Board index General Power Wagon Talk

If it's about Power Wagons, this is where it'll go.

Re: Power Wagon Picture Thread

Postby Wilsonsinak » Thu Jun 01, 2017 2:08 pm

2011TXPowerWagon wrote:Those flares look huge!!!! Were they made for the truck or are you doing a custom job?


I have not been able to find a flare made for the 3rd gen Dodges. These are bushwhacker cut out flares for a Ford Super Duty.

They are huge and have opened the wheel wells a lot and will provide a bunch of tire coverage. I really like them. There's a lot of time fitting them but it's worth it.
Wilsonsinak
 
Posts: 14
Joined: Tue May 30, 2017 10:44 am

Re: Power Wagon Picture Thread

Postby 2011TXPowerWagon » Thu Jun 01, 2017 3:18 pm

I think with a big ol tire up in there it will look awesome!!!!
"A government that robs Peter to pay Paul can always depend on the support of Paul."

-George Bernard Shaw
User avatar
2011TXPowerWagon
250_Posts
 
Posts: 490
Joined: Fri Aug 08, 2014 3:07 pm
Location: Edinburg, Texas

Re: Power Wagon Picture Thread

Postby RustyPW » Thu Jun 01, 2017 8:56 pm

Wilsonsinak wrote:
RustyPW wrote:Welcome. With those flairs. Look like you have enough room for 40's. You planning on larger tires?



Yes I do but only if a great deal comes along this summer.

I am planning on building a long arm for the front this winter and I am going to move the front axle forward. I'd like to fit a 43" SX2 under the truck.

How far forward you planning on moving the axle? Couple of things to move would be easy, the others not. The hardest I think would be the steering box, spring buckets, and shock mounts.
PWOC #53
2008 POWER WAGON RC
Mods to the PW; Nerffed Mopar RockRails, Wheel Well Liners, Bushwacker Pocket Fender Flairs, Garvmin dezl 560LMT GPS, Power Wagon Winch Kit, Line X Ultra Bed Liner, PIAA Headlight Bulbs, PIAA 580 Driving Lights (135 watt), PIAA 520 Fog Lights (135 watt), PIAA 520 ATP Off-Road Lights (135 watt), Locker Bypass, Modifed Rockcrusher Diff Covers, Mopar Utility Bed Rails and Tool Box, Warn Winch Wireless Remote Control, "el-cheapo" Inclinometer, Airaid CAI, Winch TPS Bypass, 35" Toyo's, Mopar Spare Tire Lock, 'T' Steering Linkage, Modifed PSC Steering Brace, P3 Brake Controller, Modifed Fusion "mall crawler" rear bumper , PIAA 1500 Back-Up Lights, 1Ton HEMI Tranny Cooler, Leer 100XR Bed Cap, Factory Tow Mirrors, CenterLine Rims 17x9-5.25 BS, Mag-Hytec Tranny Pan, AutoMeter Gauges, PSC Extreme Hydro Assist Steering, Carli Track Bar, Carli Ball-Joints, Dynatrac FreeSpin Hubs, Snorkel, RCV Axles, EBC Pads & Rotors, Aluminess Front Bumper, BIG Pul-Pal, 60" Extreme Hi-lift Jack, and more riggin' equipment, Carli Long Travel Air Bags, Bilstein 7100 Shocks - Carli Valving, MORE STUFF COMIN'.

Moab '10, '12, '14.
Rausch Creek Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17,
Russ NRA Benefactor Member
RustyPW
2000_Posts
 
Posts: 3516
Joined: Thu May 24, 2012 2:23 pm
Location: Brownsville Pa.

Re: Power Wagon Picture Thread

Postby TwinStick » Fri Jun 02, 2017 6:03 pm

He said earlier, that they were for a Ford Super Duty & were cut out flares.

What size are the Boggers ? 35's, 37's or 38's ?
2008 Red QC PW G56. No lift yet, stock size tires. It pulls a 2016 Starcraft AR One Extreme, 3500 lbs.
Load Pro 35 helper springs. 2015 A.R.E. MX Series custom cap. PCP front diff cover protector. Mag-Hytec 6 qt rear diff cover. K&N replacement air filter only. Dual grounded throttle body. Winch TPC bypass. Fab Four rear bumper. DURA BAK lined rocker protection. And a bunch of new front end stuff.

G-56 Gear ratios: 1st) 6.29:1 2nd) 3.48:1 3rd) 2.10:1 4th) 1.38:1 5th) 1.0:1 6th) 0.79:1 Rev 6.29:1 --- = 78.01613:1 Crawl Ratio
-------------------------5.94:1--------3.28:1-------1.98:1-------1.31:1-------1.0:1-------0.74:1-----5.42:1 ---- = 73.675:1
545RFE----------------3.0:1---------1.67:1--------1.0:1--------0.75:1-------0.67:1------------------3.0:1 -------=37.21:1

2013+ 32.47 crawl ratio...............Can you see the trend ??????????????
TwinStick
2000_Posts
 
Posts: 3733
Joined: Mon May 28, 2012 5:58 pm

Re: Power Wagon Picture Thread

Postby Wilsonsinak » Fri Jun 02, 2017 6:07 pm

TwinStick wrote:He said earlier, that they were for a Ford Super Duty & were cut out flares.

What size are the Boggers ? 35's, 37's or 38's ?


I'd like to move it 2-3 inches forward.

37x13's on it now.
Wilsonsinak
 
Posts: 14
Joined: Tue May 30, 2017 10:44 am

Re: Power Wagon Picture Thread

Postby Colibri » Fri Jun 02, 2017 11:17 pm

Giant boggers are to Alaskans what ranch hand bumpers are to Texans lol. Truck looks great, it's going to be an absolute beast by the sound of things :rockon: please do a build thread
Colibri
1000_Posts
 
Posts: 1230
Joined: Mon Jun 08, 2015 3:44 pm

Re: Power Wagon Picture Thread

Postby jerseydevil » Mon Jun 05, 2017 1:47 am

I love that front Bumper and grill guard.. what kind and where did you get it?
how many lights can it handle?
a newbie .. My PW is still mostly stock with some extras on the front suspension to get rid of a very vicious Death Wobble... Still have it any help would BE great..... maybe Lemon Lawing it soon.. I'll only do it if I can get a New one.. PW for life
User avatar
jerseydevil
 
Posts: 1
Joined: Wed Mar 08, 2017 9:28 pm
Location: Old Bridge New Jersey

Re: Power Wagon Picture Thread

Postby KSUperDuty » Sun Jun 11, 2017 4:38 pm

First Post. New 2017 Tradesman with the PW package. Such a fun pickup!!

IMG_0502.JPG


IMG_0501.JPG
KSUperDuty
 
Posts: 3
Joined: Sun Jun 11, 2017 4:14 pm

Re: Power Wagon Picture Thread

Postby olyelr » Sun Jun 11, 2017 9:06 pm

KSUperDuty wrote:First Post. New 2017 Tradesman with the PW package. Such a fun pickup!!

IMG_0502.JPG


IMG_0501.JPG



Nice truck, and welcome to the :winchmob:
2016 Ram Power Wagon Laramie - Granite Crystal Metallic - Ramboxes
- A virgin, other than White Knuckle sliders... and lots of Fluid Film -
User avatar
olyelr
2000_Posts
 
Posts: 2304
Joined: Sun Dec 07, 2014 8:00 pm
Location: Kewadin, MI

Re: Power Wagon Picture Thread

Postby MikeKey » Mon Jun 12, 2017 8:05 am

KSUperDuty wrote:First Post. New 2017 Tradesman with the PW package. Such a fun pickup!!


Sweet truck and sweet surplus hardware. Going to be building an expo trailer?
2015 Power Wagon Laramie - Moab Tested
[Build Thread] [Instagram]
[Power Wagons in Moab]
User avatar
MikeKey
1000_Posts
 
Posts: 1250
Joined: Fri Mar 25, 2016 9:23 am
Location: Boise, Idaho

Re: Power Wagon Picture Thread

Postby Low_Sky » Mon Jun 12, 2017 11:30 am

Move that PWagon out of the way and show us that LMTV!


Sent from my iPhone using Tapatalk
John

Alaska
2015 PW Laramie w/RamBox
Custom rock sliders
User avatar
Low_Sky
250_Posts
 
Posts: 452
Joined: Fri May 01, 2015 5:12 pm
Location: Los Anchorage, Alaska

Re: Power Wagon Picture Thread

Postby KSUperDuty » Mon Jun 12, 2017 5:04 pm

I guess the M1079 is a PW of sorts, and yes, I do plan on building an expo trailer out of the M1101.

IMG_1059.JPG
KSUperDuty
 
Posts: 3
Joined: Sun Jun 11, 2017 4:14 pm

Re: Power Wagon Picture Thread

Postby RustyPW » Mon Jun 12, 2017 8:39 pm

KSUperDuty wrote:I guess the M1079 is a PW of sorts, and yes, I do plan on building an expo trailer out of the M1101.

IMG_1059.JPG

I was looking at these. Was wondering about the axles under them. And if you can put/get lockers for them. Here's the video that got me interested in them. :lol:
phpBB [video]

Clickable link for Tapatalk

PWOC #53
2008 POWER WAGON RC
Mods to the PW; Nerffed Mopar RockRails, Wheel Well Liners, Bushwacker Pocket Fender Flairs, Garvmin dezl 560LMT GPS, Power Wagon Winch Kit, Line X Ultra Bed Liner, PIAA Headlight Bulbs, PIAA 580 Driving Lights (135 watt), PIAA 520 Fog Lights (135 watt), PIAA 520 ATP Off-Road Lights (135 watt), Locker Bypass, Modifed Rockcrusher Diff Covers, Mopar Utility Bed Rails and Tool Box, Warn Winch Wireless Remote Control, "el-cheapo" Inclinometer, Airaid CAI, Winch TPS Bypass, 35" Toyo's, Mopar Spare Tire Lock, 'T' Steering Linkage, Modifed PSC Steering Brace, P3 Brake Controller, Modifed Fusion "mall crawler" rear bumper , PIAA 1500 Back-Up Lights, 1Ton HEMI Tranny Cooler, Leer 100XR Bed Cap, Factory Tow Mirrors, CenterLine Rims 17x9-5.25 BS, Mag-Hytec Tranny Pan, AutoMeter Gauges, PSC Extreme Hydro Assist Steering, Carli Track Bar, Carli Ball-Joints, Dynatrac FreeSpin Hubs, Snorkel, RCV Axles, EBC Pads & Rotors, Aluminess Front Bumper, BIG Pul-Pal, 60" Extreme Hi-lift Jack, and more riggin' equipment, Carli Long Travel Air Bags, Bilstein 7100 Shocks - Carli Valving, MORE STUFF COMIN'.

Moab '10, '12, '14.
Rausch Creek Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17,
Russ NRA Benefactor Member
RustyPW
2000_Posts
 
Posts: 3516
Joined: Thu May 24, 2012 2:23 pm
Location: Brownsville Pa.

Re: Power Wagon Picture Thread

Postby Colibri » Tue Jun 13, 2017 7:18 am

That same video got me thinking of getting one too lol. Be careful with the military vehicles, they're an even more insidious addiction than power wagons!
Colibri
1000_Posts
 
Posts: 1230
Joined: Mon Jun 08, 2015 3:44 pm

Re: Power Wagon Picture Thread

Postby KSUperDuty » Tue Jun 13, 2017 8:41 am

The LMTV has been good to me. No nightmare stories. I bought it off Gov Planet at Ft Hood, and shipped it to my folks place in Central Ks. I changed all the filters and fluids in the axles, hubs, engine, transmission, etc, and then I drove it 500 miles the rest of the way home. I did put tires on it and I replaced the air dryer, but that's it. It's a ton of fun to drive, and I'm building the box out as a camper. Lockers are available, but I haven't done that yet. If this thing gets stuck enough, or there's an obstacle I have to go over that requires lockers lockers, I think I'll have bigger problems. Consider me addicted....
KSUperDuty
 
Posts: 3
Joined: Sun Jun 11, 2017 4:14 pm

Re: Power Wagon Picture Thread

Postby Will » Thu Jun 15, 2017 4:51 pm

I really need to do something with these faded ass flares...Image
2010 with 37" hooves, controlled by numerous Thuren parts and Thuren Custom King 2.5's
viewtopic.php?f=13&t=2333

I only do what the majority of the 4 voices in my head tell me to. In most cases, I ignore two of them because one doesn't speak English, and I suspect the other is talking to someone else.
User avatar
Will
2000_Posts
 
Posts: 2492
Joined: Mon Jan 27, 2014 6:16 am

Re: Power Wagon Picture Thread

Postby Will » Thu Jun 15, 2017 4:52 pm

Double post..
Last edited by Will on Fri Jun 16, 2017 7:45 am, edited 1 time in total.
2010 with 37" hooves, controlled by numerous Thuren parts and Thuren Custom King 2.5's
viewtopic.php?f=13&t=2333

I only do what the majority of the 4 voices in my head tell me to. In most cases, I ignore two of them because one doesn't speak English, and I suspect the other is talking to someone else.
User avatar
Will
2000_Posts
 
Posts: 2492
Joined: Mon Jan 27, 2014 6:16 am

Re: Power Wagon Picture Thread

Postby Bill2014 » Fri Jun 16, 2017 5:42 am

That's twice you've said that, now you need to act :lol:
2014 Power Wagon Laramie
Titan V5 2.5" Receiver Pintle Hook
Warn wireless winch controller
.188" DOM White Knuckle Rock Sliders
Locker Bypass

Moab 2006
User avatar
Bill2014
500_Posts
 
Posts: 608
Joined: Fri May 09, 2014 7:03 pm
Location: Northern NY

Re: Power Wagon Picture Thread

Postby awdanthony » Sat Jun 24, 2017 1:16 pm

Well, decided to trade in the 13. Two weeks with the new truck and I absolutely love it and do not regret moving on from the old one.
Already attached sliders too. Well worth it, wished I had them in Moab.
Image
2017 Power Wagon L&L pack with some extras. In desperate need of 35s.
User avatar
awdanthony
 
Posts: 44
Joined: Tue Feb 17, 2015 10:00 pm
Location: Denver Colorado

Re: Power Wagon Picture Thread

Postby Colibri » Sat Jun 24, 2017 3:13 pm

Looking good! Congratulations on the new truck, red ones go faster :rockon:
Colibri
1000_Posts
 
Posts: 1230
Joined: Mon Jun 08, 2015 3:44 pm

Re: Power Wagon Picture Thread

Postby Pit Slave » Sat Jun 24, 2017 4:34 pm

Colibri wrote:Looking good! Congratulations on the new truck, red ones go faster :rockon:

True ;)

Yeah, I smoked 'em, sometimes you just gotta #sendit
Nothing's more dead than a horse in a glue bottle.Image

There are two ways to conquer and enslave a nation.
One is by the sword. The other is by debt.
John Adams - 1826


I guess you could say I'm a bit off center.....:D
User avatar
Pit Slave
Vendor
 
Posts: 1413
Joined: Thu May 17, 2012 9:12 am
Location: Sandy, Utah.. Moab, Jersey, Space Station, Baja.....

Re: Power Wagon Picture Thread

Postby Bill2014 » Sat Jun 24, 2017 5:37 pm

Go Team RED! :cheers:
2014 Power Wagon Laramie
Titan V5 2.5" Receiver Pintle Hook
Warn wireless winch controller
.188" DOM White Knuckle Rock Sliders
Locker Bypass

Moab 2006
User avatar
Bill2014
500_Posts
 
Posts: 608
Joined: Fri May 09, 2014 7:03 pm
Location: Northern NY

Re: Power Wagon Picture Thread

Postby awdanthony » Sat Jun 24, 2017 6:20 pm

Well, this one is definitely quicker than my 5.7!
2017 Power Wagon L&L pack with some extras. In desperate need of 35s.
User avatar
awdanthony
 
Posts: 44
Joined: Tue Feb 17, 2015 10:00 pm
Location: Denver Colorado

Re: Power Wagon Picture Thread

Postby 13BlkPowerWagon » Sun Jun 25, 2017 10:23 am

Will wrote:I really need to do something with these faded ass flares...Image


Mine looked the same... Walmart sells this stuff called Wipe New. I was skeptical... But, after 10 months, they still look pretty darn black. Even helped remove/hide some of the oxidation on the headlights. For the $13 or whatever it costs, it was well worth it. Give it a shot.
13BlkPowerWagon
 
Posts: 33
Joined: Sat Feb 04, 2017 5:07 pm

Re: Power Wagon Picture Thread

Postby Mule » Mon Jun 26, 2017 12:29 pm

Image
User avatar
Mule
250_Posts
 
Posts: 293
Joined: Sat Nov 22, 2014 1:29 am
Location: Rocky Mtns

PreviousNext

Return to Power Wagon Talk

Who is online

Users browsing this forum: No registered users and 5 guests