Looking for a PW

Buy / Sell / Trade - Got something to get rid of, or are looking for something specific?
User avatar
ldgregory
Site Admin
Site Admin
Posts: 629
Joined: Wed May 16, 2012 8:29 am
Location: Albuquerque, NM
Contact:

Looking for a PW

Post by ldgregory » Tue Jun 05, 2012 11:09 pm

If you guys see one for sale in the SouthWest, please post. I've got a buddy seriously looking.
2005 Dodge Power Wagon #9-05-0536

Join the Power Wagon Registry

Mods: 35" BFG KM2s, Locker Bypass, Blacked Out Cab Lights & 3rd Brake Light, Airhorns, Custom headache / rotating light rack, Interceptor Bug Deflector w/Eyebrows, Lund in-channel Vent Visors, UbiquiRack, Mounted shovel and axe in bed with Quick Fist clamps, Silverstar replacements for fogs and driving lights, Hella 500s behind the grill, Inclinometer, Mopar rock rails (didn't have them when I bought it), 1500W inverter with secondary battery in bed, tinted windows, chopped muffler.

Next Mods:
Wetsuit/BC drying hanger, high idle, black badges

User avatar
chromedragon
50_Posts
50_Posts
Posts: 144
Joined: Thu May 31, 2012 2:20 pm
Contact:

Re: Looking for a PW

Post by chromedragon » Fri Jun 15, 2012 10:13 pm

2006 Power Wagon Quad Cab Manual Moto Rims stock size, Cooper ATP, Dynatrac Ball joints, Dynatrac Free spin kit with Warn hubs, AmSteel blue 7/16 x 100' synthetics rope from Custom splice, Sony BT 602 stereo and backup camera etc. Rancho 9000XL adjustable shocks.

Special Licenses:
FAA Airframe and Power Plant
FCC Technician (Ham) KK6YCI

“An armed society is a polite society. Manners are good when one may have to back up his acts with his life.”
"No statement should be believed because it is made by an authority.

Robert A. Heinlein

User avatar
ldgregory
Site Admin
Site Admin
Posts: 629
Joined: Wed May 16, 2012 8:29 am
Location: Albuquerque, NM
Contact:

Looking for a PW

Post by ldgregory » Fri Jun 15, 2012 10:54 pm

chromedragon wrote:Found this in phoenix.

http://www.carmax.com/enus/view-car/def ... d47ac922d6
Thanks. Forwarded it on.


Sent from my iPhone using Tapatalk over a 300 baud Racal-Vadic Acoustically Coupled Modem.
2005 Dodge Power Wagon #9-05-0536

Join the Power Wagon Registry

Mods: 35" BFG KM2s, Locker Bypass, Blacked Out Cab Lights & 3rd Brake Light, Airhorns, Custom headache / rotating light rack, Interceptor Bug Deflector w/Eyebrows, Lund in-channel Vent Visors, UbiquiRack, Mounted shovel and axe in bed with Quick Fist clamps, Silverstar replacements for fogs and driving lights, Hella 500s behind the grill, Inclinometer, Mopar rock rails (didn't have them when I bought it), 1500W inverter with secondary battery in bed, tinted windows, chopped muffler.

Next Mods:
Wetsuit/BC drying hanger, high idle, black badges

JCC
Posts: 8
Joined: Tue Jun 26, 2012 7:46 pm

Re: Looking for a PW

Post by JCC » Tue Jun 26, 2012 7:56 pm

if your friend is still looking, heres one for him to check out, http://visalia.craigslist.org/cto/2975891420.html

User avatar
GunniPWguy
500_Posts
500_Posts
Posts: 954
Joined: Fri May 25, 2012 11:52 am

Re: Looking for a PW

Post by GunniPWguy » Mon Aug 06, 2012 6:22 pm

JCC wrote:if your friend is still looking, heres one for him to check out, http://visalia.craigslist.org/cto/2975891420.html
That link doesn't show anything. On another note. I have been entertaining the thought of (do I dare say this) :winchmob: selling Christine :run:
Came to the realization that I may need a narrower/smaller trail rig after this weekends pinstriping. Nothing that can't be buffed out though. :D

NADA link. http://www.nadaguides.com/Cars/2005/Dod ... -Equipment
Attachments
IMG_1160.JPG
2005 Black Pow Wagon mods: DT Profab Steering Brace, Gibson superflow catback single exhaust system, Locker Bypass, Moog ball joints (see how long they last), New OEM track bar bushings, T-steering upgrade w/ Bilstein 5100 steering damper, Power everything, Heated leather seats, (keeps the better half happy), Rear window defrost, Bilstein 5100 shocks, 35x12.5x17 Toyo AT2 Extremes, Customized H2 alloy wheels, Original rock rails with family friendly steps welded on, Tri fold tonneau, Hi-lift extreme jack, Tool box along with all the essential PW gear. New winch cable, Winch TPS bypass, Cardan joint grease zerk discovery. New front grille assembly. Magnesium Chloride under coating.

If you ever happen to see me running somewhere, you should start running too. :)

User avatar
GunniPWguy
500_Posts
500_Posts
Posts: 954
Joined: Fri May 25, 2012 11:52 am

Re: Looking for a PW

Post by GunniPWguy » Tue Aug 07, 2012 11:06 pm

Dang. Thought I would at least get someone telling me I am lame! Still Love my truck btw. :roll:
2005 Black Pow Wagon mods: DT Profab Steering Brace, Gibson superflow catback single exhaust system, Locker Bypass, Moog ball joints (see how long they last), New OEM track bar bushings, T-steering upgrade w/ Bilstein 5100 steering damper, Power everything, Heated leather seats, (keeps the better half happy), Rear window defrost, Bilstein 5100 shocks, 35x12.5x17 Toyo AT2 Extremes, Customized H2 alloy wheels, Original rock rails with family friendly steps welded on, Tri fold tonneau, Hi-lift extreme jack, Tool box along with all the essential PW gear. New winch cable, Winch TPS bypass, Cardan joint grease zerk discovery. New front grille assembly. Magnesium Chloride under coating.

If you ever happen to see me running somewhere, you should start running too. :)

User avatar
GunniPWguy
500_Posts
500_Posts
Posts: 954
Joined: Fri May 25, 2012 11:52 am

Re: Looking for a PW

Post by GunniPWguy » Wed Aug 08, 2012 10:20 pm

here's one from today. 8-) Ya I still go to DT now and then. Habit. :twisted:
http://www.dodgetalk.com/forums/showthr ... ost4400171
2005 Black Pow Wagon mods: DT Profab Steering Brace, Gibson superflow catback single exhaust system, Locker Bypass, Moog ball joints (see how long they last), New OEM track bar bushings, T-steering upgrade w/ Bilstein 5100 steering damper, Power everything, Heated leather seats, (keeps the better half happy), Rear window defrost, Bilstein 5100 shocks, 35x12.5x17 Toyo AT2 Extremes, Customized H2 alloy wheels, Original rock rails with family friendly steps welded on, Tri fold tonneau, Hi-lift extreme jack, Tool box along with all the essential PW gear. New winch cable, Winch TPS bypass, Cardan joint grease zerk discovery. New front grille assembly. Magnesium Chloride under coating.

If you ever happen to see me running somewhere, you should start running too. :)

JCC
Posts: 8
Joined: Tue Jun 26, 2012 7:46 pm

Re: Looking for a PW

Post by JCC » Fri Sep 21, 2012 10:53 pm

heres one thats listed in Visaila California Craigslist. http://visalia.craigslist.org/cto/3283726475.html

User avatar
SilverWagon05
Moderator
Moderator
Posts: 562
Joined: Wed May 16, 2012 1:18 pm
Location: Rio Rancho, NM

Re: Looking for a PW

Post by SilverWagon05 » Fri Sep 21, 2012 11:57 pm

This one's down at the local dealer here in Farmington. Obviously the pic is not correct. It is white, with the lower half black and no badges. Haven't had a chance to go look at it, but I will soon.
http://www.advantagedodge.com/certified ... d0920b.htm
05 Silver QC Power Wagon / Auto
Pure Performance long arms, 6" Thuren soft ride coils, Walker Evans 2.0 Front and Fox 2.0 rear shocks, HD adj. track bar, 37/13.5/17 Toyo Open Country M/T's, 17x9 Moto Metal 951-black, dual-modified Amp Power steps, Custom rock sliders and front and rear tube bumpers, rear lower quarter panel delete, Challenger Narrow truck box - black, AEM Brute Force CAI, SC Flashpaq, Flowtech shorty headers, Gibson Extreme Dual Cat-Back (chopped), Line-X Bed liner, Locker bypass, Black locking Billet Gas filler door, WeatherTech smoked inchannel vent visors & floor liners, Recon LED smoked cab lights, smoked LED 3rd brake light, smoked LED tail lights, smoked projector headlights, Viair constant duty OBA, DOR steering box brace, PowerStop drilled & slotted rotors w/ ceramic pads, Spicer Life series front axle u-joints, DOR sway bar links, DOR steering linkage, Borgeson steering shaft and steering gear, PSC Hydro-assist, Thuren adjustable shackles, leaf spring bracket modification, coil retainer modification, Spyntech Shorty Free Spin conversion, custom long travel heavy duty front drive shaft, Rock crusher rear diff cover, Carli front diff guard, Masterpull synthetic winch rope, 2-6" KC 130w Longrange lights behind the grill, 100w fog lights, 55w floodlights mounted on rear bumper, High/Low/Fog all-on mod, Pioneer head unit, MTX Thunderform with 2-10's, Tekonsha P3 brake controller, Timbren SES.

User avatar
ldgregory
Site Admin
Site Admin
Posts: 629
Joined: Wed May 16, 2012 8:29 am
Location: Albuquerque, NM
Contact:

Re: Looking for a PW

Post by ldgregory » Tue Sep 25, 2012 8:18 am

Cool, I let Ted know. I also emailed the guys to make sure it really was a power wagon as the listing didn't match.
2005 Dodge Power Wagon #9-05-0536

Join the Power Wagon Registry

Mods: 35" BFG KM2s, Locker Bypass, Blacked Out Cab Lights & 3rd Brake Light, Airhorns, Custom headache / rotating light rack, Interceptor Bug Deflector w/Eyebrows, Lund in-channel Vent Visors, UbiquiRack, Mounted shovel and axe in bed with Quick Fist clamps, Silverstar replacements for fogs and driving lights, Hella 500s behind the grill, Inclinometer, Mopar rock rails (didn't have them when I bought it), 1500W inverter with secondary battery in bed, tinted windows, chopped muffler.

Next Mods:
Wetsuit/BC drying hanger, high idle, black badges

RustyPW
2000_Posts
2000_Posts
Posts: 5439
Joined: Thu May 24, 2012 4:23 pm
Model Year: 2008
Location: Brownsville Pa.

Re: Looking for a PW

Post by RustyPW » Tue Sep 25, 2012 2:12 pm

Hey, is this the same Ted from Moab? If it is, cool. Tell him it's about time. :lol:
PWOC #53
2008 POWER WAGON RC

My build thread. http://forum.powerwagonregistry.org/vie ... =13&t=2826 :cash: :cash:

Moab '09, '10, '12, '14.
Rausch Creek - Summer '10, Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18, Summer '20, Summer '22,
AOAA Summer '19.

Russ
NRA - Benefactor, Golden Eagle. :lockedandloaded:

User avatar
SilverWagon05
Moderator
Moderator
Posts: 562
Joined: Wed May 16, 2012 1:18 pm
Location: Rio Rancho, NM

Re: Looking for a PW

Post by SilverWagon05 » Tue Sep 25, 2012 2:50 pm

ldgregory wrote:Cool, I let Ted know. I also emailed the guys to make sure it really was a power wagon as the listing didn't match.
I got a quick look at it the other day, passing by and it was definitely a PW. That online listing is the only one that matches the truck, but the pic is not right. They actually have quite a few trucks there with different pics on the web site. I'll post a pic of a sweet 1/2 ton they have there and the listing that doesn't do it justice. They moved all the used vehicles for the 4x4 show last weekend so that PW is nowhere to be seen now. May have sold. They disappear pretty quick around here.
05 Silver QC Power Wagon / Auto
Pure Performance long arms, 6" Thuren soft ride coils, Walker Evans 2.0 Front and Fox 2.0 rear shocks, HD adj. track bar, 37/13.5/17 Toyo Open Country M/T's, 17x9 Moto Metal 951-black, dual-modified Amp Power steps, Custom rock sliders and front and rear tube bumpers, rear lower quarter panel delete, Challenger Narrow truck box - black, AEM Brute Force CAI, SC Flashpaq, Flowtech shorty headers, Gibson Extreme Dual Cat-Back (chopped), Line-X Bed liner, Locker bypass, Black locking Billet Gas filler door, WeatherTech smoked inchannel vent visors & floor liners, Recon LED smoked cab lights, smoked LED 3rd brake light, smoked LED tail lights, smoked projector headlights, Viair constant duty OBA, DOR steering box brace, PowerStop drilled & slotted rotors w/ ceramic pads, Spicer Life series front axle u-joints, DOR sway bar links, DOR steering linkage, Borgeson steering shaft and steering gear, PSC Hydro-assist, Thuren adjustable shackles, leaf spring bracket modification, coil retainer modification, Spyntech Shorty Free Spin conversion, custom long travel heavy duty front drive shaft, Rock crusher rear diff cover, Carli front diff guard, Masterpull synthetic winch rope, 2-6" KC 130w Longrange lights behind the grill, 100w fog lights, 55w floodlights mounted on rear bumper, High/Low/Fog all-on mod, Pioneer head unit, MTX Thunderform with 2-10's, Tekonsha P3 brake controller, Timbren SES.

User avatar
SilverWagon05
Moderator
Moderator
Posts: 562
Joined: Wed May 16, 2012 1:18 pm
Location: Rio Rancho, NM

Re: Looking for a PW

Post by SilverWagon05 » Tue Sep 25, 2012 2:56 pm

Here's the listing for the 1/2 ton.
http://www.advantagedodge.com/used/Ram/ ... fb0cf5.htm

And here's an actual pic of the truck.
ImageUploadedByTapatalk1348599296.082391.jpg
IFS would have to go, but other than that, I think this is one badass little truck. It's sitting on 37's.


Sent from my iPad using Tapatalk
05 Silver QC Power Wagon / Auto
Pure Performance long arms, 6" Thuren soft ride coils, Walker Evans 2.0 Front and Fox 2.0 rear shocks, HD adj. track bar, 37/13.5/17 Toyo Open Country M/T's, 17x9 Moto Metal 951-black, dual-modified Amp Power steps, Custom rock sliders and front and rear tube bumpers, rear lower quarter panel delete, Challenger Narrow truck box - black, AEM Brute Force CAI, SC Flashpaq, Flowtech shorty headers, Gibson Extreme Dual Cat-Back (chopped), Line-X Bed liner, Locker bypass, Black locking Billet Gas filler door, WeatherTech smoked inchannel vent visors & floor liners, Recon LED smoked cab lights, smoked LED 3rd brake light, smoked LED tail lights, smoked projector headlights, Viair constant duty OBA, DOR steering box brace, PowerStop drilled & slotted rotors w/ ceramic pads, Spicer Life series front axle u-joints, DOR sway bar links, DOR steering linkage, Borgeson steering shaft and steering gear, PSC Hydro-assist, Thuren adjustable shackles, leaf spring bracket modification, coil retainer modification, Spyntech Shorty Free Spin conversion, custom long travel heavy duty front drive shaft, Rock crusher rear diff cover, Carli front diff guard, Masterpull synthetic winch rope, 2-6" KC 130w Longrange lights behind the grill, 100w fog lights, 55w floodlights mounted on rear bumper, High/Low/Fog all-on mod, Pioneer head unit, MTX Thunderform with 2-10's, Tekonsha P3 brake controller, Timbren SES.

User avatar
04Ram2500Hemi
2000_Posts
2000_Posts
Posts: 2212
Joined: Thu May 31, 2012 12:19 pm
Model Year: 2012
Location: Missoula, MT

Re: Looking for a PW

Post by 04Ram2500Hemi » Wed Sep 26, 2012 10:08 pm

This one is on DT and is pretty sharp. Wrong area but looks nice.
http://www.dodgetalk.com/forums/showthr ... did=362665
Gone but Never Forgotten
2012 Ram Power Wagon: viewtopic.php?f=13&t=107
Truxedo Deuce Bed Cover with Bed Lights, Black Line-X Rocker Panel, Custom Built Rock Rails Sprayed with Line-X, Front & Rear Bumper and Grill sprayed with Line-X, Husky Mud Flaps, Husky Floor Mats, Four VisionX Xmitter Low Pro Prime XP LED Light Bars Behind the Grill, LED Lights Mounted in the Rear Bumper, Heated Seats, Interior LED Lighting, NAV-TV, Camera Mounted in Front Grill, Custom Headache Rack, AEV Raised Air Intake, AEV Salta HD Wheels in Onyx, 285/75/17 Cooper Discoverer AT3

bandit 1
Posts: 40
Joined: Tue Sep 25, 2012 7:04 pm
Model Year: 2010

Re: Looking for a PW

Post by bandit 1 » Sat Sep 29, 2012 9:24 pm

I have a 06 red one you can buy if you want any pics text me at 952 xxx-xxxx (Edited by Leif so you don't end up with all sorts of telemarketer calls and spam text.)

User avatar
ldgregory
Site Admin
Site Admin
Posts: 629
Joined: Wed May 16, 2012 8:29 am
Location: Albuquerque, NM
Contact:

Re: Looking for a PW

Post by ldgregory » Sun Sep 30, 2012 10:36 pm

bandit 1 wrote:I have a 06 red one you can buy if you want any pics text me at 952 xxx-xxxx
Got any details on it? Mileage location etc.
2005 Dodge Power Wagon #9-05-0536

Join the Power Wagon Registry

Mods: 35" BFG KM2s, Locker Bypass, Blacked Out Cab Lights & 3rd Brake Light, Airhorns, Custom headache / rotating light rack, Interceptor Bug Deflector w/Eyebrows, Lund in-channel Vent Visors, UbiquiRack, Mounted shovel and axe in bed with Quick Fist clamps, Silverstar replacements for fogs and driving lights, Hella 500s behind the grill, Inclinometer, Mopar rock rails (didn't have them when I bought it), 1500W inverter with secondary battery in bed, tinted windows, chopped muffler.

Next Mods:
Wetsuit/BC drying hanger, high idle, black badges

jim1042
Posts: 1
Joined: Tue Oct 02, 2012 9:42 pm

Re: Looking for a PW

Post by jim1042 » Tue Oct 02, 2012 9:55 pm

Sorry this is my first post, but....

I am the first owner of a 2005 Quad Cab Power Wagon that I just got a hair up my butt to trade in on a new 2012 Laramie Power Wagon. It is white with 73,000 miles and is almost spotless. It has leather seats, black hard tonneau cover, rear seat headrest DVDs, almost every thing offered with the truck except sunroof. I would post a picture, as I took bunches today, but I don’t know how ??

I am in Florida and plan on possible driving it to Michigan this weekend to make deal on new truck.

I will send as many photos as you like, if interested.

Jim

bandit 1
Posts: 40
Joined: Tue Sep 25, 2012 7:04 pm
Model Year: 2010

Re: Looking for a PW

Post by bandit 1 » Wed Oct 03, 2012 3:47 pm

Just rolled over 100k it has every option dvd nav heated leather seats heated tow mirrors its in MN if you want anymore info let me know.

User avatar
ldgregory
Site Admin
Site Admin
Posts: 629
Joined: Wed May 16, 2012 8:29 am
Location: Albuquerque, NM
Contact:

Re: Looking for a PW

Post by ldgregory » Thu Oct 04, 2012 8:55 am

He has since gotten a bit more specific. He's looking for a 2009 PW. He's wanting the latest year he can get without hitting a 4th gen truck because he doesn't want the extra wheelbase.
2005 Dodge Power Wagon #9-05-0536

Join the Power Wagon Registry

Mods: 35" BFG KM2s, Locker Bypass, Blacked Out Cab Lights & 3rd Brake Light, Airhorns, Custom headache / rotating light rack, Interceptor Bug Deflector w/Eyebrows, Lund in-channel Vent Visors, UbiquiRack, Mounted shovel and axe in bed with Quick Fist clamps, Silverstar replacements for fogs and driving lights, Hella 500s behind the grill, Inclinometer, Mopar rock rails (didn't have them when I bought it), 1500W inverter with secondary battery in bed, tinted windows, chopped muffler.

Next Mods:
Wetsuit/BC drying hanger, high idle, black badges

User avatar
Joobs
Posts: 4
Joined: Thu Jul 05, 2012 12:47 pm
Location: NAS Fallon, NV

Re: Looking for a PW

Post by Joobs » Thu Nov 08, 2012 5:00 pm

there is currently a power wagon for sale in fallon, nv at the local toyota/ford dealership. not sure of asking price, looks like a 2006-07. it is red and lifted a little.
2010 white pw, aem cold air, bully dog programer, custome made rear bumper, custome headache rack with 6 kc daylighters.

rgory
Posts: 47
Joined: Sun Nov 11, 2012 4:13 pm

Re: Looking for a PW

Post by rgory » Sun Nov 11, 2012 4:21 pm

After selling my 06 Pw I am once again in the market for a PW, on a budget. I am looking for a good "deal" or perhaps a small project truck, if anyone has anything for sale or sees anything please let me know.

Thanks,

Ryan

User avatar
SilverWagon05
Moderator
Moderator
Posts: 562
Joined: Wed May 16, 2012 1:18 pm
Location: Rio Rancho, NM

Re: Looking for a PW

Post by SilverWagon05 » Mon Nov 12, 2012 9:10 pm

It's been a long time. Welcome back. :cheers:
05 Silver QC Power Wagon / Auto
Pure Performance long arms, 6" Thuren soft ride coils, Walker Evans 2.0 Front and Fox 2.0 rear shocks, HD adj. track bar, 37/13.5/17 Toyo Open Country M/T's, 17x9 Moto Metal 951-black, dual-modified Amp Power steps, Custom rock sliders and front and rear tube bumpers, rear lower quarter panel delete, Challenger Narrow truck box - black, AEM Brute Force CAI, SC Flashpaq, Flowtech shorty headers, Gibson Extreme Dual Cat-Back (chopped), Line-X Bed liner, Locker bypass, Black locking Billet Gas filler door, WeatherTech smoked inchannel vent visors & floor liners, Recon LED smoked cab lights, smoked LED 3rd brake light, smoked LED tail lights, smoked projector headlights, Viair constant duty OBA, DOR steering box brace, PowerStop drilled & slotted rotors w/ ceramic pads, Spicer Life series front axle u-joints, DOR sway bar links, DOR steering linkage, Borgeson steering shaft and steering gear, PSC Hydro-assist, Thuren adjustable shackles, leaf spring bracket modification, coil retainer modification, Spyntech Shorty Free Spin conversion, custom long travel heavy duty front drive shaft, Rock crusher rear diff cover, Carli front diff guard, Masterpull synthetic winch rope, 2-6" KC 130w Longrange lights behind the grill, 100w fog lights, 55w floodlights mounted on rear bumper, High/Low/Fog all-on mod, Pioneer head unit, MTX Thunderform with 2-10's, Tekonsha P3 brake controller, Timbren SES.

User avatar
ldgregory
Site Admin
Site Admin
Posts: 629
Joined: Wed May 16, 2012 8:29 am
Location: Albuquerque, NM
Contact:

Re: Looking for a PW

Post by ldgregory » Mon Nov 12, 2012 10:26 pm

SilverWagon05 wrote:It's been a long time. Welcome back. :cheers:
Start :poke: him to see if he might be interested in making locker bypass plug-n-plays again!!
:run:
2005 Dodge Power Wagon #9-05-0536

Join the Power Wagon Registry

Mods: 35" BFG KM2s, Locker Bypass, Blacked Out Cab Lights & 3rd Brake Light, Airhorns, Custom headache / rotating light rack, Interceptor Bug Deflector w/Eyebrows, Lund in-channel Vent Visors, UbiquiRack, Mounted shovel and axe in bed with Quick Fist clamps, Silverstar replacements for fogs and driving lights, Hella 500s behind the grill, Inclinometer, Mopar rock rails (didn't have them when I bought it), 1500W inverter with secondary battery in bed, tinted windows, chopped muffler.

Next Mods:
Wetsuit/BC drying hanger, high idle, black badges

rgory
Posts: 47
Joined: Sun Nov 11, 2012 4:13 pm

Re: Looking for a PW

Post by rgory » Tue Nov 27, 2012 10:39 pm

There is the perfect truck for sale right now on DT

Be nice to get my crap together before it sells...

User avatar
w2dodge
500_Posts
500_Posts
Posts: 964
Joined: Mon May 21, 2012 4:57 pm
Location: nj..ny

Re: Looking for a PW

Post by w2dodge » Wed Nov 28, 2012 9:05 am

There's a mint 05 black with
20.000 miles on ebay

Post Reply