Board index General Power Wagon Talk

If it's about Power Wagons, this is where it'll go.

2013 PW with 2" Mopar level, and 35x12.50?

Postby Cdhetzel » Tue Jul 04, 2017 4:54 am

What's up everyone?! Ok, so I have a 2013 wagon that is bone stock, at the moment. I just ordered the 2" level from Mopar and was wondering if I could get 35x12.50s on it without rubbing. I know the rim has a lot to do with it based off of searching but what would a good backspace be? Thanks for any and all information guys!

Deano
Cdhetzel
 
Posts: 2
Joined: Tue Jul 04, 2017 4:47 am

Re: 2013 PW with 2" Mopar level, and 35x12.50?

Postby olyelr » Tue Jul 04, 2017 8:16 am

You dont need a leveling kit at all to fit 35s, they fit stock. With the stock wheels you will most likely get a little rub on the control arms. No biggy.
2016 Ram Power Wagon Laramie - Granite Crystal Metallic - Ramboxes
- A virgin, other than White Knuckle sliders... and lots of Fluid Film -
User avatar
olyelr
2000_Posts
 
Posts: 2220
Joined: Sun Dec 07, 2014 8:00 pm
Location: Kewadin, MI

Re: 2013 PW with 2" Mopar level, and 35x12.50?

Postby DamageWagon » Tue Jul 04, 2017 12:05 pm

This is covered on Thurens website, under the tech section, tire fitment. Check that out. You would benefit from new control arms, otherwise expect a little rub and maybe a slight decrease in turning radius. Rear axle is no problem. I didn't even know Mopar made a leveling kit. It fits the Wagons?
User avatar
DamageWagon
1000_Posts
 
Posts: 1326
Joined: Mon Oct 10, 2016 11:21 pm

Re: 2013 PW with 2" Mopar level, and 35x12.50?

Postby Stickman » Tue Jul 04, 2017 5:49 pm

I've got a '12 with the Mopar 2" level and I'm clearing 37x12.5x20s on 20x9 -12mm offset rims and only had to trim the rear of the front fenders (pinch weld, innner fender, fender flare) 35s shouldn't be an issue.
Live To Ride, Ride To Live

2012 Ram Power Wagon - Check out my build thread to see my mods! viewtopic.php?f=13&t=2187
User avatar
Stickman
500_Posts
 
Posts: 833
Joined: Sun Nov 17, 2013 11:02 pm
Location: Wayland, MO

Re: 2013 PW with 2" Mopar level, and 35x12.50?

Postby Cdhetzel » Mon Jul 17, 2017 11:03 am

Well, I should have it all installed tomorrow, so I will let you know how it works out and post pics of how she looks!
Cdhetzel
 
Posts: 2
Joined: Tue Jul 04, 2017 4:47 am


Return to Power Wagon Talk

Who is online

Users browsing this forum: Bing [Bot], Google [Bot] and 4 guests