o ring for p/s reservoir
o ring for p/s reservoir
have a small leak between the pump and reservoir...cant find any part#s for this o-ring.. anybody ever change one?
- Low_Sky
- 500_Posts
- Posts: 957
- Joined: Fri May 01, 2015 7:12 pm
- Model Year: 2015
- Location: Eagle River, Alaska
Re: o ring for p/s reservoir
Barring finding an actual part number, can you get it to a Fastenal or Grainger and just measure it for a replacement?
Re: o ring for p/s reservoir
yup, or find a local industrial shop that can make an O-ring for you, if they don't have something off the shelf that'll work.
Bearing/motion supply shops can usually do some sealing work as well. I've got a shop nearby that specializes in seals/packing/O-rings.
Bearing/motion supply shops can usually do some sealing work as well. I've got a shop nearby that specializes in seals/packing/O-rings.
Re: o ring for p/s reservoir
I’ve changed it several times replacing pumps, you may have to buy a new reservoir to get the factory piece, or just disassemble and match it up to an o ring at an industrial place or Napa etc.
The factory connection between the reservoir and pump has the o ring AND a little plastic restrictor that can get brittle with age. So don’t lose that or break it just FYI
The factory connection between the reservoir and pump has the o ring AND a little plastic restrictor that can get brittle with age. So don’t lose that or break it just FYI
Central Texas and Houston area
2009 5.7 auto quadcab
Carli 3” coils deaver leafs 3” kings with 4 tube bypass rear and fr/rr hydro bumps
Howe steering pump and gear with hydraulic ram assist
Custom tube bumpers and white knuckle sliders
Creative fab trussed axle. rem polished and cryoed 5.13 gears with arb lockers fr/rr
Sharadon stage 2 545rfe with 3000 stall edge converter
Lots of other stuff lol
2009 5.7 auto quadcab
Carli 3” coils deaver leafs 3” kings with 4 tube bypass rear and fr/rr hydro bumps
Howe steering pump and gear with hydraulic ram assist
Custom tube bumpers and white knuckle sliders
Creative fab trussed axle. rem polished and cryoed 5.13 gears with arb lockers fr/rr
Sharadon stage 2 545rfe with 3000 stall edge converter
Lots of other stuff lol
Re: o ring for p/s reservoir
.. I found a used p/s setup online from an 05 p.w. from B&R auto wreckers in Oregon to keep as a spare...and do what you guys suggest with the o-ring...thanks
- Retired BLM Rig
- 1000_Posts
- Posts: 1118
- Joined: Sun Jan 31, 2016 6:51 pm
- Model Year: 2008
- Location: State of Jefferson
Re: o ring for p/s reservoir
I have an extra small parts bag leftover from the last time I did a pump and reservoir, it comes with screws, o-rings and the little plastic restrictor, part# 68034315AB. I don’t know if its available by itself, but I think that’s what you need.
2008 Quad Cab - Stock RTI = 655, curb weight = 6081 lbs. Abel Components Plug & Play Locker Bypass®, Abel Components Full SmartBar Bypass®, Abel Components Nanny Kill Switch®, 2000 Watt ProMariner TruePower Plus Pure Sine Wave Inverter, Trailer Hitch Storage, MOLLE Door Panels, Wilton Hitch Vice, Locking Under Seat Storage Drawer, Smittybilt 2781 Air Compressor, 14K PullPal, Hi-Lift First Responder Jack, 25' Jumper Cable System, Slip Yoke Eliminator in a Can, Evolution vs. God, Share the Umbrella, Make sure you're right with God before you meet him!
Re: o ring for p/s reservoir
if those parts work for a 05 p.w...il buy them..but what I found was all discontinued for my p.w..
- coder
- 1000_Posts
- Posts: 1347
- Joined: Wed Jun 06, 2012 5:18 pm
- Model Year: 2007
- Location: Trabuco Canyon, CA
Re: o ring for p/s reservoir
Those look like they are for new PS I think I have some in my garage as well. Time to upgrade!
But if not, any hardware store that sells o'rings should have replacements just take your's in and find the matching size.
But if not, any hardware store that sells o'rings should have replacements just take your's in and find the matching size.
Vehicle: 2007 Power Wagon Quad Cab - Factory Options (Inferno Red, Premium Cloth Bench Seat, Light Group, Automatic Transmission, Leather Steering Wheel)
Suspension: Carli 3" Hemi Coils, Carli Control Arms, Carli King 2.5 Pin-Tops, Carli Stainless Steering Stabilizer, Carli Trackbar | Synergy 1" Rear Shackle
Performance: Magnaflow Muffler | Magnaflow Y-Pipe
Wheels/Tires: Yokohama X-A/T 35x12.5x17
Steering/Drivetrain/Axles: Carli Front Diff Guard | Dynatrac Ball Joints | Mopar HD Steering Gear
Miscellaneous: Line-X Bedliner | Locker Bypass Switch | Mopar Rock Rails | Odyssey Extreme 65-PC1750T | Performance Friction Brake Pads | Weathertech Digital Fit Mats | Winch Thermal Protection Bypass
Suspension: Carli 3" Hemi Coils, Carli Control Arms, Carli King 2.5 Pin-Tops, Carli Stainless Steering Stabilizer, Carli Trackbar | Synergy 1" Rear Shackle
Performance: Magnaflow Muffler | Magnaflow Y-Pipe
Wheels/Tires: Yokohama X-A/T 35x12.5x17
Steering/Drivetrain/Axles: Carli Front Diff Guard | Dynatrac Ball Joints | Mopar HD Steering Gear
Miscellaneous: Line-X Bedliner | Locker Bypass Switch | Mopar Rock Rails | Odyssey Extreme 65-PC1750T | Performance Friction Brake Pads | Weathertech Digital Fit Mats | Winch Thermal Protection Bypass
- Retired BLM Rig
- 1000_Posts
- Posts: 1118
- Joined: Sun Jan 31, 2016 6:51 pm
- Model Year: 2008
- Location: State of Jefferson
Re: o ring for p/s reservoir
My parts were for an 09 1500, they may be different than an 05, but it’s the same as my 08.
Looking it up on the internet, there appears to be a change between 07 & 08.
Looking it up on the internet, there appears to be a change between 07 & 08.
2008 Quad Cab - Stock RTI = 655, curb weight = 6081 lbs. Abel Components Plug & Play Locker Bypass®, Abel Components Full SmartBar Bypass®, Abel Components Nanny Kill Switch®, 2000 Watt ProMariner TruePower Plus Pure Sine Wave Inverter, Trailer Hitch Storage, MOLLE Door Panels, Wilton Hitch Vice, Locking Under Seat Storage Drawer, Smittybilt 2781 Air Compressor, 14K PullPal, Hi-Lift First Responder Jack, 25' Jumper Cable System, Slip Yoke Eliminator in a Can, Evolution vs. God, Share the Umbrella, Make sure you're right with God before you meet him!
Re: o ring for p/s reservoir
ok...il shop around for the o-ring then...shouldn't be hard to find one......
Re: o ring for p/s reservoir
well I took the p/s pump off...and it turns out it wasn't the o-ring but the pump its self..rear was leaking from the c-ring...any chance anyone have part#s ...?...or any 3 bolt pump will work...reservoir looks fine and also the scene..
- Retired BLM Rig
- 1000_Posts
- Posts: 1118
- Joined: Sun Jan 31, 2016 6:51 pm
- Model Year: 2008
- Location: State of Jefferson
Re: o ring for p/s reservoir
O.E. part #68034330AB $460.00 +-.
Lots of choices on Napa's website, depending on your configuration: New/Reman, W/ or W/O reservoir, W/ or W/O pulley.
I would get something local, from a nationwide chain that is name brand and has a lifetime warranty. Then carry the receipt in your truck for when it dies again.
Flush your P/S & brake fluid every 30K and the components will be happy longer. (especially brake fluid, it's hygroscopic)
Lots of choices on Napa's website, depending on your configuration: New/Reman, W/ or W/O reservoir, W/ or W/O pulley.
I would get something local, from a nationwide chain that is name brand and has a lifetime warranty. Then carry the receipt in your truck for when it dies again.
Flush your P/S & brake fluid every 30K and the components will be happy longer. (especially brake fluid, it's hygroscopic)
2008 Quad Cab - Stock RTI = 655, curb weight = 6081 lbs. Abel Components Plug & Play Locker Bypass®, Abel Components Full SmartBar Bypass®, Abel Components Nanny Kill Switch®, 2000 Watt ProMariner TruePower Plus Pure Sine Wave Inverter, Trailer Hitch Storage, MOLLE Door Panels, Wilton Hitch Vice, Locking Under Seat Storage Drawer, Smittybilt 2781 Air Compressor, 14K PullPal, Hi-Lift First Responder Jack, 25' Jumper Cable System, Slip Yoke Eliminator in a Can, Evolution vs. God, Share the Umbrella, Make sure you're right with God before you meet him!
Re: o ring for p/s reservoir
just a thought... will a unit from 11-12 ram work?...thanks for p/n...
- Retired BLM Rig
- 1000_Posts
- Posts: 1118
- Joined: Sun Jan 31, 2016 6:51 pm
- Model Year: 2008
- Location: State of Jefferson
Re: o ring for p/s reservoir
I don't know, maybe.
I would take the original pump to an auto parts store and make some comparisons side by side, focusing on mounting bosses, hose connections and pulley offset/shaft length.
2008 Quad Cab - Stock RTI = 655, curb weight = 6081 lbs. Abel Components Plug & Play Locker Bypass®, Abel Components Full SmartBar Bypass®, Abel Components Nanny Kill Switch®, 2000 Watt ProMariner TruePower Plus Pure Sine Wave Inverter, Trailer Hitch Storage, MOLLE Door Panels, Wilton Hitch Vice, Locking Under Seat Storage Drawer, Smittybilt 2781 Air Compressor, 14K PullPal, Hi-Lift First Responder Jack, 25' Jumper Cable System, Slip Yoke Eliminator in a Can, Evolution vs. God, Share the Umbrella, Make sure you're right with God before you meet him!
Re: o ring for p/s reservoir
A generic TC style pump will work. Much cheaper and can be had in higher output as well. Just needs a little work to mount a reservoir etc.
Central Texas and Houston area
2009 5.7 auto quadcab
Carli 3” coils deaver leafs 3” kings with 4 tube bypass rear and fr/rr hydro bumps
Howe steering pump and gear with hydraulic ram assist
Custom tube bumpers and white knuckle sliders
Creative fab trussed axle. rem polished and cryoed 5.13 gears with arb lockers fr/rr
Sharadon stage 2 545rfe with 3000 stall edge converter
Lots of other stuff lol
2009 5.7 auto quadcab
Carli 3” coils deaver leafs 3” kings with 4 tube bypass rear and fr/rr hydro bumps
Howe steering pump and gear with hydraulic ram assist
Custom tube bumpers and white knuckle sliders
Creative fab trussed axle. rem polished and cryoed 5.13 gears with arb lockers fr/rr
Sharadon stage 2 545rfe with 3000 stall edge converter
Lots of other stuff lol
Re: o ring for p/s reservoir
new upgrade on pump..all new no refub... got a steal on ebay...putting the pulley on was a pain..made sure it was the same distance from the rear of the pump as the original