how to: '14+ 11.5" pinion seal

Member Builds How-To's
User avatar
nts007
2000_Posts
2000_Posts
Posts: 2283
Joined: Wed Dec 11, 2013 10:01 pm
Model Year: 2008
Location: Sask, Canada, Earth

Re: how to: '14+ 11.5" pinion seal

Post by nts007 » Tue Jun 27, 2017 8:41 am

Shit man nobody's arguing you did a good job!! Your write up is awesome. Just the opinion you went through far more steps than needed especially on a brand new axle. What you did is something I would do on an axle with 400-500k on it. The 1/8" nut rotation over mark is for thread stretch. Once it's been removed it loses its preload at that exact point. So bringing it back to the mark no longer has any preload. And this thread no matter how hashed it seems is an excellent thread for everyone looking at it. Debate and conversation is always a good thing. Like you said early on. Ask 10 people get 10 answers. Not all right or wrong
08 ctd--mini max--thuren 3" coils and LT Leaves--4.56 gears and lockers in pw axles--some lights--afe intake system--bd super b turbo--Banks w/m Injection--Dynatrac Balljoints--king 2.5"s--37" Hankook Dynapro MT--DOR Long arms--Custom emf track bar--Manual T-case swap--Full PW Under armor--PSC Hydro Assist and so much more

cb1987
50_Posts
50_Posts
Posts: 88
Joined: Sun Feb 12, 2017 8:46 pm
Model Year: 2014

Re: how to: '14+ 11.5" pinion seal

Post by cb1987 » Tue Jun 27, 2017 11:17 am

nts007 wrote:. Ask 10 people get 10 answers.
thats why i put that statement right at the begining. sort of a disclaimer if you will. the reader can determine what steps and tools are necesarry

User avatar
DamageWagon
Vendor
Vendor
Posts: 1916
Joined: Tue Oct 11, 2016 1:21 am
Model Year: 2011

Re: how to: '14+ 11.5" pinion seal

Post by DamageWagon » Tue Jun 27, 2017 11:52 am

Let's see if the new seal and bearing gives a few hundred thousand miles great job dude.

RustyPW
2000_Posts
2000_Posts
Posts: 4071
Joined: Thu May 24, 2012 4:23 pm
Model Year: 2008
Location: Brownsville Pa.

Re: how to: '14+ 11.5" pinion seal

Post by RustyPW » Tue Jun 27, 2017 6:57 pm

You 4G's guys argue over everything. :popcorn:
PWOC #53
2008 POWER WAGON RC
Mods to the PW; Nerffed Mopar RockRails, Wheel Well Liners, Bushwacker Pocket Fender Flairs, Garvmin dezl 560LMT GPS, Power Wagon Winch Kit, Line X Ultra Bed Liner, PIAA Headlight Bulbs, PIAA 580 Driving Lights (135 watt), PIAA 520 Fog Lights (135 watt), PIAA 520 ATP Off-Road Lights (135 watt), Locker Bypass, Modifed Rockcrusher Diff Covers, Mopar Utility Bed Rails and Tool Box, Warn Winch Wireless Remote Control, "el-cheapo" Inclinometer, Airaid CAI, Winch TPS Bypass, 35" Toyo's, Mopar Spare Tire Lock, 'T' Steering Linkage, Modifed PSC Steering Brace, P3 Brake Controller, Modifed Fusion "mall crawler" rear bumper , PIAA 1500 Back-Up Lights, 1Ton HEMI Tranny Cooler, Leer 100XR Bed Cap, Factory Tow Mirrors, CenterLine Rims 17x9-5.25 BS, Mag-Hytec Tranny Pan, AutoMeter Gauges, PSC Extreme Hydro Assist Steering, Carli G2 Track Bar, Carli Ball-Joints, Dynatrac FreeSpin Hubs, Snorkel, RCV Axles, EBC Pads & Rotors, Aluminess Front Bumper, BIG Pul-Pal, 60" Extreme Hi-lift Jack, and more riggin' equipment, Carli Long Travel Air Bags, Bilstein 7100 Shocks - Carli Valving, Carli Control Arms, Thuren 3" SoftRide Springs, Thuren Rear Shackles, MagnaFlow Muffler, Crown Stainless Brake Lines, MORE STUFF COMIN'.

Moab '10, '12, '14.
Rausch Creek Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18,
Russ NRA Benefactor Member

User avatar
Bill2014
500_Posts
500_Posts
Posts: 929
Joined: Fri May 09, 2014 9:03 pm
Model Year: 2014
Location: Northern NY

Re: how to: '14+ 11.5" pinion seal

Post by Bill2014 » Tue Jun 27, 2017 7:06 pm

RustyPW wrote:You 4G's guys argue over everything. :popcorn:
It's "debating". There are some master debaters among us. :rockon:
2014 Power Wagon Laramie
Titan V5 2.5" Receiver Pintle Hook
Warn wireless winch controller
.188" DOM White Knuckle Rock Sliders
Locker Bypass

Moab 2006

Colibri
1000_Posts
1000_Posts
Posts: 1547
Joined: Mon Jun 08, 2015 5:44 pm
Model Year: 2009

Re: how to: '14+ 11.5" pinion seal

Post by Colibri » Tue Jun 27, 2017 7:25 pm

This is how I picture mikekey and reloaderguy
Attachments
IMG_5281.JPG
IMG_5281.JPG (36.13 KiB) Viewed 1143 times
Central Texas and Houston area
2009 5.7 auto quadcab
Carli 3” coils deaver leafs 3” kings with 4 tube bypass rear and fr/rr hydro bumps
Howe steering pump and gear with hydraulic ram assist
Custom tube bumpers and white knuckle sliders
Creative fab trussed axle. rem polished and cryoed 5.13 gears with arb lockers fr/rr
Sharadon stage 2 545rfe with 3000 stall edge converter
Lots of other stuff lol

User avatar
Reloaderguy
1000_Posts
1000_Posts
Posts: 1924
Joined: Tue Feb 09, 2016 8:06 am
Model Year: 2016
Location: Central Oregon

Re: how to: '14+ 11.5" pinion seal

Post by Reloaderguy » Tue Jun 27, 2017 7:26 pm

Colibri wrote:This is how I picture mikekey and reloaderguy
Mike is pretty short.
Best Year Power Wagon

RustyPW
2000_Posts
2000_Posts
Posts: 4071
Joined: Thu May 24, 2012 4:23 pm
Model Year: 2008
Location: Brownsville Pa.

Re: how to: '14+ 11.5" pinion seal

Post by RustyPW » Tue Jun 27, 2017 7:30 pm

Bill2014 wrote:
RustyPW wrote:You 4G's guys argue over everything. :popcorn:
It's "debating". There are some masterbaters among us. :rockon:
Fixed it.
PWOC #53
2008 POWER WAGON RC
Mods to the PW; Nerffed Mopar RockRails, Wheel Well Liners, Bushwacker Pocket Fender Flairs, Garvmin dezl 560LMT GPS, Power Wagon Winch Kit, Line X Ultra Bed Liner, PIAA Headlight Bulbs, PIAA 580 Driving Lights (135 watt), PIAA 520 Fog Lights (135 watt), PIAA 520 ATP Off-Road Lights (135 watt), Locker Bypass, Modifed Rockcrusher Diff Covers, Mopar Utility Bed Rails and Tool Box, Warn Winch Wireless Remote Control, "el-cheapo" Inclinometer, Airaid CAI, Winch TPS Bypass, 35" Toyo's, Mopar Spare Tire Lock, 'T' Steering Linkage, Modifed PSC Steering Brace, P3 Brake Controller, Modifed Fusion "mall crawler" rear bumper , PIAA 1500 Back-Up Lights, 1Ton HEMI Tranny Cooler, Leer 100XR Bed Cap, Factory Tow Mirrors, CenterLine Rims 17x9-5.25 BS, Mag-Hytec Tranny Pan, AutoMeter Gauges, PSC Extreme Hydro Assist Steering, Carli G2 Track Bar, Carli Ball-Joints, Dynatrac FreeSpin Hubs, Snorkel, RCV Axles, EBC Pads & Rotors, Aluminess Front Bumper, BIG Pul-Pal, 60" Extreme Hi-lift Jack, and more riggin' equipment, Carli Long Travel Air Bags, Bilstein 7100 Shocks - Carli Valving, Carli Control Arms, Thuren 3" SoftRide Springs, Thuren Rear Shackles, MagnaFlow Muffler, Crown Stainless Brake Lines, MORE STUFF COMIN'.

Moab '10, '12, '14.
Rausch Creek Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18,
Russ NRA Benefactor Member

User avatar
DamageWagon
Vendor
Vendor
Posts: 1916
Joined: Tue Oct 11, 2016 1:21 am
Model Year: 2011

Re: how to: '14+ 11.5" pinion seal

Post by DamageWagon » Tue Jun 27, 2017 7:31 pm

RustyPW wrote:
Bill2014 wrote:
RustyPW wrote:You 4G's guys argue over everything. :popcorn:
It's "debating". There are some masterbaters among us. :rockon:
Fixed it.
It's all the same thing when it's over an online forum anyways...

Colibri
1000_Posts
1000_Posts
Posts: 1547
Joined: Mon Jun 08, 2015 5:44 pm
Model Year: 2009

Re: how to: '14+ 11.5" pinion seal

Post by Colibri » Tue Jun 27, 2017 7:33 pm

Likeable curmudgeons the whole lot of ya' fourth gen guys
Central Texas and Houston area
2009 5.7 auto quadcab
Carli 3” coils deaver leafs 3” kings with 4 tube bypass rear and fr/rr hydro bumps
Howe steering pump and gear with hydraulic ram assist
Custom tube bumpers and white knuckle sliders
Creative fab trussed axle. rem polished and cryoed 5.13 gears with arb lockers fr/rr
Sharadon stage 2 545rfe with 3000 stall edge converter
Lots of other stuff lol

User avatar
olyelr
2000_Posts
2000_Posts
Posts: 3089
Joined: Sun Dec 07, 2014 9:00 pm
Model Year: 2016
Location: Kewadin, MI

Re: how to: '14+ 11.5" pinion seal

Post by olyelr » Tue Jun 27, 2017 7:46 pm

Colibri wrote:Likeable curmudgeons the whole lot of ya' fourth gen guys

Im not old or cranky, but I do have a lot of grey hair coming in.
2016 Ram Power Wagon Laramie - Granite Crystal Metallic - Ramboxes :patriot:

RustyPW
2000_Posts
2000_Posts
Posts: 4071
Joined: Thu May 24, 2012 4:23 pm
Model Year: 2008
Location: Brownsville Pa.

Re: how to: '14+ 11.5" pinion seal

Post by RustyPW » Tue Jun 27, 2017 9:12 pm

Colibri wrote:Likeable curmudgeons the whole lot of ya' fourth gen guys

:rockon:
PWOC #53
2008 POWER WAGON RC
Mods to the PW; Nerffed Mopar RockRails, Wheel Well Liners, Bushwacker Pocket Fender Flairs, Garvmin dezl 560LMT GPS, Power Wagon Winch Kit, Line X Ultra Bed Liner, PIAA Headlight Bulbs, PIAA 580 Driving Lights (135 watt), PIAA 520 Fog Lights (135 watt), PIAA 520 ATP Off-Road Lights (135 watt), Locker Bypass, Modifed Rockcrusher Diff Covers, Mopar Utility Bed Rails and Tool Box, Warn Winch Wireless Remote Control, "el-cheapo" Inclinometer, Airaid CAI, Winch TPS Bypass, 35" Toyo's, Mopar Spare Tire Lock, 'T' Steering Linkage, Modifed PSC Steering Brace, P3 Brake Controller, Modifed Fusion "mall crawler" rear bumper , PIAA 1500 Back-Up Lights, 1Ton HEMI Tranny Cooler, Leer 100XR Bed Cap, Factory Tow Mirrors, CenterLine Rims 17x9-5.25 BS, Mag-Hytec Tranny Pan, AutoMeter Gauges, PSC Extreme Hydro Assist Steering, Carli G2 Track Bar, Carli Ball-Joints, Dynatrac FreeSpin Hubs, Snorkel, RCV Axles, EBC Pads & Rotors, Aluminess Front Bumper, BIG Pul-Pal, 60" Extreme Hi-lift Jack, and more riggin' equipment, Carli Long Travel Air Bags, Bilstein 7100 Shocks - Carli Valving, Carli Control Arms, Thuren 3" SoftRide Springs, Thuren Rear Shackles, MagnaFlow Muffler, Crown Stainless Brake Lines, MORE STUFF COMIN'.

Moab '10, '12, '14.
Rausch Creek Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18,
Russ NRA Benefactor Member

User avatar
BoldAdventure
Moderator
Moderator
Posts: 2035
Joined: Fri Mar 25, 2016 11:23 am
Model Year: 2015
Location: Nomadic
Contact:

Re: how to: '14+ 11.5" pinion seal

Post by BoldAdventure » Tue Jun 27, 2017 9:15 pm

Colibri wrote:This is how I picture mikekey and reloaderguy
This is how I picture turdgen owners :run:

Image
2015 Power Wagon Laramie - "ROCKLANDER"
[Build Thread] [Instagram] [Youtube]

Colibri
1000_Posts
1000_Posts
Posts: 1547
Joined: Mon Jun 08, 2015 5:44 pm
Model Year: 2009

Re: how to: '14+ 11.5" pinion seal

Post by Colibri » Tue Jun 27, 2017 9:31 pm

Hahahaha touché
Central Texas and Houston area
2009 5.7 auto quadcab
Carli 3” coils deaver leafs 3” kings with 4 tube bypass rear and fr/rr hydro bumps
Howe steering pump and gear with hydraulic ram assist
Custom tube bumpers and white knuckle sliders
Creative fab trussed axle. rem polished and cryoed 5.13 gears with arb lockers fr/rr
Sharadon stage 2 545rfe with 3000 stall edge converter
Lots of other stuff lol

User avatar
nts007
2000_Posts
2000_Posts
Posts: 2283
Joined: Wed Dec 11, 2013 10:01 pm
Model Year: 2008
Location: Sask, Canada, Earth

Re: how to: '14+ 11.5" pinion seal

Post by nts007 » Tue Jun 27, 2017 9:37 pm

That's some GREAT hair!!!
08 ctd--mini max--thuren 3" coils and LT Leaves--4.56 gears and lockers in pw axles--some lights--afe intake system--bd super b turbo--Banks w/m Injection--Dynatrac Balljoints--king 2.5"s--37" Hankook Dynapro MT--DOR Long arms--Custom emf track bar--Manual T-case swap--Full PW Under armor--PSC Hydro Assist and so much more

cb1987
50_Posts
50_Posts
Posts: 88
Joined: Sun Feb 12, 2017 8:46 pm
Model Year: 2014

Re: how to: '14+ 11.5

Post by cb1987 » Tue Jun 27, 2017 9:40 pm

DamageWagon wrote:Let's see if the new seal and bearing gives a few hundred thousand miles Image great job dude.
it may be a long time before we have that answer as it isnt my daily driver but so far its still bone dry after 100mi which is atleast 50mi farther than the factory one made it. could of been leaking as it rolled of the transport truck for all i know

RustyPW
2000_Posts
2000_Posts
Posts: 4071
Joined: Thu May 24, 2012 4:23 pm
Model Year: 2008
Location: Brownsville Pa.

Re: how to: '14+ 11.5" pinion seal

Post by RustyPW » Tue Jun 27, 2017 9:54 pm

MikeKey wrote:
Colibri wrote:This is how I picture mikekey and reloaderguy
This is how I picture turdgen owners :run:

Image
Looks like a self portrait.
PWOC #53
2008 POWER WAGON RC
Mods to the PW; Nerffed Mopar RockRails, Wheel Well Liners, Bushwacker Pocket Fender Flairs, Garvmin dezl 560LMT GPS, Power Wagon Winch Kit, Line X Ultra Bed Liner, PIAA Headlight Bulbs, PIAA 580 Driving Lights (135 watt), PIAA 520 Fog Lights (135 watt), PIAA 520 ATP Off-Road Lights (135 watt), Locker Bypass, Modifed Rockcrusher Diff Covers, Mopar Utility Bed Rails and Tool Box, Warn Winch Wireless Remote Control, "el-cheapo" Inclinometer, Airaid CAI, Winch TPS Bypass, 35" Toyo's, Mopar Spare Tire Lock, 'T' Steering Linkage, Modifed PSC Steering Brace, P3 Brake Controller, Modifed Fusion "mall crawler" rear bumper , PIAA 1500 Back-Up Lights, 1Ton HEMI Tranny Cooler, Leer 100XR Bed Cap, Factory Tow Mirrors, CenterLine Rims 17x9-5.25 BS, Mag-Hytec Tranny Pan, AutoMeter Gauges, PSC Extreme Hydro Assist Steering, Carli G2 Track Bar, Carli Ball-Joints, Dynatrac FreeSpin Hubs, Snorkel, RCV Axles, EBC Pads & Rotors, Aluminess Front Bumper, BIG Pul-Pal, 60" Extreme Hi-lift Jack, and more riggin' equipment, Carli Long Travel Air Bags, Bilstein 7100 Shocks - Carli Valving, Carli Control Arms, Thuren 3" SoftRide Springs, Thuren Rear Shackles, MagnaFlow Muffler, Crown Stainless Brake Lines, MORE STUFF COMIN'.

Moab '10, '12, '14.
Rausch Creek Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18,
Russ NRA Benefactor Member

Colibri
1000_Posts
1000_Posts
Posts: 1547
Joined: Mon Jun 08, 2015 5:44 pm
Model Year: 2009

Re: how to: '14+ 11.5" pinion seal

Post by Colibri » Tue Jun 27, 2017 10:13 pm

Life's a garden baby - dig it!
Central Texas and Houston area
2009 5.7 auto quadcab
Carli 3” coils deaver leafs 3” kings with 4 tube bypass rear and fr/rr hydro bumps
Howe steering pump and gear with hydraulic ram assist
Custom tube bumpers and white knuckle sliders
Creative fab trussed axle. rem polished and cryoed 5.13 gears with arb lockers fr/rr
Sharadon stage 2 545rfe with 3000 stall edge converter
Lots of other stuff lol

User avatar
BoldAdventure
Moderator
Moderator
Posts: 2035
Joined: Fri Mar 25, 2016 11:23 am
Model Year: 2015
Location: Nomadic
Contact:

Re: how to: '14+ 11.5" pinion seal

Post by BoldAdventure » Tue Jun 27, 2017 10:22 pm

Colibri wrote:Life's a garden baby - dig it!
:lol:

Image
2015 Power Wagon Laramie - "ROCKLANDER"
[Build Thread] [Instagram] [Youtube]

flattire
250_Posts
250_Posts
Posts: 315
Joined: Fri Jun 08, 2012 1:22 pm

Re: how to: '14+ 11.5" pinion seal

Post by flattire » Wed Jun 28, 2017 1:32 am

Not sure if this is the right term......bromance ..... is that a word?

Post Reply