White knuckle replica sliders for 2014 PW

Jnallison · Post by **Jnallison** » Mon Oct 17, 2016 11:13 pm

These are custom sliders that was made for my PW. The truck is gone so I am selling them. Give me a call, we can discuss the price, asking $800. Made of .120" wall tubing, 2x2 square and 1/8", linex covered professionally and have the diamond plate step. Additionally they have a expanded metal strip for grip and boot cleaning. Inspiration came from whit knuckle but these were built before they offered them, and honestly they mount better than what white knuckle came up with. They are very stout and have one small scratch on the bottom from use about 6" long. Jason 505-860-1003. Located in Farmington NM but I frequently go to Albuquerque, Denver soon and Grand Junction area. Call me and we can discuss details. Thx. I'll try to get the pics to load but it keeps saying they are to large. PM and I'll send pics or you can find my thread on them.

Low_Sky · Post by **Low_Sky** » Fri Oct 21, 2016 1:22 pm

Just a bump for a good guy trying to sell a great pair of sliders. I got serial #2 of these custom sliders after seeing Jason's on this forum, and they are hell for stout. The welder that made them did a really great job!

Post by **DamageWagon** » Fri Oct 21, 2016 3:11 pm

Would this fit a 2011? Are the mounts near any suspension areas that might create clearance issues?

Sent from my iPhone using Tapatalk

Low_Sky · Post by **Low_Sky** » Fri Oct 21, 2016 9:20 pm

2014.5+ trucks only, sorry DamageWagon.

Post by **DamageWagon** » Fri Oct 21, 2016 10:30 pm

Best of luck to you then! Could you throw up a picture of the mounting system you were referring to? I will likely be making my own in a few weeks here.

Sent from my iPhone using Tapatalk

Jnallison · Post by **Jnallison** » Sun Oct 23, 2016 3:16 pm

I don't have any pics on my phone of the mounting. If you look up my thread on them you can browse it and it shows the mounting somewhere through there. Hey thanks for the compliments. JB does do some great work, Arcnit is his companies name. There is no interference with suspension whatsoever on the '14 with the articulink. The '11 has different arms up front so you may need to modify the very front mount. I am not sure if they have the same hole in the frame it goes through. These mount without any drilling and are a better mount than what white knuckle offers now. When they were built white knuckle didn't have anything out.

Jnallison · Post by **Jnallison** » Sun Oct 23, 2016 3:24 pm

And believe it or not, those are actually serial #1. JB was running out of time to get yours done, so we robbed mine and sold them to you so he could get you in and out.

It cost him some beer. The ones for sale are actually #2. He has done a few more since then for Jeeps. They have some aluminum finish work with dimple holes and stuff. Wish I had pics because they turned out absolutely awesome looking, very custom and done for a competitive price of ones you can order. He is also turning out some nice stuff on the plasma table he bought. Seems to be doing lots of custom work for a local utv racing team.

TruckBoatTruck · Post by **TruckBoatTruck** » Sun Oct 23, 2016 7:23 pm

I am interested. It fits 2015 correct?

Jnallison · Post by **Jnallison** » Mon Oct 24, 2016 10:35 am

laramieskibum · Post by **laramieskibum** » Wed Oct 26, 2016 6:08 pm

I'm interested. I will have to modify them for the aev lift but able and willing. Also can travel to grand junction

flatlandermo · Post by **flatlandermo** » Wed Oct 26, 2016 11:10 pm

I am very interested. Will take the if the guys ahead of me do not.

Thanks.

Jnallison · Post by **Jnallison** » Sun Nov 06, 2016 6:29 pm

I will bring them to GJ next week on my way to Denver for $800. Not a penny less and I will be in a bit of a hurry so we would have to meet and swap. Give me a call 505-860-1003

laramieskibum · Post by **laramieskibum** » Wed Nov 09, 2016 11:08 am

Work is crazy. Cannot make it to gj this weekend. Please give these other folks a chance at them. Sorry for delay.

Jnallison · Post by **Jnallison** » Wed Nov 09, 2016 11:37 am

Any takers?

Jnallison · Post by **Jnallison** » Thu Nov 17, 2016 3:51 pm

Power Wagon Registry