MJockey wrote: ↑
Mon Jul 02, 2018 1:29 pm
That's one heavy jeep.
It's not the weight of the jeep. Its the pull power of the winch. If you have a 4000lb jeep its stuck factor varies and increases the force needed to pull it. Gravity, angles, hills, terrain, what your actually stuck on or in (mud, sand, snow, etc.). What won't change is how hard your winch can pull at max. Beyond that you have to add mechanical advantage to increase what your winch can do. You just have to know where the forces are being applied so you don't over work your weakest piece. And rule of thumb I've seen for winches is they should be between 1.5 and 2x the weight of the vehicle they are mounted on.
2016 Granite Crystal Metallic Power Wagon Laramie, no graphics, debadged, Thuren front and rear coils, Traxada rear 1 inch spacer, Thuren rear swaybar links, Thuren rear trackbar, King 3.0 (Stage 4) front shocks, King 2.5 (Stage 3) rear shocks, Boogie front bump stops, Toyo RT 37x12.5R17 on Raceline Avenger 17x9 +20 wheels, DOR steering brace, Thuren King Steering Damper, White Knuckle rock sliders, Dethloff skid plate, Purple Cranium Half Spider front and rear diff guards, Airlift Ultimate airbags with Daystar cradles, Bakflip Revolver X2 tonneau, AMP BedStep, Factor55 Ultrahook with 100ft 7/16 synthetic winch line, Zroadz Grill with slim 20 inch light bar, DDM Tuning LEDs/HIDs, Magnaflow 19200 modified with upgraded resonator and after axle dump, tinted front windows 35%.