Back in the fold

If it's about Power Wagons, this is where it'll go.
Post Reply
User avatar
Calvinm119
50_Posts
50_Posts
Posts: 182
Joined: Sat Jul 21, 2012 1:43 pm

Back in the fold

Post by Calvinm119 » Sun Apr 16, 2017 10:02 am

Its been a while, but I'm back and boy does it feel good!

While helping one of my co-workers try to find a new Ram HD truck, I stumbled across this beauty. While I wasn't in the market for a new truck, I couldn't pass on this opportunity to own a PW again. She's the same color as my old PW (Brilliant Black) and its awesome to say the least. The dealer actually had 7 PWs on their lot and they were all pretty reasonably priced. 4 were the tradesman version and 3 standard PWs. I opted for the Black Tradesman Version because I love the subdued look. The mods will start soon. The great thing about have a REG 2500 is that I can transfer over some of my mods to this new truck. I've got a K&N CAI that will be going in today or tomorrow. I'm looking for a throaty and moderately load muffler. I may do steering wheel controls but a Line-X bed is in my future.

So here are some comparisons that I have coming from a 5th Gen Standard 2500 w/6.4 vs a 5th Gen PW:

Ride Quality

In terms of ride quality, the difference is night and day. While the rear coil springs on the 2015 2500 were a lot softer than leaf springs, but this new PW runs circles around a normal 2500. On the way to the dealership, the freeway roads were incredibly rough and in the 2500 you felt every bump. The PW took those same roads much easier. You felt the larger bumps, but I didn't even notice the smaller ones. Also, you really notice the 2 inch ride height increase. I haven't noticed a large difference in fuel economy, but I have noticed that the PW stays in "ECO" mode more than regular 2500 did. I

4.10 gears vs 3.73 gears

3.73 gears made my previous truck feel like it couldn't get out of its own way at lower rpms (1500-1900). Don't get me wrong, the truck moved when I put pedal to the floor, but a times the 6.4 just felt bogged down. Now I know the 6.4 makes its power in the higher RPM bands, but between the lower(numerically) gears made the 66rfe shift a lot. On flat highway roads, it did very well. On longer trips, it could manage between 17-19 mpgs hand calculated. But I live about 25 minutes from my job and the roads are mostly hilly two lane country roads (55 MPH speed limit).

4.10 gears feel much better. Acceleration was better (obviously) and the truck doesn't bog nearly as much comparatively speaking. Time will tell how this compares to the 3.73 gears, but it seemed to take the back country hills much better. Highway driving was nice as well. The 4.10s allowed the 6.4 and 66rfe to hold the MDS mode with relative ease.

Other odds and ends:

The PW has a floor shifting transfer case vs the electronic version on the 2500. Even though everything is CPU controlled and it probably doesn't make a difference, I find this version to be superior.

The PW has the 3.0 Uconnect vs the 2500's 5.0 Uconnect. The 5.0 was a touch screen with a larger screen vs the small button controlled 3.0. Although it is a minor change/inconvenience, it still a change that needs to be noted. I can still utilize Sirius XM radio which is a major plus. Everything else is pretty much the same.

The PW has a rearview parking camera. This is a nice upgrade and I was looking to install one in the 2500 at some point. It shows up in the rearview mirror but still functions like any other one that I have seen.

The biggest change is the Rambox. The 2500 had the Rambox where as the Tradesman PW is not available with it. I personally never really used the Rambox as much as some people. It was great for grocery shopping, storing straps, or putting things up for safe keeping that I didn't necessarily want in the cab, but I honestly don't think the benefit is worth the loss of space in the bed. Plus I noticed that the boxes never truly lined up with the bed. Maybe its just me being OCD, but I didn't like that small flaw.

Everything else is pretty much the same but its funny how the PW just has a much more aggressive look to it when compared to a similarly equipped 2500. It just looks bad ass! I have to say the 2500 just felt like a truck where as the PW feels better!

Anyway, here's some pics of both. Its good to be back and look forward to posting in here more often! ABN! :patriot: :winchmob:
Attachments
IMG_2098.jpg
IMG_0048.JPG
IMG_0052.JPG
IMG_2100-2.JPG
Last edited by Calvinm119 on Sun Apr 16, 2017 1:05 pm, edited 1 time in total.
2017 Ram Power Wagon Tradesman:
Mods so far: K&N CAI, Weathertech floor mats, resonator delete, RBP Powder Coated Tip, Dodge Off Road Steering Box Brace

Gone but never forgotten:

2015 Ram 2500 Blue Streak Pearl: Tradesman w/ 6.4L Hemi, Rambox, electronic transfer case, 3.73s, LSD, BLD, Chrome appearance package, tailgate extender.
Mods so far- Mopar clearance Lights, Linex in bed, K&N CAI, Weathertech floor mats

2006 Dodge Ram Power Wagon

hammer40
50_Posts
50_Posts
Posts: 74
Joined: Thu Oct 23, 2014 11:51 am
Model Year: 2014
Location: Vashon Island, WA

Re: Back in the fold

Post by hammer40 » Sun Apr 16, 2017 10:07 am

Congrats! Let the mods begin.
2014 PW - Amp boards / Shorty antenna / Front tint / Roll-X bed cover / 35" BFG's on Black Rhino Tanneys +12 Offset / Truxxx 1.5

User avatar
coder
1000_Posts
1000_Posts
Posts: 1144
Joined: Wed Jun 06, 2012 3:18 pm
Model Year: 2007
Location: Ladera Ranch, CA

Re: Back in the fold

Post by coder » Sun Apr 16, 2017 10:46 pm

Nice truck, congrats...
Vehicle: 2007 Power Wagon Quad Cab - Inferno Red
Suspension: Carli 3" Hemi Coils, Carli Control Arms, Carli King 2.5 Pin-Tops, Carli Stainless Steering Stabilizer, Carli Trackbar | Synergy 1" Rear Shackle
Performance: Magnaflow Muffler | Magnaflow Y-Pipe
Wheels/Tires: Toyo AT II's 35x12.5x17
Steering/Drivetrain/Axles: Carli Front Diff Guard | Dynatrac Ball Joints | Mopar HD Steering Gear
Miscellaneous: Line-X Bedliner | Locker Bypass Switch | Mopar Rock Rails | DieHard Platinum Battery G65 | Performance Friction Brake Pads | Weathertech Digital Fit Mats | Winch Thermal Protection Bypass

User avatar
yooper68
50_Posts
50_Posts
Posts: 113
Joined: Tue Nov 18, 2014 7:20 am
Location: UP Michigan

Re: Back in the fold

Post by yooper68 » Mon Apr 17, 2017 5:40 am

Enjoy your new truck!

Thanks for the write-up & comparison.
Trucks: 2003 4x4 Dodge 3/4 ton, 1972 4x4 Ford 3/4 ton (factory hi-boy), shopping for new Power Wagon (or may wait for 2020 model? - 75th year special edition?)

User avatar
w2dodge
500_Posts
500_Posts
Posts: 847
Joined: Mon May 21, 2012 2:57 pm
Location: nj..ny

Re: Back in the fold

Post by w2dodge » Mon Apr 17, 2017 5:56 am

congrats...

User avatar
MikeKey
1000_Posts
1000_Posts
Posts: 1268
Joined: Fri Mar 25, 2016 9:23 am
Model Year: 2014
Location: Boise, Idaho
Contact:

Re: Back in the fold

Post by MikeKey » Mon Apr 17, 2017 7:33 am

Nice, congrats.
2015 Power Wagon Laramie - Moab Tested
[Build Thread] [Instagram]
[Power Wagons in Moab]

rkgzx9leftcoast
50_Posts
50_Posts
Posts: 220
Joined: Mon Oct 10, 2016 9:38 am
Model Year: 2014
Location: Mesa Arizona

Re: Back in the fold

Post by rkgzx9leftcoast » Mon Apr 17, 2017 9:15 am

Congrats! Nice Truck
2016 Tradesman White, adding mods now, 37 Ridge Grapplers on Method Standards 17 x 8.5 x 5.75 BS, Thuren Overland front 1.5" Kit. SLT Grill, Mopar Steps. More Thuren stuff soon....

TwinStick
2000_Posts
2000_Posts
Posts: 3744
Joined: Mon May 28, 2012 5:58 pm
Model Year: 2008

Re: Back in the fold

Post by TwinStick » Mon Apr 17, 2017 5:18 pm

Welcome back. Nice truck. Congrats ! :rockon:
2008 Red QC PW G56. No lift yet, stock size tires. It pulls a 2016 Starcraft AR One Extreme, 3500 lbs.
Load Pro 35 helper springs. 2015 A.R.E. MX Series custom cap. PCP front diff cover protector. Mag-Hytec 6 qt rear diff cover. K&N replacement air filter only. Dual grounded throttle body. Winch TPC bypass. Fab Four rear bumper. DURA BAK lined rocker protection. And a bunch of new front end stuff.

G-56 Gear ratios: 1st) 6.29:1 2nd) 3.48:1 3rd) 2.10:1 4th) 1.38:1 5th) 1.0:1 6th) 0.79:1 Rev 6.29:1 --- = 78.01613:1 Crawl Ratio
-------------------------5.94:1--------3.28:1-------1.98:1-------1.31:1-------1.0:1-------0.74:1-----5.42:1 ---- = 73.675:1
545RFE----------------3.0:1---------1.67:1--------1.0:1--------0.75:1-------0.67:1------------------3.0:1 -------=37.21:1

2013+ 32.47 crawl ratio...............Can you see the trend ??????????????

Mule007
50_Posts
50_Posts
Posts: 53
Joined: Mon May 16, 2016 7:27 pm
Location: Colton, Oregon

Re: Back in the fold

Post by Mule007 » Mon Apr 17, 2017 7:49 pm

Nice truck; and thank you for the comparison notes,,,,Enjoy !!
2005 Mineral Gray PW; Alloquin 3" rock rails w/low profile steps; 2.5" Skyjacker suspension lift kit; Toyo Open Country AT II Extreme-35 x 12.5 x 17 10 ply's; McQuay-Norris Extreme ball joints; T-steering upgrade w/Bilstein 5100 steering damper; Bilstein 5100 Mono tube nitrogen gas shocks; Denso 180 amp alternator, Interstate Mega-tron 850 CCA HD battery; MoPar rear wheel well liners, black accent fender flares, remote start, and Ravelco Anti theft device; Hopkins Trailer Mate trailer brake controller; Hemi 1 ton transmission cooler; Uniden Bearcat Pro 68XL CB radio; Linex Platinum black armor truck bed & lower rock panel armor coating; Matching Range Rider cab high fiberglass canopy; 2" Linex (matches Alloquin) round brush guard light bar w/ 4- KC HiLites Rally 400 Series 4" Halogen Driving/off road lights; Dyna-flow cat back dual exhaust; GT Platinum srt-10 A-pillar pod mount programmable performance chip, monitor, tuner; an S&B CAI.

User avatar
FirerescuePW
1000_Posts
1000_Posts
Posts: 1565
Joined: Sun May 20, 2012 10:51 am
Location: North Wales, PA

Re: Back in the fold

Post by FirerescuePW » Mon Apr 17, 2017 9:45 pm

Welcome back!

Sent from my SM-G935P using Tapatalk
'05 Mineral Gray Power Wagon QC #1005

WINCH MOB PROUD!

SuperChips FlashPaq; DT ProFab Steering Brace; 08.5 Steering linkage (twice); Toyo Open Country M/T 35/12.50x17; Carli front diff guard; Rockcrusher rear diff cover; White Knuckle Offroad Rock Rails; Carli 3"coils, track bar, and High Clearance Control Arms; Carli King 2.5" Remote Resi Shocks; Reflex spray-in liner; Extang Trifecta tonneau cover; Pop Lock electric tailgate lock (OOS); Tekonsha Prodigy brake control; LEDS & Strobes & Siren; Winch TPS Bypass; Warn Wireless Remote; Dog hair, and a BIG Wish List!

User avatar
adeluca73
2000_Posts
2000_Posts
Posts: 2020
Joined: Mon May 19, 2014 9:56 pm
Model Year: 2014
Location: The Pentagon, VA

Re: Back in the fold

Post by adeluca73 » Tue Apr 18, 2017 11:31 am

haha "not in the market".... :mrgreen:
2014 Ram PW SLT: Two tone Flame Red & Black
Completed Mods: Ram door sill guards, Front air deflector, WeatherTech slimline window deflectors, DiamondBack HD cover coated w/ Line-X, Mufflex MagnaFlow muffler & Resonator delete, Opti-Coat Pro 2.0, DeeZee tailgate strut, DeeZee ¼" fitted bed mat, Factor-55: FlatLink winch hook/Shorty Strap 3.0/Hitchlink 2.5, Warn Wireless Winch Remote, Locker by-pass, AEM dry filter, Truxedo LED bed lights wired into RamBox Connector, WhiteKnuckle sliders w/ full-length diamond plate coated in Line-X, Purple Cranium rear diff guard, AEV front/rear diff cover, AEV RAI w/ pre-filter, AEV ProCal (Bootleg'd), DOR Steering Box Brace, Phillips Hi intensity LEDs in cargo lamps & back-ups, triple anti-hop shocks, Truxx PW specific front 1.5" level, AAM 4.88's, custom black-out work, Line-X front/rear bumpers & wheel flares, 37" Nitto Ridge Grapplers, Plasti-dip PW wheels Black w/ Gunmetal metalizer, FilterMag kit, AMP Research BedStep
Next Mods: Thuren: {Coils, Track Bar, Boggie Bumps, King 2.5's shocks} , on-board air, HID low CANBUS replacement, LED HI, BD LED fogs

User avatar
fbenross
500_Posts
500_Posts
Posts: 590
Joined: Thu May 24, 2012 6:35 pm
Location: Moss Beach CA

Re: Back in the fold

Post by fbenross » Thu Apr 20, 2017 12:00 am

:rockon:
Ben CW3 2/10th AIR CAV FT ORD CA. (retired)
2006 Power Wagon-6spd, rear air bags, Diff Guards:Carli F. RockCrusher R., matching rim for spare tire, removed back seat for storage----I own the following: 2005 Hallmark pop-top Camper---1970 Scout 800 4x4 w/232ci 6cyl 4spd---2006 Yamaha XT225 Dual Sport---Pictures @ https://www.flickr.com/photos/powerwagon/collections

Post Reply