NH Overland battery mount
NH Overland battery mount
Question for those who have installed this. What do you do about the bolt heads being above the bottom of the battery tray? I'm guessing your not setting the battery directly on them.
- Retired BLM Rig
- 1000_Posts
- Posts: 1123
- Joined: Sun Jan 31, 2016 6:51 pm
- Model Year: 2008
- Location: State of Jefferson
Re: NH Overland battery mount
Sounds like a poor design. Is there anyway to dimple the metal to recess bolts? Could you use elevator bolts instead?
2008 Quad Cab - Stock RTI = 655, curb weight = 6081 lbs. Abel Components Plug & Play Locker Bypass®, Abel Components Full SmartBar Bypass®, Abel Components Nanny Kill Switch®, 2000 Watt ProMariner TruePower Plus Pure Sine Wave Inverter, Trailer Hitch Storage, MOLLE Door Panels, Wilton Hitch Vice, Locking Under Seat Storage Drawer, Smittybilt 2781 Air Compressor, 14K PullPal, Hi-Lift First Responder Jack, 25' Jumper Cable System, Slip Yoke Eliminator in a Can, Evolution vs. God, Share the Umbrella, Make sure you're right with God before you meet him!
- SimonandSimonBeast
- 250_Posts
- Posts: 416
- Joined: Wed Nov 20, 2019 10:53 pm
- Model Year: 2013
- Location: Upper Salford, PA
Re: NH Overland battery mount
I would suggest a battery tray pad, and cut out holes where the bolt head are.