LOCKER BYPASS KIT 2015
LOCKER BYPASS KIT 2015
Hello all,
Please don't yell at me But were do I find a bypass kit for a 2015?
Thank you, Andy
Please don't yell at me But were do I find a bypass kit for a 2015?
Thank you, Andy
- stamm20
- 50_Posts
- Posts: 218
- Joined: Fri May 25, 2012 1:51 pm
- Model Year: 2007
- Location: Greenville, NC
Re: LOCKER BYPASS KIT 2015
In the vendor area myyoung makes em and sells them his stuff is quality.
Sent from my XT1254 using Tapatalk
Sent from my XT1254 using Tapatalk
07 Brilliant Black Power Wagon
Current Mods: 35x12.50x17 Kelly Fierce Attitude M/T, DiabloSport Predator tuner, 3in Super 40 with 3in dump, TPS bypass, Pioneer touch screen Nav System with ipod hookup, Carli front diff gaurd, Fox adjustable steering stabilizer, Mopar steering box upgrade weathertec floor mats, Fox 2.0 performance shocks, hardwired lockers, evo swaybar disconnect
Yea Though I wheel through the valley of the shadow of death,
I will fear no evil: For thou lockers are with me;
Thy lift and thy tires, they comfort me.
Thou preparest a spotter before me in the presence of mine obstacles
Current Mods: 35x12.50x17 Kelly Fierce Attitude M/T, DiabloSport Predator tuner, 3in Super 40 with 3in dump, TPS bypass, Pioneer touch screen Nav System with ipod hookup, Carli front diff gaurd, Fox adjustable steering stabilizer, Mopar steering box upgrade weathertec floor mats, Fox 2.0 performance shocks, hardwired lockers, evo swaybar disconnect
Yea Though I wheel through the valley of the shadow of death,
I will fear no evil: For thou lockers are with me;
Thy lift and thy tires, they comfort me.
Thou preparest a spotter before me in the presence of mine obstacles
- olyelr
- 2000_Posts
- Posts: 3658
- Joined: Sun Dec 07, 2014 9:00 pm
- Model Year: 2016
- Location: Kewadin, MI
Re: LOCKER BYPASS KIT 2015
ANDY wrote:Hello all,
Please don't yell at me But were do I find a bypass kit for a 2015?
Thank you, Andy
Andy, HOW ABOUT YOU FIND THE SEARCH BUTTON AND FIGURE IT OUT ON YOUR OWN!
Welcome to the PWR. There are a few smartasses around these parts, but most are very nice and helpful.
Like stamm stated, there is a list to get on... but good luck with that. I emailed him long ago, what seems like a half year ago, and still havnt heard boo. I guess hes a real busy man.
2016 Ram Power Wagon Laramie - Granite Crystal Metallic - Ramboxes - 35” AT3W - TazerRAM
-
- 50_Posts
- Posts: 205
- Joined: Tue Mar 05, 2013 8:28 pm
- Model Year: 2012
- Location: Milford,MA
Re: LOCKER BYPASS KIT 2015
He stopped making them a couple of years ago shortly after he traded his Power Wagon.
CajunPW took over production,but don't know if he's still making them
CajunPW took over production,but don't know if he's still making them
2012
,MYoung locker bypass,Dynatrac bjs,Dynatrac no-spin kit w/Dynaloc hubs,Thuren 3" coils,trackbar,shackles and Kings(3"F-2.5"R) shocks,Thuren Alien arms,Thuren/King steering stabilizer,Carli diff guard,White Knuckle sliders,Thuren bumper,37" Cooper STT Pros,Corsa exhaust
,MYoung locker bypass,Dynatrac bjs,Dynatrac no-spin kit w/Dynaloc hubs,Thuren 3" coils,trackbar,shackles and Kings(3"F-2.5"R) shocks,Thuren Alien arms,Thuren/King steering stabilizer,Carli diff guard,White Knuckle sliders,Thuren bumper,37" Cooper STT Pros,Corsa exhaust
-
- 50_Posts
- Posts: 88
- Joined: Mon Mar 02, 2015 8:44 pm
- Model Year: 2014
Re: LOCKER BYPASS KIT 2015
Let me know what you find. I'd be interested in the bypass kit for a 2015 since this thread is going.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- adeluca73
- 2000_Posts
- Posts: 2126
- Joined: Mon May 19, 2014 11:56 pm
- Model Year: 2014
- Location: The Pentagon, VA
Re: LOCKER BYPASS KIT 2015
-Morgan (myyoung) designed and start fabbing the by-pass, then one day he sort of fell off the grid. After putting considerable $ in mods/upgrades, he sold his PW, bought a 1500 Outdoorsman, and poof was gone.
- Cajun and maybe Pit Slave started making them on sporadic intervals, but nothing sustainable. I think Cajun got all the plans and schematics from Morgan to make his version, not sure where it stands as of now. Starting to look like the by-pass is becoming hen's teeth....should probably hold on to mine...
- Cajun and maybe Pit Slave started making them on sporadic intervals, but nothing sustainable. I think Cajun got all the plans and schematics from Morgan to make his version, not sure where it stands as of now. Starting to look like the by-pass is becoming hen's teeth....should probably hold on to mine...
Re: LOCKER BYPASS KIT 2015
How much were they selling for?
Sent from my XT1650 using Tapatalk
Sent from my XT1650 using Tapatalk
-
- 50_Posts
- Posts: 88
- Joined: Mon Mar 02, 2015 8:44 pm
- Model Year: 2014
Re: LOCKER BYPASS KIT 2015
Is it just a computer controller you plug into the truck, or is there more to it than that?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- Low_Sky
- 500_Posts
- Posts: 957
- Joined: Fri May 01, 2015 7:12 pm
- Model Year: 2015
- Location: Eagle River, Alaska
Re: LOCKER BYPASS KIT 2015
Guys, use the search function and do some reading. The information is all there. Nobody is making them currently anyway, so it's not like you need to inform your decision on whether or not to get one.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- Rodeoflyer
- 500_Posts
- Posts: 515
- Joined: Fri Jun 17, 2016 10:53 am
- Model Year: 2016
- Location: Conifer, CO
Re: LOCKER BYPASS KIT 2015
Here's the cliff notes: crawl under your truck and clip the wires to your transfer case then wire in a resistor or potentiometer (because the exact ohm resistor that's required is still up in the air). Easy peasy and won't affect your warranty in any way . j/k, proceed at your own risk. I would like to do the mod, however my lockers lock right up with the combination of 4lo and throwing the tranny into neutral then drive. It WOULD be nice to have the ability to fully lock up in 4hi or rear in 2wd but I'm assessing the risk/reward at this point.
Re: LOCKER BYPASS KIT 2015
Rear locker in 2Hi would be nice. I use it now and used it alot on my raptor.
Sent from my XT1650 using Tapatalk
Sent from my XT1650 using Tapatalk
- Retired BLM Rig
- 1000_Posts
- Posts: 1123
- Joined: Sun Jan 31, 2016 6:51 pm
- Model Year: 2008
- Location: State of Jefferson
Re: LOCKER BYPASS KIT 2015
Does the Raptor have any limitations on their locker system like the PW does (speed limit, 4 low, throttle mapping)?NickPic83 wrote:Rear locker in 2Hi would be nice. I use it now and used it alot on my raptor.
Was it quick to lock up?
Just wondering.
2008 Quad Cab - Stock RTI = 655, curb weight = 6081 lbs. Abel Components Plug & Play Locker Bypass®, Abel Components Full SmartBar Bypass®, Abel Components Nanny Kill Switch®, 2000 Watt ProMariner TruePower Plus Pure Sine Wave Inverter, Trailer Hitch Storage, MOLLE Door Panels, Wilton Hitch Vice, Locking Under Seat Storage Drawer, Smittybilt 2781 Air Compressor, 14K PullPal, Hi-Lift First Responder Jack, 25' Jumper Cable System, Slip Yoke Eliminator in a Can, Evolution vs. God, Share the Umbrella, Make sure you're right with God before you meet him!
Re: LOCKER BYPASS KIT 2015
Only safety was that it unlocked over 30 mph.Retired BLM Rig wrote:Does the Raptor have any limitations on their locker system like the PW does (speed limit, 4 low, throttle mapping)?NickPic83 wrote:Rear locker in 2Hi would be nice. I use it now and used it alot on my raptor.
Was it quick to lock up?
Just wondering.
The raptor and my superduty rear locker locks up almost instantly and it doesn't require any dancing. Sometimes I just have to creep forward slightly.
Sent from my XT1650 using Tapatalk
Re: LOCKER BYPASS KIT 2015
Only safety was that it unlocked over 30 mph.Retired BLM Rig wrote:Does the Raptor have any limitations on their locker system like the PW does (speed limit, 4 low, throttle mapping)?NickPic83 wrote:Rear locker in 2Hi would be nice. I use it now and used it alot on my raptor.
Was it quick to lock up?
Just wondering.
The raptor and my superduty rear locker locks up almost instantly and it doesn't require any dancing. Sometimes I just have to creep forward slightly.
Sent from my XT1650 using Tapatalk
Re: LOCKER BYPASS KIT 2015
Why Cant we just find the 4low wire on the t-case and run a small switch on the dash so it thinks it is in 4low? Or is that way to easy.
PS. I have done a lot of looking around and there is no definite answers.
PS. I have done a lot of looking around and there is no definite answers.
- Vee
- 50_Posts
- Posts: 109
- Joined: Wed Feb 03, 2016 10:40 pm
- Model Year: 2007
- Location: Westcliffe, Colorado
Re: LOCKER BYPASS KIT 2015
It works on the 3rd gens. I would think if you found the right resistor ohms it would work. I have one on my 07 and it works great.ANDY wrote:Why Cant we just find the 4low wire on the t-case and run a small switch on the dash so it thinks it is in 4low? Or is that way to easy.
PS. I have done a lot of looking around and there is no definite answers.
Sent from my SM-G900V using Tapatalk
Not all those who wander are lost
Re: LOCKER BYPASS KIT 2015
Why do we need to have a resistor in the line to a switch?
- Vee
- 50_Posts
- Posts: 109
- Joined: Wed Feb 03, 2016 10:40 pm
- Model Year: 2007
- Location: Westcliffe, Colorado
Re: LOCKER BYPASS KIT 2015
The computer knows what position it is in from the ohms coming from the sensor. http://powerwagonregistry.org/locker_bypass.phpANDY wrote:Why do we need to have a resistor in the line to a switch?
Sent from my SM-G900V using Tapatalk
Not all those who wander are lost
- olyelr
- 2000_Posts
- Posts: 3658
- Joined: Sun Dec 07, 2014 9:00 pm
- Model Year: 2016
- Location: Kewadin, MI
Re: LOCKER BYPASS KIT 2015
The other thing that was kind of nice about the myoung kit is that is was plug and play and utilized the factory knob on the dash.
But I am all for an added switch for it to function too!
But I am all for an added switch for it to function too!
2016 Ram Power Wagon Laramie - Granite Crystal Metallic - Ramboxes - 35” AT3W - TazerRAM
- Vee
- 50_Posts
- Posts: 109
- Joined: Wed Feb 03, 2016 10:40 pm
- Model Year: 2007
- Location: Westcliffe, Colorado
Re: LOCKER BYPASS KIT 2015
If there is no option for a plug and play kit, this option if it works on newer trucks is less than 20 bucks. Took me about an hour. It still limits the speed on the swaybar disco, but I have lockers in 2hi and 4hi.
Sent from my SM-G900V using Tapatalk
Sent from my SM-G900V using Tapatalk
Not all those who wander are lost
- Vee
- 50_Posts
- Posts: 109
- Joined: Wed Feb 03, 2016 10:40 pm
- Model Year: 2007
- Location: Westcliffe, Colorado
Re: LOCKER BYPASS KIT 2015
I would wager that there is a good chance that the ohms are the same as the earlier trucks. Same T case, and probably the same sensor. Someone with a new truck needs to be brave...[FEARFUL FACE]
Sent from my SM-G900V using Tapatalk
Sent from my SM-G900V using Tapatalk
Not all those who wander are lost
- Vee
- 50_Posts
- Posts: 109
- Joined: Wed Feb 03, 2016 10:40 pm
- Model Year: 2007
- Location: Westcliffe, Colorado
Re: LOCKER BYPASS KIT 2015
Never mind, I forgot they changed transfer cases. Somebody still needs to try it.Vee wrote:I would wager that there is a good chance that the ohms are the same as the earlier trucks. Same T case, and probably the same sensor. Someone with a new truck needs to be brave...[FEARFUL FACE]
Sent from my SM-G900V using Tapatalk
Sent from my SM-G900V using Tapatalk
Not all those who wander are lost
- Retired BLM Rig
- 1000_Posts
- Posts: 1123
- Joined: Sun Jan 31, 2016 6:51 pm
- Model Year: 2008
- Location: State of Jefferson
Re: LOCKER BYPASS KIT 2015
Someone did try it. ACBoomer16 did it at the end of this thread. http://forum.powerwagonregistry.org/vie ... f=2&t=3953
He said he adjusted his variable potentiometer to 49.2 ohms. Radio Shack has a 47 ohm 5% tolerance resistor that may do the trick, or just do what ACBoomer16 did with a potentiometer.
Yes you too can have your own homemade plug and play locker bypass on your new truck for $20 and you don't have to cut the factory harness.
He said he adjusted his variable potentiometer to 49.2 ohms. Radio Shack has a 47 ohm 5% tolerance resistor that may do the trick, or just do what ACBoomer16 did with a potentiometer.
Yes you too can have your own homemade plug and play locker bypass on your new truck for $20 and you don't have to cut the factory harness.
2008 Quad Cab - Stock RTI = 655, curb weight = 6081 lbs. Abel Components Plug & Play Locker Bypass®, Abel Components Full SmartBar Bypass®, Abel Components Nanny Kill Switch®, 2000 Watt ProMariner TruePower Plus Pure Sine Wave Inverter, Trailer Hitch Storage, MOLLE Door Panels, Wilton Hitch Vice, Locking Under Seat Storage Drawer, Smittybilt 2781 Air Compressor, 14K PullPal, Hi-Lift First Responder Jack, 25' Jumper Cable System, Slip Yoke Eliminator in a Can, Evolution vs. God, Share the Umbrella, Make sure you're right with God before you meet him!