"OX" build

Start your thread and show everyone your build out.
User avatar
RedMan
250_Posts
250_Posts
Posts: 349
Joined: Sun May 27, 2012 3:10 am
Location: Jacksonville NC

Re: "OX" build

Post by RedMan » Thu Feb 28, 2013 12:30 pm

SilverWagon05 wrote:Are they steel or billet? I'm still trying to decide whether to go with the DT units or Pure Performance. Thanks.

The extensions are made of alluminum and appears to be very strong. It is a big improvment over the stock links.

Bad thing is that I have to drill out the whole for the bottom portion of the link where it connects to the axle.

I looked at the Pure Performance, but it seems like I remeber one of the guys on here had to return his because they would not work for some reason. Do not remember why or what thread it was under.

Good luck and IMO I think anyone going with these links will be very happy with their upgrade.
Power Wagon Registry #47
- SCT Tuner by http://www.hemifevertuning.com/
- Thuren suspension upgrade (springs, shocks, and shackles)
- Thuren steering upgrade
- DT PROFAB Swaybar links (w/ +2" lift)
- Wattsenegger Front & Rear bumpers (1/4" walls)
- 35 12.50R 17 NITTO Mud Grapplers (second set)__- Snorkel
- Rock Rails_______________________- CB Radio
- RockCrusher Front Diff Cover_______- Tool box and all necessary tools
- diff locker manual switch's_______________ - Flow Master Series 50 Dual Exhaust
- Illuminated Ram Hood Emblem______- Rocker Panels Hurculined
- H2 Wheels w/moded hubcaps_______- Power Wagon Winch Strap
- Solar Battery Maintainer___________- Hide-Away Gun rack

"The" Wifes Car
"Faith" 2014 Charger RT Max

My Toy
"VISCO" 2013 196CC Tidewater

User avatar
RedMan
250_Posts
250_Posts
Posts: 349
Joined: Sun May 27, 2012 3:10 am
Location: Jacksonville NC

Re: "OX" build

Post by RedMan » Thu Feb 28, 2013 10:12 pm

Well they're installed and it was easier than anticipated. I had to drill out the mount on the axle to 9/16" (Bottom link).

Can someone give me an idea where the stock end links locate the sway bar? I need to know if I need/should adjust the new links at all?

Image

Image

Image

Image

Image

Image

Image

Image

Image
Power Wagon Registry #47
- SCT Tuner by http://www.hemifevertuning.com/
- Thuren suspension upgrade (springs, shocks, and shackles)
- Thuren steering upgrade
- DT PROFAB Swaybar links (w/ +2" lift)
- Wattsenegger Front & Rear bumpers (1/4" walls)
- 35 12.50R 17 NITTO Mud Grapplers (second set)__- Snorkel
- Rock Rails_______________________- CB Radio
- RockCrusher Front Diff Cover_______- Tool box and all necessary tools
- diff locker manual switch's_______________ - Flow Master Series 50 Dual Exhaust
- Illuminated Ram Hood Emblem______- Rocker Panels Hurculined
- H2 Wheels w/moded hubcaps_______- Power Wagon Winch Strap
- Solar Battery Maintainer___________- Hide-Away Gun rack

"The" Wifes Car
"Faith" 2014 Charger RT Max

My Toy
"VISCO" 2013 196CC Tidewater

User avatar
RedMan
250_Posts
250_Posts
Posts: 349
Joined: Sun May 27, 2012 3:10 am
Location: Jacksonville NC

Re: "OX" Make Over

Post by RedMan » Sat Mar 16, 2013 7:47 am

OK, here we go, part three of "OX" makeover :excited: :rockon: :popcorn:

First was the Thuren upgrade (Complete)
second the end links from DT Fro Fab (Complete)
Third Rear bumper (In progress)


Just the link to the thread I ended up with for the bumper (What did you do to your Power Wagon today):
http://forum.powerwagonregistry.org/vie ... ?f=2&t=855
Power Wagon Registry #47
- SCT Tuner by http://www.hemifevertuning.com/
- Thuren suspension upgrade (springs, shocks, and shackles)
- Thuren steering upgrade
- DT PROFAB Swaybar links (w/ +2" lift)
- Wattsenegger Front & Rear bumpers (1/4" walls)
- 35 12.50R 17 NITTO Mud Grapplers (second set)__- Snorkel
- Rock Rails_______________________- CB Radio
- RockCrusher Front Diff Cover_______- Tool box and all necessary tools
- diff locker manual switch's_______________ - Flow Master Series 50 Dual Exhaust
- Illuminated Ram Hood Emblem______- Rocker Panels Hurculined
- H2 Wheels w/moded hubcaps_______- Power Wagon Winch Strap
- Solar Battery Maintainer___________- Hide-Away Gun rack

"The" Wifes Car
"Faith" 2014 Charger RT Max

My Toy
"VISCO" 2013 196CC Tidewater

User avatar
RedMan
250_Posts
250_Posts
Posts: 349
Joined: Sun May 27, 2012 3:10 am
Location: Jacksonville NC

Re: "OX" build

Post by RedMan » Sat Mar 16, 2013 11:43 pm

Here are todays pics:

Image
Image
Image
Image
Image
Image
Image

This is what it looks like just before I left for the day. IT is upside down on the table, FYI
Image

OK, starting to wake on the truck now:
Image
Image
Image
Image
Power Wagon Registry #47
- SCT Tuner by http://www.hemifevertuning.com/
- Thuren suspension upgrade (springs, shocks, and shackles)
- Thuren steering upgrade
- DT PROFAB Swaybar links (w/ +2" lift)
- Wattsenegger Front & Rear bumpers (1/4" walls)
- 35 12.50R 17 NITTO Mud Grapplers (second set)__- Snorkel
- Rock Rails_______________________- CB Radio
- RockCrusher Front Diff Cover_______- Tool box and all necessary tools
- diff locker manual switch's_______________ - Flow Master Series 50 Dual Exhaust
- Illuminated Ram Hood Emblem______- Rocker Panels Hurculined
- H2 Wheels w/moded hubcaps_______- Power Wagon Winch Strap
- Solar Battery Maintainer___________- Hide-Away Gun rack

"The" Wifes Car
"Faith" 2014 Charger RT Max

My Toy
"VISCO" 2013 196CC Tidewater

User avatar
VA_Wagon Man
500_Posts
500_Posts
Posts: 737
Joined: Mon May 21, 2012 10:54 am
Location: Virginia

Re: "OX" build

Post by VA_Wagon Man » Sun Mar 17, 2013 5:55 am

Finally! Rock on Danny, looking great!:grin:

Sent from the middle of nowhere.
Long Gone:
'05 Silver Power Wagon: # 869: Custom Rear Hitch & Bed Clearance Mod, Custom Front and Rear Tubular Bumpers, Airflow 3rd Gen Snorkel, Diablo Sport Predator, 35x12.50 Nitto Mud Grappler Extreme Terrain, Flow Master 40, Mopar Rock Rails, Warn 15,000lb Winch,with Thermal Bypass, 4.56 Locking front and rear Diffs, Sway-bar disconnect, Uprgraded " T " steering linkage, Fully Skid plated with fore and aft bars, Carli Front Diff Protector, RockCrusher Rear Diff Pro, Bilstein 5100's with rear Custom Valving, Pit Slave Winch Strap, CajunPW PNP Locker By-Pass,

Follow Me, I'll Pull You Out...AFTER you pull me out......
Rausch Creek 2010 Fall Run
Rausch Creek 2011 Spring Run
Rausch Creek 2011 Fall Run
Rausch Creek 2012 Spring Run
Future Rausch Creek 2013 Spring Run June 22nd!

"There is no hunting, like the hunting of man, and those who have hunted armed men long enough, and liked it, never cared for anything else thereafter." --Earnest Hemmingway--

User avatar
RedMan
250_Posts
250_Posts
Posts: 349
Joined: Sun May 27, 2012 3:10 am
Location: Jacksonville NC

Re: "OX" build

Post by RedMan » Sun Mar 17, 2013 5:39 pm

day two complete. going back next week to finish her up :rockon: :excited:


Image

Image
Image
Power Wagon Registry #47
- SCT Tuner by http://www.hemifevertuning.com/
- Thuren suspension upgrade (springs, shocks, and shackles)
- Thuren steering upgrade
- DT PROFAB Swaybar links (w/ +2" lift)
- Wattsenegger Front & Rear bumpers (1/4" walls)
- 35 12.50R 17 NITTO Mud Grapplers (second set)__- Snorkel
- Rock Rails_______________________- CB Radio
- RockCrusher Front Diff Cover_______- Tool box and all necessary tools
- diff locker manual switch's_______________ - Flow Master Series 50 Dual Exhaust
- Illuminated Ram Hood Emblem______- Rocker Panels Hurculined
- H2 Wheels w/moded hubcaps_______- Power Wagon Winch Strap
- Solar Battery Maintainer___________- Hide-Away Gun rack

"The" Wifes Car
"Faith" 2014 Charger RT Max

My Toy
"VISCO" 2013 196CC Tidewater

User avatar
VA_Wagon Man
500_Posts
500_Posts
Posts: 737
Joined: Mon May 21, 2012 10:54 am
Location: Virginia

Re: "OX" build

Post by VA_Wagon Man » Sun Mar 17, 2013 8:20 pm

That it pure awesomeness. I can't wait to see it finished. i know you mentioned getting another Rockcrusher cover, but i thought you already had one on the rear.....?

Sent from the middle of nowhere.
Long Gone:
'05 Silver Power Wagon: # 869: Custom Rear Hitch & Bed Clearance Mod, Custom Front and Rear Tubular Bumpers, Airflow 3rd Gen Snorkel, Diablo Sport Predator, 35x12.50 Nitto Mud Grappler Extreme Terrain, Flow Master 40, Mopar Rock Rails, Warn 15,000lb Winch,with Thermal Bypass, 4.56 Locking front and rear Diffs, Sway-bar disconnect, Uprgraded " T " steering linkage, Fully Skid plated with fore and aft bars, Carli Front Diff Protector, RockCrusher Rear Diff Pro, Bilstein 5100's with rear Custom Valving, Pit Slave Winch Strap, CajunPW PNP Locker By-Pass,

Follow Me, I'll Pull You Out...AFTER you pull me out......
Rausch Creek 2010 Fall Run
Rausch Creek 2011 Spring Run
Rausch Creek 2011 Fall Run
Rausch Creek 2012 Spring Run
Future Rausch Creek 2013 Spring Run June 22nd!

"There is no hunting, like the hunting of man, and those who have hunted armed men long enough, and liked it, never cared for anything else thereafter." --Earnest Hemmingway--

User avatar
FirerescuePW
1000_Posts
1000_Posts
Posts: 1661
Joined: Sun May 20, 2012 12:51 pm
Location: North Wales, PA

Re: "OX" build

Post by FirerescuePW » Sun Mar 17, 2013 8:51 pm

That design looks better than most aftermarket pieces. Nice work, Danny!


Mike
'05 Mineral Gray Power Wagon QC #1005

WINCH MOB PROUD!

SuperChips FlashPaq; DT ProFab Steering Brace; 08.5 Steering linkage (twice); Toyo Open Country M/T 35/12.50x17; Carli front diff guard; Rockcrusher rear diff cover; White Knuckle Offroad Rock Rails; Carli 3"coils, track bar, and High Clearance Control Arms; Carli King 2.5" Remote Resi Shocks; Reflex spray-in liner; Extang Trifecta tonneau cover; Pop Lock electric tailgate lock (OOS); Tekonsha Prodigy brake control; LEDS & Strobes & Siren; Winch TPS Bypass; Warn Wireless Remote; Dog hair, and a BIG Wish List!

User avatar
RedMan
250_Posts
250_Posts
Posts: 349
Joined: Sun May 27, 2012 3:10 am
Location: Jacksonville NC

Re:

Post by RedMan » Sun Mar 17, 2013 9:10 pm

VA_Wagon Man wrote:That it pure awesomeness. I can't wait to see it finished. i know you mentioned getting another Rockcrusher cover, but i thought you already had one on the rear.....?

Sent from the middle of nowhere.
Thanks, It is eating me alive that I have to wait till next weekend to start back up on her :excited:

OH Yea, look past the welds, I kinda got in a rush towards the end of the day, and the wind started blowing and yes with moister, which is always bad for welding. I will grind all that off next weekend and by the time I am done you will not even know it was welded

I am trying to find a rock crusher for the rear end if anyone knows where I can find one :poke: ?
Power Wagon Registry #47
- SCT Tuner by http://www.hemifevertuning.com/
- Thuren suspension upgrade (springs, shocks, and shackles)
- Thuren steering upgrade
- DT PROFAB Swaybar links (w/ +2" lift)
- Wattsenegger Front & Rear bumpers (1/4" walls)
- 35 12.50R 17 NITTO Mud Grapplers (second set)__- Snorkel
- Rock Rails_______________________- CB Radio
- RockCrusher Front Diff Cover_______- Tool box and all necessary tools
- diff locker manual switch's_______________ - Flow Master Series 50 Dual Exhaust
- Illuminated Ram Hood Emblem______- Rocker Panels Hurculined
- H2 Wheels w/moded hubcaps_______- Power Wagon Winch Strap
- Solar Battery Maintainer___________- Hide-Away Gun rack

"The" Wifes Car
"Faith" 2014 Charger RT Max

My Toy
"VISCO" 2013 196CC Tidewater

User avatar
RedMan
250_Posts
250_Posts
Posts: 349
Joined: Sun May 27, 2012 3:10 am
Location: Jacksonville NC

Re:

Post by RedMan » Sun Mar 17, 2013 9:14 pm

FirerescuePW wrote:That design looks better than most aftermarket pieces. Nice work, Danny!


Mike
Thanks, it is about as low profile as I can make it and still be functional.

Looking at my welds, it is apparent that I have not welded anything in over 17 years :rofl: they are not pleasant to look at, at all.
Power Wagon Registry #47
- SCT Tuner by http://www.hemifevertuning.com/
- Thuren suspension upgrade (springs, shocks, and shackles)
- Thuren steering upgrade
- DT PROFAB Swaybar links (w/ +2" lift)
- Wattsenegger Front & Rear bumpers (1/4" walls)
- 35 12.50R 17 NITTO Mud Grapplers (second set)__- Snorkel
- Rock Rails_______________________- CB Radio
- RockCrusher Front Diff Cover_______- Tool box and all necessary tools
- diff locker manual switch's_______________ - Flow Master Series 50 Dual Exhaust
- Illuminated Ram Hood Emblem______- Rocker Panels Hurculined
- H2 Wheels w/moded hubcaps_______- Power Wagon Winch Strap
- Solar Battery Maintainer___________- Hide-Away Gun rack

"The" Wifes Car
"Faith" 2014 Charger RT Max

My Toy
"VISCO" 2013 196CC Tidewater

User avatar
VA_Wagon Man
500_Posts
500_Posts
Posts: 737
Joined: Mon May 21, 2012 10:54 am
Location: Virginia

Re: "OX" build

Post by VA_Wagon Man » Sun Mar 17, 2013 10:27 pm

The welds make it personal and add character.;)

Sent from the middle of nowhere.
Long Gone:
'05 Silver Power Wagon: # 869: Custom Rear Hitch & Bed Clearance Mod, Custom Front and Rear Tubular Bumpers, Airflow 3rd Gen Snorkel, Diablo Sport Predator, 35x12.50 Nitto Mud Grappler Extreme Terrain, Flow Master 40, Mopar Rock Rails, Warn 15,000lb Winch,with Thermal Bypass, 4.56 Locking front and rear Diffs, Sway-bar disconnect, Uprgraded " T " steering linkage, Fully Skid plated with fore and aft bars, Carli Front Diff Protector, RockCrusher Rear Diff Pro, Bilstein 5100's with rear Custom Valving, Pit Slave Winch Strap, CajunPW PNP Locker By-Pass,

Follow Me, I'll Pull You Out...AFTER you pull me out......
Rausch Creek 2010 Fall Run
Rausch Creek 2011 Spring Run
Rausch Creek 2011 Fall Run
Rausch Creek 2012 Spring Run
Future Rausch Creek 2013 Spring Run June 22nd!

"There is no hunting, like the hunting of man, and those who have hunted armed men long enough, and liked it, never cared for anything else thereafter." --Earnest Hemmingway--

MSparks909
250_Posts
250_Posts
Posts: 429
Joined: Mon May 21, 2012 2:43 pm
Location: New Bern/Wilmington, NC

Re: "OX" build

Post by MSparks909 » Mon Mar 18, 2013 4:48 am

Bumper looks great! You have inspired me to chop away at my rocker panels and come up with a new rear bumper that will give me more clearance :rockon:
2006 QC PW G56

Suspension: 3" Thuren Diesel coils, Carli Progressive leaf springs, Thuren DYSKO bumpstops, Thuren control arms, Thuren tracbar, Thuren draglink, King 2.5" remote reservoir front shocks/2.5" King DBL bypass rear shocks, limit straps, factory swaybar end links extended 2",

Engine/Drivetrain: Airaid full intake, Airflow snorkel, Magnaflow y-pipe, 3" Flowmaster Super 44, Jet 180 t-stat, locker bypass. Carli balljoints. greasable front u-joints, Gorilla Juice in the G56, Royal Purple 75W-140 in the diffs, Shell Rotella 5W-40 in the engine w/ oversize K&N filter.

Body/Appearance: Go Recon super white cab lights, Retro Solutions 55W 6000K HID kit for headlights/fogs and projector retro'd headlight, Carli front diff guard, Rockcrusher rear diff guard, lots of pinstriping & some dents

Interior: 12" JL Audio sub in custom box w/ adjustable bass knob and 500W JL Audio amplifier, headrest gun sling, CB radio

User avatar
RedMan
250_Posts
250_Posts
Posts: 349
Joined: Sun May 27, 2012 3:10 am
Location: Jacksonville NC

Re: "OX" build

Post by RedMan » Mon Mar 18, 2013 5:45 am

MSparks909 wrote:Bumper looks great! You have inspired me to chop away at my rocker panels and come up with a new rear bumper that will give me more clearance :rockon:
:secret: When you do it, use a cut off wheel vise a sawzaw :wtf: ! Also cut it when it is light outside OR you have good lighting :idea: I say this for a reason , mine did not come out straight at all :shock:

Good luck and when you do it let me know if you need help?
Power Wagon Registry #47
- SCT Tuner by http://www.hemifevertuning.com/
- Thuren suspension upgrade (springs, shocks, and shackles)
- Thuren steering upgrade
- DT PROFAB Swaybar links (w/ +2" lift)
- Wattsenegger Front & Rear bumpers (1/4" walls)
- 35 12.50R 17 NITTO Mud Grapplers (second set)__- Snorkel
- Rock Rails_______________________- CB Radio
- RockCrusher Front Diff Cover_______- Tool box and all necessary tools
- diff locker manual switch's_______________ - Flow Master Series 50 Dual Exhaust
- Illuminated Ram Hood Emblem______- Rocker Panels Hurculined
- H2 Wheels w/moded hubcaps_______- Power Wagon Winch Strap
- Solar Battery Maintainer___________- Hide-Away Gun rack

"The" Wifes Car
"Faith" 2014 Charger RT Max

My Toy
"VISCO" 2013 196CC Tidewater

User avatar
verdesardog
500_Posts
500_Posts
Posts: 989
Joined: Thu May 31, 2012 11:24 am
Model Year: 2006

Re: "OX" build

Post by verdesardog » Mon Mar 18, 2013 10:15 am

That looks nice except for the trailer hitch. If I was going to do something like that I would have made the hitch as flush with the bumper as possible even if I had to put the pin in behind the bumper. Just a thought....
2006 Big Horn 2500 Ram CTD. IMAGINE ALL THE PEOPLE LIVING LIFE IN PEACE
Image

User avatar
Cactus Red
Moderator
Moderator
Posts: 1862
Joined: Sun May 20, 2012 6:43 pm
Location: Chino Valley, AZ.

Re: "OX" build

Post by Cactus Red » Mon Mar 18, 2013 12:20 pm

Nice!

The welds look fine - nothing a flapper wheel won't dress up. If there are still pin holes, a quick coat of light body cream will cover that up easily.

I've done a couple bumpers like that. To make the pin accessible on the hitch, that's the best way to go. I did one recessed, and it was a bitch to get it in and out from the bottom, plus a lot more work to make it where it could be even accessed from the bottom.
I'm just along for the ride...

User avatar
RedMan
250_Posts
250_Posts
Posts: 349
Joined: Sun May 27, 2012 3:10 am
Location: Jacksonville NC

Re: "OX" build

Post by RedMan » Mon Mar 18, 2013 9:28 pm

I am with you, I think the welds are good, just not appealing to the eye right now. Once she is done and a thick coat of Hurculiner is added you will not be able to tell :rockon:

Thanks to all for the comments.
Cactus Red wrote:Nice!

The welds look fine - nothing a flapper wheel won't dress up. If there are still pin holes, a quick coat of light body cream will cover that up easily.

I've done a couple bumpers like that. To make the pin accessible on the hitch, that's the best way to go. I did one recessed, and it was a bitch to get it in and out from the bottom, plus a lot more work to make it where it could be even accessed from the bottom.
Power Wagon Registry #47
- SCT Tuner by http://www.hemifevertuning.com/
- Thuren suspension upgrade (springs, shocks, and shackles)
- Thuren steering upgrade
- DT PROFAB Swaybar links (w/ +2" lift)
- Wattsenegger Front & Rear bumpers (1/4" walls)
- 35 12.50R 17 NITTO Mud Grapplers (second set)__- Snorkel
- Rock Rails_______________________- CB Radio
- RockCrusher Front Diff Cover_______- Tool box and all necessary tools
- diff locker manual switch's_______________ - Flow Master Series 50 Dual Exhaust
- Illuminated Ram Hood Emblem______- Rocker Panels Hurculined
- H2 Wheels w/moded hubcaps_______- Power Wagon Winch Strap
- Solar Battery Maintainer___________- Hide-Away Gun rack

"The" Wifes Car
"Faith" 2014 Charger RT Max

My Toy
"VISCO" 2013 196CC Tidewater

RustyPW
2000_Posts
2000_Posts
Posts: 5429
Joined: Thu May 24, 2012 4:23 pm
Model Year: 2008
Location: Brownsville Pa.

Re: "OX" build

Post by RustyPW » Wed Mar 20, 2013 12:00 am

Looking good danny. For the rear cover. I would look into this. :wink:


http://forum.powerwagonregistry.org/vie ... f=20&t=907
PWOC #53
2008 POWER WAGON RC

My build thread. http://forum.powerwagonregistry.org/vie ... =13&t=2826 :cash: :cash:

Moab '09, '10, '12, '14.
Rausch Creek - Summer '10, Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18, Summer '20, Summer '22,
AOAA Summer '19.

Russ
NRA - Benefactor, Golden Eagle. :lockedandloaded:

TwinStick

Re: "OX" build

Post by TwinStick » Wed Mar 20, 2013 10:20 am

3/8" thick & 2 magnetic drain plugs & holds an extra qt.

06powerwagon06
50_Posts
50_Posts
Posts: 87
Joined: Sat May 19, 2012 8:31 pm
Location: Ontario, Canada

Re: "OX" build

Post by 06powerwagon06 » Wed Mar 20, 2013 8:05 pm

RedMan wrote:look at what I found at my front door when I got back from dinner with my wife :excited: :excited: :excited:


Image

Just ordered a set of these the other day. Danny....what setting did you eventually put them on? We have the identical set up right now other than the shocks. Thanks
'06 Black Power Wagon, Quad Cab, Heated Leather, 4" Boss Bars nerf bars, Locker Bypass, TPS Bypass, Smoked clearance lights, Tool Box, Recovery gear, Carli Front Diff Guard, Rockcrusher Rear Diff Cover, 60" Hi Lift Jack-Mounted in Tool Box, Bed Liner'd Front & Rear Bumpers, Rockers and Grill, "T" Steering Upgrade, DT ProFab Steering Brace, Kill Switch, 2-6" Aux. Lights Behind Grill, Back Up Lights, Wheel Well Liners, 315/70/17 Goodyear Wrangler Duratracs, Airflow Snorkel, Rock Rails fabbed by me, Borgeson Steering Shaft, etc..[/size]

Rausch Creek Spring '12

User avatar
RedMan
250_Posts
250_Posts
Posts: 349
Joined: Sun May 27, 2012 3:10 am
Location: Jacksonville NC

Re: "OX" build

Post by RedMan » Thu Mar 21, 2013 5:40 am

Those things are nice and well built. Great choice, you will not regret it.
06powerwagon06 wrote:
RedMan wrote:look at what I found at my front door when I got back from dinner with my wife :excited: :excited: :excited:


Image

Just ordered a set of these the other day. Danny....what setting did you eventually put them on? We have the identical set up right now other than the shocks. Thanks
Power Wagon Registry #47
- SCT Tuner by http://www.hemifevertuning.com/
- Thuren suspension upgrade (springs, shocks, and shackles)
- Thuren steering upgrade
- DT PROFAB Swaybar links (w/ +2" lift)
- Wattsenegger Front & Rear bumpers (1/4" walls)
- 35 12.50R 17 NITTO Mud Grapplers (second set)__- Snorkel
- Rock Rails_______________________- CB Radio
- RockCrusher Front Diff Cover_______- Tool box and all necessary tools
- diff locker manual switch's_______________ - Flow Master Series 50 Dual Exhaust
- Illuminated Ram Hood Emblem______- Rocker Panels Hurculined
- H2 Wheels w/moded hubcaps_______- Power Wagon Winch Strap
- Solar Battery Maintainer___________- Hide-Away Gun rack

"The" Wifes Car
"Faith" 2014 Charger RT Max

My Toy
"VISCO" 2013 196CC Tidewater

06powerwagon06
50_Posts
50_Posts
Posts: 87
Joined: Sat May 19, 2012 8:31 pm
Location: Ontario, Canada

Re: "OX" build

Post by 06powerwagon06 » Thu Mar 21, 2013 8:32 am

Did you leave them screwed in all the way or did you adjust them out a bit?
'06 Black Power Wagon, Quad Cab, Heated Leather, 4" Boss Bars nerf bars, Locker Bypass, TPS Bypass, Smoked clearance lights, Tool Box, Recovery gear, Carli Front Diff Guard, Rockcrusher Rear Diff Cover, 60" Hi Lift Jack-Mounted in Tool Box, Bed Liner'd Front & Rear Bumpers, Rockers and Grill, "T" Steering Upgrade, DT ProFab Steering Brace, Kill Switch, 2-6" Aux. Lights Behind Grill, Back Up Lights, Wheel Well Liners, 315/70/17 Goodyear Wrangler Duratracs, Airflow Snorkel, Rock Rails fabbed by me, Borgeson Steering Shaft, etc..[/size]

Rausch Creek Spring '12

User avatar
RedMan
250_Posts
250_Posts
Posts: 349
Joined: Sun May 27, 2012 3:10 am
Location: Jacksonville NC

Re: "OX" build

Post by RedMan » Fri Mar 22, 2013 7:47 pm

I kept them screwed in all the way. Trying to figure out what the length of the O.E. link were. You do not by chance have the O.E. links handy where you can measure them do you? I had to cut mine off, so do not know.

If you have the O.E. and can send me the length, I plan on adjusting mine two inches longer to make up for the lift.

Thanks
06powerwagon06 wrote:Did you leave them screwed in all the way or did you adjust them out a bit?
Power Wagon Registry #47
- SCT Tuner by http://www.hemifevertuning.com/
- Thuren suspension upgrade (springs, shocks, and shackles)
- Thuren steering upgrade
- DT PROFAB Swaybar links (w/ +2" lift)
- Wattsenegger Front & Rear bumpers (1/4" walls)
- 35 12.50R 17 NITTO Mud Grapplers (second set)__- Snorkel
- Rock Rails_______________________- CB Radio
- RockCrusher Front Diff Cover_______- Tool box and all necessary tools
- diff locker manual switch's_______________ - Flow Master Series 50 Dual Exhaust
- Illuminated Ram Hood Emblem______- Rocker Panels Hurculined
- H2 Wheels w/moded hubcaps_______- Power Wagon Winch Strap
- Solar Battery Maintainer___________- Hide-Away Gun rack

"The" Wifes Car
"Faith" 2014 Charger RT Max

My Toy
"VISCO" 2013 196CC Tidewater

06powerwagon06
50_Posts
50_Posts
Posts: 87
Joined: Sat May 19, 2012 8:31 pm
Location: Ontario, Canada

Re: "OX" build

Post by 06powerwagon06 » Fri Mar 22, 2013 9:53 pm

RedMan wrote:I kept them screwed in all the way. Trying to figure out what the length of the O.E. link were. You do not by chance have the O.E. links handy where you can measure them do you? I had to cut mine off, so do not know.

If you have the O.E. and can send me the length, I plan on adjusting mine two inches longer to make up for the lift.

Thanks
06powerwagon06 wrote:Did you leave them screwed in all the way or did you adjust them out a bit?
I'll try and get out there tomorrow and measure. It's cold and snowy up here and I have a broken leg :doh: so if anyone else can go out and measure theirs it would be much appreciated. :rockon:
'06 Black Power Wagon, Quad Cab, Heated Leather, 4" Boss Bars nerf bars, Locker Bypass, TPS Bypass, Smoked clearance lights, Tool Box, Recovery gear, Carli Front Diff Guard, Rockcrusher Rear Diff Cover, 60" Hi Lift Jack-Mounted in Tool Box, Bed Liner'd Front & Rear Bumpers, Rockers and Grill, "T" Steering Upgrade, DT ProFab Steering Brace, Kill Switch, 2-6" Aux. Lights Behind Grill, Back Up Lights, Wheel Well Liners, 315/70/17 Goodyear Wrangler Duratracs, Airflow Snorkel, Rock Rails fabbed by me, Borgeson Steering Shaft, etc..[/size]

Rausch Creek Spring '12

User avatar
FirerescuePW
1000_Posts
1000_Posts
Posts: 1661
Joined: Sun May 20, 2012 12:51 pm
Location: North Wales, PA

Re: "OX" build

Post by FirerescuePW » Sat Mar 23, 2013 9:23 am

Just checked my '05. Center to center looks like 4 7/8".
'05 Mineral Gray Power Wagon QC #1005

WINCH MOB PROUD!

SuperChips FlashPaq; DT ProFab Steering Brace; 08.5 Steering linkage (twice); Toyo Open Country M/T 35/12.50x17; Carli front diff guard; Rockcrusher rear diff cover; White Knuckle Offroad Rock Rails; Carli 3"coils, track bar, and High Clearance Control Arms; Carli King 2.5" Remote Resi Shocks; Reflex spray-in liner; Extang Trifecta tonneau cover; Pop Lock electric tailgate lock (OOS); Tekonsha Prodigy brake control; LEDS & Strobes & Siren; Winch TPS Bypass; Warn Wireless Remote; Dog hair, and a BIG Wish List!

User avatar
RedMan
250_Posts
250_Posts
Posts: 349
Joined: Sun May 27, 2012 3:10 am
Location: Jacksonville NC

Re:

Post by RedMan » Sat Mar 23, 2013 10:09 pm

FirerescuePW wrote:Just checked my '05. Center to center looks like 4 7/8".

Thanks, I am going to check mine in the morning, and adjust to 6 7/8".
Power Wagon Registry #47
- SCT Tuner by http://www.hemifevertuning.com/
- Thuren suspension upgrade (springs, shocks, and shackles)
- Thuren steering upgrade
- DT PROFAB Swaybar links (w/ +2" lift)
- Wattsenegger Front & Rear bumpers (1/4" walls)
- 35 12.50R 17 NITTO Mud Grapplers (second set)__- Snorkel
- Rock Rails_______________________- CB Radio
- RockCrusher Front Diff Cover_______- Tool box and all necessary tools
- diff locker manual switch's_______________ - Flow Master Series 50 Dual Exhaust
- Illuminated Ram Hood Emblem______- Rocker Panels Hurculined
- H2 Wheels w/moded hubcaps_______- Power Wagon Winch Strap
- Solar Battery Maintainer___________- Hide-Away Gun rack

"The" Wifes Car
"Faith" 2014 Charger RT Max

My Toy
"VISCO" 2013 196CC Tidewater

Post Reply