New and improved control box!

Plug-N-Play Locker Bypass Kits

Moderator: myoung84

User avatar
myoung84
Vendor
Vendor
Posts: 1481
Joined: Mon Jul 16, 2012 9:47 am

New and improved control box!

Post by myoung84 » Wed Sep 24, 2014 9:30 am

Got the final drawings back for the custom control box. This is the same box I used in the past, but I'm having them custom cut them for the connector. They are also thinning the side for clearance on the plug. This will allow me to use the gasket supplied with the connector rather than silicone. Before, the wall was too thick with the gasket in place and the plug wouldn't fully seat. Not that the previous boxes were bad, but these will look even better!
Capture3.JPG
Image
2014 Ram 1500 4x4 Outdoorsman
Retro Shop Custom FXR Projectors | Diablo inTune | Moe's 87mm TB | BT Oil Catch Can
Toyo A/T II Tires | Bilstein 5100 Front and Rear Shocks | Movotech UCA's
AirLift 100 Air Bags | Bestop PowerBoards | RollBak Bed Cover | BedRug

User avatar
myoung84
Vendor
Vendor
Posts: 1481
Joined: Mon Jul 16, 2012 9:47 am

Re: New and improved control box!

Post by myoung84 » Wed Sep 24, 2014 9:34 am

And here's a really cool 3D drawing. You can rotate and zoom within the PDF...

https://dl.dropboxusercontent.com/u/415 ... nector.PDF
Image
2014 Ram 1500 4x4 Outdoorsman
Retro Shop Custom FXR Projectors | Diablo inTune | Moe's 87mm TB | BT Oil Catch Can
Toyo A/T II Tires | Bilstein 5100 Front and Rear Shocks | Movotech UCA's
AirLift 100 Air Bags | Bestop PowerBoards | RollBak Bed Cover | BedRug

User avatar
SheepdogOutdoorsman
1000_Posts
1000_Posts
Posts: 1057
Joined: Fri Oct 18, 2013 8:03 am
Location: Mesa, AZ

Re: New and improved control box!

Post by SheepdogOutdoorsman » Wed Sep 24, 2014 10:46 am

I'm excited. Would there be a way for you to give us all a breakdown of your official list and expected times of completion (per batch)? I'm just curious to know (roughly) when I'll need to have the money available for you. The pay cut I took put me on a project budget and it would help to know when I'll need the $250 by. Thanks in advance!
The Sheepdog Outdoorsman

2013 Power Wagon: Trail Ready Pre-Runner Guard Front Bumper, PIAA 540 6" Driving Lamps, PIAA 530 4" Fog Lamps, Warn 10" Roller Fairleads, In-Cab Relocation Of Winch Controller Port, & More To Come ...

User avatar
myoung84
Vendor
Vendor
Posts: 1481
Joined: Mon Jul 16, 2012 9:47 am

Re: New and improved control box!

Post by myoung84 » Wed Sep 24, 2014 11:36 am

Here's the current 10-13 list. I'd say mid October?

Juday
shaneo74
SheepdogOutdoorsman
Image
2014 Ram 1500 4x4 Outdoorsman
Retro Shop Custom FXR Projectors | Diablo inTune | Moe's 87mm TB | BT Oil Catch Can
Toyo A/T II Tires | Bilstein 5100 Front and Rear Shocks | Movotech UCA's
AirLift 100 Air Bags | Bestop PowerBoards | RollBak Bed Cover | BedRug

User avatar
stubiePW
500_Posts
500_Posts
Posts: 581
Joined: Mon Nov 12, 2012 6:45 pm

Re: New and improved control box!

Post by stubiePW » Wed Sep 24, 2014 12:36 pm

Sweet. Hopefully i'm coming up soon

User avatar
myoung84
Vendor
Vendor
Posts: 1481
Joined: Mon Jul 16, 2012 9:47 am

Re: New and improved control box!

Post by myoung84 » Wed Sep 24, 2014 1:18 pm

Here's the "Official" 4th gen list. Notice there's one 2014 on the list as well. I've got JBM Power Wagon doing some testing on his new 2014 so assuming his works (99% sure it will) I'll have no problems with 2014s. Only difference will be a different plug at the rear axle, so it's not a whole new harness like the 3rd gens will be. My plan is to get at least a couple of these out each week. I can do two of them in one evening, and one evening a week is about all the free time I normally have. Keep in mind each one of these takes about 2 hours to build....

Juday 2010
shaneo74 2011
SheepdogOutdoorsman 2013
Pwagon12 2012
stubiePW 2012
RamMan 2012
TheDirtRoad 2014
Edge8970 2012
Image
2014 Ram 1500 4x4 Outdoorsman
Retro Shop Custom FXR Projectors | Diablo inTune | Moe's 87mm TB | BT Oil Catch Can
Toyo A/T II Tires | Bilstein 5100 Front and Rear Shocks | Movotech UCA's
AirLift 100 Air Bags | Bestop PowerBoards | RollBak Bed Cover | BedRug

User avatar
SheepdogOutdoorsman
1000_Posts
1000_Posts
Posts: 1057
Joined: Fri Oct 18, 2013 8:03 am
Location: Mesa, AZ

Re: New and improved control box!

Post by SheepdogOutdoorsman » Wed Sep 24, 2014 1:52 pm

myoung84 wrote:Here's the "Official" 4th gen list. Notice there's one 2014 on the list as well. I've got JBM Power Wagon doing some testing on his new 2014 so assuming his works (99% sure it will) I'll have no problems with 2014s. Only difference will be a different plug at the rear axle, so it's not a whole new harness like the 3rd gens will be. My plan is to get at least a couple of these out each week. I can do two of them in one evening, and one evening a week is about all the free time I normally have. Keep in mind each one of these takes about 2 hours to build....

Juday 2010
shaneo74 2011
SheepdogOutdoorsman 2013
Pwagon12 2012
stubiePW 2012
RamMan 2012
TheDirtRoad 2014
Edge8970 2012
Well, if it helps put the list in a slightly different order, I'll be ready to make payment on the 31st of October. I currently working on a rifle project for hunting season, so my project/fun budget is being split right now. Thanks for the update!
The Sheepdog Outdoorsman

2013 Power Wagon: Trail Ready Pre-Runner Guard Front Bumper, PIAA 540 6" Driving Lamps, PIAA 530 4" Fog Lamps, Warn 10" Roller Fairleads, In-Cab Relocation Of Winch Controller Port, & More To Come ...

TheDirtRoad
50_Posts
50_Posts
Posts: 164
Joined: Fri Apr 11, 2014 4:28 pm
Model Year: 2014
Location: Green River, Wyoming

Re: New and improved control box!

Post by TheDirtRoad » Fri Sep 26, 2014 10:05 am

Sweet I am on the list, I used my lockers a lot these past few days but it sure would have been nice to use them in 4-hi. I am patiently waiting

User avatar
myoung84
Vendor
Vendor
Posts: 1481
Joined: Mon Jul 16, 2012 9:47 am

Re: New and improved control box!

Post by myoung84 » Fri Sep 26, 2014 12:41 pm

Nothing better than lockers in 4-Hi, especially lockers in 4-Hi that lock up instantly... ;)
Image
2014 Ram 1500 4x4 Outdoorsman
Retro Shop Custom FXR Projectors | Diablo inTune | Moe's 87mm TB | BT Oil Catch Can
Toyo A/T II Tires | Bilstein 5100 Front and Rear Shocks | Movotech UCA's
AirLift 100 Air Bags | Bestop PowerBoards | RollBak Bed Cover | BedRug

AKPW
Posts: 3
Joined: Mon Sep 29, 2014 1:17 am
Model Year: 2014

Re: New and improved control box!

Post by AKPW » Tue Sep 30, 2014 12:20 am

let me no how to get a hold of you. I will buy a kit from you. I have a 2014 PW with 6.4

User avatar
JBM Power Wagon
500_Posts
500_Posts
Posts: 709
Joined: Sun May 27, 2012 8:46 am

Re: New and improved control box!

Post by JBM Power Wagon » Sun Oct 05, 2014 6:05 pm

myoung84 wrote:Here's the "Official" 4th gen list. Notice there's one 2014 on the list as well. I've got JBM Power Wagon doing some testing on his new 2014 so assuming his works (99% sure it will) I'll have no problems with 2014s. Only difference will be a different plug at the rear axle, so it's not a whole new harness like the 3rd gens will be. My plan is to get at least a couple of these out each week. I can do two of them in one evening, and one evening a week is about all the free time I normally have. Keep in mind each one of these takes about 2 hours to build....

Juday 2010
shaneo74 2011
SheepdogOutdoorsman 2013
Pwagon12 2012
stubiePW 2012
RamMan 2012
TheDirtRoad 2014
Edge8970 2012
So I installed the locker bypass kit on my 2014 today with the new rear axle connector Myoung sent me and............ IT WORKS!!!!!!

I am sooooooo stoked I was able to transplant my 100% favorite mod from my 2011 over to my 2014!!!!!

A huge thank you to Myoung for making a great product and also working so hard to make the kit work on the 2014's and the 3G's.

I had to change the mounting spot due to a coolant reservoir being in the standard location. I was able to mount it up right behind the air box.
ImageUploadedByTapatalk1412553941.700901.jpg
Loving my 3/4 ton version of my old Jeep TJ!!!!!

User avatar
jeep_boy02
500_Posts
500_Posts
Posts: 973
Joined: Sat Feb 16, 2013 12:21 pm

Re: New and improved control box!

Post by jeep_boy02 » Sun Oct 05, 2014 6:45 pm

SWEET!

User avatar
myoung84
Vendor
Vendor
Posts: 1481
Joined: Mon Jul 16, 2012 9:47 am

Re: New and improved control box!

Post by myoung84 » Mon Oct 06, 2014 7:00 pm

Excellent news!

Sent from my Samsung Galaxy Note 3.
Image
2014 Ram 1500 4x4 Outdoorsman
Retro Shop Custom FXR Projectors | Diablo inTune | Moe's 87mm TB | BT Oil Catch Can
Toyo A/T II Tires | Bilstein 5100 Front and Rear Shocks | Movotech UCA's
AirLift 100 Air Bags | Bestop PowerBoards | RollBak Bed Cover | BedRug

TheDirtRoad
50_Posts
50_Posts
Posts: 164
Joined: Fri Apr 11, 2014 4:28 pm
Model Year: 2014
Location: Green River, Wyoming

Re: New and improved control box!

Post by TheDirtRoad » Mon Oct 06, 2014 9:18 pm

myoung84 wrote:Excellent news!

Sent from my Samsung Galaxy Note 3.
Really excellent news !!!!

User avatar
JBM Power Wagon
500_Posts
500_Posts
Posts: 709
Joined: Sun May 27, 2012 8:46 am

Re: New and improved control box!

Post by JBM Power Wagon » Tue Oct 07, 2014 5:25 am

TheDirtRoad wrote:
myoung84 wrote:Excellent news!

Sent from my Samsung Galaxy Note 3.
Really excellent news !!!!
Oh yes it is!!! I head out hunting on Friday and am soooo happy I will be able to use the lockers in 4 hi.
Loving my 3/4 ton version of my old Jeep TJ!!!!!

User avatar
05PWrockcrawler
1000_Posts
1000_Posts
Posts: 1891
Joined: Sat Mar 30, 2013 8:56 pm

Re: New and improved control box!

Post by 05PWrockcrawler » Tue Oct 07, 2014 10:36 am

My Dad just bought an 05PW and will need one of these for his truck.


Sent from my iPhone using Tapatalk/hopefully somewhere Offroad!

JimmyW
Posts: 10
Joined: Fri Oct 10, 2014 5:18 pm
Model Year: 2011
Location: Helena, MT

Re: New and improved control box!

Post by JimmyW » Fri Oct 10, 2014 8:01 pm

May I get on the list for a unit for my 2011 PW? I'll take one as soon as it's available. Thanks.
JimmyW
Helena, MT

User avatar
2011TXPowerWagon
250_Posts
250_Posts
Posts: 496
Joined: Fri Aug 08, 2014 3:07 pm
Model Year: 2011
Location: Edinburg, Texas

Re: New and improved control box!

Post by 2011TXPowerWagon » Thu Oct 23, 2014 8:33 am

I would like to get in on the list as well.
"A government that robs Peter to pay Paul can always depend on the support of Paul."

-George Bernard Shaw

User avatar
myoung84
Vendor
Vendor
Posts: 1481
Joined: Mon Jul 16, 2012 9:47 am

Re: New and improved control box!

Post by myoung84 » Thu Oct 23, 2014 9:13 am

I'll add you guys to the list!
Image
2014 Ram 1500 4x4 Outdoorsman
Retro Shop Custom FXR Projectors | Diablo inTune | Moe's 87mm TB | BT Oil Catch Can
Toyo A/T II Tires | Bilstein 5100 Front and Rear Shocks | Movotech UCA's
AirLift 100 Air Bags | Bestop PowerBoards | RollBak Bed Cover | BedRug

User avatar
myoung84
Vendor
Vendor
Posts: 1481
Joined: Mon Jul 16, 2012 9:47 am

Re: New and improved control box!

Post by myoung84 » Thu Oct 23, 2014 9:12 pm

Relay boards came in from Hong Kong! All 100 of them!
[attachment=-1]uploadfromtaptalk1414120183668.jpg[/attachment]

And I really like the new precut boxes! The connector fits great and I don't have to dremel the hole out!

[attachment=-1]uploadfromtaptalk1414120265592.jpg[/attachment]

Sent from my Samsung Galaxy Note 3.
Attachments
uploadfromtaptalk1414120183668.jpg
uploadfromtaptalk1414120265592.jpg
Image
2014 Ram 1500 4x4 Outdoorsman
Retro Shop Custom FXR Projectors | Diablo inTune | Moe's 87mm TB | BT Oil Catch Can
Toyo A/T II Tires | Bilstein 5100 Front and Rear Shocks | Movotech UCA's
AirLift 100 Air Bags | Bestop PowerBoards | RollBak Bed Cover | BedRug

User avatar
Dark84
Posts: 49
Joined: Wed May 21, 2014 8:35 am
Model Year: 2014

Re: New and improved control box!

Post by Dark84 » Fri Oct 24, 2014 8:10 am

Hey myoung84 would you mind adding me to the list too?
Dark84=2014 PW SLT


Sent from my iPhone using Tapatalk

User avatar
myoung84
Vendor
Vendor
Posts: 1481
Joined: Mon Jul 16, 2012 9:47 am

Re: New and improved control box!

Post by myoung84 » Fri Oct 24, 2014 8:32 am

Already have you on there. ;)
Image
2014 Ram 1500 4x4 Outdoorsman
Retro Shop Custom FXR Projectors | Diablo inTune | Moe's 87mm TB | BT Oil Catch Can
Toyo A/T II Tires | Bilstein 5100 Front and Rear Shocks | Movotech UCA's
AirLift 100 Air Bags | Bestop PowerBoards | RollBak Bed Cover | BedRug

User avatar
Dark84
Posts: 49
Joined: Wed May 21, 2014 8:35 am
Model Year: 2014

Re: New and improved control box!

Post by Dark84 » Fri Oct 24, 2014 8:33 am

Oh sweet, thank you very much good sir!


Sent from my iPhone using Tapatalk

User avatar
PWDan
50_Posts
50_Posts
Posts: 99
Joined: Tue Feb 24, 2015 10:33 am
Model Year: 2010
Location: North Jersey

Re: New and improved control box!

Post by PWDan » Mon Mar 23, 2015 9:10 am

Can I get on the list? I really want one for my 2010 as my first mod.

Jnallison
50_Posts
50_Posts
Posts: 182
Joined: Fri Feb 27, 2015 1:37 pm
Model Year: 2014

Re: New and improved control box!

Post by Jnallison » Fri Apr 10, 2015 12:26 pm

Add me to that list also, please and Thank you. 2014 SLT, this is exciting, I hate waiting for my lockers to quit thinking.
2014 SLT, 35" BFG KM2 on Worx wheels 17x9, leveled 2.5", 1" Traxxda in the rear, toneaumax cover, AEM drop in filter, swing cases, purple cranuim diff covers, custom sliders,

Post Reply