DURA BAK lined rocker protection. And a bunch of new front end stuff.

G-56 Gear ratios: 1st) 6.29:1 2nd) 3.48:1 3rd) 2.10:1 4th) 1.38:1 5th) 1.0:1 6th) 0.79:1 Rev 6.29:1 --- = 78.01613:1 Crawl Ratio
-------------------------5.94:1--------3.28:1-------1.98:1-------1.31:1-------1.0:1-------0.74:1-----5.42:1 ---- = 73.675:1
545RFE----------------3.0:1---------1.67:1--------1.0:1--------0.75:1-------0.67:1------------------3.0:1 -------=37.21:1

2013+ 32.47 crawl ratio...............Can you see the trend ??????????????
TwinStick
2000_Posts
 
Posts: 3603
Joined: Mon May 28, 2012 5:58 pm

Re: Newer development...

Postby Pit Slave » Tue Nov 22, 2016 1:44 pm

It should work fine with anything.

Sent from my XT1254 using Tapatalk
Nothing's more dead than a horse in a glue bottle.Image

There are two ways to conquer and enslave a nation.
One is by the sword. The other is by debt.
John Adams - 1826


I guess you could say I'm a bit off center.....:D
User avatar
Pit Slave
Vendor
 
Posts: 1367
Joined: Thu May 17, 2012 9:12 am
Location: Sandy, Utah.. Moab, Jersey, Space Station, Baja.....

Re: Newer development...

Postby Low_Sky » Tue Nov 22, 2016 5:33 pm

Godspeed, Pit Slave! I know that a few have undertaken endeavors like this one, and have been crushed under the weight of having a real life and a never-ending list of forum newbies shouting "I want one!" I believe if anybody can do it, you can. Good luck!
John

Alaska
2015 PW Laramie w/RamBox
Custom rock sliders
User avatar
Low_Sky
250_Posts
 
Posts: 440
Joined: Fri May 01, 2015 5:12 pm
Location: Los Anchorage, Alaska

Re: Newer development...

Postby oletrucker » Thu Nov 24, 2016 12:05 am

Haven't been following the forum very often lately, sometimes life just gets in the way. Have been following 3rd gen locker-by-pass projects for a few years now. I think if anybody can do this it is going to be you. Would like to purchase a unit when they are ready and thanks for keeping us updated. Waiting for more good news on this project.
"All too often, people born into a state free of tyranny, never fully realize the price paid in achieving this most rare and precious of gifts. And, thinking that freedom was a normal environment of the People, never understood its fragility or true value until after it was lost."
J.C. Harrison
oletrucker
 
Posts: 14
Joined: Mon Jun 04, 2012 10:49 pm

Re: Newer development...

Postby Buzzman » Mon May 01, 2017 2:14 pm

Any news on by-pass?
Buzzman
 
Posts: 8
Joined: Sat May 14, 2016 12:02 pm
Location: Manchester, Connecticut

Re: Newer development...

Postby Pit Slave » Mon May 01, 2017 3:27 pm

I need to get back to SLC and continue where I left off. No real news yet, been busy with a startup company. I haven't forgotten about it, I want one for my truck as well.

Sent from my XT1254 using Tapatalk
Nothing's more dead than a horse in a glue bottle.Image

There are two ways to conquer and enslave a nation.
One is by the sword. The other is by debt.
John Adams - 1826


I guess you could say I'm a bit off center.....:D
User avatar
Pit Slave
Vendor
 
Posts: 1367
Joined: Thu May 17, 2012 9:12 am
Location: Sandy, Utah.. Moab, Jersey, Space Station, Baja.....

Re: Newer development...

Postby apalma302 » Wed May 31, 2017 12:06 pm

Hello I would like the locker bypass for my 2017 PW. Please count me in for one when ready. Thanks
apalma302
 
Posts: 1
Joined: Wed May 31, 2017 12:03 pm

Re: Newer development...

Postby Pit Slave » Fri Jul 07, 2017 6:06 pm

Ok, I have made some more progress. I will need to do some load testing to be certain that the design can handle the electrical current. Oh and one more thing, this is a maintenance-free design. It's without mechanical relays and all solid state.

Yeah, I smoked 'em, sometimes you just gotta #sendit
Nothing's more dead than a horse in a glue bottle.Image

There are two ways to conquer and enslave a nation.
One is by the sword. The other is by debt.
John Adams - 1826


I guess you could say I'm a bit off center.....:D
User avatar
Pit Slave
Vendor
 
Posts: 1367
Joined: Thu May 17, 2012 9:12 am
Location: Sandy, Utah.. Moab, Jersey, Space Station, Baja.....

Re: Newer development...

Postby 2005PW » Fri Jul 07, 2017 6:17 pm

Great work Pit Slave, as I have recently traded my '05 PW for a '17, I fnd myself need a new by-pass! Count me in.

Sent from my XT1585 using Tapatalk
2005PW
 
Posts: 8
Joined: Thu Apr 16, 2015 8:19 am

Re: Newer development...

Postby oletrucker » Sun Jul 09, 2017 10:50 pm

Surprised that you are still working on this project, but it is refreshing to here from you. What is the expected wait time until you have a unit completed and just what Gen's of the PW will it work on? How soon before you have enough units to sell? Inquiring minds would like to know!
"All too often, people born into a state free of tyranny, never fully realize the price paid in achieving this most rare and precious of gifts. And, thinking that freedom was a normal environment of the People, never understood its fragility or true value until after it was lost."
J.C. Harrison
oletrucker
 
Posts: 14
Joined: Mon Jun 04, 2012 10:49 pm

Re: Newer development...

Postby Pit Slave » Thu Jul 13, 2017 11:54 am

In all honesty, the main unit should work with anything. The only issue is I haven't worked on the newer trucks with the CAD system on the front axle.

Once everything is worked out on the design and finalized, it should be about a 2~3 week turn around or sooner. I am doing my best to stick with a more readily available parts source instead of slow vendors. The wiring is from a US manufacturer, the same one that supplies to the "big3" so it's specific for automotive use. I can at the user's request upgrade that to mil spec Teflon at cost of the wire. Not cheap.

But like I said, I need to do some abusive testing on the circuit/electronics to be able to give it a go.

Yeah, I smoked 'em, sometimes you just gotta #sendit
Nothing's more dead than a horse in a glue bottle.Image

There are two ways to conquer and enslave a nation.
One is by the sword. The other is by debt.
John Adams - 1826


I guess you could say I'm a bit off center.....:D
User avatar
Pit Slave
Vendor
 
Posts: 1367
Joined: Thu May 17, 2012 9:12 am
Location: Sandy, Utah.. Moab, Jersey, Space Station, Baja.....

Re: Newer development...

Postby Colibri » Thu Jul 20, 2017 1:41 pm

For those of us with air lockers would you be able to make something to fool the computer into thinking the oem lockers are still plugged in? I get tired of the flashing " your locker no worky" lights.
Colibri
1000_Posts
 
Posts: 1138
Joined: Mon Jun 08, 2015 3:44 pm

Re: Newer development...

Postby Pit Slave » Thu Jul 20, 2017 6:17 pm

I don't see why not.

Yeah, I smoked 'em, sometimes you just gotta #sendit
Nothing's more dead than a horse in a glue bottle.Image

There are two ways to conquer and enslave a nation.
One is by the sword. The other is by debt.
John Adams - 1826


I guess you could say I'm a bit off center.....:D
User avatar
Pit Slave
Vendor
 
Posts: 1367
Joined: Thu May 17, 2012 9:12 am
Location: Sandy, Utah.. Moab, Jersey, Space Station, Baja.....


Return to Pit Slave's Products

Who is online

Users browsing this forum: No registered users and 1 guest