PW 3G Steering Brace & OEM Front Axle U-Joints

Buy / Sell / Trade - Got something to get rid of, or are looking for something specific?
Post Reply
User avatar
AceMan
Site Admin
Site Admin
Posts: 1545
Joined: Tue May 22, 2012 11:27 am
Model Year: 2006
Location: Delaware County, PA
Contact:
Contact AceMan

PW 3G Steering Brace & OEM Front Axle U-Joints

Post by AceMan » Mon May 28, 2012 2:26 pm

Ok, my very first post, which happens to be a for sale post! I have not posted it at that "other place," figuring first shot goes to the old heads, err, the regulars! LOL! :rockon:

Since I got the new 4G style steering box, I can no longer use the steering brace Rusty modded for me, so it's up for sale. The bearings are still good, but you'll have to get four mounting bolts. Figure that $75.00 plus shipping is fair.

I also have a set of brand new OEM front axle U-joints for sale. I bought a set of Spicers and had my tech put them on instead of the OEM. Figure $75.00 + shipping is fair.

I'll post pics of them later today.

And looking forward to Rausch this weekend!

Late edit: The 1/4" steel 2" x 3" clearance spacers are included, too.
Did you ever notice that after Monday and Tuesday the calendar says "WTF"?
KB1ACE - Kilo-Bravo-One-Alpha-Charlie-Echo
Power Wagon Owner's Club #110
Black '06 PW QC
Auto, REC Nav/Sat UConnect, Reverse cam, MyGig v2 Lockpick, adj pedals, Tow mirrors, aftermarket heated seats.
Mods: Mopar Rock Rails, Carr steps (what's left of them), Toyo MT 35x12.5x17, Mopar 8.5 "T"-Linkage, Carli Trackbar (frameside 16mm bolt), King 2.5 Reservoir shocks, Carli Progressive coils, Carli Front Diff Protector, Rockcrusher rear diff, Carli Low Mount Damper, KC 55 watt rear floods w/Defiant bracket, RetroSolutions 12W LED rev & brake lights, EBC Slotted/Dimpled Rotors & Yellow Stuff Pads, 4th Gen Steering Box, Spicer axle U-joints, 4G DTProfab Steering brace ground 3/8" offset to fit my 3G 2006 with a 4G box.
Sitting in Garage: Ram SRT10 A-Pillar.
Image Image Image
Top
User avatar
VA_Wagon Man
500_Posts
500_Posts
Posts: 737
Joined: Mon May 21, 2012 10:54 am
Location: Virginia

Re: PW 3G Steering Brace & OEM Front Axle U-Joints

Post by VA_Wagon Man » Mon May 28, 2012 3:46 pm

Bring it to Rausch if it's not too much trouble, someone there may take it off your hands. It all depends on how much money I blow this week getting everything ready............just gotta make sure I have enough to get there..... :jawdrop:

:lol:
Long Gone:
'05 Silver Power Wagon: # 869: Custom Rear Hitch & Bed Clearance Mod, Custom Front and Rear Tubular Bumpers, Airflow 3rd Gen Snorkel, Diablo Sport Predator, 35x12.50 Nitto Mud Grappler Extreme Terrain, Flow Master 40, Mopar Rock Rails, Warn 15,000lb Winch,with Thermal Bypass, 4.56 Locking front and rear Diffs, Sway-bar disconnect, Uprgraded " T " steering linkage, Fully Skid plated with fore and aft bars, Carli Front Diff Protector, RockCrusher Rear Diff Pro, Bilstein 5100's with rear Custom Valving, Pit Slave Winch Strap, CajunPW PNP Locker By-Pass,

Follow Me, I'll Pull You Out...AFTER you pull me out......
Rausch Creek 2010 Fall Run
Rausch Creek 2011 Spring Run
Rausch Creek 2011 Fall Run
Rausch Creek 2012 Spring Run
Future Rausch Creek 2013 Spring Run June 22nd!

"There is no hunting, like the hunting of man, and those who have hunted armed men long enough, and liked it, never cared for anything else thereafter." --Earnest Hemmingway--
Top
User avatar
AceMan
Site Admin
Site Admin
Posts: 1545
Joined: Tue May 22, 2012 11:27 am
Model Year: 2006
Location: Delaware County, PA
Contact:
Contact AceMan

Re: PW 3G Steering Brace & OEM Front Axle U-Joints

Post by AceMan » Mon May 28, 2012 11:10 pm

I'll definitlely bring both with me.
Did you ever notice that after Monday and Tuesday the calendar says "WTF"?
KB1ACE - Kilo-Bravo-One-Alpha-Charlie-Echo
Power Wagon Owner's Club #110
Black '06 PW QC
Auto, REC Nav/Sat UConnect, Reverse cam, MyGig v2 Lockpick, adj pedals, Tow mirrors, aftermarket heated seats.
Mods: Mopar Rock Rails, Carr steps (what's left of them), Toyo MT 35x12.5x17, Mopar 8.5 "T"-Linkage, Carli Trackbar (frameside 16mm bolt), King 2.5 Reservoir shocks, Carli Progressive coils, Carli Front Diff Protector, Rockcrusher rear diff, Carli Low Mount Damper, KC 55 watt rear floods w/Defiant bracket, RetroSolutions 12W LED rev & brake lights, EBC Slotted/Dimpled Rotors & Yellow Stuff Pads, 4th Gen Steering Box, Spicer axle U-joints, 4G DTProfab Steering brace ground 3/8" offset to fit my 3G 2006 with a 4G box.
Sitting in Garage: Ram SRT10 A-Pillar.
Image Image Image
Top
User avatar
AceMan
Site Admin
Site Admin
Posts: 1545
Joined: Tue May 22, 2012 11:27 am
Model Year: 2006
Location: Delaware County, PA
Contact:
Contact AceMan

Re: PW 3G Steering Brace & OEM Front Axle U-Joints

Post by AceMan » Tue May 29, 2012 2:42 am

I should have added, I still have my front bumper sitting on my rear patio. Anyone interested?

My front bumper and VA's rear bumper will make a good match :D
Did you ever notice that after Monday and Tuesday the calendar says "WTF"?
KB1ACE - Kilo-Bravo-One-Alpha-Charlie-Echo
Power Wagon Owner's Club #110
Black '06 PW QC
Auto, REC Nav/Sat UConnect, Reverse cam, MyGig v2 Lockpick, adj pedals, Tow mirrors, aftermarket heated seats.
Mods: Mopar Rock Rails, Carr steps (what's left of them), Toyo MT 35x12.5x17, Mopar 8.5 "T"-Linkage, Carli Trackbar (frameside 16mm bolt), King 2.5 Reservoir shocks, Carli Progressive coils, Carli Front Diff Protector, Rockcrusher rear diff, Carli Low Mount Damper, KC 55 watt rear floods w/Defiant bracket, RetroSolutions 12W LED rev & brake lights, EBC Slotted/Dimpled Rotors & Yellow Stuff Pads, 4th Gen Steering Box, Spicer axle U-joints, 4G DTProfab Steering brace ground 3/8" offset to fit my 3G 2006 with a 4G box.
Sitting in Garage: Ram SRT10 A-Pillar.
Image Image Image
Top
User avatar
AceMan
Site Admin
Site Admin
Posts: 1545
Joined: Tue May 22, 2012 11:27 am
Model Year: 2006
Location: Delaware County, PA
Contact:
Contact AceMan

Re: PW 3G Steering Brace & OEM Front Axle U-Joints

Post by AceMan » Wed Jul 04, 2012 2:15 pm

The brace was bought by John K, at Rausch.

I still have the OEM axle U-joints for sale. Anyone?

Posted by Nexus via Tapatalk. Please excuse any misspelling.
Top
User avatar
AceMan
Site Admin
Site Admin
Posts: 1545
Joined: Tue May 22, 2012 11:27 am
Model Year: 2006
Location: Delaware County, PA
Contact:
Contact AceMan

Re: PW 3G Steering Brace & OEM Front Axle U-Joints

Post by AceMan » Thu Sep 20, 2012 11:28 am

Bump!

I still have the OEM axle U-joints, if anyone's interested.
Top
Post Reply

Return to “Classifieds & Want Ads”