Rambox organization

[Bill2014]

Just because you ordered the truck doesn't absolutely mean that you need to buy it - even if it is 100% what you ordered... Just saying

But then you may need to order another one from a different dealer.

[FordyceCreekTrail]

I know I debated it at the dealer for an hour, and they kept offering me more money off the entire time...and just did not want to wait longer. Believe me settling was hard.

[Easttnrhino]

Driver side

[Easttnrhino]

Passenger side strap and tree saver under quick air in ammo box, back has clevis and receivers and snatch block and four way lug wrench and bottle jack.

[Low_Sky]

My right side pretty much looks the same, but I keep tie down straps and rope in my ammo can

[olyelr]

Easttnrhino, what netting is that on your drivers side top? The mopar rambox organizer kit I got came with two separate nets for each lid, not one big one like that.

[Easttnrhino]

That a autozone SUV cargo net that I used with zip tie mods, not perfect but 10.00. I cut my dividers out off thin plywood. thats what I used on other side to keep tool bag in place.

[olyelr]

That a autozone SUV cargo net that I used with zip tie mods, not perfect but 10.00. I cut my dividers out off thin plywood. thats what I used on other side to keep tool bag in place.

Nice.

Santa dropped me off the mopar kit. Good thing, too, because the kit is so overpriced for what you get I would have never got it otherwise. Not to mention, I literally had to trim the back drivers side flat piece to fit, and two of the dividers had to be trimmed because the lid would not shut otherwise What a crock of shit... comes straight from the car maker and still has to be modified to fit.

[TankerZak]

That a autozone SUV cargo net that I used with zip tie mods, not perfect but 10.00. I cut my dividers out off thin plywood. thats what I used on other side to keep tool bag in place.

Nice.

Santa dropped me off the mopar kit. Good thing, too, because the kit is so overpriced for what you get I would have never got it otherwise. Not to mention, I literally had to trim the back drivers side flat piece to fit, and two of the dividers had to be trimmed because the lid would not shut otherwise What a crock of shit... comes straight from the car maker and still has to be modified to fit.

The two dividers that were too tall i just didn't install. One per side. Seemed convenient to have one double long section per side for storage.

[OffroadTreks]

phpBB [video]

Clickable link for Tapatalk

I made this video awhile ago. I found that the center dividers are in fact too tall for the newer Ram Boxes that have the power lock (that always breaks). And that's the only kit they sell. Like Ram didn't even bother to update it. Dunno WTF is up with that.

The kit is kind of expensive too for what it is. But those nets are pretty invaluable. I dunno. Mixed bag.

This is how I had my old truck setup.



I keep tools and stuff on the passenger side. I keep recovery, fire extinguisher on the driver's side. And I keep the back section of the drivers usually empty. Becuase I occasionally throw stuff I buy in there from the store.

[olyelr]

Yeah, I like to keep a section open as well, which is used most often for leftovers on the ride home after dinner (keeps the stink out of the truck).

[Low_Sky]

Mikey, I like the stickers inside the box. Satisfies the urge to put stickers on stuff, without making your stuff look like it's covered in stickers, haha. You can have your cake and eat it too.