idtanker's Build - 2013 Power Wagon - "winchmonster"

Start your thread and show everyone your build out.
User avatar
idtanker
Posts: 26
Joined: Wed Sep 27, 2017 1:05 am
Model Year: 2013
Location: Boise, Idaho

Re:

Post by idtanker » Sat Jul 21, 2018 2:13 pm

Low_Sky wrote:
Sat Jul 21, 2018 3:06 am
idtanker wrote:
Low_Sky wrote:
Thu Jul 19, 2018 10:32 pm


Is there some big picture reason you did this? Looks like putting adapter adapters on your adapter to me.
Rubicon belongs to a fellow Instructor, not sure his setup, but he is dying to get his pavement princess to MOAB. He and his wife are jeep fans, and he has dine all the work himself, at least I think he has. Please dont ask if he has experience in these things, im pretty sure its "oooooh look at that!"....and it ends up on the jeep.

As for Bertha, I was just playing around...the ramp is really for boresighting the Tanks, and well, one thing led to another....
Never seen a steel plumb and sync ramp (we had concrete ramps at Hood), but I was asking about the frame horn to hitch receiver to hitch adapter to shackle setup.


Sent from my iPhone using Tapatalk
No, just replaced the original tow hooks out...building a grill guard out of an old Hummer brushguard, plan on using the adapters for mounting it. Just a project that is slowly evolving. I like the look and adaptability of using the recievers up front.
2013 Power Wagon DG-540199

4.56 Gear ratio, Volant CAI, Mastercraft Courser MXT 35×12.5×17s on $500 American Racing something or others, Pedal Commander, JHD Lighting mirror mod, Grant Stott USB mod, Outlaw Products Zombieflauge Horde canvas seat covers, Onetigris seatback Molle organizers, Heka front mounted 2 inch recievers, Warn epic winch hook, cabin air filter addition with donor cover from another Ram, Wilson cell phone signal booster, modding with AlfaOBD.

User avatar
idtanker
Posts: 26
Joined: Wed Sep 27, 2017 1:05 am
Model Year: 2013
Location: Boise, Idaho

Re: Re:

Post by idtanker » Sat Jul 21, 2018 8:20 pm

idtanker wrote:
Sat Jul 21, 2018 2:13 pm
Low_Sky wrote:
Sat Jul 21, 2018 3:06 am
idtanker wrote:
Rubicon belongs to a fellow Instructor, not sure his setup, but he is dying to get his pavement princess to MOAB. He and his wife are jeep fans, and he has dine all the work himself, at least I think he has. Please dont ask if he has experience in these things, im pretty sure its "oooooh look at that!"....and it ends up on the jeep.

As for Bertha, I was just playing around...the ramp is really for boresighting the Tanks, and well, one thing led to another....
Never seen a steel plumb and sync ramp (we had concrete ramps at Hood), but I was asking about the frame horn to hitch receiver to hitch adapter to shackle setup.


Sent from my iPhone using Tapatalk
No, just replaced the original tow hooks out...building a grill guard out of an old Hummer brushguard, plan on using the adapters for mounting it. Just a project that is slowly evolving. I like the look and adaptability of using the recievers up front.
The steel plumb and sync ramps arw our own...the schoolhouses...so the kilo cell can move them around, range control also has a few sets, so they can move them to any range a unit wants to.
2013 Power Wagon DG-540199

4.56 Gear ratio, Volant CAI, Mastercraft Courser MXT 35×12.5×17s on $500 American Racing something or others, Pedal Commander, JHD Lighting mirror mod, Grant Stott USB mod, Outlaw Products Zombieflauge Horde canvas seat covers, Onetigris seatback Molle organizers, Heka front mounted 2 inch recievers, Warn epic winch hook, cabin air filter addition with donor cover from another Ram, Wilson cell phone signal booster, modding with AlfaOBD.

User avatar
idtanker
Posts: 26
Joined: Wed Sep 27, 2017 1:05 am
Model Year: 2013
Location: Boise, Idaho

Re: "Bertha"...my 2013

Post by idtanker » Wed Jul 25, 2018 9:26 pm

Added the cabin air filter today...was a little rough, used an exacto blade, seemed easier than a dremel, and less mess. A 5 minute job.
Attachments
20180725_1.jpg
2013 Power Wagon DG-540199

4.56 Gear ratio, Volant CAI, Mastercraft Courser MXT 35×12.5×17s on $500 American Racing something or others, Pedal Commander, JHD Lighting mirror mod, Grant Stott USB mod, Outlaw Products Zombieflauge Horde canvas seat covers, Onetigris seatback Molle organizers, Heka front mounted 2 inch recievers, Warn epic winch hook, cabin air filter addition with donor cover from another Ram, Wilson cell phone signal booster, modding with AlfaOBD.

User avatar
idtanker
Posts: 26
Joined: Wed Sep 27, 2017 1:05 am
Model Year: 2013
Location: Boise, Idaho

Re: idtanker's Build - 2013 Power Wagon - "winchmonster"

Post by idtanker » Sat Apr 27, 2019 7:18 pm

Retired BLM Rig's nanny kill switch installed.
Attachments
20190427_171443.jpg
IMG_20190425_180355_364.jpg
2013 Power Wagon DG-540199

4.56 Gear ratio, Volant CAI, Mastercraft Courser MXT 35×12.5×17s on $500 American Racing something or others, Pedal Commander, JHD Lighting mirror mod, Grant Stott USB mod, Outlaw Products Zombieflauge Horde canvas seat covers, Onetigris seatback Molle organizers, Heka front mounted 2 inch recievers, Warn epic winch hook, cabin air filter addition with donor cover from another Ram, Wilson cell phone signal booster, modding with AlfaOBD.

User avatar
idtanker
Posts: 26
Joined: Wed Sep 27, 2017 1:05 am
Model Year: 2013
Location: Boise, Idaho

Re: idtanker's Build - 2013 Power Wagon - "winchmonster"

Post by idtanker » Sat Apr 27, 2019 7:21 pm

Line-X of Boise, Idaho.
Attachments
20190427_172018.jpg
2013 Power Wagon DG-540199

4.56 Gear ratio, Volant CAI, Mastercraft Courser MXT 35×12.5×17s on $500 American Racing something or others, Pedal Commander, JHD Lighting mirror mod, Grant Stott USB mod, Outlaw Products Zombieflauge Horde canvas seat covers, Onetigris seatback Molle organizers, Heka front mounted 2 inch recievers, Warn epic winch hook, cabin air filter addition with donor cover from another Ram, Wilson cell phone signal booster, modding with AlfaOBD.

User avatar
olyelr
2000_Posts
2000_Posts
Posts: 3658
Joined: Sun Dec 07, 2014 9:00 pm
Model Year: 2016
Location: Kewadin, MI

Re: idtanker's Build - 2013 Power Wagon - "winchmonster"

Post by olyelr » Sat Apr 27, 2019 9:04 pm

looking good!! Slowly plugging away!
2016 Ram Power Wagon Laramie - Granite Crystal Metallic - Ramboxes - 35” AT3W - TazerRAM

:patriot:

Post Reply