Start your thread and show everyone your build out.
-
TommyG
- 250_Posts

- Posts: 269
- Joined: Sun Oct 05, 2014 12:41 pm
- Model Year: 2012
Post
by TommyG » Mon Sep 25, 2017 11:48 am
Great looking truck.
2012 Power Wagon
White Knuckle Sliders, myoung locker bypass, more to follow
-
Colibri
- 1000_Posts

- Posts: 1424
- Joined: Mon Jun 08, 2015 3:44 pm
- Model Year: 2009
Post
by Colibri » Mon Sep 25, 2017 1:37 pm
Very nice! Congratulations on the truck and the new whippersnapper!
Central Texas and Houston area
2009 5.7 auto quadcab
Carli 3” coils deaver leafs 3” kings with 4 tube bypass rear and fr/rr hydro bumps
Howe steering pump and gear with hydraulic ram assist
Custom tube bumpers and white knuckle sliders
Creative fab trussed axle. rem polished and cryoed 5.13 gears with arb lockers fr/rr
Sharadon stage 2 545rfe with 3000 stall edge converter
Lots of other stuff lol
-
rkgzx9leftcoast
- 50_Posts

- Posts: 229
- Joined: Mon Oct 10, 2016 9:38 am
- Model Year: 2014
- Location: Mesa Arizona
Post
by rkgzx9leftcoast » Mon Sep 25, 2017 3:14 pm
Nice looking truck. I have a 2016 Tradesman Paper truck as well.... Nice addition. I was torn between the Saltas and the Methods I wound up getting.... Looks like I would have been fine either way. Congrats !
2016 Tradesman White, adding mods now, 37 Ridge Grapplers on Method Standards 17 x 8.5 x 5.75 BS, Thuren Overland front 1.5" Kit. SLT Grill, Mopar Steps. More Thuren stuff soon....
-
coder
- 1000_Posts

- Posts: 1207
- Joined: Wed Jun 06, 2012 3:18 pm
- Model Year: 2007
- Location: Ladera Ranch, CA
Post
by coder » Tue Sep 26, 2017 4:36 pm
Hello xonetruthcrewx,
Welcome, nice truck, good set of mods!
Vehicle: 2007 Power Wagon Quad Cab - Inferno Red
Suspension: Carli 3" Hemi Coils, Carli Control Arms, Carli King 2.5 Pin-Tops, Carli Stainless Steering Stabilizer, Carli Trackbar | Synergy 1" Rear Shackle
Performance: Magnaflow Muffler | Magnaflow Y-Pipe
Wheels/Tires: Toyo AT II's 35x12.5x17
Steering/Drivetrain/Axles: Carli Front Diff Guard | Dynatrac Ball Joints | Mopar HD Steering Gear
Miscellaneous: Line-X Bedliner | Locker Bypass Switch | Mopar Rock Rails | DieHard Platinum Battery G65 | Performance Friction Brake Pads | Weathertech Digital Fit Mats | Winch Thermal Protection Bypass
-
FirerescuePW
- 1000_Posts

- Posts: 1565
- Joined: Sun May 20, 2012 10:51 am
- Location: North Wales, PA
Post
by FirerescuePW » Wed Sep 27, 2017 4:48 am
Welcome! That looks great just like it sits. Well done, and good luck!
Sent from my SM-G935P using Tapatalk
'05 Mineral Gray Power Wagon QC #1005
WINCH MOB PROUD!
SuperChips FlashPaq; DT ProFab Steering Brace; 08.5 Steering linkage (twice); Toyo Open Country M/T 35/12.50x17; Carli front diff guard; Rockcrusher rear diff cover; White Knuckle Offroad Rock Rails; Carli 3"coils, track bar, and High Clearance Control Arms; Carli King 2.5" Remote Resi Shocks; Reflex spray-in liner; Extang Trifecta tonneau cover; Pop Lock electric tailgate lock (OOS); Tekonsha Prodigy brake control; LEDS & Strobes & Siren; Winch TPS Bypass; Warn Wireless Remote; Dog hair, and a BIG Wish List!
-
xonetruthcrewx
- Posts: 15
- Joined: Thu Aug 03, 2017 1:43 pm
- Model Year: 2014
Post
by xonetruthcrewx » Wed Sep 27, 2017 10:22 am
Thanks guys! I really wanted to run 37s but the kids really struggle to get into the truck on their own even with the stock 33s, haha. Had to compromise this go around but when these wear out... 37s!
With the weight of the shell the truck now sits with a 1.5" rake which definitely looks good with the 35s. By the time I'm ready for new tires I hoping I can convince the wife that I NEED a full suspension upgrade! Haha.
-
feeesh
- Posts: 13
- Joined: Thu Mar 03, 2016 9:22 pm
- Model Year: 2013
Post
by feeesh » Wed Sep 27, 2017 11:34 am
Welcome!
Great looking truck.
I recognize your handle from somewhere.... were you on audizine in the past?
-
xonetruthcrewx
- Posts: 15
- Joined: Thu Aug 03, 2017 1:43 pm
- Model Year: 2014
Post
by xonetruthcrewx » Thu Sep 28, 2017 8:23 am
feeesh wrote:Welcome!
Great looking truck.
I recognize your handle from somewhere.... were you on audizine in the past?
Haha, thats me! Audis are all gone these days. Now its just the fam, trucks, bicyles and guns...
-
olyelr
- 2000_Posts

- Posts: 2854
- Joined: Sun Dec 07, 2014 8:00 pm
- Model Year: 2014
- Location: Kewadin, MI
Post
by olyelr » Thu Sep 28, 2017 9:08 pm
Nice! The line-ex bumpers will really tie it all in for sure. The chrome bumpers always seemed out of place to me on the tradesmans.
You might as well sneak in some WK sliders while your at it... you know, so the family can get in easier

2016 Ram Power Wagon Laramie - Granite Crystal Metallic - Ramboxes

-
xonetruthcrewx
- Posts: 15
- Joined: Thu Aug 03, 2017 1:43 pm
- Model Year: 2014
Post
by xonetruthcrewx » Fri Sep 29, 2017 7:47 am
olyelr wrote:Nice! The line-ex bumpers will really tie it all in for sure. The chrome bumpers always seemed out of place to me on the tradesmans.
You might as well sneak in some WK sliders while your at it... you know, so the family can get in easier

Yes, those are definitely on the list! Hes only 90 minutes from me as well so I can just go pick them up. Hopefully sooner than later.
-
TwinStick
- 2000_Posts

- Posts: 4000
- Joined: Mon May 28, 2012 5:58 pm
- Model Year: 2008
Post
by TwinStick » Wed Oct 04, 2017 7:09 pm
That is a great looking truck. If I got a new one, that is exactly what I would get. I am loving our ARE MX series cap though, no windows just body colored win-doors. I am also rocking the factory chrome front bumper & a Yakima Load Warrior rack on the cap.

In WNY State. 2008 Red QC PW G56. No lift yet, stock size tires. It pulls an 18' 2016 Starcraft AR One Extreme, 3500 lbs.
Load Pro 35 helper springs. 2015 A.R.E. MX Series custom cap. PCP front diff cover protector. Mag-Hytec 6 qt rear diff cover. K&N replacement air filter only. Dual grounded throttle body. Winch TPC bypass. Fab Four rear bumper. DURA BAK lined rocker protection. And a bunch of new front end stuff.
G-56 Gear ratios: 1st) 6.29:1 2nd) 3.48:1 3rd) 2.10:1 4th) 1.38:1 5th) 1.0:1 6th) 0.79:1 Rev 6.29:1 --- = 78.01613:1 Crawl Ratio
-------------------------5.94:1--------3.28:1-------1.98:1-------1.31:1-------1.0:1-------0.74:1-----5.42:1 ---- = 73.675:1
545RFE----------------3.0:1---------1.67:1--------1.0:1--------0.75:1-------0.67:1------------------3.0:1 -------=37.21:1
2013+ 32.47 crawl ratio...............Can you see the trend ??????????????
-
2011TXPowerWagon
- 250_Posts

- Posts: 496
- Joined: Fri Aug 08, 2014 3:07 pm
- Model Year: 2011
- Location: Edinburg, Texas
Post
by 2011TXPowerWagon » Thu Oct 05, 2017 4:35 pm
Nice looking truck. Love the look of the shell, personally i like it without the roof rack. But sweet truck for sure. I am always torn between graphics on or off but yours definitely looks good. Congrats on the new truck and the new baby.
"A government that robs Peter to pay Paul can always depend on the support of Paul."
-George Bernard Shaw
-
Mule007
- 50_Posts

- Posts: 83
- Joined: Mon May 16, 2016 7:27 pm
- Location: Colton, Oregon
Post
by Mule007 » Sun Oct 08, 2017 5:58 am
Nice looking truck! Like the shell too ! Welcome and Congrats on the new truck and baby!
2005 Mineral Gray PW; Alloquin 3" rock rails w/low profile steps; 2.5" Skyjacker suspension lift kit; Toyo Open Country AT II Extreme-35 x 12.5 x 17 10 ply's; McQuay-Norris Extreme ball joints; T-steering upgrade w/Bilstein 5100 steering damper; Bilstein 5100 Mono tube nitrogen gas shocks; Denso 180 amp alternator, Interstate Mega-tron 850 CCA HD battery; MoPar rear wheel well liners, black accent fender flares, remote start, and Ravelco Anti theft device; Hopkins Trailer Mate trailer brake controller; Hemi 1 ton transmission cooler; Uniden Bearcat Pro 68XL CB radio; Linex Platinum black armor truck bed & lower rock panel armor coating; Matching Range Rider cab high fiberglass canopy; 2" Linex (matches Alloquin) round brush guard light bar w/ 4- KC HiLites Rally 400 Series 4" Halogen Driving/off road lights; Dyna-flow cat back dual exhaust; GT Platinum srt-10 A-pillar pod mount programmable performance chip, monitor, tuner; an S&B CAI.
-
xonetruthcrewx
- Posts: 15
- Joined: Thu Aug 03, 2017 1:43 pm
- Model Year: 2014
Post
by xonetruthcrewx » Wed Oct 11, 2017 1:11 pm
2011TXPowerWagon wrote: ↑Thu Oct 05, 2017 4:35 pm
Nice looking truck. Love the look of the shell, personally i like it without the roof rack. But sweet truck for sure. I am always torn between graphics on or off but yours definitely looks good. Congrats on the new truck and the new baby.
Thanks! And yeah, looked cleaner without the basket but it comes in handy at times. Function>fashion... haha.
-
xonetruthcrewx
- Posts: 15
- Joined: Thu Aug 03, 2017 1:43 pm
- Model Year: 2014
Post
by xonetruthcrewx » Tue Jan 02, 2018 8:52 am
Took a couple weeks off from work for the holidays and finally had the time to pull the bumpers and have them sprayed with line-x. I feel like it should have come this way from the factory...

-
olyelr
- 2000_Posts

- Posts: 2854
- Joined: Sun Dec 07, 2014 8:00 pm
- Model Year: 2014
- Location: Kewadin, MI
Post
by olyelr » Tue Jan 02, 2018 10:43 am
Looooookin' good!
2016 Ram Power Wagon Laramie - Granite Crystal Metallic - Ramboxes

-
Colibri
- 1000_Posts

- Posts: 1424
- Joined: Mon Jun 08, 2015 3:44 pm
- Model Year: 2009
Post
by Colibri » Thu Jan 04, 2018 9:24 am
Very nice!
Central Texas and Houston area
2009 5.7 auto quadcab
Carli 3” coils deaver leafs 3” kings with 4 tube bypass rear and fr/rr hydro bumps
Howe steering pump and gear with hydraulic ram assist
Custom tube bumpers and white knuckle sliders
Creative fab trussed axle. rem polished and cryoed 5.13 gears with arb lockers fr/rr
Sharadon stage 2 545rfe with 3000 stall edge converter
Lots of other stuff lol
-
nts007
- 2000_Posts

- Posts: 2254
- Joined: Wed Dec 11, 2013 9:01 pm
- Model Year: 2008
- Location: Sask, Canada, Earth
Post
by nts007 » Sat Jan 06, 2018 9:33 pm
Nice rig!!
08 ctd--mini max--thuren 3" coils and shackles--4.56 gears and lockers in pw axles--some lights--afe intake system--bd super b turbo--Banks w/m Injection--Dynatrac Balljoints--king 2.5"s--37" Hankook Dynapro MT--DOR Long arms--Custom emf track bar--Manual T-case swap--Full PW Under armor--PSC Hydro Assist
-
olyelr
- 2000_Posts

- Posts: 2854
- Joined: Sun Dec 07, 2014 8:00 pm
- Model Year: 2014
- Location: Kewadin, MI
Post
by olyelr » Mon Mar 19, 2018 9:41 am
2016 Ram Power Wagon Laramie - Granite Crystal Metallic - Ramboxes

-
Bill2014
- 500_Posts

- Posts: 749
- Joined: Fri May 09, 2014 7:03 pm
- Model Year: 2014
- Location: Northern NY
Post
by Bill2014 » Mon Mar 19, 2018 9:47 am
Nice!
Will you be getting some rock sliders on that bad boy?
2014 Power Wagon Laramie
Titan V5 2.5" Receiver Pintle Hook
Warn wireless winch controller
.188" DOM White Knuckle Rock Sliders
Locker Bypass
Moab 2006
-
xonetruthcrewx
- Posts: 15
- Joined: Thu Aug 03, 2017 1:43 pm
- Model Year: 2014
Post
by xonetruthcrewx » Tue Mar 20, 2018 8:53 am
Bill2014 wrote: ↑Mon Mar 19, 2018 9:47 am
Nice!
Will you be getting some rock sliders on that bad boy?
Definitely on the list! I'm only an hour and a half from White Knuckle too so I can just go pick them up. My issue... wife put me on an allowance some time ago and between bikes, guns and the truck I'm spread pretty thin and I need to save up. Haha.
-
xonetruthcrewx
- Posts: 15
- Joined: Thu Aug 03, 2017 1:43 pm
- Model Year: 2014
Post
by xonetruthcrewx » Tue Mar 20, 2018 8:56 am
And if anyone cares, drivers perspective of going down Devils Staircase. Nothing too serious (although my buddy thought I was going to die) but it was definitely fun.
Clickable link for Tapatalk