Board index General Member Builds

Start your thread and show everyone your build out.

Re: BoldAdventures 2015 Power Wagon Build

Postby MikeKey » Thu Feb 09, 2017 1:31 pm

Thanks for spamming my build thread.
15 PW Laramie w/ Ramboxes, 35" Toyo AT's, Custom High Clearance Bumper, WKOR Sliders, Purple Cranium Diff Covers, K&N, Magnaflow, AEV Intake
[Build Thread] [Instagram]
User avatar
MikeKey
500_Posts
 
Posts: 778
Joined: Fri Mar 25, 2016 9:23 am
Location: Boise, Idaho

Re: BoldAdventures 2015 Power Wagon Build

Postby olyelr » Thu Feb 09, 2017 2:36 pm

My apologies, MikeKey. Although that was not my intentions, that is exactly what I did. I will delete that add.
2016 Ram Power Wagon Laramie - Granite Crystal Metallic - Ramboxes
- A virgin, other than White Knuckle sliders... and lots of Fluid Film -
User avatar
olyelr
2000_Posts
 
Posts: 2063
Joined: Sun Dec 07, 2014 8:00 pm
Location: Kewadin, MI

Re: BoldAdventures 2015 Power Wagon Build

Postby MikeKey » Fri Feb 10, 2017 4:58 pm

:poke: :thppt:
15 PW Laramie w/ Ramboxes, 35" Toyo AT's, Custom High Clearance Bumper, WKOR Sliders, Purple Cranium Diff Covers, K&N, Magnaflow, AEV Intake
[Build Thread] [Instagram]
User avatar
MikeKey
500_Posts
 
Posts: 778
Joined: Fri Mar 25, 2016 9:23 am
Location: Boise, Idaho

Re: BoldAdventures 2015 Power Wagon Build

Postby MikeKey » Thu Apr 13, 2017 10:41 am

Been slow on updates with a lot going on. Bumper is still in progress and will hopefully arrive before Moab event, but Kye sent me a progress pic.

In the meantime, truck needs new brakes, I've used Power Stop and Hawk in the past. But the reviews from others who tow made me nervous. So Severe Duty Wagners for now. Also picked up an AEV raised Air intake and Dodge Offroad Steering Brace.

Hope to get some things done this weekend. :popcorn:
Attachments
stuff-for-truck.jpg
unnamed.jpg
Last edited by MikeKey on Thu Apr 13, 2017 12:04 pm, edited 1 time in total.
15 PW Laramie w/ Ramboxes, 35" Toyo AT's, Custom High Clearance Bumper, WKOR Sliders, Purple Cranium Diff Covers, K&N, Magnaflow, AEV Intake
[Build Thread] [Instagram]
User avatar
MikeKey
500_Posts
 
Posts: 778
Joined: Fri Mar 25, 2016 9:23 am
Location: Boise, Idaho

Re: BoldAdventures 2015 Power Wagon Build

Postby DamageWagon » Thu Apr 13, 2017 10:53 am

AWWWWWW you got a snorkel! Dang I'm jealous! Post up some install pics! If you need help installing it and can wait a little while I would be happy to do it for you. And build you a RTT rack haha. Way to go Mike, good moves all around!


Sent from my safe space
User avatar
DamageWagon
1000_Posts
 
Posts: 1049
Joined: Mon Oct 10, 2016 11:21 pm

Re: BoldAdventures 2015 Power Wagon Build

Postby nts007 » Thu Apr 13, 2017 12:01 pm

Some brakes n some steering brace and some hidden items haha. Awesome bud!!
08 ctd--mini max--thuren 3" coils and shackles--4.56 gears and lockers in pw axles--some lights--afe intake system--bd super b turbo--Banks w/m Injection--Dynatrac Balljoints--bilstein 7100s--37" Cooper ST-Maxx--DOR Long arms--Carli track bar--Manual T-case swap--Full PW Under armor--PSC Hydro Assist
User avatar
nts007
1000_Posts
 
Posts: 1966
Joined: Wed Dec 11, 2013 9:01 pm
Location: Sask, Canada, Earth

Re: BoldAdventures 2015 Power Wagon Build

Postby Hammerballs » Thu Apr 13, 2017 1:07 pm

Jealous! Your truck is going to look EXACTLY the way I want mine. You're just many steps ahead. The install of that AEV air intake scares me though. :-/

Sent from my XT1254 using Tapatalk
Hammerballs
50_Posts
 
Posts: 58
Joined: Mon Dec 19, 2016 4:30 pm

Re: BoldAdventures 2015 Power Wagon Build

Postby DamageWagon » Thu Apr 13, 2017 1:15 pm

Taking a 6" hole saw to your truck is a little worrisome... Taking a 6" hole saw to someone else's truck? Not a problem once you're used to it.


Sent from my safe space
User avatar
DamageWagon
1000_Posts
 
Posts: 1049
Joined: Mon Oct 10, 2016 11:21 pm

Re: BoldAdventures 2015 Power Wagon Build

Postby MikeKey » Thu Apr 13, 2017 2:47 pm

I was just going to use my Air Saw like the directions say. I'd rather not mess with a 6 inch hole saw. The biggest I have is 4.5 inches anyways.
15 PW Laramie w/ Ramboxes, 35" Toyo AT's, Custom High Clearance Bumper, WKOR Sliders, Purple Cranium Diff Covers, K&N, Magnaflow, AEV Intake
[Build Thread] [Instagram]
User avatar
MikeKey
500_Posts
 
Posts: 778
Joined: Fri Mar 25, 2016 9:23 am
Location: Boise, Idaho

Re: BoldAdventures 2015 Power Wagon Build

Postby Reloaderguy » Fri Apr 14, 2017 9:01 am

I'll be in Boise in two weeks. I'd be happy to drill holes in your truck while you cover your eyes.
Best Year Power Wagon
User avatar
Reloaderguy
1000_Posts
 
Posts: 1094
Joined: Tue Feb 09, 2016 7:06 am
Location: Oregon

Re: BoldAdventures 2015 Power Wagon Build

Postby MikeKey » Fri Apr 14, 2017 1:37 pm

Some things a man needs to do himself. 8-)
15 PW Laramie w/ Ramboxes, 35" Toyo AT's, Custom High Clearance Bumper, WKOR Sliders, Purple Cranium Diff Covers, K&N, Magnaflow, AEV Intake
[Build Thread] [Instagram]
User avatar
MikeKey
500_Posts
 
Posts: 778
Joined: Fri Mar 25, 2016 9:23 am
Location: Boise, Idaho

Re: BoldAdventures 2015 Power Wagon Build

Postby DamageWagon » Fri Apr 14, 2017 2:04 pm

I thought your wife was doing it?


Sent from my safe space
User avatar
DamageWagon
1000_Posts
 
Posts: 1049
Joined: Mon Oct 10, 2016 11:21 pm

Re: BoldAdventures 2015 Power Wagon Build

Postby MikeKey » Fri Apr 14, 2017 9:00 pm

DamageWagon wrote:I thought your wife was doing it?


Har Har. No :thppt:
15 PW Laramie w/ Ramboxes, 35" Toyo AT's, Custom High Clearance Bumper, WKOR Sliders, Purple Cranium Diff Covers, K&N, Magnaflow, AEV Intake
[Build Thread] [Instagram]
User avatar
MikeKey
500_Posts
 
Posts: 778
Joined: Fri Mar 25, 2016 9:23 am
Location: Boise, Idaho

Re: BoldAdventures 2015 Power Wagon Build

Postby nts007 » Fri Apr 14, 2017 9:15 pm

She's not well versed in the spinner hammer thingy
08 ctd--mini max--thuren 3" coils and shackles--4.56 gears and lockers in pw axles--some lights--afe intake system--bd super b turbo--Banks w/m Injection--Dynatrac Balljoints--bilstein 7100s--37" Cooper ST-Maxx--DOR Long arms--Carli track bar--Manual T-case swap--Full PW Under armor--PSC Hydro Assist
User avatar
nts007
1000_Posts
 
Posts: 1966
Joined: Wed Dec 11, 2013 9:01 pm
Location: Sask, Canada, Earth

Re: BoldAdventures 2015 Power Wagon Build

Postby MikeKey » Sat Apr 15, 2017 12:28 pm

AEV Raised Air Ram intake install

The setup ....
Image

No turning back now
Image

Completed install
Image
15 PW Laramie w/ Ramboxes, 35" Toyo AT's, Custom High Clearance Bumper, WKOR Sliders, Purple Cranium Diff Covers, K&N, Magnaflow, AEV Intake
[Build Thread] [Instagram]
User avatar
MikeKey
500_Posts
 
Posts: 778
Joined: Fri Mar 25, 2016 9:23 am
Location: Boise, Idaho

Re: BoldAdventures 2015 Power Wagon Build

Postby Colibri » Sat Apr 15, 2017 1:29 pm

Looking good sir! :rockon:
Colibri
500_Posts
 
Posts: 986
Joined: Mon Jun 08, 2015 3:44 pm

Re: BoldAdventures 2015 Power Wagon Build

Postby Hammerballs » Sat Apr 15, 2017 1:36 pm

Nicely done MikeKey! Drool. I need to do that. Looks so sweet.

Sent from my XT1254 using Tapatalk
Hammerballs
50_Posts
 
Posts: 58
Joined: Mon Dec 19, 2016 4:30 pm

Re: BoldAdventures 2015 Power Wagon Build

Postby nts007 » Sat Apr 15, 2017 1:39 pm

There's the only thing I like from aev. Nice job bud!! The first cut is always the worst
08 ctd--mini max--thuren 3" coils and shackles--4.56 gears and lockers in pw axles--some lights--afe intake system--bd super b turbo--Banks w/m Injection--Dynatrac Balljoints--bilstein 7100s--37" Cooper ST-Maxx--DOR Long arms--Carli track bar--Manual T-case swap--Full PW Under armor--PSC Hydro Assist
User avatar
nts007
1000_Posts
 
Posts: 1966
Joined: Wed Dec 11, 2013 9:01 pm
Location: Sask, Canada, Earth

Re: BoldAdventures 2015 Power Wagon Build

Postby Limamikemike » Sun Apr 16, 2017 1:11 pm

Looks great, Is there any attaching points going up the A-pillar?
2015 Bright White Powerwagon Laramie, Aluminess Sliders, RED light bar w 4 Arb Intensity clones and spod touchscreen, Factor 55 flat link, Thuren 2" coils and rear track bar, King steering stab.
Limamikemike
50_Posts
 
Posts: 116
Joined: Fri Mar 27, 2015 9:21 pm
Location: Edmonton

Re: BoldAdventures 2015 Power Wagon Build

Postby MikeKey » Sun Apr 16, 2017 1:50 pm

Limamikemike wrote:Looks great, Is there any attaching points going up the A-pillar?


Yup, it's bolted to the fender and the A pillar.
15 PW Laramie w/ Ramboxes, 35" Toyo AT's, Custom High Clearance Bumper, WKOR Sliders, Purple Cranium Diff Covers, K&N, Magnaflow, AEV Intake
[Build Thread] [Instagram]
User avatar
MikeKey
500_Posts
 
Posts: 778
Joined: Fri Mar 25, 2016 9:23 am
Location: Boise, Idaho

Re: BoldAdventures 2015 Power Wagon Build

Postby rkgzx9leftcoast » Mon Apr 17, 2017 9:36 am

Quick question... havnt seen any pics of this part, .... is there anything between the AEV intake and the air box connecting them ? or does it just force air behind the fender where the box draws in?
2016 Tradesman White ,adding mods now, 37 Ridge Grapplers on, Thuren Front end level kit on the way.
rkgzx9leftcoast
50_Posts
 
Posts: 134
Joined: Mon Oct 10, 2016 9:38 am
Location: Mesa Arizona

Re: BoldAdventures 2015 Power Wagon Build

Postby MikeKey » Mon Apr 17, 2017 9:43 am

rkgzx9leftcoast wrote:Quick question... havnt seen any pics of this part, .... is there anything between the AEV intake and the air box connecting them ? or does it just force air behind the fender where the box draws in?


It connects directly to the airbox. After removing the fender, I pretty much stopped taking photos since it was getting tedious. It goes into the fender, with a connection tube. And then another part that you rivet directly onto the Airbox. In theory that Air goes directly into your intake.
Attachments
2017-04-14 17.19.42.jpg
15 PW Laramie w/ Ramboxes, 35" Toyo AT's, Custom High Clearance Bumper, WKOR Sliders, Purple Cranium Diff Covers, K&N, Magnaflow, AEV Intake
[Build Thread] [Instagram]
User avatar
MikeKey
500_Posts
 
Posts: 778
Joined: Fri Mar 25, 2016 9:23 am
Location: Boise, Idaho

Re: BoldAdventures 2015 Power Wagon Build

Postby nhfd21348 » Mon Apr 17, 2017 4:09 pm

Mike,
Any word or updates on that kinzer front bumper? AEV snorkel looks bad a$$, I don't think I have the balls to make a hole like that in the fender.
2016 Power Wagon Laramie, Maximum Steel. Mods installed are White Knuckle Steps and factory rubber mud flaps and Blue LED response lights.
nhfd21348
 
Posts: 38
Joined: Fri Apr 08, 2016 11:41 am
Location: Hudson Valley, NY

Re: BoldAdventures 2015 Power Wagon Build

Postby MikeKey » Mon Apr 17, 2017 5:35 pm

nhfd21348 wrote:Mike,
Any word or updates on that kinzer front bumper? AEV snorkel looks bad a$$, I don't think I have the balls to make a hole like that in the fender.


Still waiting for it to arrive. Just shipped out today. :popcorn:

How it looks and how I feel will determine whether or not it's on the truck for Moab or sitting in the garage. That's all I have to comment about it right now. Waiting to see it. :popcorn:
15 PW Laramie w/ Ramboxes, 35" Toyo AT's, Custom High Clearance Bumper, WKOR Sliders, Purple Cranium Diff Covers, K&N, Magnaflow, AEV Intake
[Build Thread] [Instagram]
User avatar
MikeKey
500_Posts
 
Posts: 778
Joined: Fri Mar 25, 2016 9:23 am
Location: Boise, Idaho

Re: BoldAdventures 2015 Power Wagon Build

Postby rkgzx9leftcoast » Tue Apr 18, 2017 9:11 am

Thanks for the info !! Intake looks awesome on your truck!!
2016 Tradesman White ,adding mods now, 37 Ridge Grapplers on, Thuren Front end level kit on the way.
rkgzx9leftcoast
50_Posts
 
Posts: 134
Joined: Mon Oct 10, 2016 9:38 am
Location: Mesa Arizona

PreviousNext

Return to Member Builds

Who is online

Users browsing this forum: Bing [Bot] and 1 guest