Board index General Member Builds

Start your thread and show everyone your build out.

Power Wagon Parts

Postby TwinStick » Sat Jun 02, 2012 9:57 pm

I'm starting this thread as a one stop area for Power Wagon Specific parts, part #'s & links where to get them, to save us money over the stealership----& other cool off-road stuff that us Power Wagon owners would use. Just a few examples of PWS parts: disconnecting swaybar, swaybar end links, front & rear locker actuators, blank actuator plugs for hardwired locker bypass, manual disconnect for swaybar, etc, etc. Examples of other cool off-road stuff: waterproof aux circut board, aux battery stuff, CB or other radios, antennas, switches, wireless winch remotes, recovery stuff, the HD red snatch blocks that came with the winch kit, etc, etc.

Please try to keep chatting to a minimum in this thread if possible. Description in bold print & a link. Thanks. Hope this works out. :cheers:
2008 Red QC PW G56. No lift yet, stock size tires. It pulls a 2016 Starcraft AR One Extreme, 3500 lbs.
Load Pro 35 helper springs. 2015 A.R.E. MX Series custom cap. PCP front diff cover protector. Mag-Hytec 6 qt rear diff cover. K&N replacement air filter only. Dual grounded throttle body. Winch TPC bypass. Fab Four rear bumper. DURA BAK lined rocker protection. And a bunch of new front end stuff.

G-56 Gear ratios: 1st) 6.29:1 2nd) 3.48:1 3rd) 2.10:1 4th) 1.38:1 5th) 1.0:1 6th) 0.79:1 Rev 6.29:1 --- = 78.01613:1 Crawl Ratio
-------------------------5.94:1--------3.28:1-------1.98:1-------1.31:1-------1.0:1-------0.74:1-----5.42:1 ---- = 73.675:1
545RFE----------------3.0:1---------1.67:1--------1.0:1--------0.75:1-------0.67:1------------------3.0:1 -------=37.21:1

2013+ 32.47 crawl ratio...............Can you see the trend ??????????????
TwinStick
2000_Posts
 
Posts: 3731
Joined: Mon May 28, 2012 5:58 pm


Re: Power Wagon Parts

Postby trk4sale » Sun Jun 03, 2012 7:00 am

You don't have to order the sway bar disconnect from Australia,.
Get it here for less $. (I know it fits the Power wagon because that's my smartbar in the picture)
http://www.offroadevolution.com/store/p ... O-NOLIMITS
Preview



2005 white Q.C. Power Wagon #1716
AEM Brute Force intake
Gibson CAT back exhaust
Super Chips Flashpac Tuner
Wet Okole seat covers
35" Nitto Trail Grappler Tires
Line-X bed coating
Trac Rac Sliding Lumber Rack
Dual Batteries w/ Hellroaring Technologies Isolator/Combiner
Extreme Outback Magnum on board air compressor
H2 rims
trk4sale
50_Posts
 
Posts: 91
Joined: Thu May 24, 2012 7:01 am

Re: Power Wagon Parts

Postby TwinStick » Sun Jun 03, 2012 9:55 pm

Good site for cool Off-Road accessories. Including the big red 30,000 lb WARN Power Wagon snatchblock.

http://www.xtremeterrain.com/search.asp ... &log=false

http://www.xtremeterrain.com/warnsnatch ... acity.aspx

One that looks just like it, but not red & not WARN but MUCH cheaper.

http://store.wastewatersupplies.com/cab ... locks.html
2008 Red QC PW G56. No lift yet, stock size tires. It pulls a 2016 Starcraft AR One Extreme, 3500 lbs.
Load Pro 35 helper springs. 2015 A.R.E. MX Series custom cap. PCP front diff cover protector. Mag-Hytec 6 qt rear diff cover. K&N replacement air filter only. Dual grounded throttle body. Winch TPC bypass. Fab Four rear bumper. DURA BAK lined rocker protection. And a bunch of new front end stuff.

G-56 Gear ratios: 1st) 6.29:1 2nd) 3.48:1 3rd) 2.10:1 4th) 1.38:1 5th) 1.0:1 6th) 0.79:1 Rev 6.29:1 --- = 78.01613:1 Crawl Ratio
-------------------------5.94:1--------3.28:1-------1.98:1-------1.31:1-------1.0:1-------0.74:1-----5.42:1 ---- = 73.675:1
545RFE----------------3.0:1---------1.67:1--------1.0:1--------0.75:1-------0.67:1------------------3.0:1 -------=37.21:1

2013+ 32.47 crawl ratio...............Can you see the trend ??????????????
TwinStick
2000_Posts
 
Posts: 3731
Joined: Mon May 28, 2012 5:58 pm

Re: Power Wagon Parts

Postby Ken G. » Thu Jun 07, 2012 12:58 pm

Saw this on Truck and Winch's website. Don't know if it's as good as Amsteel Blue or Viking, but looks like a pretty good deal.

http://truckandwinch.com/tuff-stuff-syn ... -92ft.html
"People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf." - George Orwell

2011 PW. AFE Full Metal Power Stage 2 CAI. Readylift T6 Billet leveling kit. Yakima Load Warrior bed rack on crossbars (reinforced). Hi-Lift w/ Baja-base, Powertank PT-10 w/ Monster Regulator, shovel, and axe mounted on bed rack. Radioshack CB. 5 x 35" Nitto Trail Grappler MTs on PW wheels. UWS truck bed box with tools and recovery gear. Bed-mounted Billet 4x4 Fuel and H2O Jerry cans w/carriers. Rausch Creek Limited Edition Modified Ranch Hand Grille Guard (currently undergoing radical surgery and modification). Carli front diff guard. Custom rock sliders and custom rear diff skid plate fabbed by Iron Pig Off Road.
User avatar
Ken G.
50_Posts
 
Posts: 238
Joined: Wed May 30, 2012 9:27 am
Location: Stafford, Virginia

Re: Power Wagon Parts

Postby Powerwagonmark » Fri Jun 08, 2012 12:30 pm

2008 Dodge POWER WAGON
Power Wagon= 12000lb Warn winch, Electronic Disconnecting Swaybar, Front and rear lockers, 4.56 gears

Upgrades= BDS 4" long arm lift, JBA Shorty headers, Custom MBRP Y-Pipe, MBRP Custom exhaust, Stainless Steel front and rear brake lines, Thuren Adjustable track bar with Fox Racing Steering Stabilizer, Thuren/Atlas custom leafs, Thuren 6" Coil Springs, Thuren Adjustable Shackles, Redhead steering box, Carli front diff guard, Airflow Snorkel, Vent Tubes Extended, Custom Rock Rails(made by me), Custom rear tube bumper(made by me), Rockcrusher rear diff guard, Bushwacker pocket flares, Trimmed fenders, DT Profab Steering Box Brace, Borgeson steering shaft, 1 Ton Tranny cooler, Mickey Thompson 17x9 Sidebiter Wheels, Pitbull Rockers 37x12.5x17, Road Armour front bumper trimmed for extra clearance with lightbar and 4 KC lights and 4 Piaa's, Procomp Explorer Lights mounted on backrack, Wireless winch remote, Tints, clear cab lights, WeatherTech Floor Mats, HighLift Jack, Tool box, RBP gas cover(piece of junk). Line-xed from head to toe. More straps, shackles and pulleys than I actually need.
User avatar
Powerwagonmark
50_Posts
 
Posts: 190
Joined: Fri May 25, 2012 1:56 pm
Location: Ontario, Canada

Re: Power Wagon Parts

Postby ldgregory » Sat Jun 09, 2012 11:08 pm

Power Wagon frame vs. Ram 2500 frame part number

PW frame is part number 55398868AC and the frame for the 2500 4x4 RAMs (gas and diesel) is 55398813AC.

Just throwing that out there.
2005 Dodge Power Wagon #9-05-0536

Join the Power Wagon Registry

Mods: 35" BFG KM2s, Locker Bypass, Blacked Out Cab Lights & 3rd Brake Light, Airhorns, Custom headache / rotating light rack, Interceptor Bug Deflector w/Eyebrows, Lund in-channel Vent Visors, UbiquiRack, Mounted shovel and axe in bed with Quick Fist clamps, Silverstar replacements for fogs and driving lights, Hella 500s behind the grill, Inclinometer, Mopar rock rails (didn't have them when I bought it), 1500W inverter with secondary battery in bed, tinted windows, chopped muffler.

Next Mods:
Wetsuit/BC drying hanger, high idle, black badges
User avatar
ldgregory
Site Admin
 
Posts: 630
Joined: Wed May 16, 2012 6:29 am
Location: Albuquerque, NM

Re: Power Wagon Parts

Postby azracer » Sun Jun 10, 2012 1:19 am

ldgregory wrote:Power Wagon frame vs. Ram 2500 frame part number

PW frame is part number 55398868AC and the frame for the 2500 4x4 RAMs (gas and diesel) is 55398813AC.

Just throwing that out there.


Does anyone know what exactly is different?
I have suspicions that is is just mounting holes and hardware for the skid plates and such but I honestly don't know.
My build 2009 3G
http://forum.powerwagonregistry.org/viewtopic.php?f=13&t=2305

Beginners reading list:
1) Quigley’s Anglo-American Establishment – 354 pages http://www.carrollquigley.net/pdf/the_a ... shment.pdf
2) Wall Street and the Bolshevik Revolution by Antony C. Sutton 165 pages https://www.voltairenet.org/IMG/pdf/Sut ... tion-5.pdf
3) Wall Street & the Rise of Hitler by Antony C. Sutton 148 pages https://www.voltairenet.org/IMG/pdf/Sut ... Hitler.pdf
4) Wall Street and FDR by Antony C. Sutton 177 pages http://sandiego.indymedia.org/media/2007/02/125049.pdf
5) Dishonest Money by Joseph Plummer 175 pages http://joeplummer.com/dishonest-money.html
6) None Dare Call it Conspiracy by Gary Allen 197 pages http://www.outpost-of-freedom.com/libra ... y_1971.pdf
David Rockefeller: Memoirs (The story of traitors)
http://www.devvy.com/pdf/2006_November/ ... rnment.pdf
azracer
1000_Posts
 
Posts: 1368
Joined: Thu May 24, 2012 6:34 pm

Re: Power Wagon Parts

Postby RustyPW » Mon Jun 11, 2012 11:15 pm

azracer wrote:
ldgregory wrote:Power Wagon frame vs. Ram 2500 frame part number

PW frame is part number 55398868AC and the frame for the 2500 4x4 RAMs (gas and diesel) is 55398813AC.

Just throwing that out there.


Does anyone know what exactly is different?
I have suspicions that is is just mounting holes and hardware for the skid plates and such but I honestly don't know.

Ace found out that there is a difference between the PW '08's and '09's front frame area. Where the sway bar bolts to. The '09's is wider.
PWOC #53
2008 POWER WAGON RC
Mods to the PW; Nerffed Mopar RockRails, Wheel Well Liners, Bushwacker Pocket Fender Flairs, Garvmin dezl 560LMT GPS, Power Wagon Winch Kit, Line X Ultra Bed Liner, PIAA Headlight Bulbs, PIAA 580 Driving Lights (135 watt), PIAA 520 Fog Lights (135 watt), PIAA 520 ATP Off-Road Lights (135 watt), Locker Bypass, Modifed Rockcrusher Diff Covers, Mopar Utility Bed Rails and Tool Box, Warn Winch Wireless Remote Control, "el-cheapo" Inclinometer, Airaid CAI, Winch TPS Bypass, 35" Toyo's, Mopar Spare Tire Lock, 'T' Steering Linkage, Modifed PSC Steering Brace, P3 Brake Controller, Modifed Fusion "mall crawler" rear bumper , PIAA 1500 Back-Up Lights, 1Ton HEMI Tranny Cooler, Leer 100XR Bed Cap, Factory Tow Mirrors, CenterLine Rims 17x9-5.25 BS, Mag-Hytec Tranny Pan, AutoMeter Gauges, PSC Extreme Hydro Assist Steering, Carli Track Bar, Carli Ball-Joints, Dynatrac FreeSpin Hubs, Snorkel, RCV Axles, EBC Pads & Rotors, Aluminess Front Bumper, BIG Pul-Pal, 60" Extreme Hi-lift Jack, and more riggin' equipment, Carli Long Travel Air Bags, Bilstein 7100 Shocks - Carli Valving, MORE STUFF COMIN'.

Moab '10, '12, '14.
Rausch Creek Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17,
Russ NRA Benefactor Member
RustyPW
2000_Posts
 
Posts: 3510
Joined: Thu May 24, 2012 2:23 pm
Location: Brownsville Pa.

Re: Power Wagon Parts

Postby Ken G. » Wed Jun 27, 2012 10:34 am

These guys are based in Idaho. Maybe another option for bumpers, rails, etc. for folks out in the Rocky Mountain states....definitely miss being out there!

www.extremewinchbumpers.com/
"People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf." - George Orwell

2011 PW. AFE Full Metal Power Stage 2 CAI. Readylift T6 Billet leveling kit. Yakima Load Warrior bed rack on crossbars (reinforced). Hi-Lift w/ Baja-base, Powertank PT-10 w/ Monster Regulator, shovel, and axe mounted on bed rack. Radioshack CB. 5 x 35" Nitto Trail Grappler MTs on PW wheels. UWS truck bed box with tools and recovery gear. Bed-mounted Billet 4x4 Fuel and H2O Jerry cans w/carriers. Rausch Creek Limited Edition Modified Ranch Hand Grille Guard (currently undergoing radical surgery and modification). Carli front diff guard. Custom rock sliders and custom rear diff skid plate fabbed by Iron Pig Off Road.
User avatar
Ken G.
50_Posts
 
Posts: 238
Joined: Wed May 30, 2012 9:27 am
Location: Stafford, Virginia

Synthetic Rope

Postby Cactus Red » Wed Jun 27, 2012 11:17 am

Ken G. wrote:Saw this on Truck and Winch's website. Don't know if it's as good as Amsteel Blue or Viking, but looks like a pretty good deal.

http://truckandwinch.com/tuff-stuff-syn ... -92ft.html


The weight rating on this product is much, much lower that the competitors products. At a rating of 16,500 lbs, it's 5000 lbs below the 7/16" rope from WinchLine.com.

http://www.vikingoffroad.com/products/7 ... imble.html

16000 lbs capacity will work, but I personally like to have a bit more safety factor than that. I may get a chunk of the cheaper stuff for an extension tho.
I'm just along for the ride...
User avatar
Cactus Red
Moderator
 
Posts: 1836
Joined: Sun May 20, 2012 4:43 pm
Location: Chino Valley, AZ.

Re: Power Wagon Parts

Postby Ramicon » Sun Sep 02, 2012 10:15 am

ldgregory wrote:Power Wagon frame vs. Ram 2500 frame part number

PW frame is part number 55398868AC and the frame for the 2500 4x4 RAMs (gas and diesel) is 55398813AC.

Just throwing that out there.


Just so everyone knows this about the PW frames...it has been mention that this frame is different then the stock 2500 frame..well it is not..the reason it has it's own part number is it's the same frame but one extra set is done to it...that is, it has predrilled holes in it too bolt up extra cross members and skid plates too. This is the only difference. As far as the suspension, the lower and upper arms are a little longer to offset for the 2.5 inch lift
User avatar
Ramicon
 
Posts: 18
Joined: Wed Aug 29, 2012 4:21 pm

Re: Power Wagon Parts

Postby RedMan » Sat Dec 22, 2012 3:53 am

Power Wagon Registry #47
- SCT Tuner by [url="http://www.hemifevertuning.com/"]http://www.hemifevertuning.com/[/url]
- Thuren suspension upgrade (springs, shocks, and shackles)
- Thuren steering upgrade
- DT PROFAB Swaybar links (w/ +2" lift)
- Wattsenegger Front & Rear bumpers (1/4" walls)
- 35 12.50R 17 NITTO Mud Grapplers (second set)__- Snorkel
- Rock Rails_______________________- CB Radio
- RockCrusher Front Diff Cover_______- Tool box and all necessary tools
- diff locker manual switch's_______________ - Flow Master Series 50 Dual Exhaust
- Illuminated Ram Hood Emblem______- Rocker Panels Hurculined
- H2 Wheels w/moded hubcaps_______- Power Wagon Winch Strap
- Solar Battery Maintainer___________- Hide-Away Gun rack

"The" Wifes Car
"Faith" 2014 Charger RT Max

My Toy
"VISCO" 2013 196CC Tidewater
User avatar
RedMan
250_Posts
 
Posts: 349
Joined: Sun May 27, 2012 1:10 am
Location: Jacksonville NC

Re: Power Wagon Parts

Postby RedMan » Sat Jan 12, 2013 9:08 pm

SUSPENSION UPGRADES

http://www.thurenfabrication.com That's the guy to talk to about suspension BEFORE buying ANYTHING :-)



DT website
http://www.dtprofab.com/POWER-WAGON_c_34.html

8 Lug Truck Gear (Offering Carli and Pure Performance kits) - Excellent Customer Service.
http://www.8lugtruckgear.com/

Pure Performance Suspension Upgrades
http://www.pure-performance.biz/SearchR ... p?Cat=1858

BDS Long Arm Suspension
http://www.bds-suspension.com/

QUAD 4 x4 Your 4x4 Experts! - BALL JOINT QUADKITS™
http://quad4x4.com

Carli Extremem Heavy Duty Upper Balljoints Dodge AAM 9.25 1500 MegaCab and 2500/3500 Heavy Duty.
http://www.thecarlisuspension.com/

Carli Suspension Systems
http://www.thecarlisuspension.com

Towing gear

AmSteel Blue Winch rope
http://www.customsplice.com/

Stock Wire Rope
http://www.warn.com/truck/

Black Rat Towing Kit $79.95
http://www.4x4groupbuy.com/store/

Straps
http://www.uscargocontrol.com/

Recovery gear (everything you need)
http://www.smittybilt.com/trail_gear.htm

HD stuff for recovery.
http://www.awdirect.com/

ARB Snatch Block, 30,000 lb, (twist type) - ($60.00)
http://www.4wheelparts.com/

OK-SNARB - OKOR - Snatch Block 30000lb Tellico 4x4
http://www.tellico4x4.com/

Warn HEAVY DUTY 24K 24,000 lbs Winch Snatch Block W3615640 ($150.00)
http://stores.got-chrome.com/Items/

HD SNATCH BLOCKS FOR MUCH LESS $$$.
http://allenmachineco.com/pages/data/

Body Armor

BIT Sliders
http://www.extremewinchbumpers.com/

Tires/wheels

Tire Chains
http://www.clothiertransmissionandtractionproducts.com/

Great sites for information

RTI Index Explained
http://www.offroaders.com/info/tech-corner/rti.htm

Tires Reviews (numerous brands)
http://www.offroaders.com/tech/AT-MT-Tires/

You want to know were the nearest rock climbing event is? look at this link.
http://www.sportsintherough.com/

Fluid Capacities
http://www.dodge.com/bodybuilder/2008/docs/dr/fc.pdf

Interior and Exterior add-ons

Truck add ons is a good site, this link sends you to a nifty little light bracket.
http://www.truckaddons.com/Catalog/s...ight-mount.htm[/quote]

If you are looking for some cool interior accessories, this is where I got my wife’s dash cover
http://www.dashcoversplus.com/site/1427228/

Pop & Lock link to one site that sells them for around $90. You have to select your truck year and model to see the price.
http://www.buyautotruckaccessories.c...doapps.1/#apps

You may want to get the TrailSeal to seal the bed if you get a cover to seal out rain, dust, etc.
http://truckalterations.com/html/trailseal.html

And this is the tonneau cover I want. It's strong enough to stand on. They demonstrated putting an ATV on top of it, but I wouldn't. It supports 400lbs.
Extang TriFold "SolidFold"
http://truckalterations.com/html/extangsf.html

Here's one that supports 1600lbs. Wow! (Costs around $1400)
http://www.diamondbackcovers.com/products_tc.asp
http://www.truckaddons.com/Catalog/s...truckcover.htm

Or a four-way fold that the front folds up to access a tool box:
http://truckalterations.com/html/foldacoverls.html

And here's one that works with an over the rail tool box.
http://truckalterations.com/html/undercoverbb.html

Facts about the RER MyGig radios.
http://home.comcast.net/~mr.scsi3/RER/rer_facts.html

One piece HD bed cover.
http://undercoverinfo.com/classic.php

mostly CTD stuff, but they have a few things that might help us.
http://www.genosgarage.com/

freakin LOUD airhorns on their Power Wagon!
http://www.hornblasters.com/

Filter-Mag Oil filter magnet
http://www.shopfiltermag.com/index.php

Cool roof racks
http://www.offroadunlimited.com/

Defiant Truck Parts. I bought a pair of rear light brackets that can go either under the bumper or behind the bumper (requires cutting) for $29.00:
http://www.defianttruckproducts.com/

RAD-1 Digital Inclinometer
http://www.rad1.com/
http://www.4x4review.com/Reviews/Pro...5/Default.aspx
Last edited by RedMan on Tue Oct 13, 2015 3:58 am, edited 2 times in total.
Power Wagon Registry #47
- SCT Tuner by [url="http://www.hemifevertuning.com/"]http://www.hemifevertuning.com/[/url]
- Thuren suspension upgrade (springs, shocks, and shackles)
- Thuren steering upgrade
- DT PROFAB Swaybar links (w/ +2" lift)
- Wattsenegger Front & Rear bumpers (1/4" walls)
- 35 12.50R 17 NITTO Mud Grapplers (second set)__- Snorkel
- Rock Rails_______________________- CB Radio
- RockCrusher Front Diff Cover_______- Tool box and all necessary tools
- diff locker manual switch's_______________ - Flow Master Series 50 Dual Exhaust
- Illuminated Ram Hood Emblem______- Rocker Panels Hurculined
- H2 Wheels w/moded hubcaps_______- Power Wagon Winch Strap
- Solar Battery Maintainer___________- Hide-Away Gun rack

"The" Wifes Car
"Faith" 2014 Charger RT Max

My Toy
"VISCO" 2013 196CC Tidewater
User avatar
RedMan
250_Posts
 
Posts: 349
Joined: Sun May 27, 2012 1:10 am
Location: Jacksonville NC

Re: Power Wagon Parts

Postby djgaston » Sun Jan 13, 2013 1:54 am

Defiant is closed, unfortunately. Can I take his spot? Lol
Danny Gaston, Dodge Off Road  -  Email sales@dodgeoffroad.com
(Please email us for the fastest response - Private messages may not get noticed)

Suspension and Steering Products for Ram 4x4 trucks - 1st through 5th gen models. The only suspension company specializing in Power Wagon trucks, 2005 through 2016. We build Power Wagon parts because we are Power Wagon owners!

2005 Power Wagon #469 - 6" DOR long arm suspension, SAW 2.5" coilovers front and rear, 41" Irok tires on Trailready beadlocks, Road Armor bumpers, DOR steering linkage and brace - much more
2014 Ram 2500 CTD - 3" DOR adjustable radius arm suspension, Fox 2.0" remote resi shocks front and rear, 37" Toyo MT tires on Method Wheels - the tow rig
2001 Ram 2500 V10 - 8" DOR coilover long arm suspension front and rear, prepping for 2.5 ton Rockwells with ARB lockers with front and rear steering, 47" LTBs on Trailready Beadlocks - much more
User avatar
djgaston
50_Posts
 
Posts: 236
Joined: Wed Aug 22, 2012 12:12 pm
Location: Arkansas, home of the best wheeling in the country!

Re: Power Wagon Parts

Postby TwinStick » Fri Jun 28, 2013 7:56 pm

2008 Red QC PW G56. No lift yet, stock size tires. It pulls a 2016 Starcraft AR One Extreme, 3500 lbs.
Load Pro 35 helper springs. 2015 A.R.E. MX Series custom cap. PCP front diff cover protector. Mag-Hytec 6 qt rear diff cover. K&N replacement air filter only. Dual grounded throttle body. Winch TPC bypass. Fab Four rear bumper. DURA BAK lined rocker protection. And a bunch of new front end stuff.

G-56 Gear ratios: 1st) 6.29:1 2nd) 3.48:1 3rd) 2.10:1 4th) 1.38:1 5th) 1.0:1 6th) 0.79:1 Rev 6.29:1 --- = 78.01613:1 Crawl Ratio
-------------------------5.94:1--------3.28:1-------1.98:1-------1.31:1-------1.0:1-------0.74:1-----5.42:1 ---- = 73.675:1
545RFE----------------3.0:1---------1.67:1--------1.0:1--------0.75:1-------0.67:1------------------3.0:1 -------=37.21:1

2013+ 32.47 crawl ratio...............Can you see the trend ??????????????
TwinStick
2000_Posts
 
Posts: 3731
Joined: Mon May 28, 2012 5:58 pm

Re: Power Wagon Parts

Postby fbenross » Sat Jul 27, 2013 7:31 pm

Thanks Twinstick...This thread is a great Idea... :patriot:
Ben CW3 2/10th AIR CAV FT ORD CA. (retired)
2006 Power Wagon-6spd, rear air bags, Diff Guards:Carli F. RockCrusher R., matching rim for spare tire, removed back seat for storage----I own the following: 2005 Hallmark pop-top Camper---1970 Scout 800 4x4 w/232ci 6cyl 4spd---2006 Yamaha XT225 Dual Sport---Pictures @ https://www.flickr.com/photos/powerwagon/collections
User avatar
fbenross
500_Posts
 
Posts: 588
Joined: Thu May 24, 2012 6:35 pm
Location: Moss Beach CA

Re: Power Wagon Parts

Postby stamm20 » Fri Mar 14, 2014 6:57 pm

Heres a good all around site to get a variety of things. I got a good deal on my Fox 2.0 shocks from them.

http://www.polyperformance.com/shop/
07 Brilliant Black Power Wagon
Current Mods: 35x12.50x17 Kelly Fierce Attitude M/T, DiabloSport Predator tuner, 3in Super 40 with 3in dump, TPS bypass, Pioneer touch screen Nav System with ipod hookup, Carli front diff gaurd, Fox adjustable steering stabilizer, Mopar steering box upgrade weathertec floor mats, Fox 2.0 performance shocks, hardwired lockers, evo swaybar disconnect



Yea Though I wheel through the valley of the shadow of death,
I will fear no evil: For thou lockers are with me;
Thy lift and thy tires, they comfort me.
Thou preparest a spotter before me in the presence of mine obstacles
User avatar
stamm20
50_Posts
 
Posts: 189
Joined: Fri May 25, 2012 11:51 am
Location: Greenville, NC

Re: Power Wagon Parts

Postby fbenross » Sun Mar 16, 2014 10:54 am

I bought Spicer Universal Joints (PNR 5006813) for the F. Axel on my 06 from autoplicity.com $112.56 + $8.00 ship (no tax) = $120.56 - Best price I could find.
Ben CW3 2/10th AIR CAV FT ORD CA. (retired)
2006 Power Wagon-6spd, rear air bags, Diff Guards:Carli F. RockCrusher R., matching rim for spare tire, removed back seat for storage----I own the following: 2005 Hallmark pop-top Camper---1970 Scout 800 4x4 w/232ci 6cyl 4spd---2006 Yamaha XT225 Dual Sport---Pictures @ https://www.flickr.com/photos/powerwagon/collections
User avatar
fbenross
500_Posts
 
Posts: 588
Joined: Thu May 24, 2012 6:35 pm
Location: Moss Beach CA

2012-2014 PW specifications

Postby adeluca73 » Fri Aug 01, 2014 12:27 pm

PW Specifics: Click on your model yr. and then select the info you want. It's all there.

http://www.rambodybuilder.com/uopt_files/frame.htm
2014 Ram PW SLT: Two tone Flame Red & Black
Completed Mods: Ram door sill guards, Front air deflector, WeatherTech slimline window deflectors, DiamondBack HD cover coated w/ Line-X, Mufflex MagnaFlow muffler & Resonator delete, Opti-Coat Pro 2.0, DeeZee tailgate strut, DeeZee ¼" fitted bed mat, Factor-55: FlatLink winch hook/Shorty Strap 3.0/Hitchlink 2.5, Warn Wireless Winch Remote, Locker by-pass, AEM dry filter, Truxedo LED bed lights wired into RamBox Connector, WhiteKnuckle sliders w/ full-length diamond plate coated in Line-X, Purple Cranium rear diff guard, AEV front/rear diff cover, AEV RAI w/ pre-filter, AEV ProCal (Bootleg'd), DOR Steering Box Brace, Phillips Hi intensity LEDs in cargo lamps & back-ups, triple anti-hop shocks, Truxx PW specific front 1.5" level, AAM 4.88's, custom black-out work, Line-X front/rear bumpers & wheel flares, 37" Nitto Ridge Grapplers, Plasti-dip PW wheels Black w/ Gunmetal metalizer, FilterMag kit, AMP Research BedStep
Next Mods: Thuren: {Coils, Track Bar, Boggie Bumps, King 2.5's shocks} , on-board air, HID low CANBUS replacement, LED HI, BD LED fogs
User avatar
adeluca73
2000_Posts
 
Posts: 2020
Joined: Mon May 19, 2014 9:56 pm
Location: The Pentagon, VA

Re: Power Wagon Parts

Postby TwinStick » Mon Oct 06, 2014 7:27 am

Stock Power Wagon swaybar end links ???? I need some.


Or.....is there something else thats better available ?
2008 Red QC PW G56. No lift yet, stock size tires. It pulls a 2016 Starcraft AR One Extreme, 3500 lbs.
Load Pro 35 helper springs. 2015 A.R.E. MX Series custom cap. PCP front diff cover protector. Mag-Hytec 6 qt rear diff cover. K&N replacement air filter only. Dual grounded throttle body. Winch TPC bypass. Fab Four rear bumper. DURA BAK lined rocker protection. And a bunch of new front end stuff.

G-56 Gear ratios: 1st) 6.29:1 2nd) 3.48:1 3rd) 2.10:1 4th) 1.38:1 5th) 1.0:1 6th) 0.79:1 Rev 6.29:1 --- = 78.01613:1 Crawl Ratio
-------------------------5.94:1--------3.28:1-------1.98:1-------1.31:1-------1.0:1-------0.74:1-----5.42:1 ---- = 73.675:1
545RFE----------------3.0:1---------1.67:1--------1.0:1--------0.75:1-------0.67:1------------------3.0:1 -------=37.21:1

2013+ 32.47 crawl ratio...............Can you see the trend ??????????????
TwinStick
2000_Posts
 
Posts: 3731
Joined: Mon May 28, 2012 5:58 pm

Re: Power Wagon Parts

Postby BlkWgn » Mon Oct 06, 2014 8:28 am

TwinStick wrote:Stock Power Wagon swaybar end links ???? I need some.


Or.....is there something else thats better available ?


These are basic endlinks http://smile.amazon.com/gp/product/B007 ... UTF8&psc=1 better ones are here http://www.cjcoffroad.com/DT-Pro-Fab-Do ... 2043-1.htm
My new photography site - BlkWgn Photography http://blkwgn.smugmug.com

2006 Dodge Power Wagon production number 44 - Mercenary Offroad Prototype Bumper - Toyo 35 MT - Caril Springs - Carli Track Bar - Thuren Overland Shocks - Carli Front Diff Guard - RockCrusher Rear Diff Guard - Airflow Snorkel - Locker Bypass - Leer shell w/Roof Rack and 125w Solar Panel - and an empty wallet
1979 Yamaha DT175 Enduro (For Sale)

Kilo Juliet Six Delta Zulu Zulu

EMR (Emergency Medical Responder) Certified via San Bernardino County Fire
San Antonio Heights C.E.R.T Founding Member
San Bernardino National Forest OHV Volunteer[/color]

Build Thread http://americanadventurist.com/Forum/sh ... agon-Build

American Adventurist - http://www.americanadventurist.com
BlkWgn
250_Posts
 
Posts: 278
Joined: Thu May 24, 2012 10:22 am

Re: Power Wagon Parts

Postby TwinStick » Mon Feb 08, 2016 11:30 am

Transfer Case Position Sensor----------------------Part # 0508 3138 AA

Oil Pressure Sensor----------------------------------Part # 0514 9097 AA

Part # 5, Called by different names: tone ring-Coil assembly-Powertrain Control module-Locker mechanism-etc------------Part # 7403 2920 AA
2008 Red QC PW G56. No lift yet, stock size tires. It pulls a 2016 Starcraft AR One Extreme, 3500 lbs.
Load Pro 35 helper springs. 2015 A.R.E. MX Series custom cap. PCP front diff cover protector. Mag-Hytec 6 qt rear diff cover. K&N replacement air filter only. Dual grounded throttle body. Winch TPC bypass. Fab Four rear bumper. DURA BAK lined rocker protection. And a bunch of new front end stuff.

G-56 Gear ratios: 1st) 6.29:1 2nd) 3.48:1 3rd) 2.10:1 4th) 1.38:1 5th) 1.0:1 6th) 0.79:1 Rev 6.29:1 --- = 78.01613:1 Crawl Ratio
-------------------------5.94:1--------3.28:1-------1.98:1-------1.31:1-------1.0:1-------0.74:1-----5.42:1 ---- = 73.675:1
545RFE----------------3.0:1---------1.67:1--------1.0:1--------0.75:1-------0.67:1------------------3.0:1 -------=37.21:1

2013+ 32.47 crawl ratio...............Can you see the trend ??????????????
TwinStick
2000_Posts
 
Posts: 3731
Joined: Mon May 28, 2012 5:58 pm

Re: Power Wagon Parts

Postby TwinStick » Thu Nov 17, 2016 6:06 am

G-56 Shifter Boot

Moose ATV, Fast Boot, part # M92-06801 --------$17.99......http://www.parkeryamaha.com/moosefastbootkit.aspx
Other part #'s for the same thing: # 0213-0427 , # 558668

Geno's Garage part # DRM614002 -------$25.00 .............https://www.genosgarage.com/product/drm ... rain-plugs

Dodge Stealership (for the rubber boot only) part # 5191985 AA -------$90.00-$120.00 !!! :jawdrop:
Some dealers will tell you it ONLY comes in a kit, & is $600.00+ !!! :jawdrop: Bullshit, it is avail individually.
I think this is the same thing, just called something different, AKA---the name game:........http://www.wholesalemopar.com/parts_catalog.html ...About $20-$29.00

NOTE: If purchasing one from the dealer, DO NOT accept the orange or red ones. My research showed that these are the oldest ones & what was installed from the factory, & are thinner & much more prone to cracking/ripping/tearing. You want the black one that has been redesigned & is much thicker. Just an FYI.


Hope this helps others when the time comes. :rockon:
2008 Red QC PW G56. No lift yet, stock size tires. It pulls a 2016 Starcraft AR One Extreme, 3500 lbs.
Load Pro 35 helper springs. 2015 A.R.E. MX Series custom cap. PCP front diff cover protector. Mag-Hytec 6 qt rear diff cover. K&N replacement air filter only. Dual grounded throttle body. Winch TPC bypass. Fab Four rear bumper. DURA BAK lined rocker protection. And a bunch of new front end stuff.

G-56 Gear ratios: 1st) 6.29:1 2nd) 3.48:1 3rd) 2.10:1 4th) 1.38:1 5th) 1.0:1 6th) 0.79:1 Rev 6.29:1 --- = 78.01613:1 Crawl Ratio
-------------------------5.94:1--------3.28:1-------1.98:1-------1.31:1-------1.0:1-------0.74:1-----5.42:1 ---- = 73.675:1
545RFE----------------3.0:1---------1.67:1--------1.0:1--------0.75:1-------0.67:1------------------3.0:1 -------=37.21:1

2013+ 32.47 crawl ratio...............Can you see the trend ??????????????
TwinStick
2000_Posts
 
Posts: 3731
Joined: Mon May 28, 2012 5:58 pm

Re: Power Wagon Parts

Postby TwinStick » Fri Jan 06, 2017 10:54 pm

More winch solenoids. Warn Part # 72631

https://www.google.com/?gws_rd=ssl#q=Wa ... 1&tbm=shop

Interesting read on Power Wagon winch's.

https://www.warn.com/blog/2011/10/05/th ... inch.shtml
2008 Red QC PW G56. No lift yet, stock size tires. It pulls a 2016 Starcraft AR One Extreme, 3500 lbs.
Load Pro 35 helper springs. 2015 A.R.E. MX Series custom cap. PCP front diff cover protector. Mag-Hytec 6 qt rear diff cover. K&N replacement air filter only. Dual grounded throttle body. Winch TPC bypass. Fab Four rear bumper. DURA BAK lined rocker protection. And a bunch of new front end stuff.

G-56 Gear ratios: 1st) 6.29:1 2nd) 3.48:1 3rd) 2.10:1 4th) 1.38:1 5th) 1.0:1 6th) 0.79:1 Rev 6.29:1 --- = 78.01613:1 Crawl Ratio
-------------------------5.94:1--------3.28:1-------1.98:1-------1.31:1-------1.0:1-------0.74:1-----5.42:1 ---- = 73.675:1
545RFE----------------3.0:1---------1.67:1--------1.0:1--------0.75:1-------0.67:1------------------3.0:1 -------=37.21:1

2013+ 32.47 crawl ratio...............Can you see the trend ??????????????
TwinStick
2000_Posts
 
Posts: 3731
Joined: Mon May 28, 2012 5:58 pm

Next

Return to Member Builds

Who is online

Users browsing this forum: No registered users and 1 guest