Carli Radius Arms

If it's about Power Wagons, this is where it'll go.
Post Reply
IIIOIISTER
Posts: 40
Joined: Wed Aug 23, 2017 3:37 pm
Model Year: 2014

Carli Radius Arms

Post by IIIOIISTER » Wed Nov 08, 2017 1:20 pm

Anyone here running the Carli Radius Arms for their PW? Been debating getting those and the 3" Carli front coils for my '17 PW, which current has 1/2" Thuren coils and Carli King 2.5 (used to have Thuren King 2.0). I didn't go with Thuren because of an upcoming road trip plus Carli is less than two hours away. Still waiting on a reply from Carli but I think I already know the answer.
'17 Power Wagon
Carli
-King 2.5
-3” coils
-front diff cover
Thuren
-rear track bar
-rear sway bar links
-King steering damper

User avatar
DamageWagon
1000_Posts
1000_Posts
Posts: 1496
Joined: Mon Oct 10, 2016 11:21 pm
Model Year: 2011

Re: Carli Radius Arms

Post by DamageWagon » Wed Nov 08, 2017 3:22 pm

Why do you want to run their radius arms? This is a case I would actually say that is a DOWN grade. Your stock arms will flex better than the Carli's will. There's literally zero upgrade, the stock arms are great. Get them powder coated and put some stickers on if you want bling. Or I'll sell you some weld-on radius arm reinforcements if you want them to be unique. You're literally paying only for an item to say "Carli" with those arms, unless you're just trying to get a radius arm drop, which you don't need at your height.

User avatar
MikeKey
1000_Posts
1000_Posts
Posts: 1314
Joined: Fri Mar 25, 2016 9:23 am
Model Year: 2014
Location: Boise, Idaho
Contact:

Re: Carli Radius Arms

Post by MikeKey » Wed Nov 08, 2017 3:27 pm

What Marcus said, makes zero sense to run their radius arms, not an upgrade. Their 3 inch coils are the same height as Thuren's FYI. Thuren's Hemi coils are 3 inches, he just lists them as 1 inch and 1 1/2 inch in the PW section.
2015 Power Wagon Laramie - Moab Tested
[Build Thread] [Instagram]
[Power Wagons in Moab]

Colibri
1000_Posts
1000_Posts
Posts: 1256
Joined: Mon Jun 08, 2015 3:44 pm
Model Year: 2009

Re: Carli Radius Arms

Post by Colibri » Wed Nov 08, 2017 3:33 pm

The Carli arms are beefy but don’t have provision for the power wagon articulink. You will have more roll resistance and less flex than stock. Wouldn’t recommend it.

I’ve been thinking about buying a new dually tow pig, and would consider them for that, only because I wouldn’t lift it and so would probably scrape and beat the stock arms to shit in short order towing things up and down my hill.

IIIOIISTER
Posts: 40
Joined: Wed Aug 23, 2017 3:37 pm
Model Year: 2014

Re: Carli Radius Arms

Post by IIIOIISTER » Wed Nov 08, 2017 3:44 pm

Sorry for the confusion gents I meant radius arms drops, to compensate for the taller-than-stock coils.

And yes I'm tracking that the 1/2" is actually about 2" lift over stock 2500.
'17 Power Wagon
Carli
-King 2.5
-3” coils
-front diff cover
Thuren
-rear track bar
-rear sway bar links
-King steering damper

User avatar
olyelr
2000_Posts
2000_Posts
Posts: 2399
Joined: Sun Dec 07, 2014 8:00 pm
Model Year: 2014
Location: Kewadin, MI

Re: Carli Radius Arms

Post by olyelr » Wed Nov 08, 2017 5:04 pm

MikeKey wrote:
Wed Nov 08, 2017 3:27 pm
What Marcus said, makes zero sense to run their radius arms, not an upgrade. Their 3 inch coils are the same height as Thuren's FYI. Thuren's Hemi coils are 3 inches, he just lists them as 1 inch and 1 1/2 inch in the PW section.

I thought he sells 1/2” lift coils and 1.5” lift coils, over a stock power wagon. The OP has the 1/2” ones and wants to upgrade to the 1.5” ones (thats the way i read it).

To the OP, i dont think the drop brackets are needed personally. Your only gonna be 1.5” taller than stock. All it would do is give you something else to drag on.
2016 Ram Power Wagon Laramie - Granite Crystal Metallic - Ramboxes
- A virgin, other than White Knuckle sliders... and lots of Fluid Film -

IIIOIISTER
Posts: 40
Joined: Wed Aug 23, 2017 3:37 pm
Model Year: 2014

Re: Carli Radius Arms

Post by IIIOIISTER » Wed Nov 08, 2017 5:16 pm

olyelr wrote:
Wed Nov 08, 2017 5:04 pm
MikeKey wrote:
Wed Nov 08, 2017 3:27 pm
What Marcus said, makes zero sense to run their radius arms, not an upgrade. Their 3 inch coils are the same height as Thuren's FYI. Thuren's Hemi coils are 3 inches, he just lists them as 1 inch and 1 1/2 inch in the PW section.

I thought he sells 1/2” lift coils and 1.5” lift coils, over a stock power wagon. The OP has the 1/2” ones and wants to upgrade to the 1.5” ones (thats the way i read it).

To the OP, i dont think the drop brackets are needed personally. Your only gonna be 1.5” taller than stock. All it would do is give you something else to drag on.
I agree, don't really think an extra inch and a half are going to warrant dropping the radius arms. Just curious to hear from anyone that had to actually use a radius drop for the lift.
'17 Power Wagon
Carli
-King 2.5
-3” coils
-front diff cover
Thuren
-rear track bar
-rear sway bar links
-King steering damper

User avatar
olyelr
2000_Posts
2000_Posts
Posts: 2399
Joined: Sun Dec 07, 2014 8:00 pm
Model Year: 2014
Location: Kewadin, MI

Re: Carli Radius Arms

Post by olyelr » Wed Nov 08, 2017 8:54 pm

If you are looking for a performance upgrade, as far as off road goes, I have a feeling a 4 link setup like this http://www.pure-performance.biz/product-p/pp05712.htm would work better than the factory radius arm setup. May not be as good for on road, though... Im not sure.
2016 Ram Power Wagon Laramie - Granite Crystal Metallic - Ramboxes
- A virgin, other than White Knuckle sliders... and lots of Fluid Film -

IIIOIISTER
Posts: 40
Joined: Wed Aug 23, 2017 3:37 pm
Model Year: 2014

Re: Carli Radius Arms

Post by IIIOIISTER » Sat Nov 11, 2017 7:48 am

Just installed the Carli 3” front coils. Despite what the trolls have been claiming in the past, radius arms geometry changes ARE definitely necessary as there is a bowl in the coils as a result of sharply angled coil buckets.

Does anyone here ACTUALLY have the Carli 3” installed? The Carli 3” is not the same height as the Thuren 3” (or 1-1/2” for PW). Here’s a direct quote from Don when I asked him if there is a difference between Carli’s and his coil springs:

“Yes mine are about 3/4" shorter at ride height. Carlis coils lift the truck 3.5" or so, and mine are 2.75" lift.”

I’d really appreciate it if some one that owns the 3” Carli would step forward and share his experience in terms of what other components were necessary to run those coils properly.

@MikeyKey, buddy you honestly don’t think I read the fine prints before I purchased my 1/2” from Thuren? What coils are you currently running that makes you so confident that you don’t need any changes to the radius arms to run the 3” Carli properly? I’d love to see your perfectly straight coils sitting on a “stock” PW with no mods to the radius whatsoever.
'17 Power Wagon
Carli
-King 2.5
-3” coils
-front diff cover
Thuren
-rear track bar
-rear sway bar links
-King steering damper

User avatar
DamageWagon
1000_Posts
1000_Posts
Posts: 1496
Joined: Mon Oct 10, 2016 11:21 pm
Model Year: 2011

Re: Carli Radius Arms

Post by DamageWagon » Sat Nov 11, 2017 10:40 am

I've never heard someone running a 3" kit need new radius arms. Ever. I've only seen guys get new arms for the 5"+ kits. Was it Dan or Radio that told you you HAVE to spend tons more money with them or your truck will fall to pieces in the middle of the road?

User avatar
olyelr
2000_Posts
2000_Posts
Posts: 2399
Joined: Sun Dec 07, 2014 8:00 pm
Model Year: 2014
Location: Kewadin, MI

Re: Carli Radius Arms

Post by olyelr » Sat Nov 11, 2017 10:44 am

The stock coils bow on all ram 2500s with the radius arms. Including the power wagons.

Check out reloaderguys build thread. He has a good picture of the stock coils bowing like a boomerang.
2016 Ram Power Wagon Laramie - Granite Crystal Metallic - Ramboxes
- A virgin, other than White Knuckle sliders... and lots of Fluid Film -

User avatar
MikeKey
1000_Posts
1000_Posts
Posts: 1314
Joined: Fri Mar 25, 2016 9:23 am
Model Year: 2014
Location: Boise, Idaho
Contact:

Re: Carli Radius Arms

Post by MikeKey » Sat Nov 11, 2017 2:04 pm

IIIOIISTER wrote:
Sat Nov 11, 2017 7:48 am
Just installed the Carli 3” front coils. Despite what the trolls have been claiming in the past, radius arms geometry changes ARE definitely necessary as there is a bowl in the coils as a result of sharply angled coil buckets.
Are you now calling us all trolls?
IIIOIISTER wrote:
Sat Nov 11, 2017 7:48 am
Here’s a direct quote from Don when I asked him if there is a difference between Carli’s and his coil springs:

“Yes mine are about 3/4" shorter at ride height. Carlis coils lift the truck 3.5" or so, and mine are 2.75" lift.”
Ok, guess I was wrong, I was falsely under the impression they were the same. That's a sizable difference to boot.

IIIOIISTER wrote:
Sat Nov 11, 2017 7:48 am
@MikeyKey, buddy you honestly don’t think I read the fine prints before I purchased my 1/2” from Thuren? What coils are you currently running that makes you so confident that you don’t need any changes to the radius arms to run the 3” Carli properly? I’d love to see your perfectly straight coils sitting on a “stock” PW with no mods to the radius whatsoever.
:roll: Whose just randomly buying things here? Cough Cough King 2.0's.


Here is Reloaderguy's first from his own thread

http://forum.powerwagonregistry.org/vie ... =13&t=3845
Here are how the factory coils look brand new.
Image
Thuren Gas Coils 1 1/2
Image
What is that?

Believe it or not, I seem to have not taken a photo. But I have Thuren's 1 1/2 inch coils on my truck, DamageWagon watched me install them. Most of my photos are of me actually wheeling my truck. :popcorn:



But you're the expert, so why are you asking questions? Just buy Carli's radius arms already. We're all stupid. I'm a troll. I have no further input for ya. Sorry for offering any input at all. :run:
2015 Power Wagon Laramie - Moab Tested
[Build Thread] [Instagram]
[Power Wagons in Moab]

User avatar
nts007
2000_Posts
2000_Posts
Posts: 2170
Joined: Wed Dec 11, 2013 9:01 pm
Model Year: 2008
Location: Sask, Canada, Earth

Re: Carli Radius Arms

Post by nts007 » Sat Nov 11, 2017 2:35 pm

I found carli 3" coils on my truck were only 1.75" gain over stock. The Thuren's were just shy of the 3" advertised. I have another set of carli coils not installed that are 3". Who knows. Maybe they will be closer to 3" for someone and much farther for another.
A lot of aftermarket parts seem to act differently for different trucks. It's weird. Just when we think we got it nailed down someone comes out with a must have part and an expert on trolls has to make a big deal about it. We witnessed reloderguy being a first adopter on the wagon with thuren coils. And many of us have an excellent understanding on how suspension link points and pivots work. Not ragging on ya just chill
08 ctd--mini max--thuren 3" coils and shackles--4.56 gears and lockers in pw axles--some lights--afe intake system--bd super b turbo--Banks w/m Injection--Dynatrac Balljoints--king 2.5"s--37" Nitto trail grapplers--DOR Long arms--Custom emf track bar--Manual T-case swap--Full PW Under armor--PSC Hydro Assist

ramv
250_Posts
250_Posts
Posts: 346
Joined: Wed Feb 24, 2016 9:36 am

Re: Carli Radius Arms

Post by ramv » Mon Nov 13, 2017 9:55 pm

On my second gen, I am running 7" Skyjacker coils with stock four link lower brackets. Uppers are from a Skyjacker 5" kit. Lower links are custom, uppers are from the Skyjacker 5". Obviously all the sideways stuff (steering, trackbar etc is Thuren.)

My thought is the stock mounts keep the control arms out of the rocks better than drops/long arms. I destroyed the Skyjacker and stock lowers on rocks, so had to build stronger lowers. I can't imagine I would want to drop them. On the 4.5 gens with the super long radius arms, I can't see how a drop on the arm helps with anything other than perhaps the spring angle. It's just going to hinder off road performance.

Edit:
Should have read this thread more. It's hilarious. 3/4" of an inch? Stock options, wear and tear, fuel versus empty, winch/no winch, snow plow, etc will make more difference. Drop brackets for a tiny lift will only hurt performance.

I personally wouldn't consider any drop brackets unless the lift was 6" or more.

Post Reply