Frames

If it's about Power Wagons, this is where it'll go.
Post Reply
waldo
250_Posts
250_Posts
Posts: 297
Joined: Sat Dec 26, 2015 6:46 am
Model Year: 2007

Frames

Post by waldo » Sun Mar 19, 2017 6:18 am

I keep reading here and there that the PW has a different frame, but I've also read where it has the same frame as the 2500HD.

Other than some holes and weldments for skid plates and such, what's the truth?
2007 and 2016 Power Wagons

ramv
250_Posts
250_Posts
Posts: 411
Joined: Wed Feb 24, 2016 9:36 am

Re: Frames

Post by ramv » Sun Mar 19, 2017 8:52 am

Has to be generally the same frame. I would guess it would have a different part number due to some slightly different hole etc, but I bet either would work for either application with minor modifications. (2500 to Power Wagon). IE, I am sure a Cummins, G56, etc would be a bolt in, except for anything obvious (cutting the floorpan for the transmission shifter, winch interferes with intercooler).

Just a pure guess, but the economics wouldn't work for Daimler if they had to do a create new frame.
2016 Power Wagon; White Knuckle sliders, 315 BFGs, BD 2Lo Kit, AEV ProCal, Airbags/Daystars

User avatar
olyelr
2000_Posts
2000_Posts
Posts: 2922
Joined: Sun Dec 07, 2014 8:00 pm
Model Year: 2014
Location: Kewadin, MI

Re: Frames

Post by olyelr » Sun Mar 19, 2017 9:49 am

And, what would be the point of creating a new/different frame? They would essentially end up being the same in the end.
2016 Ram Power Wagon Laramie - Granite Crystal Metallic - Ramboxes :patriot:

User avatar
DamageWagon
1000_Posts
1000_Posts
Posts: 1769
Joined: Mon Oct 10, 2016 11:21 pm
Model Year: 2011

Re: Frames

Post by DamageWagon » Sun Mar 19, 2017 10:12 am

They are the same frame. You are correct, the only differences are maybe a few holes and skid plate mounts.


Sent from my safe space

User avatar
MikeKey
1000_Posts
1000_Posts
Posts: 1779
Joined: Fri Mar 25, 2016 9:23 am
Model Year: 2014
Location: Nomadic
Contact:

Re: Frames

Post by MikeKey » Sun Mar 19, 2017 1:24 pm

I thought I read on this very site that it was the same, but had additional re-enforcement.
2015 Power Wagon Laramie - "ROCKLANDER"
[Build Thread] [Instagram] [Youtube]

User avatar
Low_Sky
500_Posts
500_Posts
Posts: 586
Joined: Fri May 01, 2015 5:12 pm
Model Year: 2014
Location: Eagle River, Alaska

Re: Frames

Post by Low_Sky » Sun Mar 19, 2017 3:28 pm

A few different holes and weldments, but I'm sure the structural members are the same as for a normal Hemi or Cummins 2500 crew 6'4" box. For example, the front track bar frame side mount is different, and that is a weldment.


Sent from my iPhone using Tapatalk
John
Alaska
2015 PW Laramie w/RamBox, 35"x12.50r17 Toyo C/Ts, custom rock sliders, PCP front/rear half-spiders, DOR steering brace, drinks Amsoil Kool-Aid, custom offroad pinstripes and extreme mud splash graphics

User avatar
Reloaderguy
1000_Posts
1000_Posts
Posts: 1720
Joined: Tue Feb 09, 2016 7:06 am
Model Year: 2014
Location: Central Oregon

Re: Frames

Post by Reloaderguy » Sun Mar 19, 2017 3:55 pm

It's a half ton frame, that's why the capacity is so low.
Best Year Power Wagon

User avatar
olyelr
2000_Posts
2000_Posts
Posts: 2922
Joined: Sun Dec 07, 2014 8:00 pm
Model Year: 2014
Location: Kewadin, MI

Re: Frames

Post by olyelr » Sun Mar 19, 2017 5:13 pm

........
Attachments
IMG_4832.JPG
2016 Ram Power Wagon Laramie - Granite Crystal Metallic - Ramboxes :patriot:

User avatar
nts007
2000_Posts
2000_Posts
Posts: 2271
Joined: Wed Dec 11, 2013 9:01 pm
Model Year: 2008
Location: Sask, Canada, Earth

Re: Frames

Post by nts007 » Sun Mar 19, 2017 5:29 pm

Frame was identical to the 2500 in all the 3rd gens. Had different part numbers for mounting points for additional protection and accessories. I have one in my yard here.
08 ctd--mini max--thuren 3" coils and LT Leaves--4.56 gears and lockers in pw axles--some lights--afe intake system--bd super b turbo--Banks w/m Injection--Dynatrac Balljoints--king 2.5"s--37" Hankook Dynapro MT--DOR Long arms--Custom emf track bar--Manual T-case swap--Full PW Under armor--PSC Hydro Assist and so much more

RustyPW
2000_Posts
2000_Posts
Posts: 3784
Joined: Thu May 24, 2012 2:23 pm
Model Year: 2008
Location: Brownsville Pa.

Re: Frames

Post by RustyPW » Sun Mar 19, 2017 7:16 pm

nts007 wrote:Frame was identical to the 2500 in all the 3rd gens. Had different part numbers for mounting points for additional protection and accessories. I have one in my yard here.
2X
PWOC #53
2008 POWER WAGON RC
Mods to the PW; Nerffed Mopar RockRails, Wheel Well Liners, Bushwacker Pocket Fender Flairs, Garvmin dezl 560LMT GPS, Power Wagon Winch Kit, Line X Ultra Bed Liner, PIAA Headlight Bulbs, PIAA 580 Driving Lights (135 watt), PIAA 520 Fog Lights (135 watt), PIAA 520 ATP Off-Road Lights (135 watt), Locker Bypass, Modifed Rockcrusher Diff Covers, Mopar Utility Bed Rails and Tool Box, Warn Winch Wireless Remote Control, "el-cheapo" Inclinometer, Airaid CAI, Winch TPS Bypass, 35" Toyo's, Mopar Spare Tire Lock, 'T' Steering Linkage, Modifed PSC Steering Brace, P3 Brake Controller, Modifed Fusion "mall crawler" rear bumper , PIAA 1500 Back-Up Lights, 1Ton HEMI Tranny Cooler, Leer 100XR Bed Cap, Factory Tow Mirrors, CenterLine Rims 17x9-5.25 BS, Mag-Hytec Tranny Pan, AutoMeter Gauges, PSC Extreme Hydro Assist Steering, Carli Track Bar, Carli Ball-Joints, Dynatrac FreeSpin Hubs, Snorkel, RCV Axles, EBC Pads & Rotors, Aluminess Front Bumper, BIG Pul-Pal, 60" Extreme Hi-lift Jack, and more riggin' equipment, Carli Long Travel Air Bags, Bilstein 7100 Shocks - Carli Valving, MORE STUFF COMIN'.

Moab '10, '12, '14.
Rausch Creek Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17,
Russ NRA Benefactor Member

User avatar
adeluca73
2000_Posts
2000_Posts
Posts: 2108
Joined: Mon May 19, 2014 9:56 pm
Model Year: 2014
Location: The Pentagon, VA

Re: Frames

Post by adeluca73 » Mon Mar 20, 2017 7:45 am

It's a 2500HD base frame.
2014 Ram PW SLT: 1st year of the Best Gen
<Build Thread>

User avatar
Bill2014
500_Posts
500_Posts
Posts: 765
Joined: Fri May 09, 2014 7:03 pm
Model Year: 2014
Location: Northern NY

Re: Frames

Post by Bill2014 » Mon Mar 20, 2017 7:57 am

This is one of the pictures I took of the 2014 PW frame sticker when the truck was brand new...Image


Sent from my iPhone using Tapatalk
2014 Power Wagon Laramie
Titan V5 2.5" Receiver Pintle Hook
Warn wireless winch controller
.188" DOM White Knuckle Rock Sliders
Locker Bypass

Moab 2006

TwinStick
2000_Posts
2000_Posts
Posts: 4028
Joined: Mon May 28, 2012 5:58 pm
Model Year: 2008

Re: Frames

Post by TwinStick » Mon Mar 20, 2017 10:52 am

They are the same for all intents & purposes. But they used to have different part #'s technically speaking. Not sure on the 2017's. Like the others have said, same frame, just some added/different holes for all the Power Wagon goodies. No big mystery here. :lol:
In WNY State. 2008 Red QC PW G56. No lift yet, stock size tires. It pulls an 18' 2016 Starcraft AR One Extreme, 3500 lbs.
Load Pro 35 helper springs. 2015 A.R.E. MX Series custom cap. PCP front diff cover protector. Mag-Hytec 6 qt rear diff cover. K&N replacement air filter only. Dual grounded throttle body. Winch TPC bypass. Fab Four rear bumper. DURA BAK lined rocker protection. And a bunch of new front end stuff.

G-56 Gear ratios: 1st) 6.29:1 2nd) 3.48:1 3rd) 2.10:1 4th) 1.38:1 5th) 1.0:1 6th) 0.79:1 Rev 6.29:1 --- = 78.01613:1 Crawl Ratio
-------------------------5.94:1--------3.28:1-------1.98:1-------1.31:1-------1.0:1-------0.74:1-----5.42:1 ---- = 73.675:1
545RFE----------------3.0:1---------1.67:1--------1.0:1--------0.75:1-------0.67:1------------------3.0:1 -------=37.21:1

2013+ 32.47 crawl ratio...............Can you see the trend ??????????????

User avatar
nts007
2000_Posts
2000_Posts
Posts: 2271
Joined: Wed Dec 11, 2013 9:01 pm
Model Year: 2008
Location: Sask, Canada, Earth

Re: Frames

Post by nts007 » Mon Mar 20, 2017 1:36 pm

Chrysler is to cheap to actually make a different Frame for the pw. But they want you to think they did :wink:
08 ctd--mini max--thuren 3" coils and LT Leaves--4.56 gears and lockers in pw axles--some lights--afe intake system--bd super b turbo--Banks w/m Injection--Dynatrac Balljoints--king 2.5"s--37" Hankook Dynapro MT--DOR Long arms--Custom emf track bar--Manual T-case swap--Full PW Under armor--PSC Hydro Assist and so much more

Post Reply