New Locker List for 4th Gen's

Plug-N-Play Locker Bypass Kits

Moderator: myoung84

redneck1
Posts: 39
Joined: Mon Jun 08, 2015 5:33 pm
Model Year: 2013

Re: New Locker List for 4th Gen's

Post by redneck1 » Sun Aug 09, 2015 7:24 pm

Yea ashame because there's a lot of money here for someone to make

User avatar
Mike-H
50_Posts
50_Posts
Posts: 115
Joined: Sat May 30, 2015 8:38 pm
Model Year: 2013
Location: Central, Az

Re: New Locker List for 4th Gen's

Post by Mike-H » Sun Aug 09, 2015 8:42 pm

Me too! Please take my money.

Anybody else know how to go about this? Is it as simple as wiring dedicated relays to the dash switch?

User avatar
06PW
Posts: 21
Joined: Sun Nov 16, 2014 5:24 pm
Model Year: 2006
Location: S. Pittsburg, TN

Re: New Locker List for 4th Gen's

Post by 06PW » Mon Aug 10, 2015 7:27 am

there is enough info on this board to figure it out. I personally have pretty well decided i am going to give it a try. I have a 3G truck out of warranty, so the plug and play isn't a deal breaker for me. I am more than likely going to splice it all in since there aren't connectors available. Two relay boards, 3 5 pin relays, 2 diodes, and a crap ton of wire.
2006 PW stocker, 35" Tires, lots of dents and scratches
Had everything from Land Rovers to Duece and a halfs

User avatar
w2dodge
500_Posts
500_Posts
Posts: 854
Joined: Mon May 21, 2012 2:57 pm
Location: nj..ny

Re: New Locker List for 4th Gen's

Post by w2dodge » Mon Aug 10, 2015 7:38 pm

Good luck I have no patients with wires and such :rockon:

User avatar
06PW
Posts: 21
Joined: Sun Nov 16, 2014 5:24 pm
Model Year: 2006
Location: S. Pittsburg, TN

Re: New Locker List for 4th Gen's

Post by 06PW » Tue Aug 11, 2015 5:06 am

w2dodge wrote:Good luck I have no patients with wires and such :rockon:

Oh, i didn't say I it was going to work, or that I had great patients, but as of now especially since i have a 3G truck that is really my only option if I want to use the original knob.
2006 PW stocker, 35" Tires, lots of dents and scratches
Had everything from Land Rovers to Duece and a halfs

dodgefan528
Posts: 3
Joined: Mon May 18, 2015 3:53 pm
Model Year: 2014

Re: New Locker List for 4th Gen's

Post by dodgefan528 » Sat Sep 05, 2015 11:52 pm

Any update on the list I put my name on it but haven't seen anything recently

User avatar
Jack187
50_Posts
50_Posts
Posts: 107
Joined: Sun May 17, 2015 8:35 pm
Model Year: 2014
Location: WI

Re: New Locker List for 4th Gen's

Post by Jack187 » Mon Sep 07, 2015 9:43 pm

dodgefan528 wrote:Any update on the list I put my name on it but haven't seen anything recently
CajunPW has been AWOL for about 2 months. As far as I know, no one has heard from him in that time.
2015 Power Wagon Tradesman, 37x1350x17 Cooper Discoverer STT Pro tires, 17x8.5 AEV Katla wheels

User avatar
04Ram2500Hemi
2000_Posts
2000_Posts
Posts: 2049
Joined: Thu May 31, 2012 10:19 am
Model Year: 2012
Location: Missoula, MT

Re: New Locker List for 4th Gen's

Post by 04Ram2500Hemi » Thu Sep 10, 2015 7:37 pm

Jack187 wrote:
dodgefan528 wrote:Any update on the list I put my name on it but haven't seen anything recently
CajunPW has been AWOL for about 2 months. As far as I know, no one has heard from him in that time.
Cajun pretty much did the same thing with Mo's on Dodge Talk I think. As soon as Morgan walked from the by-pass I knew those without the kit were in trouble.
2012 Ram Power Wagon: http://forum.powerwagonregistry.org/vie ... f=13&t=107
Truxedo Deuce Bed Cover with Bed Lights, Black Line-X Rocker Panel, Custom Built Rock Rails Sprayed with Line-X, Front & Rear Bumper and Grill sprayed with Line-X, Husky Mud Flaps, Husky Floor Mats, Four VisionX Xmitter Low Pro Prime XP LED Light Bars Behind the Grill, LED Lights Mounted in the Rear Bumper, Heated Seats, Interior LED Lighting, NAV-TV, Camera Mounted in Front Grill, Custom Headache Rack, AEV Raised Air Intake, AEV Salta HD Wheels in Onyx, 285/75/17 Toyo A/T II Tires

User avatar
FirerescuePW
1000_Posts
1000_Posts
Posts: 1566
Joined: Sun May 20, 2012 10:51 am
Location: North Wales, PA

Re: New Locker List for 4th Gen's

Post by FirerescuePW » Thu Sep 10, 2015 9:19 pm

I swear I already posted this...

He did the same thing with the original locker bypass created by rgory. When he stopped making them, Shelby took over production. He sold a few, after a long delay with people posting just like you are reading here, and then disappeared. I don't believe anyone lost any money, but I know I sent $ to him and it took a looonng time to get the kit.

Maybe I did, and it was deleted without me noticing. Just be careful, everyone.
'05 Mineral Gray Power Wagon QC #1005

WINCH MOB PROUD!

SuperChips FlashPaq; DT ProFab Steering Brace; 08.5 Steering linkage (twice); Toyo Open Country M/T 35/12.50x17; Carli front diff guard; Rockcrusher rear diff cover; White Knuckle Offroad Rock Rails; Carli 3"coils, track bar, and High Clearance Control Arms; Carli King 2.5" Remote Resi Shocks; Reflex spray-in liner; Extang Trifecta tonneau cover; Pop Lock electric tailgate lock (OOS); Tekonsha Prodigy brake control; LEDS & Strobes & Siren; Winch TPS Bypass; Warn Wireless Remote; Dog hair, and a BIG Wish List!

RustyPW
2000_Posts
2000_Posts
Posts: 3572
Joined: Thu May 24, 2012 2:23 pm
Model Year: 2008
Location: Brownsville Pa.

Re: New Locker List for 4th Gen's

Post by RustyPW » Fri Sep 11, 2015 4:38 am

FirerescuePW wrote:I swear I already posted this...

He did the same thing with the original locker bypass created by rgory. When he stopped making them, Shelby took over production. He sold a few, after a long delay with people posting just like you are reading here, and then disappeared. I don't believe anyone lost any money, but I know I sent $ to him and it took a looonng time to get the kit.

Maybe I did, and it was deleted without me noticing. Just be careful, everyone.
Yep. Looks like history is repeating it's self. :( Shame. :(
PWOC #53
2008 POWER WAGON RC
Mods to the PW; Nerffed Mopar RockRails, Wheel Well Liners, Bushwacker Pocket Fender Flairs, Garvmin dezl 560LMT GPS, Power Wagon Winch Kit, Line X Ultra Bed Liner, PIAA Headlight Bulbs, PIAA 580 Driving Lights (135 watt), PIAA 520 Fog Lights (135 watt), PIAA 520 ATP Off-Road Lights (135 watt), Locker Bypass, Modifed Rockcrusher Diff Covers, Mopar Utility Bed Rails and Tool Box, Warn Winch Wireless Remote Control, "el-cheapo" Inclinometer, Airaid CAI, Winch TPS Bypass, 35" Toyo's, Mopar Spare Tire Lock, 'T' Steering Linkage, Modifed PSC Steering Brace, P3 Brake Controller, Modifed Fusion "mall crawler" rear bumper , PIAA 1500 Back-Up Lights, 1Ton HEMI Tranny Cooler, Leer 100XR Bed Cap, Factory Tow Mirrors, CenterLine Rims 17x9-5.25 BS, Mag-Hytec Tranny Pan, AutoMeter Gauges, PSC Extreme Hydro Assist Steering, Carli Track Bar, Carli Ball-Joints, Dynatrac FreeSpin Hubs, Snorkel, RCV Axles, EBC Pads & Rotors, Aluminess Front Bumper, BIG Pul-Pal, 60" Extreme Hi-lift Jack, and more riggin' equipment, Carli Long Travel Air Bags, Bilstein 7100 Shocks - Carli Valving, MORE STUFF COMIN'.

Moab '10, '12, '14.
Rausch Creek Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17,
Russ NRA Benefactor Member

User avatar
Mr.Smith
1000_Posts
1000_Posts
Posts: 1107
Joined: Wed Sep 04, 2013 4:36 pm
Model Year: 2009
Location: Craig, CO.

Re: New Locker List for 4th Gen's

Post by Mr.Smith » Sun Sep 13, 2015 7:04 pm

Talk to Morgan, get the specs, have another man begin building these...???

User avatar
Mike-H
50_Posts
50_Posts
Posts: 115
Joined: Sat May 30, 2015 8:38 pm
Model Year: 2013
Location: Central, Az

Re: New Locker List for 4th Gen's

Post by Mike-H » Sun Sep 13, 2015 8:16 pm

That would be awesome. Anybody have contact with them? I'd love to have just a splice in setup. Plug and play is great but I just want the functionality. I don't mind making it permanent.

mopartrev
Posts: 2
Joined: Thu Jan 22, 2015 6:34 pm
Model Year: 2012

Re: New Locker List for 4th Gen's

Post by mopartrev » Sat Oct 03, 2015 1:23 pm

I'd love to be added onto this list please. Would love to have a bypass kit for a 2012 pw. Thanks.

User avatar
PWDan
50_Posts
50_Posts
Posts: 99
Joined: Tue Feb 24, 2015 10:33 am
Model Year: 2010
Location: North Jersey

Re: New Locker List for 4th Gen's

Post by PWDan » Fri Oct 09, 2015 4:11 pm

This is a huge bummer! Like what was already said, there's money here to be made for the right person and believe me if I wasn't so terribly impatient with electrical components I'd certainly take on the task. That's exactly why I wanted the plug and play bypass. I was really hoping to have one before the snow starts so I could at least run with the rear locked in 4H. Guess we're all beat unless we hard wire it.

User avatar
CajunPW
50_Posts
50_Posts
Posts: 82
Joined: Fri Sep 14, 2012 5:05 pm

Re: New Locker List for 4th Gen's

Post by CajunPW » Wed Mar 16, 2016 7:35 pm

If you haven't received an email from me, please send me one. I have units ready to go for the 4th gens

User avatar
PWDan
50_Posts
50_Posts
Posts: 99
Joined: Tue Feb 24, 2015 10:33 am
Model Year: 2010
Location: North Jersey

Re: New Locker List for 4th Gen's

Post by PWDan » Wed Mar 16, 2016 8:15 pm

Guys, I got my CajunPW bypass kit today and it looks great. Very clean and straight forward so I'm hoping to get it installed by this weekend if all goes well. Very happy with the whole transaction. From the time he said they'd be ready till the time I got it in the mail was about 4-5 days so no delays at all. Thanks CajunPW!

User avatar
CajunPW
50_Posts
50_Posts
Posts: 82
Joined: Fri Sep 14, 2012 5:05 pm

Re: New Locker List for 4th Gen's

Post by CajunPW » Thu Mar 17, 2016 7:32 pm

Thank you sir! I appreciate the kind words

Post Reply