idtanker's Build - 2013 Power Wagon - "winchmonster"

Start your thread and show everyone your build out.
User avatar
idtanker
Posts: 26
Joined: Wed Sep 27, 2017 1:05 am
Model Year: 2013
Location: Boise, Idaho

idtanker's Build - 2013 Power Wagon - "winchmonster"

Post by idtanker » Mon Jul 02, 2018 1:56 am

20180625_145419.jpg
Attachments
1-512.jpg
Last edited by idtanker on Mon Mar 04, 2019 3:19 pm, edited 3 times in total.
2013 Power Wagon DG-540199

4.56 Gear ratio, Volant CAI, Mastercraft Courser MXT 35×12.5×17s on $500 American Racing something or others, Pedal Commander, JHD Lighting mirror mod, Grant Stott USB mod, Outlaw Products Zombieflauge Horde canvas seat covers, Onetigris seatback Molle organizers, Heka front mounted 2 inch recievers, Warn epic winch hook, cabin air filter addition with donor cover from another Ram, Wilson cell phone signal booster, modding with AlfaOBD.

User avatar
idtanker
Posts: 26
Joined: Wed Sep 27, 2017 1:05 am
Model Year: 2013
Location: Boise, Idaho

Re: "Bertha"...my 2013

Post by idtanker » Mon Jul 02, 2018 1:22 pm

mirrors.jpg
USB.jpg
Bought her in Sept. 2017, an Arizona truck. I hope to do some amazing things with her once the warranty runs out. Between this forum and the actual facebook pages dealing with PWs, I have learned alot, and hope to continue learning!

So far...testing the waters mods...

JHD Lighting sideview mirror mod
Added USB outlets to the back seat areas...left and right...
Volant CAI
American racing wheels with Mastercraft MXTs 35×12.5×17 tires
Attachments
USB2.jpg
tiresnwheels.jpg
Last edited by idtanker on Mon Jul 02, 2018 4:29 pm, edited 3 times in total.
2013 Power Wagon DG-540199

4.56 Gear ratio, Volant CAI, Mastercraft Courser MXT 35×12.5×17s on $500 American Racing something or others, Pedal Commander, JHD Lighting mirror mod, Grant Stott USB mod, Outlaw Products Zombieflauge Horde canvas seat covers, Onetigris seatback Molle organizers, Heka front mounted 2 inch recievers, Warn epic winch hook, cabin air filter addition with donor cover from another Ram, Wilson cell phone signal booster, modding with AlfaOBD.

User avatar
idtanker
Posts: 26
Joined: Wed Sep 27, 2017 1:05 am
Model Year: 2013
Location: Boise, Idaho

Re: "Bertha"...my 2013

Post by idtanker » Mon Jul 02, 2018 3:15 pm

Image



The day I picked her up.
Attachments
2017-09-21 NEW TRUCK2-2016x1512.jpg
2013 Power Wagon DG-540199

4.56 Gear ratio, Volant CAI, Mastercraft Courser MXT 35×12.5×17s on $500 American Racing something or others, Pedal Commander, JHD Lighting mirror mod, Grant Stott USB mod, Outlaw Products Zombieflauge Horde canvas seat covers, Onetigris seatback Molle organizers, Heka front mounted 2 inch recievers, Warn epic winch hook, cabin air filter addition with donor cover from another Ram, Wilson cell phone signal booster, modding with AlfaOBD.

User avatar
w2dodge
500_Posts
500_Posts
Posts: 964
Joined: Mon May 21, 2012 4:57 pm
Location: nj..ny

Re: "Bertha"...my 2013

Post by w2dodge » Tue Jul 03, 2018 3:22 pm

:cash: congrats..

User avatar
ghaugo
50_Posts
50_Posts
Posts: 150
Joined: Wed Sep 20, 2017 12:04 am
Model Year: 2012
Location: Colorado

Re: "Bertha"...my 2013

Post by ghaugo » Tue Jul 03, 2018 5:22 pm

Sweet truck. Welcome to the club! You are going to have fun. Thanks for your service. I spent my time at Ft. Carson in an M1A1 back in the day.
2012 Power Wagon
Frame-welded Aluminess Rock Sliders, Kenda Klever RT (35/12.50R17), ARE Z-Series Topper, DeeZee Tailgate Assist, Husky X-act Contour Mats, Purple Cranium Diff Covers Front and Rear, Dodge Offroad Steering Brace, Thuren Track Bar, Thuren Short Arms, Thuren Fox 2.0 Remote Reservoir Shocks, Airlifter Ultimate 5000 airbags, Daystar Cradles, High Country Customs Bumper, Dynatrac ball joints, WWSP HD Towing Valve Body, PML Transmission pan, Thuren XD Swaybar Links, Thuren XS front coils, Abel Components Full Swaybar Bypass, All AMSOIL fluids from Code4Synthetics.com

User avatar
idtanker
Posts: 26
Joined: Wed Sep 27, 2017 1:05 am
Model Year: 2013
Location: Boise, Idaho

Re: "Bertha"...my 2013

Post by idtanker » Wed Jul 04, 2018 3:30 am

w2dodge wrote:
Tue Jul 03, 2018 3:22 pm
:cash: congrats..
Thanks!...Its good to be here!
2013 Power Wagon DG-540199

4.56 Gear ratio, Volant CAI, Mastercraft Courser MXT 35×12.5×17s on $500 American Racing something or others, Pedal Commander, JHD Lighting mirror mod, Grant Stott USB mod, Outlaw Products Zombieflauge Horde canvas seat covers, Onetigris seatback Molle organizers, Heka front mounted 2 inch recievers, Warn epic winch hook, cabin air filter addition with donor cover from another Ram, Wilson cell phone signal booster, modding with AlfaOBD.

User avatar
idtanker
Posts: 26
Joined: Wed Sep 27, 2017 1:05 am
Model Year: 2013
Location: Boise, Idaho

Re: "Bertha"...my 2013

Post by idtanker » Wed Jul 04, 2018 3:34 am

ghaugo wrote:
Tue Jul 03, 2018 5:22 pm
Sweet truck. Welcome to the club! You are going to have fun. Thanks for your service. I spent my time at Ft. Carson in an M1A1 back in the day.
M1A1s, M1A1 heavies and M1A2s as well as A2 Bradleys and up, Deployed 2x as a Tanker and ended up in Humvees.... :wtf:
2013 Power Wagon DG-540199

4.56 Gear ratio, Volant CAI, Mastercraft Courser MXT 35×12.5×17s on $500 American Racing something or others, Pedal Commander, JHD Lighting mirror mod, Grant Stott USB mod, Outlaw Products Zombieflauge Horde canvas seat covers, Onetigris seatback Molle organizers, Heka front mounted 2 inch recievers, Warn epic winch hook, cabin air filter addition with donor cover from another Ram, Wilson cell phone signal booster, modding with AlfaOBD.

User avatar
coder
1000_Posts
1000_Posts
Posts: 1347
Joined: Wed Jun 06, 2012 5:18 pm
Model Year: 2007
Location: Trabuco Canyon, CA

Re: "Bertha"...my 2013

Post by coder » Thu Jul 05, 2018 7:06 pm

Welcome, congrats on the new to you Power Wagon! Does everything function properly, winch, lockers, sway-bar disconnect, etc? What are your initial impressions thus far?
Vehicle: 2007 Power Wagon Quad Cab - Factory Options (Inferno Red, Premium Cloth Bench Seat, Light Group, Automatic Transmission, Leather Steering Wheel)
Suspension: Carli 3" Hemi Coils, Carli Control Arms, Carli King 2.5 Pin-Tops, Carli Stainless Steering Stabilizer, Carli Trackbar | Synergy 1" Rear Shackle
Performance: Magnaflow Muffler | Magnaflow Y-Pipe
Wheels/Tires: Yokohama X-A/T 35x12.5x17
Steering/Drivetrain/Axles: Carli Front Diff Guard | Dynatrac Ball Joints | Mopar HD Steering Gear
Miscellaneous: Line-X Bedliner | Locker Bypass Switch | Mopar Rock Rails | Odyssey Extreme 65-PC1750T | Performance Friction Brake Pads | Weathertech Digital Fit Mats | Winch Thermal Protection Bypass

User avatar
idtanker
Posts: 26
Joined: Wed Sep 27, 2017 1:05 am
Model Year: 2013
Location: Boise, Idaho

Re: "Bertha"...my 2013

Post by idtanker » Fri Jul 06, 2018 10:41 pm

coder wrote:
Thu Jul 05, 2018 7:06 pm
Welcome, congrats on the new to you Power Wagon! Does everything function properly, winch, lockers, sway-bar disconnect, etc? What are your initial impressions thus far?
So far so good, everything seems to work as advertised, the previous owner took good care of her. It initially had 21,000 miles on it, and I have put another 12,000 since September 17.

Used the winch to pull a little 2wd patriot out of the southern Idaho mud, winch pulled it out with no issues, except having to keep rpms up. My first winching, so lesson learned.

I got her before hunting season last year, so off we go to near the Oregon border, about a 3 hour drive from Boise, and a 21ft toyhauler with my 2 quads. ( For reference, I used my 03 H2 for this run in previous years, burned half a tank for the trip, 6.0 vortec) It pulls like a champ....figure 4750lbs of trailer and add 1200lbs of quads, gear, and water...not heavy, but not bad. I come out using just under half a tank, and since ive drawn cow elk and turkey, ill be heading that way again this year. It snowed early last season, so, for fun I locked it up and used the disconnect for the swaybar to climb into a few areas I havent been before...everything worked perfectly.

All in all, I am glad my wife talked me into getting this beast, and hope to learn even more!
2013 Power Wagon DG-540199

4.56 Gear ratio, Volant CAI, Mastercraft Courser MXT 35×12.5×17s on $500 American Racing something or others, Pedal Commander, JHD Lighting mirror mod, Grant Stott USB mod, Outlaw Products Zombieflauge Horde canvas seat covers, Onetigris seatback Molle organizers, Heka front mounted 2 inch recievers, Warn epic winch hook, cabin air filter addition with donor cover from another Ram, Wilson cell phone signal booster, modding with AlfaOBD.

User avatar
idtanker
Posts: 26
Joined: Wed Sep 27, 2017 1:05 am
Model Year: 2013
Location: Boise, Idaho

Re: "Bertha"...my 2013

Post by idtanker » Fri Jul 06, 2018 10:45 pm

2018.jpg

Added 2 inch recievers this evening
Attachments
20182.jpg
2013 Power Wagon DG-540199

4.56 Gear ratio, Volant CAI, Mastercraft Courser MXT 35×12.5×17s on $500 American Racing something or others, Pedal Commander, JHD Lighting mirror mod, Grant Stott USB mod, Outlaw Products Zombieflauge Horde canvas seat covers, Onetigris seatback Molle organizers, Heka front mounted 2 inch recievers, Warn epic winch hook, cabin air filter addition with donor cover from another Ram, Wilson cell phone signal booster, modding with AlfaOBD.

User avatar
idtanker
Posts: 26
Joined: Wed Sep 27, 2017 1:05 am
Model Year: 2013
Location: Boise, Idaho

Re: "Bertha"...my 2013

Post by idtanker » Tue Jul 10, 2018 8:56 pm

Added some hooks
Attachments
IMG_20180709_150721_205.jpg
20180709_203109.jpg
2013 Power Wagon DG-540199

4.56 Gear ratio, Volant CAI, Mastercraft Courser MXT 35×12.5×17s on $500 American Racing something or others, Pedal Commander, JHD Lighting mirror mod, Grant Stott USB mod, Outlaw Products Zombieflauge Horde canvas seat covers, Onetigris seatback Molle organizers, Heka front mounted 2 inch recievers, Warn epic winch hook, cabin air filter addition with donor cover from another Ram, Wilson cell phone signal booster, modding with AlfaOBD.

User avatar
idtanker
Posts: 26
Joined: Wed Sep 27, 2017 1:05 am
Model Year: 2013
Location: Boise, Idaho

Re: "Bertha"...my 2013

Post by idtanker » Tue Jul 10, 2018 8:57 pm

idtanker wrote:
Tue Jul 10, 2018 8:56 pm
Added some hooks, hope to use this as a base for my removable brush/grill guard.
2013 Power Wagon DG-540199

4.56 Gear ratio, Volant CAI, Mastercraft Courser MXT 35×12.5×17s on $500 American Racing something or others, Pedal Commander, JHD Lighting mirror mod, Grant Stott USB mod, Outlaw Products Zombieflauge Horde canvas seat covers, Onetigris seatback Molle organizers, Heka front mounted 2 inch recievers, Warn epic winch hook, cabin air filter addition with donor cover from another Ram, Wilson cell phone signal booster, modding with AlfaOBD.

User avatar
OffroadTreks
Moderator
Moderator
Posts: 2409
Joined: Fri Mar 25, 2016 11:23 am
Model Year: 2015
Location: USA
Contact:

Re: "Bertha"...my 2013

Post by OffroadTreks » Wed Jul 11, 2018 12:17 am

More Boise people!
2015 Power Wagon Laramie - "ROCKLANDER"
-------
[Build Thread] [Instagram] [Youtube]
------
Full-Size Off-Road Events & Overland Adventures

User avatar
Bill2014
1000_Posts
1000_Posts
Posts: 1539
Joined: Fri May 09, 2014 9:03 pm
Model Year: 2014
Location: Northern NY

Re: "Bertha"...my 2013

Post by Bill2014 » Wed Jul 11, 2018 7:46 am

I assume you bolted the receivers to the mounting plate that the factory rings were bolted to? If so, beware, that factory mount is not as strong as you might hope. They will likely bend and deform if you use one of your hooks as a sole recovery point.

If you beefed up the factory ring mount, please share what you did. :wink:
2014 Power Wagon Laramie
Titan V5 2.5" Receiver Pintle Hook
Warn wireless winch controller
.188" DOM White Knuckle Rock Sliders
Locker Bypass & Nanny Kill Switch

Moab 2006

User avatar
idtanker
Posts: 26
Joined: Wed Sep 27, 2017 1:05 am
Model Year: 2013
Location: Boise, Idaho

Re: "Bertha"...my 2013

Post by idtanker » Wed Jul 11, 2018 4:17 pm

Bill2014 wrote:
Wed Jul 11, 2018 7:46 am
I assume you bolted the receivers to the mounting plate that the factory rings were bolted to? If so, beware, that factory mount is not as strong as you might hope. They will likely bend and deform if you use one of your hooks as a sole recovery point.

If you beefed up the factory ring mount, please share what you did. :wink:
Thanks for the tip, no, I did not beef them up, but...now I know and have another project, besides, I dont think I want to use them as a sole recovery point, but as an additional. Appreciate the feedback!
2013 Power Wagon DG-540199

4.56 Gear ratio, Volant CAI, Mastercraft Courser MXT 35×12.5×17s on $500 American Racing something or others, Pedal Commander, JHD Lighting mirror mod, Grant Stott USB mod, Outlaw Products Zombieflauge Horde canvas seat covers, Onetigris seatback Molle organizers, Heka front mounted 2 inch recievers, Warn epic winch hook, cabin air filter addition with donor cover from another Ram, Wilson cell phone signal booster, modding with AlfaOBD.

User avatar
idtanker
Posts: 26
Joined: Wed Sep 27, 2017 1:05 am
Model Year: 2013
Location: Boise, Idaho

Re: "Bertha"...my 2013

Post by idtanker » Wed Jul 11, 2018 4:19 pm

BoldAdventure wrote:
Wed Jul 11, 2018 12:17 am
More Boise people!
Hell yeah!...I have found we hide out on alot of the FB pages as well...gotta love Idaho!
2013 Power Wagon DG-540199

4.56 Gear ratio, Volant CAI, Mastercraft Courser MXT 35×12.5×17s on $500 American Racing something or others, Pedal Commander, JHD Lighting mirror mod, Grant Stott USB mod, Outlaw Products Zombieflauge Horde canvas seat covers, Onetigris seatback Molle organizers, Heka front mounted 2 inch recievers, Warn epic winch hook, cabin air filter addition with donor cover from another Ram, Wilson cell phone signal booster, modding with AlfaOBD.

User avatar
idtanker
Posts: 26
Joined: Wed Sep 27, 2017 1:05 am
Model Year: 2013
Location: Boise, Idaho

Re: "Bertha"...my 2013

Post by idtanker » Sat Jul 14, 2018 11:16 pm

Added new shackle mounts and 32 ton shackles, along with a Warn epic winch hook. Thinking of making one for the rear as well.
Attachments
2018JUL.jpg
2013 Power Wagon DG-540199

4.56 Gear ratio, Volant CAI, Mastercraft Courser MXT 35×12.5×17s on $500 American Racing something or others, Pedal Commander, JHD Lighting mirror mod, Grant Stott USB mod, Outlaw Products Zombieflauge Horde canvas seat covers, Onetigris seatback Molle organizers, Heka front mounted 2 inch recievers, Warn epic winch hook, cabin air filter addition with donor cover from another Ram, Wilson cell phone signal booster, modding with AlfaOBD.

User avatar
idtanker
Posts: 26
Joined: Wed Sep 27, 2017 1:05 am
Model Year: 2013
Location: Boise, Idaho

Re: "Bertha"...my 2013

Post by idtanker » Sat Jul 14, 2018 11:33 pm

idtanker wrote:
Mon Jul 02, 2018 1:22 pm
mirrors.jpgUSB.jpgBought her in Sept. 2017, an Arizona truck. I hope to do some amazing things with her once the warranty runs out. Between this forum and the actual facebook pages dealing with PWs, I have learned alot, and hope to continue learning!

So far...testing the waters mods...

JHD Lighting sideview mirror mod
Added USB outlets to the back seat areas...left and right...
Volant CAI
American racing wheels with Mastercraft MXTs 35×12.5×17 tires
Molle seatback covers
Attachments
TACTICAL2.jpg
TACTICAL.jpg
2013 Power Wagon DG-540199

4.56 Gear ratio, Volant CAI, Mastercraft Courser MXT 35×12.5×17s on $500 American Racing something or others, Pedal Commander, JHD Lighting mirror mod, Grant Stott USB mod, Outlaw Products Zombieflauge Horde canvas seat covers, Onetigris seatback Molle organizers, Heka front mounted 2 inch recievers, Warn epic winch hook, cabin air filter addition with donor cover from another Ram, Wilson cell phone signal booster, modding with AlfaOBD.

User avatar
idtanker
Posts: 26
Joined: Wed Sep 27, 2017 1:05 am
Model Year: 2013
Location: Boise, Idaho

Re: "Bertha"...my 2013

Post by idtanker » Thu Jul 19, 2018 10:58 am

Goofing around at work....while the bosses are away...
Attachments
20180719.jpg
20180719x.jpg
2013 Power Wagon DG-540199

4.56 Gear ratio, Volant CAI, Mastercraft Courser MXT 35×12.5×17s on $500 American Racing something or others, Pedal Commander, JHD Lighting mirror mod, Grant Stott USB mod, Outlaw Products Zombieflauge Horde canvas seat covers, Onetigris seatback Molle organizers, Heka front mounted 2 inch recievers, Warn epic winch hook, cabin air filter addition with donor cover from another Ram, Wilson cell phone signal booster, modding with AlfaOBD.

User avatar
Low_Sky
500_Posts
500_Posts
Posts: 957
Joined: Fri May 01, 2015 7:12 pm
Model Year: 2015
Location: Eagle River, Alaska

Re: "Bertha"...my 2013

Post by Low_Sky » Thu Jul 19, 2018 10:32 pm

idtanker wrote:
Sat Jul 14, 2018 11:16 pm
Added new shackle mounts and 32 ton shackles, along with a Warn epic winch hook. Thinking of making one for the rear as well.
Is there some big picture reason you did this? Looks like putting adapter adapters on your adapter to me.
John
Alaska
2015 PW on 2.5" Thuren Kings
My build thread

User avatar
TankerZak
500_Posts
500_Posts
Posts: 711
Joined: Sun Nov 13, 2016 1:43 pm
Model Year: 2016

Re: "Bertha"...my 2013

Post by TankerZak » Fri Jul 20, 2018 9:05 am

idtanker wrote:
ghaugo wrote:
Tue Jul 03, 2018 5:22 pm
Sweet truck. Welcome to the club! You are going to have fun. Thanks for your service. I spent my time at Ft. Carson in an M1A1 back in the day.
M1A1s, M1A1 heavies and M1A2s as well as A2 Bradleys and up, Deployed 2x as a Tanker and ended up in Humvees.... :wtf:
Hah!!! More Tankers!! M1A1 Heavy, M1A1 AIMS, Ft Hood, Korea, and Germany.

Sent from my SM-G955U using Tapatalk

2016 Granite Crystal Metallic Power Wagon Laramie, graphics delete, debadged, Thuren front and rear coils, Thuren rear swaybar links, Thuren front and rear trackbars, Traxada rear 1 inch spacers, King 3.0 (Stage 4) front and 2.5 (Stage 3) rear shocks, Boogie front bump stops, Cooper STT Pro 37x13.50R17 on XD Machette 17x9 +18 wheels, Centramatics, 5.13 gears, DOR steering brace, Thuren truss, Thuren King Steering Damper, Synergy Steering Kit, Thuren PW front bumper, Thuren rear bumper, White Knuckle rock sliders, Dethloff skid plate, Dethloff rear sway bar spacers, Purple Cranium Half Spider front and rear diff guards, Airlift 5000 Ultimate airbags with Daystar cradles, Bakflip Revolver X2 tonneau, Factor55 Ultrahook with 100ft 7/16 A.R.E. Spidersilk synthetic winch line, Zroadz Grill with slim 20 inch light bar, DDM Tuning LEDs/HIDs, Rigid Side Shooter ditch lights, KC rock lights, Rigid fog lights, Baja Designs rear lights, Magnaflow 19200 modified with upgraded resonator and after axle dump, tinted front windows 35%.

User avatar
idtanker
Posts: 26
Joined: Wed Sep 27, 2017 1:05 am
Model Year: 2013
Location: Boise, Idaho

Re: "Bertha"...my 2013

Post by idtanker » Fri Jul 20, 2018 4:21 pm

Low_Sky wrote:
Thu Jul 19, 2018 10:32 pm
idtanker wrote:
Sat Jul 14, 2018 11:16 pm
Added new shackle mounts and 32 ton shackles, along with a Warn epic winch hook. Thinking of making one for the rear as well.
Is there some big picture reason you did this? Looks like putting adapter adapters on your adapter to me.
Rubicon belongs to a fellow Instructor, not sure his setup, but he is dying to get his pavement princess to MOAB. He and his wife are jeep fans, and he has dine all the work himself, at least I think he has. Please dont ask if he has experience in these things, im pretty sure its "oooooh look at that!"....and it ends up on the jeep.
2013 Power Wagon DG-540199

4.56 Gear ratio, Volant CAI, Mastercraft Courser MXT 35×12.5×17s on $500 American Racing something or others, Pedal Commander, JHD Lighting mirror mod, Grant Stott USB mod, Outlaw Products Zombieflauge Horde canvas seat covers, Onetigris seatback Molle organizers, Heka front mounted 2 inch recievers, Warn epic winch hook, cabin air filter addition with donor cover from another Ram, Wilson cell phone signal booster, modding with AlfaOBD.

User avatar
idtanker
Posts: 26
Joined: Wed Sep 27, 2017 1:05 am
Model Year: 2013
Location: Boise, Idaho

Re: "Bertha"...my 2013

Post by idtanker » Fri Jul 20, 2018 4:24 pm

Low_Sky wrote:
Thu Jul 19, 2018 10:32 pm
idtanker wrote:
Sat Jul 14, 2018 11:16 pm
Added new shackle mounts and 32 ton shackles, along with a Warn epic winch hook. Thinking of making one for the rear as well.
Is there some big picture reason you did this? Looks like putting adapter adapters on your adapter to me.
Rubicon belongs to a fellow Instructor, not sure his setup, but he is dying to get his pavement princess to MOAB. He and his wife are jeep fans, and he has dine all the work himself, at least I think he has. Please dont ask if he has experience in these things, im pretty sure its "oooooh look at that!"....and it ends up on the jeep.

As for Bertha, I was just playing around...the ramp is really for boresighting the Tanks, and well, one thing led to another....
2013 Power Wagon DG-540199

4.56 Gear ratio, Volant CAI, Mastercraft Courser MXT 35×12.5×17s on $500 American Racing something or others, Pedal Commander, JHD Lighting mirror mod, Grant Stott USB mod, Outlaw Products Zombieflauge Horde canvas seat covers, Onetigris seatback Molle organizers, Heka front mounted 2 inch recievers, Warn epic winch hook, cabin air filter addition with donor cover from another Ram, Wilson cell phone signal booster, modding with AlfaOBD.

User avatar
idtanker
Posts: 26
Joined: Wed Sep 27, 2017 1:05 am
Model Year: 2013
Location: Boise, Idaho

Re:

Post by idtanker » Fri Jul 20, 2018 6:52 pm

:patriot:
TankerZak wrote:
Fri Jul 20, 2018 9:05 am
idtanker wrote:
ghaugo wrote:
Tue Jul 03, 2018 5:22 pm
Sweet truck. Welcome to the club! You are going to have fun. Thanks for your service. I spent my time at Ft. Carson in an M1A1 back in the day.
M1A1s, M1A1 heavies and M1A2s as well as A2 Bradleys and up, Deployed 2x as a Tanker and ended up in Humvees.... :wtf:
Hah!!! More Tankers!! M1A1 Heavy, M1A1 AIMS, Ft Hood, Korea, and Germany.

Sent from my SM-G955U using Tapatalk
2013 Power Wagon DG-540199

4.56 Gear ratio, Volant CAI, Mastercraft Courser MXT 35×12.5×17s on $500 American Racing something or others, Pedal Commander, JHD Lighting mirror mod, Grant Stott USB mod, Outlaw Products Zombieflauge Horde canvas seat covers, Onetigris seatback Molle organizers, Heka front mounted 2 inch recievers, Warn epic winch hook, cabin air filter addition with donor cover from another Ram, Wilson cell phone signal booster, modding with AlfaOBD.

User avatar
Low_Sky
500_Posts
500_Posts
Posts: 957
Joined: Fri May 01, 2015 7:12 pm
Model Year: 2015
Location: Eagle River, Alaska

Re: "Bertha"...my 2013

Post by Low_Sky » Sat Jul 21, 2018 3:06 am

idtanker wrote:
Low_Sky wrote:
Thu Jul 19, 2018 10:32 pm
idtanker wrote:
Sat Jul 14, 2018 11:16 pm
Added new shackle mounts and 32 ton shackles, along with a Warn epic winch hook. Thinking of making one for the rear as well.
Is there some big picture reason you did this? Looks like putting adapter adapters on your adapter to me.
Rubicon belongs to a fellow Instructor, not sure his setup, but he is dying to get his pavement princess to MOAB. He and his wife are jeep fans, and he has dine all the work himself, at least I think he has. Please dont ask if he has experience in these things, im pretty sure its "oooooh look at that!"....and it ends up on the jeep.

As for Bertha, I was just playing around...the ramp is really for boresighting the Tanks, and well, one thing led to another....
Never seen a steel plumb and sync ramp (we had concrete ramps at Hood), but I was asking about the frame horn to hitch receiver to hitch adapter to shackle setup.


Sent from my iPhone using Tapatalk
John
Alaska
2015 PW on 2.5" Thuren Kings
My build thread

Post Reply