Reloaderguy's Build Thread - Content Removed

Start your thread and show everyone your build out.
User avatar
Reloaderguy
2000_Posts
2000_Posts
Posts: 2052
Joined: Tue Feb 09, 2016 8:06 am
Model Year: 2016
Location: Central Oregon

Re: Reloaderguy's Build Thread - 2016 Laramie Power Wagon

Post by Reloaderguy » Sun Nov 04, 2018 10:49 am

removed
Last edited by Reloaderguy on Thu Nov 22, 2018 1:02 pm, edited 1 time in total.
Best Year Power Wagon

User avatar
Reloaderguy
2000_Posts
2000_Posts
Posts: 2052
Joined: Tue Feb 09, 2016 8:06 am
Model Year: 2016
Location: Central Oregon

Re: Reloaderguy's Build Thread - 2016 Laramie Power Wagon

Post by Reloaderguy » Fri Nov 16, 2018 7:32 pm

removed
Last edited by Reloaderguy on Thu Nov 22, 2018 1:03 pm, edited 1 time in total.
Best Year Power Wagon

User avatar
Bill2014
1000_Posts
1000_Posts
Posts: 1014
Joined: Fri May 09, 2014 9:03 pm
Model Year: 2014
Location: Northern NY

Re: Reloaderguy's Build Thread - 2016 Laramie Power Wagon

Post by Bill2014 » Fri Nov 16, 2018 8:11 pm

Those tires make your truck look small. :rockon:
2014 Power Wagon Laramie
Titan V5 2.5" Receiver Pintle Hook
Warn wireless winch controller
.188" DOM White Knuckle Rock Sliders
Locker Bypass & Nanny Kill Switch

Moab 2006

RustyPW
2000_Posts
2000_Posts
Posts: 4240
Joined: Thu May 24, 2012 4:23 pm
Model Year: 2008
Location: Brownsville Pa.

Re: Reloaderguy's Build Thread - 2016 Laramie Power Wagon

Post by RustyPW » Fri Nov 16, 2018 8:54 pm

NICE! :rockon:

Reminds me of a hotwheels truck. :lol:
PWOC #53
2008 POWER WAGON RC
Mods to the PW; Nerffed Mopar RockRails, Wheel Well Liners, Bushwacker Pocket Fender Flairs, Garvmin dezl 560LMT GPS, Power Wagon Winch Kit, Line X Ultra Bed Liner, PIAA Headlight Bulbs, PIAA 580 Driving Lights (135 watt), PIAA 520 Fog Lights (135 watt), PIAA 520 ATP Off-Road Lights (135 watt), Locker Bypass, Modifed Rockcrusher Diff Covers, Mopar Utility Bed Rails and Tool Box, Warn Winch Wireless Remote Control, "el-cheapo" Inclinometer, Airaid CAI, Winch TPS Bypass, 35" Toyo's, Mopar Spare Tire Lock, 'T' Steering Linkage, Modifed PSC Steering Brace, P3 Brake Controller, Modifed Fusion "mall crawler" rear bumper , PIAA 1500 Back-Up Lights, 1Ton HEMI Tranny Cooler, Leer 100XR Bed Cap, Factory Tow Mirrors, CenterLine Rims 17x9-5.25 BS, Mag-Hytec Tranny Pan, AutoMeter Gauges, PSC Extreme Hydro Assist Steering, Carli G2 Track Bar, Carli Ball-Joints, Dynatrac FreeSpin Hubs, Snorkel, RCV Axles, EBC Pads & Rotors, Aluminess Front Bumper, 14,000 lb Pul-Pal, 60" Extreme Hi-lift Jack, and more riggin' equipment, Carli Long Travel Air Bags, Bilstein 7100 Shocks - Carli Valving, Carli Control Arms, Thuren 3" SoftRide Springs, Thuren Rear Shackles, MagnaFlow Muffler, Crown Stainless Brake Lines, MORE STUFF COMIN'.

Moab '10, '12, '14.
Rausch Creek Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18,
Russ NRA Benefactor Member

User avatar
Reloaderguy
2000_Posts
2000_Posts
Posts: 2052
Joined: Tue Feb 09, 2016 8:06 am
Model Year: 2016
Location: Central Oregon

Re: Reloaderguy's Build Thread - 2016 Laramie Power Wagon

Post by Reloaderguy » Fri Nov 16, 2018 10:11 pm

RustyPW wrote:
Fri Nov 16, 2018 8:54 pm
NICE! :rockon:

Reminds me of a hotwheels truck. :lol:
The pictures don't do it any justice. The wheel and tire combo makes the truck 6" wider than the 37's I was running. I'm going to weigh a wheel and tire tomorrow but I'm guessing they're 130lbs each. The 37's were under 100lbs each. So far I'm running 27/22 PSI and it feels good, 30 PSI was rock hard. I haven't balanced the tires but I'm not sure it's needed, they're pretty smooth. I put new TPMS sensors in the wheels and truck picked them up seamlessly.
Best Year Power Wagon

RustyPW
2000_Posts
2000_Posts
Posts: 4240
Joined: Thu May 24, 2012 4:23 pm
Model Year: 2008
Location: Brownsville Pa.

Re: Reloaderguy's Build Thread - 2016 Laramie Power Wagon

Post by RustyPW » Fri Nov 16, 2018 10:22 pm

What's the spec's on the rims?

I haven't run TPMS's in my tires for years. My light stays on. :lol:
PWOC #53
2008 POWER WAGON RC
Mods to the PW; Nerffed Mopar RockRails, Wheel Well Liners, Bushwacker Pocket Fender Flairs, Garvmin dezl 560LMT GPS, Power Wagon Winch Kit, Line X Ultra Bed Liner, PIAA Headlight Bulbs, PIAA 580 Driving Lights (135 watt), PIAA 520 Fog Lights (135 watt), PIAA 520 ATP Off-Road Lights (135 watt), Locker Bypass, Modifed Rockcrusher Diff Covers, Mopar Utility Bed Rails and Tool Box, Warn Winch Wireless Remote Control, "el-cheapo" Inclinometer, Airaid CAI, Winch TPS Bypass, 35" Toyo's, Mopar Spare Tire Lock, 'T' Steering Linkage, Modifed PSC Steering Brace, P3 Brake Controller, Modifed Fusion "mall crawler" rear bumper , PIAA 1500 Back-Up Lights, 1Ton HEMI Tranny Cooler, Leer 100XR Bed Cap, Factory Tow Mirrors, CenterLine Rims 17x9-5.25 BS, Mag-Hytec Tranny Pan, AutoMeter Gauges, PSC Extreme Hydro Assist Steering, Carli G2 Track Bar, Carli Ball-Joints, Dynatrac FreeSpin Hubs, Snorkel, RCV Axles, EBC Pads & Rotors, Aluminess Front Bumper, 14,000 lb Pul-Pal, 60" Extreme Hi-lift Jack, and more riggin' equipment, Carli Long Travel Air Bags, Bilstein 7100 Shocks - Carli Valving, Carli Control Arms, Thuren 3" SoftRide Springs, Thuren Rear Shackles, MagnaFlow Muffler, Crown Stainless Brake Lines, MORE STUFF COMIN'.

Moab '10, '12, '14.
Rausch Creek Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18,
Russ NRA Benefactor Member

User avatar
Reloaderguy
2000_Posts
2000_Posts
Posts: 2052
Joined: Tue Feb 09, 2016 8:06 am
Model Year: 2016
Location: Central Oregon

Re: Reloaderguy's Build Thread - 2016 Laramie Power Wagon

Post by Reloaderguy » Fri Nov 16, 2018 10:26 pm

removed
Last edited by Reloaderguy on Thu Nov 22, 2018 1:04 pm, edited 1 time in total.
Best Year Power Wagon

User avatar
Retired BLM Rig
500_Posts
500_Posts
Posts: 647
Joined: Sun Jan 31, 2016 6:51 pm
Model Year: 2008
Location: San Clemente, Ca.

Re: Reloaderguy's Build Thread - 2016 Laramie Power Wagon

Post by Retired BLM Rig » Fri Nov 16, 2018 11:31 pm

I've always loved the bulldog stance of minimal lift and big tires. :drool:
Looking forward to the flex test pics. :rockon:

User avatar
olyelr
2000_Posts
2000_Posts
Posts: 3253
Joined: Sun Dec 07, 2014 9:00 pm
Model Year: 2016
Location: Kewadin, MI

Re: Reloaderguy's Build Thread - 2016 Laramie Power Wagon

Post by olyelr » Fri Nov 16, 2018 11:38 pm

Looks like shit. I vote put it back to stock.
2016 Ram Power Wagon Laramie - Granite Crystal Metallic - Ramboxes - 35” AT3W - TazerRAM

:patriot:

User avatar
DamageWagon
Vendor
Vendor
Posts: 2025
Joined: Tue Oct 11, 2016 1:21 am
Model Year: 2011

Re: Reloaderguy's Build Thread - 2016 Laramie Power Wagon

Post by DamageWagon » Fri Nov 16, 2018 11:53 pm

It needs a giant American flag in the hitch

TankerZak
500_Posts
500_Posts
Posts: 571
Joined: Sun Nov 13, 2016 1:43 pm
Model Year: 2016

Re: Reloaderguy's Build Thread - 2016 Laramie Power Wagon

Post by TankerZak » Sat Nov 17, 2018 8:36 am

Yer killin me. Can you put the rest of the bumper together and take pics already!

Sent from my SM-G955U using Tapatalk

2016 Granite Crystal Metallic Power Wagon Laramie, no graphics, debadged, Thuren front and rear coils, Traxada rear 1 inch spacer, Thuren rear swaybar links, Thuren rear trackbar, King 3.0 (Stage 4) front shocks, King 2.5 (Stage 3) rear shocks, Boogie front bump stops, Toyo RT 37x12.5R17 on Raceline Avenger 17x9 +20 wheels, DOR steering brace, Thuren King Steering Damper, White Knuckle rock sliders, Dethloff skid plate, Purple Cranium Half Spider front and rear diff guards, Airlift Ultimate airbags with Daystar cradles, Bakflip Revolver X2 tonneau, AMP BedStep, Factor55 Ultrahook with 100ft 7/16 synthetic winch line, Zroadz Grill with slim 20 inch light bar, DDM Tuning LEDs/HIDs, Magnaflow 19200 modified with upgraded resonator and after axle dump, tinted front windows 35%.

User avatar
Reloaderguy
2000_Posts
2000_Posts
Posts: 2052
Joined: Tue Feb 09, 2016 8:06 am
Model Year: 2016
Location: Central Oregon

Re: Reloaderguy's Build Thread - 2016 Laramie Power Wagon

Post by Reloaderguy » Sat Nov 17, 2018 10:21 am

TankerZak wrote:
Sat Nov 17, 2018 8:36 am
Yer killin me. Can you put the rest of the bumper together and take pics already!

Sent from my SM-G955U using Tapatalk
I don't have the rest of the bumper yet. The standard outers don't work with 40's.
Best Year Power Wagon

TankerZak
500_Posts
500_Posts
Posts: 571
Joined: Sun Nov 13, 2016 1:43 pm
Model Year: 2016

Re: Reloaderguy's Build Thread - 2016 Laramie Power Wagon

Post by TankerZak » Sat Nov 17, 2018 10:30 am

You have a plan? Or is Don making you custom wings?

Sent from my SM-G955U using Tapatalk

2016 Granite Crystal Metallic Power Wagon Laramie, no graphics, debadged, Thuren front and rear coils, Traxada rear 1 inch spacer, Thuren rear swaybar links, Thuren rear trackbar, King 3.0 (Stage 4) front shocks, King 2.5 (Stage 3) rear shocks, Boogie front bump stops, Toyo RT 37x12.5R17 on Raceline Avenger 17x9 +20 wheels, DOR steering brace, Thuren King Steering Damper, White Knuckle rock sliders, Dethloff skid plate, Purple Cranium Half Spider front and rear diff guards, Airlift Ultimate airbags with Daystar cradles, Bakflip Revolver X2 tonneau, AMP BedStep, Factor55 Ultrahook with 100ft 7/16 synthetic winch line, Zroadz Grill with slim 20 inch light bar, DDM Tuning LEDs/HIDs, Magnaflow 19200 modified with upgraded resonator and after axle dump, tinted front windows 35%.

User avatar
Reloaderguy
2000_Posts
2000_Posts
Posts: 2052
Joined: Tue Feb 09, 2016 8:06 am
Model Year: 2016
Location: Central Oregon

Re: Reloaderguy's Build Thread - 2016 Laramie Power Wagon

Post by Reloaderguy » Sat Nov 17, 2018 10:57 am

TankerZak wrote:
Sat Nov 17, 2018 10:30 am
You have a plan? Or is Don making you custom wings?

Sent from my SM-G955U using Tapatalk
Don is making outers for 40's.
Best Year Power Wagon

User avatar
Reloaderguy
2000_Posts
2000_Posts
Posts: 2052
Joined: Tue Feb 09, 2016 8:06 am
Model Year: 2016
Location: Central Oregon

Re: Reloaderguy's Build Thread - 2016 Laramie Power Wagon

Post by Reloaderguy » Sat Nov 17, 2018 5:19 pm

Reloaderguy wrote:
Fri Nov 16, 2018 10:11 pm
RustyPW wrote:
Fri Nov 16, 2018 8:54 pm
NICE! :rockon:

Reminds me of a hotwheels truck. :lol:
The pictures don't do it any justice. The wheel and tire combo makes the truck 6" wider than the 37's I was running. I'm going to weigh a wheel and tire tomorrow but I'm guessing they're 130lbs each. The 37's were under 100lbs each. So far I'm running 27/22 PSI and it feels good, 30 PSI was rock hard. I haven't balanced the tires but I'm not sure it's needed, they're pretty smooth. I put new TPMS sensors in the wheels and truck picked them up seamlessly.
Correction, the 40's and TR Beadlocks are 142lbs each.
Best Year Power Wagon

User avatar
olyelr
2000_Posts
2000_Posts
Posts: 3253
Joined: Sun Dec 07, 2014 9:00 pm
Model Year: 2016
Location: Kewadin, MI

Re: Reloaderguy's Build Thread - 2016 Laramie Power Wagon

Post by olyelr » Sat Nov 17, 2018 5:49 pm

:o

Bet your glad you did 5.13’s!
2016 Ram Power Wagon Laramie - Granite Crystal Metallic - Ramboxes - 35” AT3W - TazerRAM

:patriot:

16PW
Posts: 31
Joined: Wed Sep 26, 2018 3:12 pm
Model Year: 2016

Re: Reloaderguy's Build Thread - 2016 Laramie Power Wagon

Post by 16PW » Mon Nov 19, 2018 3:23 pm

Looks badass! Looking forward to seeing it with the front bumper completed.

User avatar
Reloaderguy
2000_Posts
2000_Posts
Posts: 2052
Joined: Tue Feb 09, 2016 8:06 am
Model Year: 2016
Location: Central Oregon

Re: Reloaderguy's Build Thread - 2016 Laramie Power Wagon

Post by Reloaderguy » Mon Nov 19, 2018 9:31 pm

removed
Last edited by Reloaderguy on Thu Nov 22, 2018 1:05 pm, edited 1 time in total.
Best Year Power Wagon

TankerZak
500_Posts
500_Posts
Posts: 571
Joined: Sun Nov 13, 2016 1:43 pm
Model Year: 2016

Re: Reloaderguy's Build Thread - 2016 Laramie Power Wagon

Post by TankerZak » Mon Nov 19, 2018 9:57 pm

Reloaderguy wrote:The factory bundles the front parking sensors (if you have them) with the foglights in the bumper harness. I removed the sensors and converted the truck to rear parking sensors only so there is no longer a need to keep the sensor harness intact. For some reason the connectors in the bumper are potted so I couldn't get them apart. I ended up disassembling the harness and removing the parking sensor wiring. They are separate but in the same harness. I then reassembled the fog light harness using braided harness sleeve and heat shrink. I'll probably redo the harness when the bumper is finished but it works in the meantime. I'm just reusing the temporary Chinesium lights I had in the OEM bumper. Here is what the inside of the harness looks like:

Image
Can you add some details on how you disabled the front sensors?

Sent from my SM-G955U using Tapatalk

2016 Granite Crystal Metallic Power Wagon Laramie, no graphics, debadged, Thuren front and rear coils, Traxada rear 1 inch spacer, Thuren rear swaybar links, Thuren rear trackbar, King 3.0 (Stage 4) front shocks, King 2.5 (Stage 3) rear shocks, Boogie front bump stops, Toyo RT 37x12.5R17 on Raceline Avenger 17x9 +20 wheels, DOR steering brace, Thuren King Steering Damper, White Knuckle rock sliders, Dethloff skid plate, Purple Cranium Half Spider front and rear diff guards, Airlift Ultimate airbags with Daystar cradles, Bakflip Revolver X2 tonneau, AMP BedStep, Factor55 Ultrahook with 100ft 7/16 synthetic winch line, Zroadz Grill with slim 20 inch light bar, DDM Tuning LEDs/HIDs, Magnaflow 19200 modified with upgraded resonator and after axle dump, tinted front windows 35%.

User avatar
Reloaderguy
2000_Posts
2000_Posts
Posts: 2052
Joined: Tue Feb 09, 2016 8:06 am
Model Year: 2016
Location: Central Oregon

Re: Reloaderguy's Build Thread - 2016 Laramie Power Wagon

Post by Reloaderguy » Mon Nov 19, 2018 11:00 pm

AEV references it in their bumper installation instructions. You need to purchase the rear-only parking sensor module and replace yours. The module is at the base of the A-pillar under the door sill guard by the parking brake release. The module is found in almost every Dodge, Jeep, and Ram vehicle with rear parking sensors for the last six or eight years. They're like $100 new, I found one on Ebay for $40 used. The part # is 68204477AD.
Best Year Power Wagon

TankerZak
500_Posts
500_Posts
Posts: 571
Joined: Sun Nov 13, 2016 1:43 pm
Model Year: 2016

Re: Reloaderguy's Build Thread - 2016 Laramie Power Wagon

Post by TankerZak » Tue Nov 20, 2018 7:56 am

Reloaderguy wrote:AEV references it in their bumper installation instructions. You need to purchase the rear-only parking sensor module and replace yours. The module is at the base of the A-pillar under the door sill guard by the parking brake release. The module is found in almost every Dodge, Jeep, and Ram vehicle with rear parking sensors for the last six or eight years. They're like $100 new, I found one on Ebay for $40 used. The part # is 68204477AD.
and replacing that module disables it in the computer and the switch, etc?

Sent from my SM-G955U using Tapatalk

2016 Granite Crystal Metallic Power Wagon Laramie, no graphics, debadged, Thuren front and rear coils, Traxada rear 1 inch spacer, Thuren rear swaybar links, Thuren rear trackbar, King 3.0 (Stage 4) front shocks, King 2.5 (Stage 3) rear shocks, Boogie front bump stops, Toyo RT 37x12.5R17 on Raceline Avenger 17x9 +20 wheels, DOR steering brace, Thuren King Steering Damper, White Knuckle rock sliders, Dethloff skid plate, Purple Cranium Half Spider front and rear diff guards, Airlift Ultimate airbags with Daystar cradles, Bakflip Revolver X2 tonneau, AMP BedStep, Factor55 Ultrahook with 100ft 7/16 synthetic winch line, Zroadz Grill with slim 20 inch light bar, DDM Tuning LEDs/HIDs, Magnaflow 19200 modified with upgraded resonator and after axle dump, tinted front windows 35%.

2wagons1driveway
2000_Posts
2000_Posts
Posts: 2966
Joined: Wed Jan 16, 2013 6:55 pm
Location: ontario canada

Re: Reloaderguy's Build Thread - 2016 Laramie Power Wagon

Post by 2wagons1driveway » Tue Nov 20, 2018 8:46 am

Oh man, very very very nice!!!! Those 40’s look right at home


Sent from my iPhone using Tapatalk
if guns kill people
pencils mispell words
cars make people drive drunk
and spoons made rosie o'donnel fat

"The one thing you realize when you aquire your trade standard is you realistically don't know Anything"

User avatar
Reloaderguy
2000_Posts
2000_Posts
Posts: 2052
Joined: Tue Feb 09, 2016 8:06 am
Model Year: 2016
Location: Central Oregon

Re: Reloaderguy's Build Thread - 2016 Laramie Power Wagon

Post by Reloaderguy » Tue Nov 20, 2018 9:36 am

TankerZak wrote:
Tue Nov 20, 2018 7:56 am
Reloaderguy wrote:AEV references it in their bumper installation instructions. You need to purchase the rear-only parking sensor module and replace yours. The module is at the base of the A-pillar under the door sill guard by the parking brake release. The module is found in almost every Dodge, Jeep, and Ram vehicle with rear parking sensors for the last six or eight years. They're like $100 new, I found one on Ebay for $40 used. The part # is 68204477AD.
and replacing that module disables it in the computer and the switch, etc?

Sent from my SM-G955U using Tapatalk
Yes, you will no longer have front sensors and the button will not work. No codes.
Best Year Power Wagon

TankerZak
500_Posts
500_Posts
Posts: 571
Joined: Sun Nov 13, 2016 1:43 pm
Model Year: 2016

Re: Reloaderguy's Build Thread - 2016 Laramie Power Wagon

Post by TankerZak » Tue Nov 20, 2018 9:38 am

Reloaderguy wrote:
TankerZak wrote:
Tue Nov 20, 2018 7:56 am
Reloaderguy wrote:AEV references it in their bumper installation instructions. You need to purchase the rear-only parking sensor module and replace yours. The module is at the base of the A-pillar under the door sill guard by the parking brake release. The module is found in almost every Dodge, Jeep, and Ram vehicle with rear parking sensors for the last six or eight years. They're like $100 new, I found one on Ebay for $40 used. The part # is 68204477AD.
and replacing that module disables it in the computer and the switch, etc?

Sent from my SM-G955U using Tapatalk
Yes, you will no longer have front sensors and the button will not work. No codes.
Thanks, nice!

Sent from my SM-G955U using Tapatalk

2016 Granite Crystal Metallic Power Wagon Laramie, no graphics, debadged, Thuren front and rear coils, Traxada rear 1 inch spacer, Thuren rear swaybar links, Thuren rear trackbar, King 3.0 (Stage 4) front shocks, King 2.5 (Stage 3) rear shocks, Boogie front bump stops, Toyo RT 37x12.5R17 on Raceline Avenger 17x9 +20 wheels, DOR steering brace, Thuren King Steering Damper, White Knuckle rock sliders, Dethloff skid plate, Purple Cranium Half Spider front and rear diff guards, Airlift Ultimate airbags with Daystar cradles, Bakflip Revolver X2 tonneau, AMP BedStep, Factor55 Ultrahook with 100ft 7/16 synthetic winch line, Zroadz Grill with slim 20 inch light bar, DDM Tuning LEDs/HIDs, Magnaflow 19200 modified with upgraded resonator and after axle dump, tinted front windows 35%.

Colibri
1000_Posts
1000_Posts
Posts: 1609
Joined: Mon Jun 08, 2015 5:44 pm
Model Year: 2009

Re: Reloaderguy's Build Thread - 2016 Laramie Power Wagon

Post by Colibri » Tue Nov 20, 2018 7:02 pm

Looking fantastic with the man tires! You notice much difference in drivability from the 37’s?
Central Texas and Houston area
2009 5.7 auto quadcab
Carli 3” coils deaver leafs 3” kings with 4 tube bypass rear and fr/rr hydro bumps
Howe steering pump and gear with hydraulic ram assist
Custom tube bumpers and white knuckle sliders
Creative fab trussed axle. rem polished and cryoed 5.13 gears with arb lockers fr/rr
Sharadon stage 2 545rfe with 3000 stall edge converter
Lots of other stuff lol

Post Reply