New Rear Bumper?

If it's about Power Wagons, all generations, this is where it'll go. This is the original PWR Forum Power Wagon Technical Discussion Section. And this includes everything that doesn’t fit in any one of the other categories related to the truck goes here!
TankerZak
500_Posts
500_Posts
Posts: 657
Joined: Sun Nov 13, 2016 1:43 pm
Model Year: 2016

Re: New Rear Bumper?

Post by TankerZak » Sat Apr 27, 2019 4:40 pm

I'm soooo sold on this bumper...

Sent from my SM-G955U using Tapatalk

2016 Granite Crystal Metallic Power Wagon Laramie, graphics delete, debadged, Thuren front and rear coils, Thuren rear swaybar links, Thuren rear trackbar, Traxada rear 1 inch spacers, King 3.0 (Stage 4) front and 2.5 (Stage 3) rear shocks, Boogie front bump stops, Toyo RT 37x12.5R17 on XD Machette 17x9 +18 wheels, DOR steering brace, Thuren King Steering Damper, Thuren PW bumper, White Knuckle rock sliders, Dethloff skid plate, Purple Cranium Half Spider front and rear diff guards, Airlift Ultimate airbags with Daystar cradles, Bakflip Revolver X2 tonneau, AMP BedStep, Factor55 Ultrahook with 100ft 7/16 A.R.E. Spidersilk synthetic winch line, Zroadz Grill with slim 20 inch light bar, DDM Tuning LEDs/HIDs, Magnaflow 19200 modified with upgraded resonator and after axle dump, tinted front windows 35%.

User avatar
PWJouster
250_Posts
250_Posts
Posts: 390
Joined: Wed Dec 27, 2017 8:44 am
Model Year: 2018

Re: New Rear Bumper?

Post by PWJouster » Sun Apr 28, 2019 8:49 am

theres a line
2018 Powerwagon-6.4 Hemi
Nanny kill switch and Locker Bypasses
Thuren Tuned King 3.0 & 2.5 Pintop Stage 3/2
17 Method NV-Toyo RT 37
Evo On-Demand Air Swaybar Disconnect
S&B Intake-Mufflex-Magnaflow/resonator delete
SPOD Bantam
On-Board air ARB CKMTA12
Baja design and Rigid Industries
Purple Cranium Spider dif guards
Pedal Commander

User avatar
nts007
2000_Posts
2000_Posts
Posts: 2284
Joined: Wed Dec 11, 2013 10:01 pm
Model Year: 2008
Location: Sask, Canada, Earth

Re: New Rear Bumper?

Post by nts007 » Mon May 06, 2019 9:39 am

Hey guys. Just getting back into the swing of the forum and saw some bumper stuff here. How about some moab and truck night tested rear bumpers! 3 of our bolt on bumpers were in moab at pwim19 and getting throughly smashed against everything with some paint damage. The high clearance 4th Gen there is the final production prototype and pretty much never gets hit but when it does it’s as stout as an excavator bucket.
The bolt on bumper is a 3pc and ships with ups standard cutting shipping costs in half.
Thought I’d throw these up. www.mapleoffroad.com
Attachments
8D17C458-ACAE-462C-A778-5F2CD513ABCD.jpeg
3FB718C2-A2A2-474C-848E-4DB253BDC93C.jpeg
C543C6E2-5248-4CBF-8694-7D19DB1C808F.jpeg
49D6E868-A659-43E6-A739-2A60C36D4026.jpeg
CC5DDA6D-27CF-4DC7-8AC0-AFD966AF46F8.jpeg
29557874-E21D-4689-BA38-214D04F4DB53.jpeg
08 ctd--mini max--thuren 3" coils and LT Leaves--4.56 gears and lockers in pw axles--some lights--afe intake system--bd super b turbo--Banks w/m Injection--Dynatrac Balljoints--king 2.5"s--37" Hankook Dynapro MT--DOR Long arms--Custom emf track bar--Manual T-case swap--Full PW Under armor--PSC Hydro Assist and so much more

KevinABQ
50_Posts
50_Posts
Posts: 228
Joined: Thu Oct 19, 2017 4:32 pm
Model Year: 2018
Location: Albuquerque

Re: New Rear Bumper?

Post by KevinABQ » Mon May 06, 2019 1:10 pm

The Gen 4 High Clearance looks interesting. Going with a Class 5 hitch on that? Where does the trailer electrical connector go?
2018 White Rambox, Diamondback HD bed cover, White Knuckle sliders, Carli and Purple Cranium diff guards, masterpull 11mm superline, 37 Toyo MT.

User avatar
PWJouster
250_Posts
250_Posts
Posts: 390
Joined: Wed Dec 27, 2017 8:44 am
Model Year: 2018

Re: New Rear Bumper?

Post by PWJouster » Mon May 06, 2019 2:27 pm

i just have no idea what i would do with my license plate.
2018 Powerwagon-6.4 Hemi
Nanny kill switch and Locker Bypasses
Thuren Tuned King 3.0 & 2.5 Pintop Stage 3/2
17 Method NV-Toyo RT 37
Evo On-Demand Air Swaybar Disconnect
S&B Intake-Mufflex-Magnaflow/resonator delete
SPOD Bantam
On-Board air ARB CKMTA12
Baja design and Rigid Industries
Purple Cranium Spider dif guards
Pedal Commander

User avatar
nts007
2000_Posts
2000_Posts
Posts: 2284
Joined: Wed Dec 11, 2013 10:01 pm
Model Year: 2008
Location: Sask, Canada, Earth

Re: New Rear Bumper?

Post by nts007 » Mon May 06, 2019 5:25 pm

KevinABQ wrote:
Mon May 06, 2019 1:10 pm
The Gen 4 High Clearance looks interesting. Going with a Class 5 hitch on that? Where does the trailer electrical connector go?
This one posted is just straight bumper. The one with plate holder is cut in to the left side of the hitch and also houses the electrical connection. Tucked in as high as possible to protect it. These qualify as a class 4 hitch with the 2” receiver. For a powerwagon a class 4 hitch still exceeds its max legal towing capacity. Ram puts the class 5 on everything right now as it’s cheaper to mass produce one hitch. The high clearance was made as a proof of concept to production. I originally did not expect too many to sell. But after this last week in moab it looks like it will be a production model with Plate holder and electricals. It will not include the backup sensors though
08 ctd--mini max--thuren 3" coils and LT Leaves--4.56 gears and lockers in pw axles--some lights--afe intake system--bd super b turbo--Banks w/m Injection--Dynatrac Balljoints--king 2.5"s--37" Hankook Dynapro MT--DOR Long arms--Custom emf track bar--Manual T-case swap--Full PW Under armor--PSC Hydro Assist and so much more

User avatar
nts007
2000_Posts
2000_Posts
Posts: 2284
Joined: Wed Dec 11, 2013 10:01 pm
Model Year: 2008
Location: Sask, Canada, Earth

Re: New Rear Bumper?

Post by nts007 » Mon May 06, 2019 5:26 pm

I am doing another one soon with plate mount and electrical and once it’s finished up it will be on the site ready to go.
08 ctd--mini max--thuren 3" coils and LT Leaves--4.56 gears and lockers in pw axles--some lights--afe intake system--bd super b turbo--Banks w/m Injection--Dynatrac Balljoints--king 2.5"s--37" Hankook Dynapro MT--DOR Long arms--Custom emf track bar--Manual T-case swap--Full PW Under armor--PSC Hydro Assist and so much more

User avatar
olyelr
2000_Posts
2000_Posts
Posts: 3590
Joined: Sun Dec 07, 2014 9:00 pm
Model Year: 2016
Location: Kewadin, MI

Re: New Rear Bumper?

Post by olyelr » Mon May 06, 2019 6:23 pm

Well hell yes, options are good :rockon:
2016 Ram Power Wagon Laramie - Granite Crystal Metallic - Ramboxes - 35” AT3W - TazerRAM

:patriot:

KevinABQ
50_Posts
50_Posts
Posts: 228
Joined: Thu Oct 19, 2017 4:32 pm
Model Year: 2018
Location: Albuquerque

Re: New Rear Bumper?

Post by KevinABQ » Mon May 06, 2019 9:12 pm

Backup sensors are actually pretty useful when not climbing rocks. Though the camera is good, I’d have backed into a pretty high ledge on Moab rim crest as I parked without the sensors on.
2018 White Rambox, Diamondback HD bed cover, White Knuckle sliders, Carli and Purple Cranium diff guards, masterpull 11mm superline, 37 Toyo MT.

User avatar
nts007
2000_Posts
2000_Posts
Posts: 2284
Joined: Wed Dec 11, 2013 10:01 pm
Model Year: 2008
Location: Sask, Canada, Earth

Re: New Rear Bumper?

Post by nts007 » Tue May 07, 2019 10:02 am

Z turn on moab rim.
Attachments
CA491E09-4867-4396-BF6A-AAE4DBDFFB63.jpeg
08 ctd--mini max--thuren 3" coils and LT Leaves--4.56 gears and lockers in pw axles--some lights--afe intake system--bd super b turbo--Banks w/m Injection--Dynatrac Balljoints--king 2.5"s--37" Hankook Dynapro MT--DOR Long arms--Custom emf track bar--Manual T-case swap--Full PW Under armor--PSC Hydro Assist and so much more

KevinABQ
50_Posts
50_Posts
Posts: 228
Joined: Thu Oct 19, 2017 4:32 pm
Model Year: 2018
Location: Albuquerque

Re: New Rear Bumper?

Post by KevinABQ » Tue May 07, 2019 10:32 am

nts007 wrote:
Tue May 07, 2019 10:02 am
Z turn on moab rim.
Nice.
2018 White Rambox, Diamondback HD bed cover, White Knuckle sliders, Carli and Purple Cranium diff guards, masterpull 11mm superline, 37 Toyo MT.

trailerpup
Posts: 10
Joined: Mon Aug 05, 2019 6:51 pm
Model Year: 2018

Re: New Rear Bumper?

Post by trailerpup » Tue Oct 15, 2019 7:12 pm

i ended up with the expo1. no problems so far. 9 weeks from order to delivery. went on pretty smoothly. i'm not sure what to do about the license plate lights. other than that it seems pretty solid.
Attachments
IMG_E0066.JPG

User avatar
Oilbrnr
50_Posts
50_Posts
Posts: 93
Joined: Tue May 02, 2017 7:26 pm
Model Year: 2016
Location: Flagstaff & Scottsdale, Arizona

Re: New Rear Bumper?

Post by Oilbrnr » Tue Oct 15, 2019 7:58 pm

I just tapped into the parking light wire for the trailer harness. Same one as the clearance lights for your FWC.

And a bit of advise, familiarize yourself with how to get the latch to release from the backside and what kind of tool you'll need to carry to do so. Unless they've radically changed the latch, you'll need to know at some point.

I have yet to really pursue having my arms modified to clear the Hawk, mainly due to lack of funds. I'm sure it will be 1-1.5k to have the work done.
2016 Thuren 3.0/2.5 and stabilizer, F/R tracks, Front springs, OEM/AirLift-Daystar rear.
2017 FWCamper - Hawk

Post Reply