Stock Skid Plate part numbers, bumps stops, etc. help.

If it's about Power Wagons, all generations, this is where it'll go. This is the original PWR Forum Power Wagon Technical Discussion Section. And this includes everything that doesn’t fit in any one of the other categories related to the truck goes here!
Post Reply
User avatar
dodgeman324
50_Posts
50_Posts
Posts: 175
Joined: Tue Jan 20, 2015 9:33 pm
Location: Broken Arrow, Oklahoma

Stock Skid Plate part numbers, bumps stops, etc. help.

Post by dodgeman324 » Tue Apr 21, 2015 5:40 pm

Hello everyone. I'm soon to be dropping all the parts off of my Superlift and going with Thuren parts, but there are a few things that will be needed when I'm ready to install all of the Thuren parts. Since I bought the truck with the Superlift kit already on it, I don't have any of the stock Powerwagon parts so I'm hoping to find part numbers for them, and perhaps some of you can help.

My truck is a 2005 Quad Cab Powerwagon. I am looking for the stock bump stops front and rear, front steering damper skid plate, and the rear U-bolts for leaf springs. Any insight on any part numbers or knowledge on dimensions needed if I need to search aftermarket? I am going to the Thuren 3 inch Hemi Coils, the rear drop brackets, Thuren trackbar, Thuren steering damper, Thuren Control Arms. I will be getting the proper length Bilstein shocks per Don Thuren's recommendations. Thanks for any help you can provide.
Brandon T. - HollyFrontier / US Army Reserves - 13+ years combined Active and Reserves with 1 tour to Iraq in 2009.
2005 Dodge Ram SRT10 Quad Cab, with lots of upgrades = 600+whp/650+wtq.
2012 Chrysler Town and Country Limited, Pentastar V6, Dual DVD.

Former Vehicles:
2005 Dodge Ram PowerWagon, lots of upgrades.
2006 Dodge Ram Quad Cab 4X4 4.7L, White, Black wheels, K&N CAI, 70mm Throttle body, Superships, E-Fan conversion, LED Tails/3rd Brake, HID's
2011 Dodge Journey Mainstreet, Red, Sirius, Push button start, Pentastar.
2007 Dodge Powerwagon, 35inch Nitto's, AEM ColdAir, Flowmaster 40 (Oh I will miss you sooooooo much and I will buy you again when times are right)
2005 Jeep Grand Cherokee, QuadraDrive II, 2 inch lift, 31inch offroad tires. (Will also miss you too, I'll miss all the times a guy in a Wrangler says "You can't do this in THAT!" and then I do it without problems)
2004 Dodge Durango Crew Cab, 4X2, Rhinoliner, K&N Airfilter.
2004 Dodge Ram 1500 Quad Cab, Kenne Bell Supercharger Kit, Custom Headers, Borla exhaust, 508rwhp.
1998 Dodge Ram Quad Cab
1994 Dodge Ram Regular Cab (my first vehicle, besides the hand me down 1988 Ford Ranger)

Married 13 year, Father to Braden (9 yrs) and Mia (5 yrs).

TwinStick

Re: Stock Skid Plate part numbers, bumps stops, etc. help.

Post by TwinStick » Tue Apr 21, 2015 6:38 pm

Any dealer should be able to bring parts & part #'s up on their screen if you have the VIN #. They also can do it over the phone.

User avatar
leo72987
250_Posts
250_Posts
Posts: 492
Joined: Tue Nov 05, 2013 1:38 pm
Location: Ware, MA

Re: Stock Skid Plate part numbers, bumps stops, etc. help.

Post by leo72987 » Wed Apr 22, 2015 8:42 am

I went ahead and looked at my notes

I believe the part# is 52121419AE for the stabilizer skidplate

http://www.moparpartsoverstock.com/p/__ ... 419AE.html


This is were I brought it from before.
2005 Wagon Standard Cab Auto,Bilstein 5100's,White Knuckle Sliders,Dodge Offroad Diff covers,Cooper St Maxx's stock size, Hardwired lockers,Evo manual sway bar disconnect conversion, DT Pro Fab Sway Bar links

User avatar
dodgeman324
50_Posts
50_Posts
Posts: 175
Joined: Tue Jan 20, 2015 9:33 pm
Location: Broken Arrow, Oklahoma

Re: Stock Skid Plate part numbers, bumps stops, etc. help.

Post by dodgeman324 » Wed Apr 22, 2015 9:07 am

Thank you. I'll start there and also check dealership for the bump stops.
Brandon T. - HollyFrontier / US Army Reserves - 13+ years combined Active and Reserves with 1 tour to Iraq in 2009.
2005 Dodge Ram SRT10 Quad Cab, with lots of upgrades = 600+whp/650+wtq.
2012 Chrysler Town and Country Limited, Pentastar V6, Dual DVD.

Former Vehicles:
2005 Dodge Ram PowerWagon, lots of upgrades.
2006 Dodge Ram Quad Cab 4X4 4.7L, White, Black wheels, K&N CAI, 70mm Throttle body, Superships, E-Fan conversion, LED Tails/3rd Brake, HID's
2011 Dodge Journey Mainstreet, Red, Sirius, Push button start, Pentastar.
2007 Dodge Powerwagon, 35inch Nitto's, AEM ColdAir, Flowmaster 40 (Oh I will miss you sooooooo much and I will buy you again when times are right)
2005 Jeep Grand Cherokee, QuadraDrive II, 2 inch lift, 31inch offroad tires. (Will also miss you too, I'll miss all the times a guy in a Wrangler says "You can't do this in THAT!" and then I do it without problems)
2004 Dodge Durango Crew Cab, 4X2, Rhinoliner, K&N Airfilter.
2004 Dodge Ram 1500 Quad Cab, Kenne Bell Supercharger Kit, Custom Headers, Borla exhaust, 508rwhp.
1998 Dodge Ram Quad Cab
1994 Dodge Ram Regular Cab (my first vehicle, besides the hand me down 1988 Ford Ranger)

Married 13 year, Father to Braden (9 yrs) and Mia (5 yrs).

User avatar
leo72987
250_Posts
250_Posts
Posts: 492
Joined: Tue Nov 05, 2013 1:38 pm
Location: Ware, MA

Re: Stock Skid Plate part numbers, bumps stops, etc. help.

Post by leo72987 » Wed Apr 22, 2015 9:12 am

No prob at all! :rockon:
2005 Wagon Standard Cab Auto,Bilstein 5100's,White Knuckle Sliders,Dodge Offroad Diff covers,Cooper St Maxx's stock size, Hardwired lockers,Evo manual sway bar disconnect conversion, DT Pro Fab Sway Bar links

User avatar
Mr.Smith
1000_Posts
1000_Posts
Posts: 1131
Joined: Wed Sep 04, 2013 6:36 pm
Model Year: 2009
Location: Fort Collins, CO.

Re: Stock Skid Plate part numbers, bumps stops, etc. help.

Post by Mr.Smith » Thu Apr 23, 2015 2:45 am

I may have the stock bump stops for the front off my PW...

User avatar
06wagon
250_Posts
250_Posts
Posts: 424
Joined: Sun Jul 01, 2012 2:29 pm
Location: Wapakoneta, Oh

Re: Stock Skid Plate part numbers, bumps stops, etc. help.

Post by 06wagon » Thu Apr 23, 2015 11:59 am

I have the skid plates and rear bump stops....
2006 Power Wagon. "Stockish"
A few parts added and deleted to make it go 300' Getting Farther from Stock!!!
1974 Power Wagon..... Going to get a Gen 3 HEMI swap. Future tow rig for the 06.
2016 Power Wagon Laramie. Delmonico Red. 20x12 Predator II's with 33" toyo's. Firestone air bags. B&W gooseneck. More extras to come....

User avatar
dodgeman324
50_Posts
50_Posts
Posts: 175
Joined: Tue Jan 20, 2015 9:33 pm
Location: Broken Arrow, Oklahoma

Re: Stock Skid Plate part numbers, bumps stops, etc. help.

Post by dodgeman324 » Thu Apr 23, 2015 12:40 pm

You have them as in you'd be willing to sell them to me?
Brandon T. - HollyFrontier / US Army Reserves - 13+ years combined Active and Reserves with 1 tour to Iraq in 2009.
2005 Dodge Ram SRT10 Quad Cab, with lots of upgrades = 600+whp/650+wtq.
2012 Chrysler Town and Country Limited, Pentastar V6, Dual DVD.

Former Vehicles:
2005 Dodge Ram PowerWagon, lots of upgrades.
2006 Dodge Ram Quad Cab 4X4 4.7L, White, Black wheels, K&N CAI, 70mm Throttle body, Superships, E-Fan conversion, LED Tails/3rd Brake, HID's
2011 Dodge Journey Mainstreet, Red, Sirius, Push button start, Pentastar.
2007 Dodge Powerwagon, 35inch Nitto's, AEM ColdAir, Flowmaster 40 (Oh I will miss you sooooooo much and I will buy you again when times are right)
2005 Jeep Grand Cherokee, QuadraDrive II, 2 inch lift, 31inch offroad tires. (Will also miss you too, I'll miss all the times a guy in a Wrangler says "You can't do this in THAT!" and then I do it without problems)
2004 Dodge Durango Crew Cab, 4X2, Rhinoliner, K&N Airfilter.
2004 Dodge Ram 1500 Quad Cab, Kenne Bell Supercharger Kit, Custom Headers, Borla exhaust, 508rwhp.
1998 Dodge Ram Quad Cab
1994 Dodge Ram Regular Cab (my first vehicle, besides the hand me down 1988 Ford Ranger)

Married 13 year, Father to Braden (9 yrs) and Mia (5 yrs).

User avatar
Mr.Smith
1000_Posts
1000_Posts
Posts: 1131
Joined: Wed Sep 04, 2013 6:36 pm
Model Year: 2009
Location: Fort Collins, CO.

Re: Stock Skid Plate part numbers, bumps stops, etc. help.

Post by Mr.Smith » Thu Apr 23, 2015 4:29 pm

Hell I'd give them to you, but I'm searching my garage & can not find them...FAWK! :doh: They must've been tossed out when we were cleaning recently, I'm very sorry to have misspoke. Maybe 06wagon still has his???

User avatar
dodgeman324
50_Posts
50_Posts
Posts: 175
Joined: Tue Jan 20, 2015 9:33 pm
Location: Broken Arrow, Oklahoma

Re: Stock Skid Plate part numbers, bumps stops, etc. help.

Post by dodgeman324 » Thu Apr 23, 2015 4:55 pm

No problem Mr. Smith. I totally know exactly what you mean by accidentally tossed out. Keep enjoying that Colorado for me, I miss it dearly. One day I hope to move back permanently and retire there.
Brandon T. - HollyFrontier / US Army Reserves - 13+ years combined Active and Reserves with 1 tour to Iraq in 2009.
2005 Dodge Ram SRT10 Quad Cab, with lots of upgrades = 600+whp/650+wtq.
2012 Chrysler Town and Country Limited, Pentastar V6, Dual DVD.

Former Vehicles:
2005 Dodge Ram PowerWagon, lots of upgrades.
2006 Dodge Ram Quad Cab 4X4 4.7L, White, Black wheels, K&N CAI, 70mm Throttle body, Superships, E-Fan conversion, LED Tails/3rd Brake, HID's
2011 Dodge Journey Mainstreet, Red, Sirius, Push button start, Pentastar.
2007 Dodge Powerwagon, 35inch Nitto's, AEM ColdAir, Flowmaster 40 (Oh I will miss you sooooooo much and I will buy you again when times are right)
2005 Jeep Grand Cherokee, QuadraDrive II, 2 inch lift, 31inch offroad tires. (Will also miss you too, I'll miss all the times a guy in a Wrangler says "You can't do this in THAT!" and then I do it without problems)
2004 Dodge Durango Crew Cab, 4X2, Rhinoliner, K&N Airfilter.
2004 Dodge Ram 1500 Quad Cab, Kenne Bell Supercharger Kit, Custom Headers, Borla exhaust, 508rwhp.
1998 Dodge Ram Quad Cab
1994 Dodge Ram Regular Cab (my first vehicle, besides the hand me down 1988 Ford Ranger)

Married 13 year, Father to Braden (9 yrs) and Mia (5 yrs).

User avatar
Mr.Smith
1000_Posts
1000_Posts
Posts: 1131
Joined: Wed Sep 04, 2013 6:36 pm
Model Year: 2009
Location: Fort Collins, CO.

Re: Stock Skid Plate part numbers, bumps stops, etc. help.

Post by Mr.Smith » Thu Apr 23, 2015 5:01 pm

Hell yea! Colorado's the best! Come back anytime!(as long as you never wear Sooner's shit)

User avatar
dodgeman324
50_Posts
50_Posts
Posts: 175
Joined: Tue Jan 20, 2015 9:33 pm
Location: Broken Arrow, Oklahoma

Re: Stock Skid Plate part numbers, bumps stops, etc. help.

Post by dodgeman324 » Thu Apr 23, 2015 5:10 pm

Haha, typical Jealousy answer. We all know the Oklahoma Sooners are the best college football team in this country. I will plan to spread my love for OU no matter where I go. I even spread it around in Iraq in 2009. :P
Brandon T. - HollyFrontier / US Army Reserves - 13+ years combined Active and Reserves with 1 tour to Iraq in 2009.
2005 Dodge Ram SRT10 Quad Cab, with lots of upgrades = 600+whp/650+wtq.
2012 Chrysler Town and Country Limited, Pentastar V6, Dual DVD.

Former Vehicles:
2005 Dodge Ram PowerWagon, lots of upgrades.
2006 Dodge Ram Quad Cab 4X4 4.7L, White, Black wheels, K&N CAI, 70mm Throttle body, Superships, E-Fan conversion, LED Tails/3rd Brake, HID's
2011 Dodge Journey Mainstreet, Red, Sirius, Push button start, Pentastar.
2007 Dodge Powerwagon, 35inch Nitto's, AEM ColdAir, Flowmaster 40 (Oh I will miss you sooooooo much and I will buy you again when times are right)
2005 Jeep Grand Cherokee, QuadraDrive II, 2 inch lift, 31inch offroad tires. (Will also miss you too, I'll miss all the times a guy in a Wrangler says "You can't do this in THAT!" and then I do it without problems)
2004 Dodge Durango Crew Cab, 4X2, Rhinoliner, K&N Airfilter.
2004 Dodge Ram 1500 Quad Cab, Kenne Bell Supercharger Kit, Custom Headers, Borla exhaust, 508rwhp.
1998 Dodge Ram Quad Cab
1994 Dodge Ram Regular Cab (my first vehicle, besides the hand me down 1988 Ford Ranger)

Married 13 year, Father to Braden (9 yrs) and Mia (5 yrs).

User avatar
Mr.Smith
1000_Posts
1000_Posts
Posts: 1131
Joined: Wed Sep 04, 2013 6:36 pm
Model Year: 2009
Location: Fort Collins, CO.

Re: Stock Skid Plate part numbers, bumps stops, etc. help.

Post by Mr.Smith » Thu Apr 23, 2015 5:20 pm

Hahahahaha!

cell4soul
50_Posts
50_Posts
Posts: 79
Joined: Sat Aug 16, 2014 9:50 pm
Model Year: 2006
Location: Mesa, AZ

Re: Stock Skid Plate part numbers, bumps stops, etc. help.

Post by cell4soul » Thu Apr 23, 2015 6:02 pm

dodgeman324 wrote:Haha, typical Jealousy answer. We all know the Oklahoma Sooners are the best college football team in this country. I will plan to spread my love for OU no matter where I go. I even spread it around in Iraq in 2009. :P

My wife is a Sooner. She lived in Sperry for years. My house is plastered with Sooner stuff. Boomer.....
2006 Power Wagon, factory rock rails, Carli 3" with Carli control arms and Deaver rear springs, Bilstein shocks with remote reservoir, 2008.5+ steering upgrade, 37" Cooper STT's on stock wheels, Warn wireless winch controller, Dynatrac ball joints........and more to come as the wallet allows.

User avatar
06wagon
250_Posts
250_Posts
Posts: 424
Joined: Sun Jul 01, 2012 2:29 pm
Location: Wapakoneta, Oh

Re: Stock Skid Plate part numbers, bumps stops, etc. help.

Post by 06wagon » Thu Apr 23, 2015 7:57 pm

Yea.... I have them. Skid plate has a small scar from a tree stump. Have the bolts for it also. For the bump stops... Do you need just the bumps, or the spacers too?

Make me an offer..... ;)

I'm thinking shipping might be $10-15???.... And a case of Bud Light is $18...
2006 Power Wagon. "Stockish"
A few parts added and deleted to make it go 300' Getting Farther from Stock!!!
1974 Power Wagon..... Going to get a Gen 3 HEMI swap. Future tow rig for the 06.
2016 Power Wagon Laramie. Delmonico Red. 20x12 Predator II's with 33" toyo's. Firestone air bags. B&W gooseneck. More extras to come....

Post Reply