Tires Fitment

If it's about Power Wagons, this is where it'll go.
Post Reply
DirtyOffroad
Posts: 24
Joined: Mon Dec 04, 2017 11:46 am
Model Year: 2014

Tires Fitment

Post by DirtyOffroad » Tue Apr 17, 2018 6:51 am

Might run into an issue with tire fitment, though very slightly. My understanding is that there is a pinch weld on the rear side of the front wheel well. What is the proper fix for it? I know on my jeeps I always beat them flat and painted them
2018 Ram 2500 Powerwagon
Merrick Dodge/Chryler/Jeep Salesman - Long Island, New York.

User avatar
adeluca73
2000_Posts
2000_Posts
Posts: 2104
Joined: Mon May 19, 2014 9:56 pm
Model Year: 2014
Location: The Pentagon, VA

Re: Tires Fitment

Post by adeluca73 » Tue Apr 17, 2018 7:32 am

DirtyOffroad wrote:
Tue Apr 17, 2018 6:51 am
Might run into an issue with tire fitment, though very slightly. My understanding is that there is a pinch weld on the rear side of the front wheel well. What is the proper fix for it? I know on my jeeps I always beat them flat and painted them
Dremel & mallet
2014 Ram PW SLT: 1st year of the Best Gen
<Build Thread>

Colibri
1000_Posts
1000_Posts
Posts: 1461
Joined: Mon Jun 08, 2015 3:44 pm
Model Year: 2009

Re: Tires Fitment

Post by Colibri » Tue Apr 17, 2018 8:58 am

Beat flat and paint worked for me. I did a couple relief cuts on the pinch weld so it folded over perfectly flat and rounded the end of the pinch weld that was still standing with a grinder.
Central Texas and Houston area
2009 5.7 auto quadcab
Carli 3” coils deaver leafs 3” kings with 4 tube bypass rear and fr/rr hydro bumps
Howe steering pump and gear with hydraulic ram assist
Custom tube bumpers and white knuckle sliders
Creative fab trussed axle. rem polished and cryoed 5.13 gears with arb lockers fr/rr
Sharadon stage 2 545rfe with 3000 stall edge converter
Lots of other stuff lol

NickTF
250_Posts
250_Posts
Posts: 374
Joined: Thu Feb 11, 2016 12:01 pm
Model Year: 2014

Re: Tires Fitment

Post by NickTF » Tue Apr 17, 2018 10:30 am

I used an air powered body saw to cut pinch weld area back to the plug weld portion and used chassis saver paint to make certain it didn't rust. Used a heat gun to reform (and partially mangle due to too much heat and plastic sticking to wood I used to push it/mold it) plastic wheel liners.

User avatar
olyelr
2000_Posts
2000_Posts
Posts: 2893
Joined: Sun Dec 07, 2014 8:00 pm
Model Year: 2014
Location: Kewadin, MI

Re: Tires Fitment

Post by olyelr » Tue Apr 17, 2018 12:54 pm

NickTF wrote:
Tue Apr 17, 2018 10:30 am
...(and partially mangle due to too much heat and plastic sticking to wood I used to push it/mold it)....
:lol:

Is this on a 4th gen? Any pics of the process or outcome?
2016 Ram Power Wagon Laramie - Granite Crystal Metallic - Ramboxes :patriot:

NickTF
250_Posts
250_Posts
Posts: 374
Joined: Thu Feb 11, 2016 12:01 pm
Model Year: 2014

Re: Tires Fitment

Post by NickTF » Tue Apr 17, 2018 1:33 pm

olyelr wrote:
Tue Apr 17, 2018 12:54 pm
NickTF wrote:
Tue Apr 17, 2018 10:30 am
...(and partially mangle due to too much heat and plastic sticking to wood I used to push it/mold it)....
:lol:

Is this on a 4th gen? Any pics of the process or outcome?
Yes, my 15 cough cough some guys 15 cough cough. I prefer to hide the evidence of stupidity/newness with a heat gun. :doh: :lol:

Post Reply