Power Wagon Registry

No tire stays at it’s manufactured diameter when you set 2,000lbs on it

JamesWyatt wrote: ↑

Sat Jul 14, 2018 1:36 pm

Thanks to everyone for the advice and all the help with this. Here's how it ended up! I'll post more in the official Power Wagon Picture Thread.

_DSF4594.jpg

Great photo man, the truck looks so clean.

TankerZak wrote: ↑

Sat Jul 14, 2018 4:13 pm

Shaved Ice wrote: ↑

Sat Jul 14, 2018 12:24 pm

JamesWyatt wrote: ↑

Fri Jul 13, 2018 10:42 am

Exactly what I'm hoping for! I went with the AEV wheel because they state it will allow fitment of 37s, and they didn't mention cutting being required...

I remember reading it had to be a 37” BFG KO2 because they run small. Toyos run true to size or even bigger. This is probably where the discrepancies are coming from.

I've never seen a true to size tire.. hell i think my 37s are actually 35.75 when run at a reasonable pressure. They are 36.5 before you put the truck on em.

BFG is notorious for being smaller than other brands in the same sizes. I think the consensus is Toyos run “closer to true size”, but not “true”.

EasyDoesIt wrote: ↑

Sat Jul 14, 2018 5:33 pm

JamesWyatt wrote: ↑

Sat Jul 14, 2018 1:36 pm

Thanks to everyone for the advice and all the help with this. Here's how it ended up! I'll post more in the official Power Wagon Picture Thread.

_DSF4594.jpg

Great photo man, the truck looks so clean.

Thanks, hopefully it won’t be clean for long

Good looking truck jameswyatt.i know this has most likely been answered and or bet to death, but how much more offset do the aev rim have than stock . Thanks

Easttnrhino wrote: ↑

Wed Aug 01, 2018 5:30 am

Good looking truck jameswyatt.i know this has most likely been answered and or bet to death, but how much more offset do the aev rim have than stock . Thanks

I've seen conflicting numbers, but I think the current PW rims are +44, or thereabouts. The AEV Ram wheels are +27. So about 17mm less offset than stock.

Low_Sky wrote: ↑

Wed Aug 01, 2018 1:28 pm

Easttnrhino wrote: ↑

Wed Aug 01, 2018 5:30 am

Good looking truck jameswyatt.i know this has most likely been answered and or bet to death, but how much more offset do the aev rim have than stock . Thanks

I've seen conflicting numbers, but I think the current PW rims are +44, or thereabouts. The AEV Ram wheels are +27. So about 17mm less offset than stock.

Thuren suggests the Power Wagon wheel is from +42mm to +57mm (odd to list a range, but he does) - I bet the AEV offset is better than a lot of the guys who go with +18mm since they stick out less.

Oh crazy, subforums... I though the AEV's were +18. I'm looking at CJC's custom (cheap) raceline for dodge which are +20 for 37's.

At +18 your right ontop of the pinch seem. At +20 i didn't have to trim but i get some very very very slight rubbing (like radio off to hear it) at hard lock. I think it's still the sway bar. AEVs are +27 so you'll probably get some light rubbing in the same places. Best for no rub chance is probably +18 and a willingness to modify the pinch seem a hair. (And a 12.5 wide tire)

Sent from my SM-G955U using Tapatalk

Original Cooper STT tread pattern https://www.summitracing.com/parts/coo- ... gJl4fD_BwE

Toyo Open Country M/T trad pattern https://www.walmart.com/ip/Toyo-Open-Co ... 3=&veh=sem

Very similar.