New and improved control box!
Moderator: myoung84
New and improved control box!
Got the final drawings back for the custom control box. This is the same box I used in the past, but I'm having them custom cut them for the connector. They are also thinning the side for clearance on the plug. This will allow me to use the gasket supplied with the connector rather than silicone. Before, the wall was too thick with the gasket in place and the plug wouldn't fully seat. Not that the previous boxes were bad, but these will look even better!
2014 Ram 1500 4x4 Outdoorsman
Retro Shop Custom FXR Projectors | Diablo inTune | Moe's 87mm TB | BT Oil Catch Can
Toyo A/T II Tires | Bilstein 5100 Front and Rear Shocks | Movotech UCA's
AirLift 100 Air Bags | Bestop PowerBoards | RollBak Bed Cover | BedRug
Re: New and improved control box!
And here's a really cool 3D drawing. You can rotate and zoom within the PDF...
https://dl.dropboxusercontent.com/u/415 ... nector.PDF
https://dl.dropboxusercontent.com/u/415 ... nector.PDF
2014 Ram 1500 4x4 Outdoorsman
Retro Shop Custom FXR Projectors | Diablo inTune | Moe's 87mm TB | BT Oil Catch Can
Toyo A/T II Tires | Bilstein 5100 Front and Rear Shocks | Movotech UCA's
AirLift 100 Air Bags | Bestop PowerBoards | RollBak Bed Cover | BedRug
- SheepdogOutdoorsman
- 1000_Posts
- Posts: 1061
- Joined: Fri Oct 18, 2013 10:03 am
- Location: Mesa, AZ
Re: New and improved control box!
I'm excited. Would there be a way for you to give us all a breakdown of your official list and expected times of completion (per batch)? I'm just curious to know (roughly) when I'll need to have the money available for you. The pay cut I took put me on a project budget and it would help to know when I'll need the $250 by. Thanks in advance!
The Sheepdog Outdoorsman
2013 Power Wagon: Trail Ready Pre-Runner Guard Front Bumper, PIAA 540 6" Driving Lamps, PIAA 530 4" Fog Lamps, Warn 10" Roller Fairleads, In-Cab Relocation Of Winch Controller Port, & More To Come ...
2013 Power Wagon: Trail Ready Pre-Runner Guard Front Bumper, PIAA 540 6" Driving Lamps, PIAA 530 4" Fog Lamps, Warn 10" Roller Fairleads, In-Cab Relocation Of Winch Controller Port, & More To Come ...
Re: New and improved control box!
Here's the current 10-13 list. I'd say mid October?
Juday
shaneo74
SheepdogOutdoorsman
Juday
shaneo74
SheepdogOutdoorsman
2014 Ram 1500 4x4 Outdoorsman
Retro Shop Custom FXR Projectors | Diablo inTune | Moe's 87mm TB | BT Oil Catch Can
Toyo A/T II Tires | Bilstein 5100 Front and Rear Shocks | Movotech UCA's
AirLift 100 Air Bags | Bestop PowerBoards | RollBak Bed Cover | BedRug
Re: New and improved control box!
Sweet. Hopefully i'm coming up soon
Re: New and improved control box!
Here's the "Official" 4th gen list. Notice there's one 2014 on the list as well. I've got JBM Power Wagon doing some testing on his new 2014 so assuming his works (99% sure it will) I'll have no problems with 2014s. Only difference will be a different plug at the rear axle, so it's not a whole new harness like the 3rd gens will be. My plan is to get at least a couple of these out each week. I can do two of them in one evening, and one evening a week is about all the free time I normally have. Keep in mind each one of these takes about 2 hours to build....
Juday 2010
shaneo74 2011
SheepdogOutdoorsman 2013
Pwagon12 2012
stubiePW 2012
RamMan 2012
TheDirtRoad 2014
Edge8970 2012
Juday 2010
shaneo74 2011
SheepdogOutdoorsman 2013
Pwagon12 2012
stubiePW 2012
RamMan 2012
TheDirtRoad 2014
Edge8970 2012
2014 Ram 1500 4x4 Outdoorsman
Retro Shop Custom FXR Projectors | Diablo inTune | Moe's 87mm TB | BT Oil Catch Can
Toyo A/T II Tires | Bilstein 5100 Front and Rear Shocks | Movotech UCA's
AirLift 100 Air Bags | Bestop PowerBoards | RollBak Bed Cover | BedRug
- SheepdogOutdoorsman
- 1000_Posts
- Posts: 1061
- Joined: Fri Oct 18, 2013 10:03 am
- Location: Mesa, AZ
Re: New and improved control box!
Well, if it helps put the list in a slightly different order, I'll be ready to make payment on the 31st of October. I currently working on a rifle project for hunting season, so my project/fun budget is being split right now. Thanks for the update!myoung84 wrote:Here's the "Official" 4th gen list. Notice there's one 2014 on the list as well. I've got JBM Power Wagon doing some testing on his new 2014 so assuming his works (99% sure it will) I'll have no problems with 2014s. Only difference will be a different plug at the rear axle, so it's not a whole new harness like the 3rd gens will be. My plan is to get at least a couple of these out each week. I can do two of them in one evening, and one evening a week is about all the free time I normally have. Keep in mind each one of these takes about 2 hours to build....
Juday 2010
shaneo74 2011
SheepdogOutdoorsman 2013
Pwagon12 2012
stubiePW 2012
RamMan 2012
TheDirtRoad 2014
Edge8970 2012
The Sheepdog Outdoorsman
2013 Power Wagon: Trail Ready Pre-Runner Guard Front Bumper, PIAA 540 6" Driving Lamps, PIAA 530 4" Fog Lamps, Warn 10" Roller Fairleads, In-Cab Relocation Of Winch Controller Port, & More To Come ...
2013 Power Wagon: Trail Ready Pre-Runner Guard Front Bumper, PIAA 540 6" Driving Lamps, PIAA 530 4" Fog Lamps, Warn 10" Roller Fairleads, In-Cab Relocation Of Winch Controller Port, & More To Come ...
-
- 50_Posts
- Posts: 174
- Joined: Fri Apr 11, 2014 6:28 pm
- Model Year: 2014
- Location: Green River, Wyoming
Re: New and improved control box!
Sweet I am on the list, I used my lockers a lot these past few days but it sure would have been nice to use them in 4-hi. I am patiently waiting
Re: New and improved control box!
Nothing better than lockers in 4-Hi, especially lockers in 4-Hi that lock up instantly...
2014 Ram 1500 4x4 Outdoorsman
Retro Shop Custom FXR Projectors | Diablo inTune | Moe's 87mm TB | BT Oil Catch Can
Toyo A/T II Tires | Bilstein 5100 Front and Rear Shocks | Movotech UCA's
AirLift 100 Air Bags | Bestop PowerBoards | RollBak Bed Cover | BedRug
Re: New and improved control box!
let me no how to get a hold of you. I will buy a kit from you. I have a 2014 PW with 6.4
- JBM Power Wagon
- 500_Posts
- Posts: 709
- Joined: Sun May 27, 2012 10:46 am
Re: New and improved control box!
So I installed the locker bypass kit on my 2014 today with the new rear axle connector Myoung sent me and............ IT WORKS!!!!!!myoung84 wrote:Here's the "Official" 4th gen list. Notice there's one 2014 on the list as well. I've got JBM Power Wagon doing some testing on his new 2014 so assuming his works (99% sure it will) I'll have no problems with 2014s. Only difference will be a different plug at the rear axle, so it's not a whole new harness like the 3rd gens will be. My plan is to get at least a couple of these out each week. I can do two of them in one evening, and one evening a week is about all the free time I normally have. Keep in mind each one of these takes about 2 hours to build....
Juday 2010
shaneo74 2011
SheepdogOutdoorsman 2013
Pwagon12 2012
stubiePW 2012
RamMan 2012
TheDirtRoad 2014
Edge8970 2012
I am sooooooo stoked I was able to transplant my 100% favorite mod from my 2011 over to my 2014!!!!!
A huge thank you to Myoung for making a great product and also working so hard to make the kit work on the 2014's and the 3G's.
I had to change the mounting spot due to a coolant reservoir being in the standard location. I was able to mount it up right behind the air box.
Loving my 3/4 ton version of my old Jeep TJ!!!!!
- jeep_boy02
- 1000_Posts
- Posts: 1098
- Joined: Sat Feb 16, 2013 1:21 pm
Re: New and improved control box!
SWEET!
2010 black pearl(PXR) on 35s, bypass harness, gooseneck, CAI, 3" magnaflow catback, bulldog hemi GT.... more to come soon
Re: New and improved control box!
Excellent news!
Sent from my Samsung Galaxy Note 3.
Sent from my Samsung Galaxy Note 3.
2014 Ram 1500 4x4 Outdoorsman
Retro Shop Custom FXR Projectors | Diablo inTune | Moe's 87mm TB | BT Oil Catch Can
Toyo A/T II Tires | Bilstein 5100 Front and Rear Shocks | Movotech UCA's
AirLift 100 Air Bags | Bestop PowerBoards | RollBak Bed Cover | BedRug
-
- 50_Posts
- Posts: 174
- Joined: Fri Apr 11, 2014 6:28 pm
- Model Year: 2014
- Location: Green River, Wyoming
Re: New and improved control box!
Really excellent news !!!!myoung84 wrote:Excellent news!
Sent from my Samsung Galaxy Note 3.
- JBM Power Wagon
- 500_Posts
- Posts: 709
- Joined: Sun May 27, 2012 10:46 am
Re: New and improved control box!
Oh yes it is!!! I head out hunting on Friday and am soooo happy I will be able to use the lockers in 4 hi.TheDirtRoad wrote:Really excellent news !!!!myoung84 wrote:Excellent news!
Sent from my Samsung Galaxy Note 3.
Loving my 3/4 ton version of my old Jeep TJ!!!!!
- 05PWrockcrawler
- 1000_Posts
- Posts: 1898
- Joined: Sat Mar 30, 2013 10:56 pm
Re: New and improved control box!
My Dad just bought an 05PW and will need one of these for his truck.
Sent from my iPhone using Tapatalk/hopefully somewhere Offroad!
Sent from my iPhone using Tapatalk/hopefully somewhere Offroad!
Re: New and improved control box!
May I get on the list for a unit for my 2011 PW? I'll take one as soon as it's available. Thanks.
JimmyW
Helena, MT
Helena, MT
- 2011TXPowerWagon
- 500_Posts
- Posts: 509
- Joined: Fri Aug 08, 2014 5:07 pm
- Model Year: 2011
- Location: Edinburg, Texas
Re: New and improved control box!
I would like to get in on the list as well.
"A government that robs Peter to pay Paul can always depend on the support of Paul."
-George Bernard Shaw
-George Bernard Shaw
Re: New and improved control box!
I'll add you guys to the list!
2014 Ram 1500 4x4 Outdoorsman
Retro Shop Custom FXR Projectors | Diablo inTune | Moe's 87mm TB | BT Oil Catch Can
Toyo A/T II Tires | Bilstein 5100 Front and Rear Shocks | Movotech UCA's
AirLift 100 Air Bags | Bestop PowerBoards | RollBak Bed Cover | BedRug
Re: New and improved control box!
Relay boards came in from Hong Kong! All 100 of them!
[attachment=-1]uploadfromtaptalk1414120183668.jpg[/attachment]
And I really like the new precut boxes! The connector fits great and I don't have to dremel the hole out!
[attachment=-1]uploadfromtaptalk1414120265592.jpg[/attachment]
Sent from my Samsung Galaxy Note 3.
[attachment=-1]uploadfromtaptalk1414120183668.jpg[/attachment]
And I really like the new precut boxes! The connector fits great and I don't have to dremel the hole out!
[attachment=-1]uploadfromtaptalk1414120265592.jpg[/attachment]
Sent from my Samsung Galaxy Note 3.
2014 Ram 1500 4x4 Outdoorsman
Retro Shop Custom FXR Projectors | Diablo inTune | Moe's 87mm TB | BT Oil Catch Can
Toyo A/T II Tires | Bilstein 5100 Front and Rear Shocks | Movotech UCA's
AirLift 100 Air Bags | Bestop PowerBoards | RollBak Bed Cover | BedRug
Re: New and improved control box!
Hey myoung84 would you mind adding me to the list too?
Dark84=2014 PW SLT
Sent from my iPhone using Tapatalk
Dark84=2014 PW SLT
Sent from my iPhone using Tapatalk
Re: New and improved control box!
Already have you on there.
2014 Ram 1500 4x4 Outdoorsman
Retro Shop Custom FXR Projectors | Diablo inTune | Moe's 87mm TB | BT Oil Catch Can
Toyo A/T II Tires | Bilstein 5100 Front and Rear Shocks | Movotech UCA's
AirLift 100 Air Bags | Bestop PowerBoards | RollBak Bed Cover | BedRug
Re: New and improved control box!
Oh sweet, thank you very much good sir!
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Re: New and improved control box!
Can I get on the list? I really want one for my 2010 as my first mod.
Re: New and improved control box!
Add me to that list also, please and Thank you. 2014 SLT, this is exciting, I hate waiting for my lockers to quit thinking.
2014 SLT, 35" BFG KM2 on Worx wheels 17x9, leveled 2.5", 1" Traxxda in the rear, toneaumax cover, AEM drop in filter, swing cases, purple cranuim diff covers, custom sliders,