New Carli Stablizer Sneak Peak!
Moderator: Skyd Ram
New Carli Stablizer Sneak Peak!
Another awesome product sneak peak from the wizards at Carli Suspension!
Fresh from the lab!
This is a prototype stabilizer shock that Sage has been working. It uses a stainless steel body, anodized aluminum mounts with FK rod ends and a nitride hardened steel shaft. This will be a Carli exclusive part that offers the ultimate in corrosion resistance. This new part will have to see some extensive testing before Carli will stamp it done.
Pricing won't be much more that the Bilstein based clear powdercoated stabilizers that are already offered. We'll keep you posted as to when these will be available although it won't be very soon.
Fresh from the lab!
This is a prototype stabilizer shock that Sage has been working. It uses a stainless steel body, anodized aluminum mounts with FK rod ends and a nitride hardened steel shaft. This will be a Carli exclusive part that offers the ultimate in corrosion resistance. This new part will have to see some extensive testing before Carli will stamp it done.
Pricing won't be much more that the Bilstein based clear powdercoated stabilizers that are already offered. We'll keep you posted as to when these will be available although it won't be very soon.
-
- 50_Posts
- Posts: 68
- Joined: Wed May 23, 2012 12:42 am
Re: New Carli Stablizer Sneak Peak!
Very cool. Thanks for the preview George. Sounds like it will be durable.
Definitely a good idea...especially for those of us with stabilizers that will see all kinds of winter salt, lava rock and grime.
Definitely a good idea...especially for those of us with stabilizers that will see all kinds of winter salt, lava rock and grime.
2012 Power Wagon ST
"Born at the junction of form & function"
Carli suspension/steering/Bilstein 5100s|Ranch Hand bumpers/headache rack/rails|Factory spray in bedliner|35/12.5/17 BFG KM2s on factory alloys|Lightforce 240 Blitz HIDs|"chassis cab auxiliary switch bank mod"|Highway Products toolbox|Cobra 75 CB|PROUD AMERICAN FLAG
"Born at the junction of form & function"
Carli suspension/steering/Bilstein 5100s|Ranch Hand bumpers/headache rack/rails|Factory spray in bedliner|35/12.5/17 BFG KM2s on factory alloys|Lightforce 240 Blitz HIDs|"chassis cab auxiliary switch bank mod"|Highway Products toolbox|Cobra 75 CB|PROUD AMERICAN FLAG
Re: New Carli Stablizer Sneak Peak!
Yeah,2012 PW ST wrote:Very cool. Thanks for the preview George. Sounds like it will be durable.
Definitely a good idea...especially for those of us with stabilizers that will see all kinds of winter salt, lava rock and grime.
This is a good starting point for a possible future for a stainless shock line up. But like all things Carli it will have to be tested and proven before any steps are taken towards production.
Re: New Carli Stablizer Sneak Peak!
They would corner the market in my neck of the woods. The rust belt people would sure like a nice shinny SS shock, to look & perform like new for more than 1 year.
-
- 250_Posts
- Posts: 429
- Joined: Mon May 21, 2012 2:43 pm
- Location: New Bern/Wilmington, NC
Re: New Carli Stablizer Sneak Peak!
Looks awesome. When my factory stabilizer goes out I'll be upgrading to this
2006 QC PW G56
Suspension: 3" Thuren Diesel coils, Carli Progressive leaf springs, Thuren DYSKO bumpstops, Thuren control arms, Thuren tracbar, Thuren draglink, King 2.5" remote reservoir front shocks/2.5" King DBL bypass rear shocks, limit straps, factory swaybar end links extended 2",
Engine/Drivetrain: Airaid full intake, Airflow snorkel, Magnaflow y-pipe, 3" Flowmaster Super 44, Jet 180 t-stat, locker bypass. Carli balljoints. greasable front u-joints, Gorilla Juice in the G56, Royal Purple 75W-140 in the diffs, Shell Rotella 5W-40 in the engine w/ oversize K&N filter.
Body/Appearance: Go Recon super white cab lights, Retro Solutions 55W 6000K HID kit for headlights/fogs and projector retro'd headlight, Carli front diff guard, Rockcrusher rear diff guard, lots of pinstriping & some dents
Interior: 12" JL Audio sub in custom box w/ adjustable bass knob and 500W JL Audio amplifier, headrest gun sling, CB radio
Suspension: 3" Thuren Diesel coils, Carli Progressive leaf springs, Thuren DYSKO bumpstops, Thuren control arms, Thuren tracbar, Thuren draglink, King 2.5" remote reservoir front shocks/2.5" King DBL bypass rear shocks, limit straps, factory swaybar end links extended 2",
Engine/Drivetrain: Airaid full intake, Airflow snorkel, Magnaflow y-pipe, 3" Flowmaster Super 44, Jet 180 t-stat, locker bypass. Carli balljoints. greasable front u-joints, Gorilla Juice in the G56, Royal Purple 75W-140 in the diffs, Shell Rotella 5W-40 in the engine w/ oversize K&N filter.
Body/Appearance: Go Recon super white cab lights, Retro Solutions 55W 6000K HID kit for headlights/fogs and projector retro'd headlight, Carli front diff guard, Rockcrusher rear diff guard, lots of pinstriping & some dents
Interior: 12" JL Audio sub in custom box w/ adjustable bass knob and 500W JL Audio amplifier, headrest gun sling, CB radio
Re: New Carli Stablizer Sneak Peak!
They've got a few in testing right now. One is on a truck that spends a lot of time on the beach. The other was tied to rope and tossed into the ocean an tied to the pier. So far the stainless body and the shaft are holding up great. Obviously the bearings on the ends are showing some signs of corrosion but that is generally combated with a little squirt of WD40 from time to time.
Re: New Carli Stablizer Sneak Peak!
Skyd Ram - Here is a question: Is there any way that they could make a SSteel bolt type deal with the taper, so this could be used on trucks like mine with the old Y style steering ? I am really digging these but they prob wont work on my truck.
Re: New Carli Stablizer Sneak Peak!
Unfortunately even with the correct mounting adaptors, the attachment points on the older steering setup is a bit too short for a stabilizer like this as well as the Bilstein 7100 that they currently use.TwinStick wrote:Skyd Ram - Here is a question: Is there any way that they could make a SSteel bolt type deal with the taper, so this could be used on trucks like mine with the old Y style steering ? I am really digging these but they prob wont work on my truck.
Re: New Carli Stablizer Sneak Peak!
Knowing this, the factory replacement part will probably be $500 !!!
-
- 2000_Posts
- Posts: 5431
- Joined: Thu May 24, 2012 4:23 pm
- Model Year: 2008
- Location: Brownsville Pa.
Re: New Carli Stablizer Sneak Peak!
About $160. That's what I paid for mine when I did the 'T' linkage up grade.TwinStick wrote: Knowing this, the factory replacement part will probably be $500 !!!
PWOC #53
2008 POWER WAGON RC
My build thread. http://forum.powerwagonregistry.org/vie ... =13&t=2826
Moab '09, '10, '12, '14.
Rausch Creek - Summer '10, Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18, Summer '20, Summer '22,
AOAA Summer '19.
Russ
NRA - Benefactor, Golden Eagle.
2008 POWER WAGON RC
My build thread. http://forum.powerwagonregistry.org/vie ... =13&t=2826
Moab '09, '10, '12, '14.
Rausch Creek - Summer '10, Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18, Summer '20, Summer '22,
AOAA Summer '19.
Russ
NRA - Benefactor, Golden Eagle.
- AceMan
- Site Admin
- Posts: 1545
- Joined: Tue May 22, 2012 11:27 am
- Model Year: 2006
- Location: Delaware County, PA
- Contact:
Re: New Carli Stablizer Sneak Peak!
So does that mean we should be spraying WD40 on our current Carli bearings?Skyd Ram wrote:They've got a few in testing right now. One is on a truck that spends a lot of time on the beach. The other was tied to rope and tossed into the ocean an tied to the pier. So far the stainless body and the shaft are holding up great. Obviously the bearings on the ends are showing some signs of corrosion but that is generally combated with a little squirt of WD40 from time to time.
Sent from my Galaxy Nexus using Xparent SkyBlue Tapatalk 2
Did you ever notice that after Monday and Tuesday the calendar says "WTF"?
KB1ACE - Kilo-Bravo-One-Alpha-Charlie-Echo
Power Wagon Owner's Club #110
Black '06 PW QC
Auto, REC Nav/Sat UConnect, Reverse cam, MyGig v2 Lockpick, adj pedals, Tow mirrors, aftermarket heated seats.
Mods: Mopar Rock Rails, Carr steps (what's left of them), Toyo MT 35x12.5x17, Mopar 8.5 "T"-Linkage, Carli Trackbar (frameside 16mm bolt), King 2.5 Reservoir shocks, Carli Progressive coils, Carli Front Diff Protector, Rockcrusher rear diff, Carli Low Mount Damper, KC 55 watt rear floods w/Defiant bracket, RetroSolutions 12W LED rev & brake lights, EBC Slotted/Dimpled Rotors & Yellow Stuff Pads, 4th Gen Steering Box, Spicer axle U-joints, 4G DTProfab Steering brace ground 3/8" offset to fit my 3G 2006 with a 4G box.
Sitting in Garage: Ram SRT10 A-Pillar.
KB1ACE - Kilo-Bravo-One-Alpha-Charlie-Echo
Power Wagon Owner's Club #110
Black '06 PW QC
Auto, REC Nav/Sat UConnect, Reverse cam, MyGig v2 Lockpick, adj pedals, Tow mirrors, aftermarket heated seats.
Mods: Mopar Rock Rails, Carr steps (what's left of them), Toyo MT 35x12.5x17, Mopar 8.5 "T"-Linkage, Carli Trackbar (frameside 16mm bolt), King 2.5 Reservoir shocks, Carli Progressive coils, Carli Front Diff Protector, Rockcrusher rear diff, Carli Low Mount Damper, KC 55 watt rear floods w/Defiant bracket, RetroSolutions 12W LED rev & brake lights, EBC Slotted/Dimpled Rotors & Yellow Stuff Pads, 4th Gen Steering Box, Spicer axle U-joints, 4G DTProfab Steering brace ground 3/8" offset to fit my 3G 2006 with a 4G box.
Sitting in Garage: Ram SRT10 A-Pillar.
- AceMan
- Site Admin
- Posts: 1545
- Joined: Tue May 22, 2012 11:27 am
- Model Year: 2006
- Location: Delaware County, PA
- Contact:
Re: New Carli Stablizer Sneak Peak!
LOL! Can we use that on the exposed tie rod and draglink threads?TwinStick wrote: Nope, Fluid Film !!! LOL
Re: New Carli Stablizer Sneak Peak!
If you live anywhere that uses salt on the roads in the winter or you live near the ocean I would spray everything made out of metal with Fluid Film, WD40, Etc.........AceMan wrote:LOL! Can we use that on the exposed tie rod and draglink threads?TwinStick wrote: Nope, Fluid Film !!! LOL
Re: New Carli Stablizer Sneak Peak!
Yes you can. It is Lanolin based. You guys REALLY need to read up on that shit. Good stuff. Won't harm rubber or plastic or o-ringsAceMan wrote:LOL! Can we use that on the exposed tie rod and draglink threads?TwinStick wrote: Nope, Fluid Film !!! LOL
http://www.fluid-film.com/
http://www.theruststore.com/Fluid-Film- ... 4AodmQ0Apw
- AceMan
- Site Admin
- Posts: 1545
- Joined: Tue May 22, 2012 11:27 am
- Model Year: 2006
- Location: Delaware County, PA
- Contact:
Re: New Carli Stablizer Sneak Peak!
Thanks, gentlemen. With all the salt we get in MI, NY, PA, and the rest of the northern states and Canada, we need a 5 gallon bucket of that stuff.
I'm ordering 2 spray cans.
Sent from my Galaxy Nexus using Xparent SkyBlue Tapatalk 2
I'm ordering 2 spray cans.
Sent from my Galaxy Nexus using Xparent SkyBlue Tapatalk 2
Did you ever notice that after Monday and Tuesday the calendar says "WTF"?
KB1ACE - Kilo-Bravo-One-Alpha-Charlie-Echo
Power Wagon Owner's Club #110
Black '06 PW QC
Auto, REC Nav/Sat UConnect, Reverse cam, MyGig v2 Lockpick, adj pedals, Tow mirrors, aftermarket heated seats.
Mods: Mopar Rock Rails, Carr steps (what's left of them), Toyo MT 35x12.5x17, Mopar 8.5 "T"-Linkage, Carli Trackbar (frameside 16mm bolt), King 2.5 Reservoir shocks, Carli Progressive coils, Carli Front Diff Protector, Rockcrusher rear diff, Carli Low Mount Damper, KC 55 watt rear floods w/Defiant bracket, RetroSolutions 12W LED rev & brake lights, EBC Slotted/Dimpled Rotors & Yellow Stuff Pads, 4th Gen Steering Box, Spicer axle U-joints, 4G DTProfab Steering brace ground 3/8" offset to fit my 3G 2006 with a 4G box.
Sitting in Garage: Ram SRT10 A-Pillar.
KB1ACE - Kilo-Bravo-One-Alpha-Charlie-Echo
Power Wagon Owner's Club #110
Black '06 PW QC
Auto, REC Nav/Sat UConnect, Reverse cam, MyGig v2 Lockpick, adj pedals, Tow mirrors, aftermarket heated seats.
Mods: Mopar Rock Rails, Carr steps (what's left of them), Toyo MT 35x12.5x17, Mopar 8.5 "T"-Linkage, Carli Trackbar (frameside 16mm bolt), King 2.5 Reservoir shocks, Carli Progressive coils, Carli Front Diff Protector, Rockcrusher rear diff, Carli Low Mount Damper, KC 55 watt rear floods w/Defiant bracket, RetroSolutions 12W LED rev & brake lights, EBC Slotted/Dimpled Rotors & Yellow Stuff Pads, 4th Gen Steering Box, Spicer axle U-joints, 4G DTProfab Steering brace ground 3/8" offset to fit my 3G 2006 with a 4G box.
Sitting in Garage: Ram SRT10 A-Pillar.
Re: New Carli Stablizer Sneak Peak!
***UPDATE***TwinStick wrote:Skyd Ram - Here is a question: Is there any way that they could make a SSteel bolt type deal with the taper, so this could be used on trucks like mine with the old Y style steering ? I am really digging these but they prob wont work on my truck.
Carli now has this stabilizer available for the trucks with the older Y-style steering. It runs $299 and comes with a new anodized billet clamp and hardware. We are running one on Tommy's (employee) '08 Hemi 2500 with great success!
http://www.8lugtruckgear.com/Dodge-Susp ... -p836.html
George