Hanging up the winch, moving on.

If it's about Power Wagons, all generations, this is where it'll go. This is the original PWR Forum Power Wagon Technical Discussion Section. And this includes everything that doesn’t fit in any one of the other categories related to the truck goes here!
User avatar
08TwinStickPW
250_Posts
250_Posts
Posts: 274
Joined: Wed Aug 22, 2012 9:24 am
Model Year: 2008
Location: Ulster County, NY

Hanging up the winch, moving on.

Post by 08TwinStickPW » Tue Aug 30, 2016 3:46 pm

Short version, I am trading my truck in this week on a new fully loaded QC 1500 sport.

Longer version,
Love the wagon but never used it as intended, bought it because I was looking for a Laramie 2500, and found the wagon, the stick sealed the deal for me.

I have had it for about 6 years and never had any major complaint, its just time to move on. I don't off road it much if at all and don't use the 2500 ability as much as I though I would. To top all that off the wife refuses to drive it because its huge and a stick so we looked at new 1500's and she enjoyed driving the new truck and was comfortable so it was a done deal.

I will be de-modding the PW for the trade in, friend is buying the steering brace and diff guard, lights and mounts for behind hte grill will be avail, misc. stereo stuff and the Diablo tuner as well and will be posted in the F/S section.

This is a great forum and I will miss the info here.

P.S.
It will be for sale at the dealers lot (if my sales guy does not buy it), I think they are going to ask $25K for it and comes with the remaining added care + warranty which is good till 4/23/2018 if anyone is looking.

No damage and never beat offroad, looks better than new, only 45K miles (I think, might be closer to 46K).
08' Dodge RAM PowerWagon (Laramie, 6 Speed)
GO: Diablo tuned, AEM drop in, Magnaflow "Y" and 24" muffler (dumper over the axle)
Traction/Suspension:305-70-17 Toyo AT2's, DT Profab Steering Brace, Carli front diff guard.
See: Silver stars headlights, 9012 fogs, reprogrammed for fogs with high beams, (2)6" KC LED gravity in driving/spread behind the grill
Tunes:Pioneer AVH-X5800BHS w/stock infinity amp, Infinity ref. dash/reardoor speakers, kappa component front door, JL rear stealth box and JX500.1d.
Other: Dually marker light under the tailgate, 2013+ Red hemi badges, Bedtred bedliner and mopar rubber mat, Wheel well liners, rubber flaps, Bakflip MX4, W2W Mopar steps (bedlined black), weathertech front mats and rain deflectors.

User avatar
verdesardog
500_Posts
500_Posts
Posts: 989
Joined: Thu May 31, 2012 11:24 am
Model Year: 2006

Re: Hanging up the winch, moving on.

Post by verdesardog » Tue Aug 30, 2016 3:53 pm

Well see, like I said m any years ago...power wagon??we don't need no stinkin power wagon.
So now is everyone going to tell you that you have PW envy like they all told me?
It's all good, hope you enjoy your new truck!
2006 Big Horn 2500 Ram CTD. IMAGINE ALL THE PEOPLE LIVING LIFE IN PEACE
Image

User avatar
cruz
500_Posts
500_Posts
Posts: 998
Joined: Sat May 26, 2012 11:36 am
Location: Santa Cruz, CA

Re: Hanging up the winch, moving on.

Post by cruz » Tue Aug 30, 2016 4:42 pm

verdesardog wrote:Well see, like I said m any years ago...power wagon??we don't need no stinkin power wagon.
You know what's funny 'dog, people always ask me " why didn't you get a diesel? ", and I reply " I don't need no stinkin' diesel" :D

Best of luck 08TwinStickPW, post some pics of your new truck. :cheers:
2005 Power Wagon

RustyPW
2000_Posts
2000_Posts
Posts: 5440
Joined: Thu May 24, 2012 4:23 pm
Model Year: 2008
Location: Brownsville Pa.

Re: Hanging up the winch, moving on.

Post by RustyPW » Tue Aug 30, 2016 5:13 pm

08, best of luck with the new truck. Post up about a review of the new truck later.
PWOC #53
2008 POWER WAGON RC

My build thread. http://forum.powerwagonregistry.org/vie ... =13&t=2826 :cash: :cash:

Moab '09, '10, '12, '14.
Rausch Creek - Summer '10, Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18, Summer '20, Summer '22,
AOAA Summer '19.

Russ
NRA - Benefactor, Golden Eagle. :lockedandloaded:

User avatar
coder
1000_Posts
1000_Posts
Posts: 1347
Joined: Wed Jun 06, 2012 5:18 pm
Model Year: 2007
Location: Trabuco Canyon, CA

Re: Hanging up the winch, moving on.

Post by coder » Tue Aug 30, 2016 7:29 pm

Sorry to see you go good luck, those QC's sports are sweet, enjoy!
Vehicle: 2007 Power Wagon Quad Cab - Factory Options (Inferno Red, Premium Cloth Bench Seat, Light Group, Automatic Transmission, Leather Steering Wheel)
Suspension: Carli 3" Hemi Coils, Carli Control Arms, Carli King 2.5 Pin-Tops, Carli Stainless Steering Stabilizer, Carli Trackbar | Synergy 1" Rear Shackle
Performance: Magnaflow Muffler | Magnaflow Y-Pipe
Wheels/Tires: Yokohama X-A/T 35x12.5x17
Steering/Drivetrain/Axles: Carli Front Diff Guard | Dynatrac Ball Joints | Mopar HD Steering Gear
Miscellaneous: Line-X Bedliner | Locker Bypass Switch | Mopar Rock Rails | Odyssey Extreme 65-PC1750T | Performance Friction Brake Pads | Weathertech Digital Fit Mats | Winch Thermal Protection Bypass

TwinStick

Re: Hanging up the winch, moving on.

Post by TwinStick » Tue Aug 30, 2016 9:51 pm

:shock: Can't believe you are getting rid of a G-56'ed Power Wagon. If I had some extra cash, I would buy it myself.

Enjoy the new one. Hope you don't get into any "damn, wish i still had the wagon" situations.

User avatar
08TwinStickPW
250_Posts
250_Posts
Posts: 274
Joined: Wed Aug 22, 2012 9:24 am
Model Year: 2008
Location: Ulster County, NY

Re: Hanging up the winch, moving on.

Post by 08TwinStickPW » Wed Aug 31, 2016 7:55 am

Thanks everyone.

I am sure I will miss RED, the times I used it as intended it always impressed me.

2 weeks ago I was helping some friends and was ripping out shrubs in 4lo, 1st gear and just letting the clutch out with no gas....it was so easy.

The new truck will go a different direction, I may do a 2" real drop to level it and add bags for towing......or raise the front, not sure yet.

It will be getting a Corsa exhaust and some speaker/sub and lighting upgrades this year :twisted:
08' Dodge RAM PowerWagon (Laramie, 6 Speed)
GO: Diablo tuned, AEM drop in, Magnaflow "Y" and 24" muffler (dumper over the axle)
Traction/Suspension:305-70-17 Toyo AT2's, DT Profab Steering Brace, Carli front diff guard.
See: Silver stars headlights, 9012 fogs, reprogrammed for fogs with high beams, (2)6" KC LED gravity in driving/spread behind the grill
Tunes:Pioneer AVH-X5800BHS w/stock infinity amp, Infinity ref. dash/reardoor speakers, kappa component front door, JL rear stealth box and JX500.1d.
Other: Dually marker light under the tailgate, 2013+ Red hemi badges, Bedtred bedliner and mopar rubber mat, Wheel well liners, rubber flaps, Bakflip MX4, W2W Mopar steps (bedlined black), weathertech front mats and rain deflectors.

Colibri
1000_Posts
1000_Posts
Posts: 1713
Joined: Mon Jun 08, 2015 5:44 pm
Model Year: 2009

Re: Hanging up the winch, moving on.

Post by Colibri » Wed Aug 31, 2016 8:29 am

Damn, hope you stick around sir. Pics of the new truck too please!
Central Texas and Houston area
2009 5.7 auto quadcab
Carli 3” coils deaver leafs 3” kings with 4 tube bypass rear and fr/rr hydro bumps
Howe steering pump and gear with hydraulic ram assist
Custom tube bumpers and white knuckle sliders
Creative fab trussed axle. rem polished and cryoed 5.13 gears with arb lockers fr/rr
Sharadon stage 2 545rfe with 3000 stall edge converter
Lots of other stuff lol

TwinStick

Re: Hanging up the winch, moving on.

Post by TwinStick » Wed Aug 31, 2016 8:32 am

I have been wanting to look at an eco-diesel but around here, they are like the phoenix, people have heard of them but no one has ever actually seen one. I test drove one a few years back but it had a deal pending & was sold by the time i got back from the test drive. Small world---a guy I used to work with bought it. They have not had one since. They say "we just can't get them".

User avatar
08TwinStickPW
250_Posts
250_Posts
Posts: 274
Joined: Wed Aug 22, 2012 9:24 am
Model Year: 2008
Location: Ulster County, NY

Re: Hanging up the winch, moving on.

Post by 08TwinStickPW » Wed Aug 31, 2016 1:00 pm

TwinStick wrote:I have been wanting to look at an eco-diesel but around here, they are like the phoenix, people have heard of them but no one has ever actually seen one. I test drove one a few years back but it had a deal pending & was sold by the time i got back from the test drive. Small world---a guy I used to work with bought it. They have not had one since. They say "we just can't get them".
Stay away from the Eco Diesels!!!!!

My guys at the dealer have done a few motors already, they have issues!
08' Dodge RAM PowerWagon (Laramie, 6 Speed)
GO: Diablo tuned, AEM drop in, Magnaflow "Y" and 24" muffler (dumper over the axle)
Traction/Suspension:305-70-17 Toyo AT2's, DT Profab Steering Brace, Carli front diff guard.
See: Silver stars headlights, 9012 fogs, reprogrammed for fogs with high beams, (2)6" KC LED gravity in driving/spread behind the grill
Tunes:Pioneer AVH-X5800BHS w/stock infinity amp, Infinity ref. dash/reardoor speakers, kappa component front door, JL rear stealth box and JX500.1d.
Other: Dually marker light under the tailgate, 2013+ Red hemi badges, Bedtred bedliner and mopar rubber mat, Wheel well liners, rubber flaps, Bakflip MX4, W2W Mopar steps (bedlined black), weathertech front mats and rain deflectors.

Jbostick
Posts: 25
Joined: Mon Dec 21, 2015 8:02 am
Model Year: 2012

Re: Hanging up the winch, moving on.

Post by Jbostick » Wed Aug 31, 2016 8:09 pm

Be sure to post up a link to the dealers site, may have a friend interested.
2012 Power Wagon, Thuren Control arms, Thuren Track bar, Thruen 2inch Coils, Thruen Overland shocks. 37x12.50x17 Toyo RTs, Locker Bypass

65plymouth
50_Posts
50_Posts
Posts: 79
Joined: Thu Jul 28, 2016 11:09 am
Location: Michigan

Re: Hanging up the winch, moving on.

Post by 65plymouth » Thu Sep 01, 2016 10:15 am

TwinStick wrote:I have been wanting to look at an eco-diesel but around here, they are like the phoenix, people have heard of them but no one has ever actually seen one. I test drove one a few years back but it had a deal pending & was sold by the time i got back from the test drive. Small world---a guy I used to work with bought it. They have not had one since. They say "we just can't get them".
Good luck to you...

I live north of Detroit... Their are Tons of Eco-diesels here. I see one or two every day. People I talk to seem to like them.
2016 Ram 2500 Tradesman Power Wagon - Granite Crystal Metallic

User avatar
adeluca73
2000_Posts
2000_Posts
Posts: 2126
Joined: Mon May 19, 2014 11:56 pm
Model Year: 2014
Location: The Pentagon, VA

Re: Hanging up the winch, moving on.

Post by adeluca73 » Thu Sep 01, 2016 2:43 pm

Sucks to see you go. Damn, but everyone has to do as they must. I sure would like to get a G-56 PW...just not right now.
2014 Ram PW SLT: 1st year of the Best Gen
<Build Thread>

User avatar
yooper68
50_Posts
50_Posts
Posts: 141
Joined: Tue Nov 18, 2014 8:20 am
Location: UP Michigan

Re: Hanging up the winch, moving on.

Post by yooper68 » Thu Sep 01, 2016 2:43 pm

Best of luck in whatever you decide, TwinStick

I really thought I wanted an EcoDiesel ever since I heard they were coming out; test drove a few but performance was only so-so and price is about the same as Power Wagon with similar options. Payload is less than a Power Wagon, also. Then I read a few posts on ram1500diesel forum comparing Eco-Diesel's and Power Wagons, and I tried out a few new Power Wagons. If I drove a truck a lot of miles per year, then maybe an EcoDiesel would make sense; but for someone driving a truck 5,000 miles or so a year there is no economic way to justify the Eco-Diesel initial price. I am convinced that newer Power Wagons are the best solution for my needs; just need to convince my wife that it's okay to spend the money ;-) Until then, I'm very satisfied with my 2003 3/4 ton....
Trucks: 2003 4x4 Dodge 3/4 ton, 1972 4x4 Ford 3/4 ton (factory hi-boy), shopping for new Power Wagon (maybe 2024?)

User avatar
Sumbeach84
50_Posts
50_Posts
Posts: 81
Joined: Mon Apr 11, 2016 6:12 pm
Model Year: 2009
Location: Michigan

Re: Hanging up the winch, moving on.

Post by Sumbeach84 » Thu Sep 01, 2016 10:50 pm

Good luck in everything you do!
How much for the Diablo tuner and winch? Lol

User avatar
08TwinStickPW
250_Posts
250_Posts
Posts: 274
Joined: Wed Aug 22, 2012 9:24 am
Model Year: 2008
Location: Ulster County, NY

Re: Hanging up the winch, moving on.

Post by 08TwinStickPW » Fri Sep 02, 2016 8:24 am

The truck is officially traded in.

The dealer is http://www.youngsmotors.net/, best contact is Kevin Smith, truck had 44,700 miles on it when I traded it in, they will be asking $25,000 and I t will have a warranty until 04/23/2018.

Will post pics of the new truck later

.........

Older diablo tuner u7135, asking $100+shipping
Unmarried and ready to go
08' Dodge RAM PowerWagon (Laramie, 6 Speed)
GO: Diablo tuned, AEM drop in, Magnaflow "Y" and 24" muffler (dumper over the axle)
Traction/Suspension:305-70-17 Toyo AT2's, DT Profab Steering Brace, Carli front diff guard.
See: Silver stars headlights, 9012 fogs, reprogrammed for fogs with high beams, (2)6" KC LED gravity in driving/spread behind the grill
Tunes:Pioneer AVH-X5800BHS w/stock infinity amp, Infinity ref. dash/reardoor speakers, kappa component front door, JL rear stealth box and JX500.1d.
Other: Dually marker light under the tailgate, 2013+ Red hemi badges, Bedtred bedliner and mopar rubber mat, Wheel well liners, rubber flaps, Bakflip MX4, W2W Mopar steps (bedlined black), weathertech front mats and rain deflectors.

azracer
1000_Posts
1000_Posts
Posts: 1367
Joined: Thu May 24, 2012 8:34 pm

Re: Hanging up the winch, moving on.

Post by azracer » Fri Sep 02, 2016 3:43 pm

Dam I think something is in the air with everyone I know playing the lets change cards.
From divorce, jobs, house to cars and trucks everyone it seems is changing something this summer.

Good luck with the new truck. :rockon:
Last edited by azracer on Fri Sep 02, 2016 5:51 pm, edited 1 time in total.
My build 2009 3G
http://forum.powerwagonregistry.org/vie ... =13&t=2305

Beginners reading list:
1) Quigley’s Anglo-American Establishment – 354 pages http://www.carrollquigley.net/pdf/the_a ... shment.pdf
2) Wall Street and the Bolshevik Revolution by Antony C. Sutton 165 pages https://www.voltairenet.org/IMG/pdf/Sut ... tion-5.pdf
3) Wall Street & the Rise of Hitler by Antony C. Sutton 148 pages https://www.voltairenet.org/IMG/pdf/Sut ... Hitler.pdf
4) Wall Street and FDR by Antony C. Sutton 177 pages http://sandiego.indymedia.org/media/2007/02/125049.pdf
5) Dishonest Money by Joseph Plummer 175 pages http://joeplummer.com/dishonest-money.html
6) None Dare Call it Conspiracy by Gary Allen 197 pages http://www.outpost-of-freedom.com/libra ... y_1971.pdf
David Rockefeller: Memoirs (The story of traitors)
http://www.devvy.com/pdf/2006_November/ ... rnment.pdf

User avatar
verdesardog
500_Posts
500_Posts
Posts: 989
Joined: Thu May 31, 2012 11:24 am
Model Year: 2006

Re: Hanging up the winch, moving on.

Post by verdesardog » Fri Sep 02, 2016 5:00 pm

08TwinStickPW wrote:Short version, I am trading my truck in this week on a new fully loaded QC 1500 sport.
You could always put a winch on your new truck!
2006 Big Horn 2500 Ram CTD. IMAGINE ALL THE PEOPLE LIVING LIFE IN PEACE
Image

User avatar
Sumbeach84
50_Posts
50_Posts
Posts: 81
Joined: Mon Apr 11, 2016 6:12 pm
Model Year: 2009
Location: Michigan

Re: Hanging up the winch, moving on.

Post by Sumbeach84 » Fri Sep 02, 2016 8:35 pm

You know what years that tuner works for? I have an 09 but it's the 2nd gen Hemi. So not sure if it would work or not I can't find much info on it being discontinued now. Any idea on power gains?
You sure it's not a u7137? Says the 7135 is for most cars and jeeps. Trucks use different software and its suppose to be a 7137?

Colibri
1000_Posts
1000_Posts
Posts: 1713
Joined: Mon Jun 08, 2015 5:44 pm
Model Year: 2009

Re: Hanging up the winch, moving on.

Post by Colibri » Fri Sep 02, 2016 8:52 pm

Are you 100% sure about your motor? I have an 09 as well and it is definitely the newer generation motor in mine.
Central Texas and Houston area
2009 5.7 auto quadcab
Carli 3” coils deaver leafs 3” kings with 4 tube bypass rear and fr/rr hydro bumps
Howe steering pump and gear with hydraulic ram assist
Custom tube bumpers and white knuckle sliders
Creative fab trussed axle. rem polished and cryoed 5.13 gears with arb lockers fr/rr
Sharadon stage 2 545rfe with 3000 stall edge converter
Lots of other stuff lol

User avatar
Sumbeach84
50_Posts
50_Posts
Posts: 81
Joined: Mon Apr 11, 2016 6:12 pm
Model Year: 2009
Location: Michigan

Re: Hanging up the winch, moving on.

Post by Sumbeach84 » Fri Sep 02, 2016 9:07 pm

Colibri wrote:Are you 100% sure about your motor? I have an 09 as well and it is definitely the newer generation motor in mine.
Yes that's what I was saying our 09 trucks are still the 3rd gen body but have the newer engine than the 08 trucks so just making sure the programmer would work

RustyPW
2000_Posts
2000_Posts
Posts: 5440
Joined: Thu May 24, 2012 4:23 pm
Model Year: 2008
Location: Brownsville Pa.

Re: Hanging up the winch, moving on.

Post by RustyPW » Fri Sep 02, 2016 9:45 pm

In '09. They changed the intake manifold and throttle body. And gave it a bump in hp and torque.
PWOC #53
2008 POWER WAGON RC

My build thread. http://forum.powerwagonregistry.org/vie ... =13&t=2826 :cash: :cash:

Moab '09, '10, '12, '14.
Rausch Creek - Summer '10, Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18, Summer '20, Summer '22,
AOAA Summer '19.

Russ
NRA - Benefactor, Golden Eagle. :lockedandloaded:

Colibri
1000_Posts
1000_Posts
Posts: 1713
Joined: Mon Jun 08, 2015 5:44 pm
Model Year: 2009

Re: Hanging up the winch, moving on.

Post by Colibri » Fri Sep 02, 2016 10:00 pm

Ah gotcha, we're saying the same thing and I didn't realize lol.
Central Texas and Houston area
2009 5.7 auto quadcab
Carli 3” coils deaver leafs 3” kings with 4 tube bypass rear and fr/rr hydro bumps
Howe steering pump and gear with hydraulic ram assist
Custom tube bumpers and white knuckle sliders
Creative fab trussed axle. rem polished and cryoed 5.13 gears with arb lockers fr/rr
Sharadon stage 2 545rfe with 3000 stall edge converter
Lots of other stuff lol

User avatar
Sumbeach84
50_Posts
50_Posts
Posts: 81
Joined: Mon Apr 11, 2016 6:12 pm
Model Year: 2009
Location: Michigan

Re: Hanging up the winch, moving on.

Post by Sumbeach84 » Fri Sep 02, 2016 10:49 pm

No prob at all Colibri. Small misunderstanding. Hoping to hear back and it is Infact a tuner that will
Work me for

User avatar
Sumbeach84
50_Posts
50_Posts
Posts: 81
Joined: Mon Apr 11, 2016 6:12 pm
Model Year: 2009
Location: Michigan

Re: Hanging up the winch, moving on.

Post by Sumbeach84 » Wed Sep 07, 2016 9:17 pm

Did ya check on your part number yet? Just wondering if this will work for my Truck or not thanks

Post Reply