Thuren 3.0 KING on 2018 Powerwagon!

If it's about Power Wagons, this is where it'll go.
Post Reply
User avatar
PWJouster
Posts: 13
Joined: Wed Dec 27, 2017 7:44 am
Model Year: 2014

Thuren 3.0 KING on 2018 Powerwagon!

Post by PWJouster » Mon Feb 12, 2018 3:22 pm

Don was seriously helpful while I was being very inarticulate in my wants and needs acting like a teething baby or 6 month old male puppy.

I have come to this below build to start off my powerwagon dreams. my intent are to install the below, and address sway bars and stabilizers after the fact.
with the release of the 3.0 came the trigger finger swiftly.
stage 3 front
stage 2 rear
aggressive daily driving with speeds up to 80MPH and swiftly exiting and entering highways and driveways.

king 3.0 front
King 2.5 rear
springs
boogies
F and R trackbars




2013+ FRONT COILS
CHOOSE ENGINE AND HEIGHT OPTION
2014+ RAM 2500 HEMI 3.00" FRONT LIFT
TF-RAFC-13UP-14ULRFC-2H3$320.00
Ordered: 1
$320.00
2014+ 2500 REAR COIL KIT
SELECT HEIGHT OPTION
1" LIFT REAR COIL KIT
TF-4LRCEL-14U-4LRCK1"LIFT$520.00
Ordered: 1
$520.00
2013+ FRONT TRACK BAR
TF-RAFTB-18MM$330.00
Ordered: 1
$330.00
14+ 2500 REAR TRACKBAR KIT
TF-RLR2500-TBK$330.00
Ordered: 1
$330.00
BOOGIE BUMP PAIR
MOUTNING BRACKET
Front moutning brackets - Pair
Lift Height
0-3"
TF-BBSTO-PAIR-BBFBO-BRPR$280.00
Ordered: 1
$280.00
BOOGIE BUMP PAIR
MOUTNING BRACKET
Rear mounting brackets - Pair
Lift Height
0-3"
TF-BBSTO-PAIR-BBRBO-BRPR$280.00
Ordered: 1
$280.00
THUREN KING 3.0 FRONT
SHOCK POSITION
FRONT PAIR REMOTE RESERVOIR - FOR 2013+ 3500 / 2014+ 25 ...
SHOCK POSITION
FRONT PAIR REMOTE RESERVOIR - FOR 2013+ 3500 / 2014+ 2500
FRONT RESERVOIR MOUNTS
REQUIRED TO MOUNT THESE FRONT SHOCKS
VALVING TUNE OPTION
STAGE 3
Please enter truck information, suspension setup, use and other information that may help with shock valving. Example: 2006 Ram 2500, Thuren front coils, stock rear leafs with air bags. Tow 15k often on wash board roads.
DON LOADED CART. 2018 POWER WAGON. FOCUS ON WASHBOARD C ...
Please enter truck information, suspension setup, use and other information that may help with shock valving. Example: 2006 Ram 2500, Thuren front coils, stock rear leafs with air bags. Tow 15k often on wash board roads.
DON LOADED CART. 2018 POWER WAGON. FOCUS ON WASHBOARD CONTROL AND ALSO MODERATE REBOUND FOR SLOW SPEED STABILITY.
TF-KING30-RA-TF-KS30F-RA9-RESMK-13U$1,585.00
Ordered: 1
$1,585.00
THUREN KING 2.5 SHOCKS
SHOCK POSITION
REAR PIN-SHAFT PAIR FOR 2014+ 2500
FRONT RESERVOIR MOUNTS
NOT NEEDED. ORDERING REAR SHOCKS
LEAF SPRUNG 3500 REAR SHOCKS
I HAVE A 2500
STAINLESS STEEL SHAFTS
STAINLESS STEEL SHAFTS
SHOCK BODY COLOR
BLACK CERAKOTE BODY AND BLACK RESERVOIR
ALUMINUM ENDS/CAPS COLOR
STANDARD KING BLUE
REMOTE RESERVOIR
STANDARD SILVER
VALVING TUNE OPTION
STAGE 3
YES I UNDERSTAND TIMELINE
WE ARE ON KING'S TIMELINE. 5-6 WEEKS MINIMUM.
Please enter truck information, suspension setup, use and other information that may help with shock valving. Example: 2006 Ram 2500, Thuren front coils, stock rear leafs with air bags. Tow 15k often on wash board roads.
NO TOWING. MODERATE REBOUND FOR EXTRA STABILITY
TF-KING25-RA-TF-KS25R-10PP-SS-SHAFTS-BLACK-BODY$1,345.00
Ordered: 1
$1,345.00

SUSPENSION ORDERED

Waiting game begins

looking forward to this build more then ever and cant wait to update everyone with delivery, install , and outcome data.



who knew i would be looking at king 3.0 for the front!!!
2018 Powerwagon
soon- Thuren King 3.0&2.5
Method NV 17
Toyo RT 35x12.5/17

ramv
250_Posts
250_Posts
Posts: 396
Joined: Wed Feb 24, 2016 9:36 am

Re: Thuren 3.0 KING on 2018 Powerwagon!

Post by ramv » Mon Feb 12, 2018 10:25 pm

Awesome. Keep us updated.
2016 Power Wagon; White Knuckle sliders, 315 BFGs, BD 2Lo Kit, AEV ProCal, Airbags/Daystars

User avatar
PWJouster
Posts: 13
Joined: Wed Dec 27, 2017 7:44 am
Model Year: 2014

Re: Thuren 3.0 KING on 2018 Powerwagon!

Post by PWJouster » Tue Feb 13, 2018 9:09 am

the way Thuren will artfully deliver these kings, the petite 35s, the black on black on black... im thinking this suspension will need some rock lights.
IMG_0652.jpg
2018 Powerwagon
soon- Thuren King 3.0&2.5
Method NV 17
Toyo RT 35x12.5/17

User avatar
MikeKey
1000_Posts
1000_Posts
Posts: 1497
Joined: Fri Mar 25, 2016 9:23 am
Model Year: 2014
Location: Idaho
Contact:

Re: Thuren 3.0 KING on 2018 Powerwagon!

Post by MikeKey » Tue Feb 13, 2018 9:26 am

Yup, those 3.0's came out right after I put in my order for the 2.5's. But I don't really need the 3.0's as awesome as they would be since I have everything setup for slower speeds and crawling.

Now you get to wait around like the rest of us mortals in anticipation.
2015 Power Wagon Laramie - Moab Tested
[Build Thread] [Instagram]

User avatar
yellowranger1
250_Posts
250_Posts
Posts: 279
Joined: Tue Jun 07, 2016 2:06 pm
Model Year: 2014

Re: Thuren 3.0 KING on 2018 Powerwagon!

Post by yellowranger1 » Tue Feb 13, 2018 10:15 am

The 3.0s will be badass! I think my favorite part about them is that they're coming in black cerakote... DROOL.

I'm really happy with the performance of my 2.5s, the 3.0s will only be better. Congrats on the killer setup! Where are you located? I know one guy down my way who ordered the 3.0s but he's putting them on a diesel.

User avatar
coder
1000_Posts
1000_Posts
Posts: 1194
Joined: Wed Jun 06, 2012 3:18 pm
Model Year: 2007
Location: Ladera Ranch, CA

Re: Thuren 3.0 KING on 2018 Powerwagon!

Post by coder » Tue Feb 13, 2018 10:59 am

My understanding is anything larger than 2.5's would be too large to fit through, without hitting, the rear shock holes in the frame has that be addressed somehow?
Last edited by coder on Tue Feb 13, 2018 2:29 pm, edited 1 time in total.
Vehicle: 2007 Power Wagon Quad Cab - Inferno Red
Suspension: Carli 3" Hemi Coils, Carli Control Arms, Carli King 2.5 Pin-Tops, Carli Stainless Steering Stabilizer, Carli Trackbar | Synergy 1" Rear Shackle
Performance: Magnaflow Muffler | Magnaflow Y-Pipe
Wheels/Tires: Toyo AT II's 35x12.5x17
Steering/Drivetrain/Axles: Carli Front Diff Guard | Dynatrac Ball Joints | Mopar HD Steering Gear
Miscellaneous: Line-X Bedliner | Locker Bypass Switch | Mopar Rock Rails | DieHard Platinum Battery G65 | Performance Friction Brake Pads | Weathertech Digital Fit Mats | Winch Thermal Protection Bypass

User avatar
MikeKey
1000_Posts
1000_Posts
Posts: 1497
Joined: Fri Mar 25, 2016 9:23 am
Model Year: 2014
Location: Idaho
Contact:

Re: Thuren 3.0 KING on 2018 Powerwagon!

Post by MikeKey » Tue Feb 13, 2018 11:17 am

coder wrote:
Tue Feb 13, 2018 10:59 am
My understanding is anything larger than 2.5's would be too large to fit through, withing hitting, the rear shock holes in the frame has that be addressed somehow?
No, these are Pintops for the front only currently.

https://www.thurenfabrication.com/produ ... front.html
2015 Power Wagon Laramie - Moab Tested
[Build Thread] [Instagram]

User avatar
PWJouster
Posts: 13
Joined: Wed Dec 27, 2017 7:44 am
Model Year: 2014

Re: Thuren 3.0 KING on 2018 Powerwagon!

Post by PWJouster » Tue Feb 13, 2018 11:39 am

yellowranger1 wrote:
Tue Feb 13, 2018 10:15 am
The 3.0s will be badass! I think my favorite part about them is that they're coming in black cerakote... DROOL.

I'm really happy with the performance of my 2.5s, the 3.0s will only be better. Congrats on the killer setup! Where are you located? I know one guy down my way who ordered the 3.0s but he's putting them on a diesel.
in in south florida so i wont be getting much dune bashing in, but i should be able to explore high speed gravel fire roads with washouts and ruts .


just type JW Corbett into google images. this is where youll find me
2018 Powerwagon
soon- Thuren King 3.0&2.5
Method NV 17
Toyo RT 35x12.5/17

User avatar
MikeKey
1000_Posts
1000_Posts
Posts: 1497
Joined: Fri Mar 25, 2016 9:23 am
Model Year: 2014
Location: Idaho
Contact:

Re: Thuren 3.0 KING on 2018 Powerwagon!

Post by MikeKey » Tue Feb 13, 2018 11:48 am

I've been out there. Seems more like a mud hole to me. Not going very fast at all. All the times we went out. Options in Florida are limited.
2015 Power Wagon Laramie - Moab Tested
[Build Thread] [Instagram]

User avatar
PWJouster
Posts: 13
Joined: Wed Dec 27, 2017 7:44 am
Model Year: 2014

Re: Thuren 3.0 KING on 2018 Powerwagon!

Post by PWJouster » Tue Feb 13, 2018 2:26 pm

MikeKey wrote:
Tue Feb 13, 2018 11:48 am
I've been out there. Seems more like a mud hole to me. Not going very fast at all. All the times we went out. Options in Florida are limited.
there is a ton of mud holes but the high grade can be take high speed, and there are clearing if you know where to look. ive seen buggies get launched into the air lol
2018 Powerwagon
soon- Thuren King 3.0&2.5
Method NV 17
Toyo RT 35x12.5/17

User avatar
coder
1000_Posts
1000_Posts
Posts: 1194
Joined: Wed Jun 06, 2012 3:18 pm
Model Year: 2007
Location: Ladera Ranch, CA

Re: Thuren 3.0 KING on 2018 Powerwagon!

Post by coder » Tue Feb 13, 2018 2:54 pm

MikeKey wrote:
Tue Feb 13, 2018 11:17 am
No, these are Pintops for the front only currently.

https://www.thurenfabrication.com/produ ... front.html
Thanks, nice upgrade!
Vehicle: 2007 Power Wagon Quad Cab - Inferno Red
Suspension: Carli 3" Hemi Coils, Carli Control Arms, Carli King 2.5 Pin-Tops, Carli Stainless Steering Stabilizer, Carli Trackbar | Synergy 1" Rear Shackle
Performance: Magnaflow Muffler | Magnaflow Y-Pipe
Wheels/Tires: Toyo AT II's 35x12.5x17
Steering/Drivetrain/Axles: Carli Front Diff Guard | Dynatrac Ball Joints | Mopar HD Steering Gear
Miscellaneous: Line-X Bedliner | Locker Bypass Switch | Mopar Rock Rails | DieHard Platinum Battery G65 | Performance Friction Brake Pads | Weathertech Digital Fit Mats | Winch Thermal Protection Bypass

User avatar
Rodeoflyer
250_Posts
250_Posts
Posts: 398
Joined: Fri Jun 17, 2016 8:53 am
Model Year: 2014
Location: New Braunfels, TX

Re: Thuren 3.0 KING on 2018 Powerwagon!

Post by Rodeoflyer » Sun Feb 18, 2018 2:01 pm

You'll be able to 'explore' a lot with those dampers including tearing up anything on roads made for common vehicles. I'm on full thuren springs, boogies, trackbars f/r, and king stage 5 front/4 rear. After 10k miles they are starting to break in and getting very, very smooth..

User avatar
PWJouster
Posts: 13
Joined: Wed Dec 27, 2017 7:44 am
Model Year: 2014

Re: Thuren 3.0 KING on 2018 Powerwagon!

Post by PWJouster » Mon Feb 19, 2018 8:30 am

Rodeoflyer wrote:
Sun Feb 18, 2018 2:01 pm
You'll be able to 'explore' a lot with those dampers including tearing up anything on roads made for common vehicles. I'm on full thuren springs, boogies, trackbars f/r, and king stage 5 front/4 rear. After 10k miles they are starting to break in and getting very, very smooth..

there is an entrance ramp to the highway that has an incline of about 10% that makes a sharp bank to the right to enter the highway 20 feet above grade.

this is 100% my testing and proving grounds.
i take this entrance ramp 5 days a week, typically free and clear road ahead. 10-20-30-40-45MPH easy. i say easy because i have balls of aluminum and a great sense of when vehicles are unsettled (track and offroad experience)

this entrance ramp is part of construction that will never end(i hope it wont before the install) and has terrible uneven pavement layers and patches and potholes.

the stock truck would get very unsettled at anything over 25MPH. the rear end would wag, and the steering wheel will turn lock to lock with the abruptness of flexing front axles and rear end squirm.(45 MPH and it feels like youve done a corkscrew on a rollercoaster) not everyone has experienced extreme steering wheel input from high speed axle articulation. I almost lost a couple fingers.

clearly this is only one of the many ride improvements ill be evaluating, but i believe it will lead to the biggest sense of overall control ive gained.

the stock goodyears would howl on this ramp and instill a sense of rear end slippage and sidewall flex, but the toyos at the same pressure have already improved the handling of this and helped the truck feel planted. GOODYEARS ARE NOT IDEAL
2018 Powerwagon
soon- Thuren King 3.0&2.5
Method NV 17
Toyo RT 35x12.5/17

User avatar
DamageWagon
1000_Posts
1000_Posts
Posts: 1604
Joined: Mon Oct 10, 2016 11:21 pm
Model Year: 2011

Re: Thuren 3.0 KING on 2018 Powerwagon!

Post by DamageWagon » Mon Feb 19, 2018 9:44 am

Rear end wag in large part is due to the rear trackbar

User avatar
MikeKey
1000_Posts
1000_Posts
Posts: 1497
Joined: Fri Mar 25, 2016 9:23 am
Model Year: 2014
Location: Idaho
Contact:

Re: Thuren 3.0 KING on 2018 Powerwagon!

Post by MikeKey » Mon Feb 19, 2018 10:16 am

Sounds like you bought the wrong vehicle.
2015 Power Wagon Laramie - Moab Tested
[Build Thread] [Instagram]

User avatar
PWJouster
Posts: 13
Joined: Wed Dec 27, 2017 7:44 am
Model Year: 2014

Re: Thuren 3.0 KING on 2018 Powerwagon!

Post by PWJouster » Mon Feb 19, 2018 10:34 am

MikeKey wrote:
Mon Feb 19, 2018 10:16 am
Sounds like you bought the wrong vehicle.
haha how so?

ive owned a myriad of different types of vehicles
2010 335i RWD tuned TT 18PSI
2013 S6 Audi tuned 600+ HP Quattro
2015 BMW x5 50i TT tuned AWD -almost at X5M capability
Multiple Wranglers
2016 Hellcat Charger
now Powerwagon


i think i know what im looking for, and unless you mean raptor vs PW debate, im good to go.

i may have explained poorly but im not sure where you assumed
2018 Powerwagon
soon- Thuren King 3.0&2.5
Method NV 17
Toyo RT 35x12.5/17

User avatar
Reloaderguy
1000_Posts
1000_Posts
Posts: 1505
Joined: Tue Feb 09, 2016 7:06 am
Model Year: 2014
Location: Central Oregon

Re: Thuren 3.0 KING on 2018 Powerwagon!

Post by Reloaderguy » Mon Feb 19, 2018 10:54 am

Rear track bar, sway bar, tires. The shocks won't change the geometry.
Best Year Power Wagon

Post Reply