Board index General Power Wagon Talk

If it's about Power Wagons, this is where it'll go.

Hypertech

Postby Z's2016PW » Thu Jul 13, 2017 6:46 pm

Okay, I just received my Hypertech speedometer calibrator. Install was extremely easy. Haven't had a chance to verify the speedo yet, but I will within the next couple of days. The nice thing about this piece of equipment is if Hypertech ever comes out with a tune for our engine it can be upgraded to the max energy. Before I forget the part number for our trucks is 752501.
Attachments
IMG_0212.JPG
Z's2016PW
50_Posts
 
Posts: 82
Joined: Sat Nov 21, 2015 11:41 pm
Location: Colorado Rocky Mountains

Re: Hypertech

Postby Z's2016PW » Fri Jul 14, 2017 12:23 pm

Had a chance to drive the Wagon today. It feels like stock again. Throttle response is normal and so is the downhill speed holding. Transmission seems to be shifting smoother. Overall I would say that this is a very worthwhile mod. I don't think it matters which brand of tuner you go with just do it!
Z's2016PW
50_Posts
 
Posts: 82
Joined: Sat Nov 21, 2015 11:41 pm
Location: Colorado Rocky Mountains

Re: Hypertech

Postby coder » Fri Jul 14, 2017 7:59 pm

It definitely helps with drivability for sure. A good test to see if it's dialed-in correctly is to get a free GPS Speedometer app on your phone, take a drive and compare it to you truck at a steady 65 MPH it should be within 1 MPH I actually had to adjust mine a couple times to get is to match.
Vehicle: 2007 Power Wagon Quad Cab - Inferno Red
Suspension: Carli 3" Hemi Coils, Carli Control Arms, Carli King 2.5 Pin-Tops, Carli Stainless Steering Stabilizer, Carli Trackbar | Synergy 1" Rear Shackle
Performance: Magnaflow Muffler | Magnaflow Y-Pipe
Wheels/Tires: Toyo AT II's 35x12.5x17
Steering/Drivetrain/Axles: Carli Front Diff Guard | Dynatrac Ball Joints | Mopar HD Steering Gear
Miscellaneous: Line-X Bedliner | Locker Bypass Switch | Mopar Rock Rails | DieHard Platinum Battery G65 | Performance Friction Brake Pads | Weathertech Digital Fit Mats | Winch Thermal Protection Bypass
User avatar
coder
1000_Posts
 
Posts: 1132
Joined: Wed Jun 06, 2012 3:18 pm
Location: Ladera Ranch, CA

Re: Hypertech

Postby Chromolykid » Sat Jul 15, 2017 2:16 pm

Are these a one shot per VIN deal or could I buy a used one? Ebay has some for $50 occasionally.
User avatar
Chromolykid
50_Posts
 
Posts: 137
Joined: Sun Oct 25, 2015 9:05 pm
Location: Los Angeles, CA

Re: Hypertech

Postby Z's2016PW » Sat Jul 15, 2017 6:56 pm

I did not have to put the vin in so it is possible that you could buy a used one for your wagon.
Z's2016PW
50_Posts
 
Posts: 82
Joined: Sat Nov 21, 2015 11:41 pm
Location: Colorado Rocky Mountains

Re: Hypertech

Postby Z's2016PW » Sat Jul 15, 2017 6:59 pm

The other nice thing about this calibrator is that it will read and clear dtc's.
Z's2016PW
50_Posts
 
Posts: 82
Joined: Sat Nov 21, 2015 11:41 pm
Location: Colorado Rocky Mountains

Re: Hypertech

Postby coder » Sun Jul 16, 2017 6:18 pm

I believe it automatically reads the VIN from computer during the first use and locks it, but I have never tested it.
Vehicle: 2007 Power Wagon Quad Cab - Inferno Red
Suspension: Carli 3" Hemi Coils, Carli Control Arms, Carli King 2.5 Pin-Tops, Carli Stainless Steering Stabilizer, Carli Trackbar | Synergy 1" Rear Shackle
Performance: Magnaflow Muffler | Magnaflow Y-Pipe
Wheels/Tires: Toyo AT II's 35x12.5x17
Steering/Drivetrain/Axles: Carli Front Diff Guard | Dynatrac Ball Joints | Mopar HD Steering Gear
Miscellaneous: Line-X Bedliner | Locker Bypass Switch | Mopar Rock Rails | DieHard Platinum Battery G65 | Performance Friction Brake Pads | Weathertech Digital Fit Mats | Winch Thermal Protection Bypass
User avatar
coder
1000_Posts
 
Posts: 1132
Joined: Wed Jun 06, 2012 3:18 pm
Location: Ladera Ranch, CA

Re: Hypertech

Postby Timgco » Mon Jul 17, 2017 11:40 pm

These do vin lock. You can switch vehicles, but do have to pull the settings back out and out back to stock.
2016 Laramie Power Wagon
...www.idontworkforaev.com...
Timgco
50_Posts
 
Posts: 101
Joined: Tue Oct 14, 2014 4:41 pm


Return to Power Wagon Talk

Who is online

Users browsing this forum: Bing [Bot], Chubbs, powerwagon77 and 3 guests