I misjudged a step on metal masher and dented the bumper, and it shifted the right side of the bumper back and up a bit.
I thought it had just shifted and I planned to loosen the mount and shift it back into place. But with the grille off and all the bolts loosened it wouldn't move and looking down the right side looked a bit different than the left.
So looking more carefully from underneath, there is a major bend in the right bumper mount. So looks like time for a new mount. This looks like something of a pain to replace in my driveway (there are about 3 layers of brackets and shrouds to remove first) , but it looks doable. Anyone ever do this? Anyone know heavy the bumper is?
So I bent the bumper mount
-
- 250_Posts
- Posts: 307
- Joined: Thu Oct 19, 2017 4:32 pm
- Model Year: 2018
- Location: Albuquerque
So I bent the bumper mount
2018 White Rambox, Diamondback HD bed cover, White Knuckle sliders, Carli and Purple Cranium diff guards, masterpull 11mm superline, 37 Toyo MT.
Re: So I bent the bumper mount
I mean I've removed it all when I went to Thuren bumper in a driveway. We used a ratchet strap at one point to wiggle the winch and cradle but the bumper is pretty light itself.
Sent from my SM-N976V using Tapatalk
Sent from my SM-N976V using Tapatalk
2016 Granite Crystal Metallic Power Wagon Laramie, graphics delete, debadged, Thuren front and rear coils, Thuren rear swaybar links, Thuren front and rear trackbars, Traxada rear 1 inch spacers, King 3.0 (Stage 4) front and 2.5 (Stage 3) rear shocks, Boogie front bump stops, Cooper STT Pro 37x13.50R17 on XD Machette 17x9 +18 wheels, Centramatics, 5.13 gears, DOR steering brace, Thuren truss, Thuren King Steering Damper, Synergy Steering Kit, Thuren PW front bumper, Thuren rear bumper, White Knuckle rock sliders, Dethloff skid plate, Dethloff rear sway bar spacers, Purple Cranium Half Spider front and rear diff guards, Airlift 5000 Ultimate airbags with Daystar cradles, Bakflip Revolver X2 tonneau, Factor55 Ultrahook with 100ft 7/16 A.R.E. Spidersilk synthetic winch line, Zroadz Grill with slim 20 inch light bar, DDM Tuning LEDs/HIDs, Rigid Side Shooter ditch lights, KC rock lights, Rigid fog lights, Baja Designs rear lights, Magnaflow 19200 modified with upgraded resonator and after axle dump, tinted front windows 35%.
Re: So I bent the bumper mount
Doable, but definitely a pain in the ass. I’ve used ratchet straps and a floor jack to pull bumper brackets before
Central Texas and Houston area
2009 5.7 auto quadcab
Carli 3” coils deaver leafs 3” kings with 4 tube bypass rear and fr/rr hydro bumps
Howe steering pump and gear with hydraulic ram assist
Custom tube bumpers and white knuckle sliders
Creative fab trussed axle. rem polished and cryoed 5.13 gears with arb lockers fr/rr
Sharadon stage 2 545rfe with 3000 stall edge converter
Lots of other stuff lol
2009 5.7 auto quadcab
Carli 3” coils deaver leafs 3” kings with 4 tube bypass rear and fr/rr hydro bumps
Howe steering pump and gear with hydraulic ram assist
Custom tube bumpers and white knuckle sliders
Creative fab trussed axle. rem polished and cryoed 5.13 gears with arb lockers fr/rr
Sharadon stage 2 545rfe with 3000 stall edge converter
Lots of other stuff lol