New Rear Bumper?

If it's about Power Wagons, all generations, this is where it'll go. This is the original PWR Forum Power Wagon Technical Discussion Section. And this includes everything that doesn’t fit in any one of the other categories related to the truck goes here!
TankerZak
500_Posts
500_Posts
Posts: 534
Joined: Sun Nov 13, 2016 1:43 pm
Model Year: 2016

Re: New Rear Bumper?

Post by TankerZak » Fri Oct 12, 2018 9:37 am

I know Maple Wagon has built something similar for a 3rd gen and is making a production 4th gen. ADD stealthfighter rear is the slimmest and tightest I've found that's production. Other than that the market mostly sucks with winch bumpers and bro bumpers...

Sent from my SM-G955U using Tapatalk

2016 Granite Crystal Metallic Power Wagon Laramie, no graphics, debadged, Thuren front and rear coils, Traxada rear 1 inch spacer, Thuren rear swaybar links, Thuren rear trackbar, King 3.0 (Stage 4) front shocks, King 2.5 (Stage 3) rear shocks, Boogie front bump stops, Toyo RT 37x12.5R17 on Raceline Avenger 17x9 +20 wheels, DOR steering brace, Thuren King Steering Damper, White Knuckle rock sliders, Dethloff skid plate, Purple Cranium Half Spider front and rear diff guards, Airlift Ultimate airbags with Daystar cradles, Bakflip Revolver X2 tonneau, AMP BedStep, Factor55 Ultrahook with 100ft 7/16 synthetic winch line, Zroadz Grill with slim 20 inch light bar, DDM Tuning LEDs/HIDs, Magnaflow 19200 modified with upgraded resonator and after axle dump, tinted front windows 35%.

User avatar
BoldAdventure
Moderator
Moderator
Posts: 2082
Joined: Fri Mar 25, 2016 11:23 am
Model Year: 2015
Location: Nomadic
Contact:

Re: New Rear Bumper?

Post by BoldAdventure » Fri Oct 12, 2018 11:06 am

Easttnrhino wrote:
Fri Oct 12, 2018 8:59 am
I am also wanting but not finding a rear bumper that suits me. I wish diesel power products would tell me where they got this one
So I know which truck build that is. I asked, repeatedly until I drove them crazy. It's an in-house build, built by the owner of that build, who works for them. It's 100% custom.

Maple Wagon might be building something like this soon, it's very much in the vain of what I want to accomplish. DamageWagon originally didn't want to do so many pieces and we never got to a bumper other than one failed attempt. And his business with racks & skids took off.
2015 Power Wagon Laramie - "ROCKLANDER"
[Build Thread] [Instagram] [Youtube]

Ducky's Dad
1000_Posts
1000_Posts
Posts: 1465
Joined: Thu May 24, 2012 10:55 pm

Re: New Rear Bumper?

Post by Ducky's Dad » Fri Oct 12, 2018 11:31 am

I have not yet decided (settled) on a rear bumper for the PW because I have to get a new front bumper for the Tundra due to an accident. Hoping I can find a source that will cut a deal on a twofer. Also waiting for the insurance to decide how much they will kick in for the Tundra repairs, because the other guy is claiming it was not his fault. And Tundra front bumpers are even goofier than rears for the PW.

RPS1030
50_Posts
50_Posts
Posts: 108
Joined: Fri Dec 25, 2015 10:46 pm
Model Year: 2014
Location: Phoenix

Re: New Rear Bumper?

Post by RPS1030 » Fri Oct 12, 2018 1:05 pm

Easttnrhino wrote:
Fri Oct 12, 2018 8:59 am
I am also wanting but not finding a rear bumper that suits me. I wish diesel power products would tell me where they got this one
Most of their project truck bumpers have been one-offs built in house.
2016 Power Wagon Tradesman-White-37" Toyo RTs/Inyati Bedliner/Baja Designs Squadron Sports/CVT RTT/Metalline Fab Bed Rack
FToy #43

DiazOsos
Posts: 41
Joined: Sat Sep 29, 2018 6:13 pm
Model Year: 2018
Location: Burnet Texas

Re: New Rear Bumper?

Post by DiazOsos » Fri Oct 12, 2018 4:22 pm

TankerZak wrote:
Thu Oct 11, 2018 11:13 pm
Right now I'm stuck on 775Fab or Kinzer front bumper and the ADD Stealth Fighter rear bumper. Best options I've found so far. If I was 100% happy i'd have already pulled the trigger.

Sent from my SM-G955U using Tapatalk
100% with you on the Kinzer front bumper. They are very nice. It’s on my list too. I wish they offered a model for stock fog lights and a matching back bumper too.

User avatar
Reloaderguy
1000_Posts
1000_Posts
Posts: 1967
Joined: Tue Feb 09, 2016 8:06 am
Model Year: 2016
Location: Central Oregon

Re: New Rear Bumper?

Post by Reloaderguy » Fri Oct 12, 2018 5:33 pm

TankerZak wrote:
Thu Oct 11, 2018 11:13 pm
Right now I'm stuck on 775Fab or Kinzer front bumper and the ADD Stealth Fighter rear bumper. Best options I've found so far. If I was 100% happy i'd have already pulled the trigger.

Sent from my SM-G955U using Tapatalk
There is another front bumper option coming soon.
Best Year Power Wagon

Easttnrhino
50_Posts
50_Posts
Posts: 217
Joined: Sun Mar 06, 2016 7:11 pm
Model Year: 2014
Location: athens tn

Re: New Rear Bumper?

Post by Easttnrhino » Fri Oct 12, 2018 8:06 pm

The factory front bumper is not good but I keep dragging the rear bumper, which is why I like the one diesel power products built. Thought I had a guy to build it for me and I was going to take tailgate off and do a swing out spare tire mount but mount the tire on the bed side to help with length and departure angle, also let the tire set on the bed floor to help with the weight of a 37. Just still a idea though.
2017 wagon in beautiful east tn

Easttnrhino
50_Posts
50_Posts
Posts: 217
Joined: Sun Mar 06, 2016 7:11 pm
Model Year: 2014
Location: athens tn

Re: New Rear Bumper?

Post by Easttnrhino » Fri Oct 12, 2018 8:06 pm

The factory front bumper is not good but I keep dragging the rear bumper, which is why I like the one diesel power products built. Thought I had a guy to build it for me and I was going to take tailgate off and do a swing out spare tire mount but mount the tire on the bed side to help with length and departure angle, also let the tire set on the bed floor to help with the weight of a 37. Just still a idea though.
2017 wagon in beautiful east tn

TankerZak
500_Posts
500_Posts
Posts: 534
Joined: Sun Nov 13, 2016 1:43 pm
Model Year: 2016

Re: New Rear Bumper?

Post by TankerZak » Fri Oct 12, 2018 9:39 pm

Reloaderguy wrote:
TankerZak wrote:
Thu Oct 11, 2018 11:13 pm
Right now I'm stuck on 775Fab or Kinzer front bumper and the ADD Stealth Fighter rear bumper. Best options I've found so far. If I was 100% happy i'd have already pulled the trigger.

Sent from my SM-G955U using Tapatalk
There is another front bumper option coming soon.
I keep hearing that... i know of three in some form of pre-thought through pre-production but no dice so far.

Sent from my SM-G955U using Tapatalk

2016 Granite Crystal Metallic Power Wagon Laramie, no graphics, debadged, Thuren front and rear coils, Traxada rear 1 inch spacer, Thuren rear swaybar links, Thuren rear trackbar, King 3.0 (Stage 4) front shocks, King 2.5 (Stage 3) rear shocks, Boogie front bump stops, Toyo RT 37x12.5R17 on Raceline Avenger 17x9 +20 wheels, DOR steering brace, Thuren King Steering Damper, White Knuckle rock sliders, Dethloff skid plate, Purple Cranium Half Spider front and rear diff guards, Airlift Ultimate airbags with Daystar cradles, Bakflip Revolver X2 tonneau, AMP BedStep, Factor55 Ultrahook with 100ft 7/16 synthetic winch line, Zroadz Grill with slim 20 inch light bar, DDM Tuning LEDs/HIDs, Magnaflow 19200 modified with upgraded resonator and after axle dump, tinted front windows 35%.

User avatar
Reloaderguy
1000_Posts
1000_Posts
Posts: 1967
Joined: Tue Feb 09, 2016 8:06 am
Model Year: 2016
Location: Central Oregon

Re: New Rear Bumper?

Post by Reloaderguy » Fri Oct 12, 2018 10:47 pm

TankerZak wrote:
Fri Oct 12, 2018 9:39 pm
Reloaderguy wrote:
TankerZak wrote:
Thu Oct 11, 2018 11:13 pm
Right now I'm stuck on 775Fab or Kinzer front bumper and the ADD Stealth Fighter rear bumper. Best options I've found so far. If I was 100% happy i'd have already pulled the trigger.

Sent from my SM-G955U using Tapatalk
There is another front bumper option coming soon.
I keep hearing that... i know of three in some form of pre-thought through pre-production but no dice so far.

Sent from my SM-G955U using Tapatalk
I know what you mean but the one I'm thinking of is in powder coat and you'll see pictures of it in the near future. I think full production starts as soon as first unit is installed. Further options for 40's a month or two behind that.
Best Year Power Wagon

TankerZak
500_Posts
500_Posts
Posts: 534
Joined: Sun Nov 13, 2016 1:43 pm
Model Year: 2016

Re: New Rear Bumper?

Post by TankerZak » Sun Oct 14, 2018 12:16 pm

Reloaderguy wrote:
Fri Oct 12, 2018 10:47 pm
TankerZak wrote:
Fri Oct 12, 2018 9:39 pm
Reloaderguy wrote:
There is another front bumper option coming soon.
I keep hearing that... i know of three in some form of pre-thought through pre-production but no dice so far.

Sent from my SM-G955U using Tapatalk
I know what you mean but the one I'm thinking of is in powder coat and you'll see pictures of it in the near future. I think full production starts as soon as first unit is installed. Further options for 40's a month or two behind that.
Well, I can't wait for another option! Nothing right now fits all my requirements. Kinzer could with some work... only thing i'd loose is front parking sensors which I could live without.
2016 Granite Crystal Metallic Power Wagon Laramie, no graphics, debadged, Thuren front and rear coils, Traxada rear 1 inch spacer, Thuren rear swaybar links, Thuren rear trackbar, King 3.0 (Stage 4) front shocks, King 2.5 (Stage 3) rear shocks, Boogie front bump stops, Toyo RT 37x12.5R17 on Raceline Avenger 17x9 +20 wheels, DOR steering brace, Thuren King Steering Damper, White Knuckle rock sliders, Dethloff skid plate, Purple Cranium Half Spider front and rear diff guards, Airlift Ultimate airbags with Daystar cradles, Bakflip Revolver X2 tonneau, AMP BedStep, Factor55 Ultrahook with 100ft 7/16 synthetic winch line, Zroadz Grill with slim 20 inch light bar, DDM Tuning LEDs/HIDs, Magnaflow 19200 modified with upgraded resonator and after axle dump, tinted front windows 35%.

User avatar
TommyG
250_Posts
250_Posts
Posts: 306
Joined: Sun Oct 05, 2014 2:41 pm
Model Year: 2012

Re: New Rear Bumper?

Post by TommyG » Sun Oct 14, 2018 2:17 pm

If it the option I am thinking of I am really looking forward to seeing it. :popcorn:
2012 Power Wagon
White Knuckle Sliders, myoung locker bypass, Thuren Track Bar, Thuren Control Arms, Toyo Open Country RT 37x12.50

User avatar
Reloaderguy
1000_Posts
1000_Posts
Posts: 1967
Joined: Tue Feb 09, 2016 8:06 am
Model Year: 2016
Location: Central Oregon

Re: New Rear Bumper?

Post by Reloaderguy » Sun Oct 14, 2018 11:46 pm

TankerZak wrote:
Sun Oct 14, 2018 12:16 pm
Reloaderguy wrote:
Fri Oct 12, 2018 10:47 pm
TankerZak wrote:
Fri Oct 12, 2018 9:39 pm
I keep hearing that... i know of three in some form of pre-thought through pre-production but no dice so far.

Sent from my SM-G955U using Tapatalk
I know what you mean but the one I'm thinking of is in powder coat and you'll see pictures of it in the near future. I think full production starts as soon as first unit is installed. Further options for 40's a month or two behind that.
Well, I can't wait for another option! Nothing right now fits all my requirements. Kinzer could with some work... only thing i'd loose is front parking sensors which I could live without.
I have a front sensor delete module sitting on my workbench, it's why I installed the front camera. The sensors will be gone.

I don't know what your requirements are, this one will have a second fairlead which is a turn off to some people. The Kinzer bumper needs serious work, if you can even get one.
Best Year Power Wagon

TankerZak
500_Posts
500_Posts
Posts: 534
Joined: Sun Nov 13, 2016 1:43 pm
Model Year: 2016

Re: New Rear Bumper?

Post by TankerZak » Mon Oct 15, 2018 12:04 am

I don't mind double fairlead if it's for a reason and not because it's a winch bumper for a standard 2500 and we are just running the winchline through the gap instead... giving the giant fat lip appearance and killing approach angle...

Sent from my SM-G955U using Tapatalk

2016 Granite Crystal Metallic Power Wagon Laramie, no graphics, debadged, Thuren front and rear coils, Traxada rear 1 inch spacer, Thuren rear swaybar links, Thuren rear trackbar, King 3.0 (Stage 4) front shocks, King 2.5 (Stage 3) rear shocks, Boogie front bump stops, Toyo RT 37x12.5R17 on Raceline Avenger 17x9 +20 wheels, DOR steering brace, Thuren King Steering Damper, White Knuckle rock sliders, Dethloff skid plate, Purple Cranium Half Spider front and rear diff guards, Airlift Ultimate airbags with Daystar cradles, Bakflip Revolver X2 tonneau, AMP BedStep, Factor55 Ultrahook with 100ft 7/16 synthetic winch line, Zroadz Grill with slim 20 inch light bar, DDM Tuning LEDs/HIDs, Magnaflow 19200 modified with upgraded resonator and after axle dump, tinted front windows 35%.

RustyPW
2000_Posts
2000_Posts
Posts: 4152
Joined: Thu May 24, 2012 4:23 pm
Model Year: 2008
Location: Brownsville Pa.

Re: New Rear Bumper?

Post by RustyPW » Mon Oct 15, 2018 4:45 am

The double fairlead sucks. If there is any extra clearance around the mounting holes between the bumper and frame. Everytime you use the winch. The bumper will move up or down. If you have lights mounted on the bumper. They will be off of their aim. Either pointing up or down from where you had them pointed at. My Aluminess bumper has a little extra clearance around the bolt holes and it drives me crazy. :roll:
PWOC #53
2008 POWER WAGON RC
Mods to the PW; Nerffed Mopar RockRails, Wheel Well Liners, Bushwacker Pocket Fender Flairs, Garvmin dezl 560LMT GPS, Power Wagon Winch Kit, Line X Ultra Bed Liner, PIAA Headlight Bulbs, PIAA 580 Driving Lights (135 watt), PIAA 520 Fog Lights (135 watt), PIAA 520 ATP Off-Road Lights (135 watt), Locker Bypass, Modifed Rockcrusher Diff Covers, Mopar Utility Bed Rails and Tool Box, Warn Winch Wireless Remote Control, "el-cheapo" Inclinometer, Airaid CAI, Winch TPS Bypass, 35" Toyo's, Mopar Spare Tire Lock, 'T' Steering Linkage, Modifed PSC Steering Brace, P3 Brake Controller, Modifed Fusion "mall crawler" rear bumper , PIAA 1500 Back-Up Lights, 1Ton HEMI Tranny Cooler, Leer 100XR Bed Cap, Factory Tow Mirrors, CenterLine Rims 17x9-5.25 BS, Mag-Hytec Tranny Pan, AutoMeter Gauges, PSC Extreme Hydro Assist Steering, Carli G2 Track Bar, Carli Ball-Joints, Dynatrac FreeSpin Hubs, Snorkel, RCV Axles, EBC Pads & Rotors, Aluminess Front Bumper, BIG Pul-Pal, 60" Extreme Hi-lift Jack, and more riggin' equipment, Carli Long Travel Air Bags, Bilstein 7100 Shocks - Carli Valving, Carli Control Arms, Thuren 3" SoftRide Springs, Thuren Rear Shackles, MagnaFlow Muffler, Crown Stainless Brake Lines, MORE STUFF COMIN'.

Moab '10, '12, '14.
Rausch Creek Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18,
Russ NRA Benefactor Member

User avatar
PWJouster
50_Posts
50_Posts
Posts: 180
Joined: Wed Dec 27, 2017 8:44 am
Model Year: 2018

Re: New Rear Bumper?

Post by PWJouster » Mon Oct 15, 2018 9:48 am

Need new bumpers noooowwwww.

i love the rear tube bumper that Maple built. and it would fit well with a thuren style or Kinzer style front bumper...
totally forgot that i would be ok with a front camera to do away with the sensors...

im ready when your ready, to the guys developing bumpers as we speak...we are all ready!
2018 Powerwagon
Thuren King 3.0-S3 & 2.5-S2 with King Stab, TBs, Boogies and
Dodge-Off-Road Steering Brace
Method NV 17s
Toyo RT 35x12.5/17
Purple Cranium F&R
S&B Intake
Exhaust

User avatar
BoldAdventure
Moderator
Moderator
Posts: 2082
Joined: Fri Mar 25, 2016 11:23 am
Model Year: 2015
Location: Nomadic
Contact:

Re: New Rear Bumper?

Post by BoldAdventure » Mon Oct 15, 2018 9:56 am

Reloaderguy wrote:
Sun Oct 14, 2018 11:46 pm
The Kinzer bumper needs serious work, if you can even get one.
It looked like from the pictures of both Nathan and Shawn's bumpers that it's slightly better. But Nathan said it's still pretty rough. But what they both dealt with in terms of getting the bumper (Kyes total lack of communication/support) that it's still a 50/50 gamble with the Kinzer. At least so far, he's never just taken money. The one guy who ordered and never got it, got his money back. So he's at least got that going for him.
2015 Power Wagon Laramie - "ROCKLANDER"
[Build Thread] [Instagram] [Youtube]

User avatar
BoldAdventure
Moderator
Moderator
Posts: 2082
Joined: Fri Mar 25, 2016 11:23 am
Model Year: 2015
Location: Nomadic
Contact:

Re: New Rear Bumper?

Post by BoldAdventure » Mon Oct 15, 2018 9:58 am

Anyways, here is what I'm working towards. This solves my wants & needs.

:popcorn:
Attachments
high-clearance-1.jpg
high-clearance-2-ready-for-production.jpg
2015 Power Wagon Laramie - "ROCKLANDER"
[Build Thread] [Instagram] [Youtube]

Easttnrhino
50_Posts
50_Posts
Posts: 217
Joined: Sun Mar 06, 2016 7:11 pm
Model Year: 2014
Location: athens tn

Re: New Rear Bumper?

Post by Easttnrhino » Mon Oct 15, 2018 10:21 am

I agree with bold adventure
2017 wagon in beautiful east tn

TankerZak
500_Posts
500_Posts
Posts: 534
Joined: Sun Nov 13, 2016 1:43 pm
Model Year: 2016

Re: New Rear Bumper?

Post by TankerZak » Mon Oct 15, 2018 10:42 am

High clearance 2 and a cleaned up Kinzer would be about perfect. I already have a front camera but was making it removable for offroad only. Just need to mount it. So it's not really a parking solution. Not that i really need front parking sensors. You drive a truck enough and you know where the front is... and if you have a solid bumper you can care less.... i also hate it when the sensors go off in the rain for no reason.

Sent from my SM-G955U using Tapatalk



2016 Granite Crystal Metallic Power Wagon Laramie, no graphics, debadged, Thuren front and rear coils, Traxada rear 1 inch spacer, Thuren rear swaybar links, Thuren rear trackbar, King 3.0 (Stage 4) front shocks, King 2.5 (Stage 3) rear shocks, Boogie front bump stops, Toyo RT 37x12.5R17 on Raceline Avenger 17x9 +20 wheels, DOR steering brace, Thuren King Steering Damper, White Knuckle rock sliders, Dethloff skid plate, Purple Cranium Half Spider front and rear diff guards, Airlift Ultimate airbags with Daystar cradles, Bakflip Revolver X2 tonneau, AMP BedStep, Factor55 Ultrahook with 100ft 7/16 synthetic winch line, Zroadz Grill with slim 20 inch light bar, DDM Tuning LEDs/HIDs, Magnaflow 19200 modified with upgraded resonator and after axle dump, tinted front windows 35%.

User avatar
Reloaderguy
1000_Posts
1000_Posts
Posts: 1967
Joined: Tue Feb 09, 2016 8:06 am
Model Year: 2016
Location: Central Oregon

Re: New Rear Bumper?

Post by Reloaderguy » Mon Oct 15, 2018 10:49 am

RustyPW wrote:
Mon Oct 15, 2018 4:45 am
The double fairlead sucks. If there is any extra clearance around the mounting holes between the bumper and frame. Everytime you use the winch. The bumper will move up or down. If you have lights mounted on the bumper. They will be off of their aim. Either pointing up or down from where you had them pointed at. My Aluminess bumper has a little extra clearance around the bolt holes and it drives me crazy. :roll:
Aluminess sucks, sorry.
Best Year Power Wagon

RustyPW
2000_Posts
2000_Posts
Posts: 4152
Joined: Thu May 24, 2012 4:23 pm
Model Year: 2008
Location: Brownsville Pa.

Re: New Rear Bumper?

Post by RustyPW » Mon Oct 15, 2018 4:29 pm

Reloaderguy wrote:
Mon Oct 15, 2018 10:49 am
RustyPW wrote:
Mon Oct 15, 2018 4:45 am
The double fairlead sucks. If there is any extra clearance around the mounting holes between the bumper and frame. Everytime you use the winch. The bumper will move up or down. If you have lights mounted on the bumper. They will be off of their aim. Either pointing up or down from where you had them pointed at. My Aluminess bumper has a little extra clearance around the bolt holes and it drives me crazy. :roll:
Aluminess sucks, sorry.
What's your experience with them?
PWOC #53
2008 POWER WAGON RC
Mods to the PW; Nerffed Mopar RockRails, Wheel Well Liners, Bushwacker Pocket Fender Flairs, Garvmin dezl 560LMT GPS, Power Wagon Winch Kit, Line X Ultra Bed Liner, PIAA Headlight Bulbs, PIAA 580 Driving Lights (135 watt), PIAA 520 Fog Lights (135 watt), PIAA 520 ATP Off-Road Lights (135 watt), Locker Bypass, Modifed Rockcrusher Diff Covers, Mopar Utility Bed Rails and Tool Box, Warn Winch Wireless Remote Control, "el-cheapo" Inclinometer, Airaid CAI, Winch TPS Bypass, 35" Toyo's, Mopar Spare Tire Lock, 'T' Steering Linkage, Modifed PSC Steering Brace, P3 Brake Controller, Modifed Fusion "mall crawler" rear bumper , PIAA 1500 Back-Up Lights, 1Ton HEMI Tranny Cooler, Leer 100XR Bed Cap, Factory Tow Mirrors, CenterLine Rims 17x9-5.25 BS, Mag-Hytec Tranny Pan, AutoMeter Gauges, PSC Extreme Hydro Assist Steering, Carli G2 Track Bar, Carli Ball-Joints, Dynatrac FreeSpin Hubs, Snorkel, RCV Axles, EBC Pads & Rotors, Aluminess Front Bumper, BIG Pul-Pal, 60" Extreme Hi-lift Jack, and more riggin' equipment, Carli Long Travel Air Bags, Bilstein 7100 Shocks - Carli Valving, Carli Control Arms, Thuren 3" SoftRide Springs, Thuren Rear Shackles, MagnaFlow Muffler, Crown Stainless Brake Lines, MORE STUFF COMIN'.

Moab '10, '12, '14.
Rausch Creek Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18,
Russ NRA Benefactor Member

User avatar
Reloaderguy
1000_Posts
1000_Posts
Posts: 1967
Joined: Tue Feb 09, 2016 8:06 am
Model Year: 2016
Location: Central Oregon

Re: New Rear Bumper?

Post by Reloaderguy » Mon Oct 15, 2018 7:14 pm

RustyPW wrote:
Mon Oct 15, 2018 4:29 pm
Reloaderguy wrote:
Mon Oct 15, 2018 10:49 am
RustyPW wrote:
Mon Oct 15, 2018 4:45 am
The double fairlead sucks. If there is any extra clearance around the mounting holes between the bumper and frame. Everytime you use the winch. The bumper will move up or down. If you have lights mounted on the bumper. They will be off of their aim. Either pointing up or down from where you had them pointed at. My Aluminess bumper has a little extra clearance around the bolt holes and it drives me crazy. :roll:
Aluminess sucks, sorry.
What's your experience with them?
Apparently they move up and down when you use the winch.
Best Year Power Wagon

RustyPW
2000_Posts
2000_Posts
Posts: 4152
Joined: Thu May 24, 2012 4:23 pm
Model Year: 2008
Location: Brownsville Pa.

Re: New Rear Bumper?

Post by RustyPW » Mon Oct 15, 2018 9:39 pm

Reloaderguy wrote:
Mon Oct 15, 2018 7:14 pm
RustyPW wrote:
Mon Oct 15, 2018 4:29 pm
Reloaderguy wrote:
Mon Oct 15, 2018 10:49 am


Aluminess sucks, sorry.
What's your experience with them?
Apparently they move up and down when you use the winch.
:lol:
PWOC #53
2008 POWER WAGON RC
Mods to the PW; Nerffed Mopar RockRails, Wheel Well Liners, Bushwacker Pocket Fender Flairs, Garvmin dezl 560LMT GPS, Power Wagon Winch Kit, Line X Ultra Bed Liner, PIAA Headlight Bulbs, PIAA 580 Driving Lights (135 watt), PIAA 520 Fog Lights (135 watt), PIAA 520 ATP Off-Road Lights (135 watt), Locker Bypass, Modifed Rockcrusher Diff Covers, Mopar Utility Bed Rails and Tool Box, Warn Winch Wireless Remote Control, "el-cheapo" Inclinometer, Airaid CAI, Winch TPS Bypass, 35" Toyo's, Mopar Spare Tire Lock, 'T' Steering Linkage, Modifed PSC Steering Brace, P3 Brake Controller, Modifed Fusion "mall crawler" rear bumper , PIAA 1500 Back-Up Lights, 1Ton HEMI Tranny Cooler, Leer 100XR Bed Cap, Factory Tow Mirrors, CenterLine Rims 17x9-5.25 BS, Mag-Hytec Tranny Pan, AutoMeter Gauges, PSC Extreme Hydro Assist Steering, Carli G2 Track Bar, Carli Ball-Joints, Dynatrac FreeSpin Hubs, Snorkel, RCV Axles, EBC Pads & Rotors, Aluminess Front Bumper, BIG Pul-Pal, 60" Extreme Hi-lift Jack, and more riggin' equipment, Carli Long Travel Air Bags, Bilstein 7100 Shocks - Carli Valving, Carli Control Arms, Thuren 3" SoftRide Springs, Thuren Rear Shackles, MagnaFlow Muffler, Crown Stainless Brake Lines, MORE STUFF COMIN'.

Moab '10, '12, '14.
Rausch Creek Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18,
Russ NRA Benefactor Member

AlaskaTRX
Posts: 34
Joined: Fri Aug 03, 2018 1:27 am
Model Year: 2017
Location: Alaska
Contact:

Re: New Rear Bumper?

Post by AlaskaTRX » Thu Oct 18, 2018 1:55 am

Got the TDK rear bumper on. I’m really disappointed with the lack of gussets and it really is mostly for show. I wouldn’t buy it again if I had to do it over. The included lights for the license plate require cutting stock wires and I’m not down with that, so looking to source a stock female plug equivalent that I can rewire. I do like the looks of the black powder coat and bed liner on the top.
15BF0787-CD2C-4C0D-AA48-9E7BAEA1E517.jpeg
C1487823-BC11-4559-B337-3F1CD210CF38.jpeg
980BA175-FB4B-409A-A622-DA9876EB2278.jpeg
5C12DA3F-A00B-469A-AC50-2429854888DD.jpeg

Post Reply