Cool hidden features

[Bill2014]

Turn the key to RUN but don't start it - then follow the seatbelt steps. For the push button ignition, push the button twice without the brake pedal depressed - then follow the seatbelt steps...

[ramv]

Just not working for me. I have tried at least a dozen times now.

[NickTF]

Just not working for me. I have tried at least a dozen times now.

Describe in detail what you’re doing.

[ramv]

Truck off. Sitting in drivers seat.
Two pushes of ignition button with no foot on brake(ignition on)
Seatbelt off. Buckle, unbuckle x3
One press to off

Have tried the same starting the belt buckled and ending with it buckled. Also have tried in accessory instead of ignition.

[NickTF]

Truck off. Sitting in drivers seat.
Two pushes of ignition button with no foot on brake(ignition on)
Seatbelt off. Buckle, unbuckle x3
One press to off

Have tried the same starting the belt buckled and ending with it buckled. Also have tried in accessory instead of ignition.

Video states to begin with the belt buckled. I finished with the belt off. I'm guessing not starting with belt buckled before turning ignition to run is your issue.

[ramv]

Ok, I have tried that way too, but i'll give it another couple of shots.

Do you allow it to retract all the way? I have tried both, but hard to get three in in 10 seconds.

[NickTF]

Ok, I have tried that way too, but i'll give it another couple of shots.

Do you allow it to retract all the way? I have tried both, but hard to get three in in 10 seconds.

No, just in and out quickly without retracting.

[ramv]

Just not working. Not sure why.

[joeschmidt]

Is the trucks software version up to date? I know mine is not and I can’t get mine to work either. Curious if that’s the issue

[ramv]

Who knows? I haven't been back to an FCA dealer since I bought it. It did an auto update on the Nav etc at one point.

I will likely take it back for the recall once they get fix figured out (brake interlock). Then I will get the update done for my Procal as well (right now says adjust to 35 psi, but the light still comes on below 53 psi). Maybe they can do the seatbelt chime turnoff too.

[MJockey]

Just not working for me. I have tried at least a dozen times now.

I wasn't able to get it to work on my 2018 either but not surprised since the BCM programming has changed for 2018.

[KevinABQ]

I wasn't able to get it to work on my 2018 either but not surprised since the BCM programming has changed for 2018.

Worked for me. But I don’t have the keyless thing.

[NickTF]

Is the trucks software version up to date? I know mine is not and I can’t get mine to work either. Curious if that’s the issue

My truck is a 2015 and hasn't been in for any software updates ever. I don't think the software being up to date is required.

[MJockey]

I wasn't able to get it to work on my 2018 either but not surprised since the BCM programming has changed for 2018.

Worked for me. But I don’t have the keyless thing.

Hum, I don't have keyless entry either. I must be doing something wrong.