4th gen winch on a 3rd gen?

If it's about Power Wagons, all generations, this is where it'll go. This is the original PWR Forum Power Wagon Technical Discussion Section. And this includes everything that doesn’t fit in any one of the other categories related to the truck goes here!
Post Reply
User avatar
Sumbeach84
50_Posts
50_Posts
Posts: 81
Joined: Mon Apr 11, 2016 6:12 pm
Model Year: 2009
Location: Michigan

4th gen winch on a 3rd gen?

Post by Sumbeach84 » Mon Apr 18, 2016 8:58 pm

Anybody know if the 4th gen winch bracket will fit a 3rd gen truck? Didn't know if they changed frames or anything just got offered a great deal on a 2014 winch and bracket just wanted to make sure I wasn't wasting my money
Top
User avatar
SheepdogOutdoorsman
1000_Posts
1000_Posts
Posts: 1061
Joined: Fri Oct 18, 2013 10:03 am
Location: Mesa, AZ

Re: 4th gen winch on a 3rd gen?

Post by SheepdogOutdoorsman » Mon Apr 18, 2016 10:03 pm

Not quite sure ... I've scoured the Internet, but can't find different part numbers for the two. I could have sworn they were different, but can't seem to verify. Might be worth calling a dealership to verify.


Sent from my iPhone using Tapatalk
The Sheepdog Outdoorsman

2013 Power Wagon: Trail Ready Pre-Runner Guard Front Bumper, PIAA 540 6" Driving Lamps, PIAA 530 4" Fog Lamps, Warn 10" Roller Fairleads, In-Cab Relocation Of Winch Controller Port, & More To Come ...
Top
User avatar
cruz
500_Posts
500_Posts
Posts: 998
Joined: Sat May 26, 2012 11:36 am
Location: Santa Cruz, CA

Re: 4th gen winch on a 3rd gen?

Post by cruz » Mon Apr 18, 2016 10:04 pm

I don't know how a 4G winch mounts up, but this is how the winch and cradle mount on a 3G ...
Attachments
Fullscreen capture 4182016 65809 PM.jpg
2005 Power Wagon
Top
User avatar
SheepdogOutdoorsman
1000_Posts
1000_Posts
Posts: 1061
Joined: Fri Oct 18, 2013 10:03 am
Location: Mesa, AZ

Re: 4th gen winch on a 3rd gen?

Post by SheepdogOutdoorsman » Mon Apr 18, 2016 10:07 pm

cruz wrote:I don't know how a 4G winch mounts up, but this is how the winch and cradle mount on a 3G ...
That sure looks the same ... Hard to tell though if it's the same
The Sheepdog Outdoorsman

2013 Power Wagon: Trail Ready Pre-Runner Guard Front Bumper, PIAA 540 6" Driving Lamps, PIAA 530 4" Fog Lamps, Warn 10" Roller Fairleads, In-Cab Relocation Of Winch Controller Port, & More To Come ...
Top
User avatar
Sumbeach84
50_Posts
50_Posts
Posts: 81
Joined: Mon Apr 11, 2016 6:12 pm
Model Year: 2009
Location: Michigan

Re: 4th gen winch on a 3rd gen?

Post by Sumbeach84 » Tue Apr 19, 2016 6:29 am

Found a guy 20 mins from me that has 2 4th gen winchs brand new never used with mounting bracket for $900 don't wanna miss a good deal lol
Top
User avatar
FirerescuePW
1000_Posts
1000_Posts
Posts: 1661
Joined: Sun May 20, 2012 12:51 pm
Location: North Wales, PA

Re: 4th gen winch on a 3rd gen?

Post by FirerescuePW » Tue Apr 19, 2016 6:39 am

Sumbeach84 wrote:Found a guy 20 mins from me that has 2 4th gen winchs brand new never used with mounting bracket for $900 don't wanna miss a good deal lol
Well, that seems odd...
'05 Mineral Gray Power Wagon QC #1005

WINCH MOB PROUD!

SuperChips FlashPaq; DT ProFab Steering Brace; 08.5 Steering linkage (twice); Toyo Open Country M/T 35/12.50x17; Carli front diff guard; Rockcrusher rear diff cover; White Knuckle Offroad Rock Rails; Carli 3"coils, track bar, and High Clearance Control Arms; Carli King 2.5" Remote Resi Shocks; Reflex spray-in liner; Extang Trifecta tonneau cover; Pop Lock electric tailgate lock (OOS); Tekonsha Prodigy brake control; LEDS & Strobes & Siren; Winch TPS Bypass; Warn Wireless Remote; Dog hair, and a BIG Wish List!
Top
User avatar
Sumbeach84
50_Posts
50_Posts
Posts: 81
Joined: Mon Apr 11, 2016 6:12 pm
Model Year: 2009
Location: Michigan

Re: 4th gen winch on a 3rd gen?

Post by Sumbeach84 » Tue Apr 19, 2016 7:02 am

It's a big off-road shop not worried about them being stolen lol and it's $900 each not for both
Top
User avatar
olyelr
2000_Posts
2000_Posts
Posts: 3658
Joined: Sun Dec 07, 2014 9:00 pm
Model Year: 2016
Location: Kewadin, MI

Re: 4th gen winch on a 3rd gen?

Post by olyelr » Tue Apr 19, 2016 8:03 am

Sumbeach84 wrote:It's a big off-road shop not worried about them being stolen lol and it's $900 each not for both
Thats still a pretty damn good deal with the mount.

The winch should work fine, although maybe in needs to be flipped? The mount on the other hand, that probably wont work. Im sure the frames are different.
2016 Ram Power Wagon Laramie - Granite Crystal Metallic - Ramboxes - 35” AT3W - TazerRAM

:patriot:
Top
waldo
250_Posts
250_Posts
Posts: 426
Joined: Sat Dec 26, 2015 7:46 am
Model Year: 2019

Re: 4th gen winch on a 3rd gen?

Post by waldo » Tue Apr 19, 2016 3:58 pm

I've got both trucks, but I'm 300 miles away from the 3 gen right now. I'll look at them side by side when I eventually get back home ( if you haven't gotten an answer by then).
2007 and 2019 Power Wagons
Top
User avatar
Sumbeach84
50_Posts
50_Posts
Posts: 81
Joined: Mon Apr 11, 2016 6:12 pm
Model Year: 2009
Location: Michigan

Re: 4th gen winch on a 3rd gen?

Post by Sumbeach84 » Tue Apr 19, 2016 4:38 pm

Thanks Waldo that would be helpful for me and others I'm sure
Top
User avatar
Stickman
500_Posts
500_Posts
Posts: 829
Joined: Mon Nov 18, 2013 12:02 am
Model Year: 2012
Location: Wayland, MO

Re: 4th gen winch on a 3rd gen?

Post by Stickman » Wed Apr 20, 2016 1:24 am

If I remember I'll take a peek under mine tommorow morning and update this if I remember.
Live To Ride, Ride To Live

2012 Ram Power Wagon - Check out my build thread to see my mods! http://forum.powerwagonregistry.org/vie ... =13&t=2187
Top
User avatar
Stickman
500_Posts
500_Posts
Posts: 829
Joined: Mon Nov 18, 2013 12:02 am
Model Year: 2012
Location: Wayland, MO

Re: 4th gen winch on a 3rd gen?

Post by Stickman » Wed Apr 20, 2016 3:13 pm

Just looked and my '12 mounts the same way as pictured above
Live To Ride, Ride To Live

2012 Ram Power Wagon - Check out my build thread to see my mods! http://forum.powerwagonregistry.org/vie ... =13&t=2187
Top
User avatar
SheepdogOutdoorsman
1000_Posts
1000_Posts
Posts: 1061
Joined: Fri Oct 18, 2013 10:03 am
Location: Mesa, AZ

Re: 4th gen winch on a 3rd gen?

Post by SheepdogOutdoorsman » Wed Apr 20, 2016 7:18 pm

If the frames are the same, the mount bracket should fit ...


Sent from my iPhone using Tapatalk
The Sheepdog Outdoorsman

2013 Power Wagon: Trail Ready Pre-Runner Guard Front Bumper, PIAA 540 6" Driving Lamps, PIAA 530 4" Fog Lamps, Warn 10" Roller Fairleads, In-Cab Relocation Of Winch Controller Port, & More To Come ...
Top
RustyPW
2000_Posts
2000_Posts
Posts: 5439
Joined: Thu May 24, 2012 4:23 pm
Model Year: 2008
Location: Brownsville Pa.

Re: 4th gen winch on a 3rd gen?

Post by RustyPW » Wed Apr 20, 2016 9:52 pm

If the brackets looks the same. Measure the distance across where it mounts to the frame. On both a 3G, 4G, and a 4.5G.
PWOC #53
2008 POWER WAGON RC

My build thread. http://forum.powerwagonregistry.org/vie ... =13&t=2826 :cash: :cash:

Moab '09, '10, '12, '14.
Rausch Creek - Summer '10, Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18, Summer '20, Summer '22,
AOAA Summer '19.

Russ
NRA - Benefactor, Golden Eagle. :lockedandloaded:
Top
Post Reply

Return to “Power Wagon Talk”