Board index General Member Builds

Start your thread and show everyone your build out.

Re:

Postby bstefanic » Tue Jun 28, 2016 5:42 am

Lee buddy, those wheels are friggin bitchin
Hella's behind the grill, locker bypass, BDS Long Arm Kit, Carli Front Diff Cover, Rockcrusher Rear, 37" Interco M16's, ATX Cornice Wheels, DT Pro Fab steering box brace, EBC brake pads, Dynatrac Ball Joints, SY Eliminated Transfer Case, Custom Tom Wood's Rear DS, Kings Arsenal Seat Covers, Dynatrac Free Spin Hubs with Dynalocs
User avatar
bstefanic
500_Posts
 
Posts: 811
Joined: Tue May 29, 2012 11:42 am
Location: Chesapeake, VA

Re:

Postby bstefanic » Tue Jun 28, 2016 6:04 am

Hey man, next time you're poking around under your truck....so I'm assuming today, ya mind measuring the vertical distance between the bottom of your rear bumps and the top of the axle tube? I'm sitting here overseas putting together a list of parts to order and I'm starting to think that I'm going to run into issues with my rear DS binding due to the spline length with any significant axle compression. If I can find my original order spec sheet should be able to figure out how much the shaft will shorten with the axle compressed based off of your measurements. Really hoping I don't have to send it back to Tom Wood or find a local shop to modify it. Thanks man
Hella's behind the grill, locker bypass, BDS Long Arm Kit, Carli Front Diff Cover, Rockcrusher Rear, 37" Interco M16's, ATX Cornice Wheels, DT Pro Fab steering box brace, EBC brake pads, Dynatrac Ball Joints, SY Eliminated Transfer Case, Custom Tom Wood's Rear DS, Kings Arsenal Seat Covers, Dynatrac Free Spin Hubs with Dynalocs
User avatar
bstefanic
500_Posts
 
Posts: 811
Joined: Tue May 29, 2012 11:42 am
Location: Chesapeake, VA

Re: "Saggin wagon" short and sweet.

Postby 2wagons1driveway » Tue Jun 28, 2016 6:34 am

bstefanic wrote:Hey man, next time you're poking around under your truck....so I'm assuming today, ya mind measuring the vertical distance between the bottom of your rear bumps and the top of the axle tube? I'm sitting here overseas putting together a list of parts to order and I'm starting to think that I'm going to run into issues with my rear DS binding due to the spline length with any significant axle compression. If I can find my original order spec sheet should be able to figure out how much the shaft will shorten with the axle compressed based off of your measurements. Really hoping I don't have to send it back to Tom Wood or find a local shop to modify it. Thanks man
how much spline shaft you got showing brotha? Remember you have to think of leafs like trailing arms so when the rear suspension actually compresses it pulls the driveshaft out of the slip yoke and when it droops out it pushes it further in! I can measure if you want when I get a chance!


Sent from Canada
if guns kill people
pencils mispell words
cars make people drive drunk
and spoons made rosie o'donnel fat

"The one thing you realize when you aquire your trade standard is you realistically don't know Anything"
2wagons1driveway
2000_Posts
 
Posts: 2918
Joined: Wed Jan 16, 2013 5:55 pm
Location: ontario canada

Re:

Postby bstefanic » Tue Jun 28, 2016 6:47 am

2wagons1driveway wrote:
bstefanic wrote:Hey man, next time you're poking around under your truck....so I'm assuming today, ya mind measuring the vertical distance between the bottom of your rear bumps and the top of the axle tube? I'm sitting here overseas putting together a list of parts to order and I'm starting to think that I'm going to run into issues with my rear DS binding due to the spline length with any significant axle compression. If I can find my original order spec sheet should be able to figure out how much the shaft will shorten with the axle compressed based off of your measurements. Really hoping I don't have to send it back to Tom Wood or find a local shop to modify it. Thanks man
how much spline shaft you got showing brotha? Remember you have to think of leafs like trailing arms so when the rear suspension actually compresses it pulls the driveshaft out of the slip yoke and when it droops out it pushes it further in! I can measure if you want when I get a chance!


Sent from Canada


Hmm, actually never realized that. Not a whole lot unfortunately, only about 1.5" or so...didn't take that into account when taking measurements to order it. I may just have to cycle the suspension when I get back and see how it looks
Hella's behind the grill, locker bypass, BDS Long Arm Kit, Carli Front Diff Cover, Rockcrusher Rear, 37" Interco M16's, ATX Cornice Wheels, DT Pro Fab steering box brace, EBC brake pads, Dynatrac Ball Joints, SY Eliminated Transfer Case, Custom Tom Wood's Rear DS, Kings Arsenal Seat Covers, Dynatrac Free Spin Hubs with Dynalocs
User avatar
bstefanic
500_Posts
 
Posts: 811
Joined: Tue May 29, 2012 11:42 am
Location: Chesapeake, VA

Re:

Postby Reloaderguy » Tue Jun 28, 2016 7:49 am

Did you ever figure out the vibration?
Best Year Power Wagon
User avatar
Reloaderguy
1000_Posts
 
Posts: 1309
Joined: Tue Feb 09, 2016 7:06 am
Location: Oregon

Re: "Saggin wagon" short and sweet.

Postby 2wagons1driveway » Tue Jun 28, 2016 11:47 am

Reloaderguy wrote:Did you ever figure out the vibration?
we narrowed it down to a t case and weirdly enough my t case guy and diff guy has never seen that situation before and then after he looked at mine a few times he had another customer with a 12' cummins that had a vibe from his t case at around same speeds

Apperantly 12'z were bad for weird shit like that turbo diesel or gassers


Sent from Canada
if guns kill people
pencils mispell words
cars make people drive drunk
and spoons made rosie o'donnel fat

"The one thing you realize when you aquire your trade standard is you realistically don't know Anything"
2wagons1driveway
2000_Posts
 
Posts: 2918
Joined: Wed Jan 16, 2013 5:55 pm
Location: ontario canada

Re: "Saggin wagon" short and sweet.

Postby 2wagons1driveway » Tue Jun 28, 2016 6:32 pm

Can't wait to get my hands on them
ImageUploadedByTapatalk1467160302.483418.jpg
18" stroke 3.0 four tube bypasses from Thuren fab/ king shocks


Sent from Canada
if guns kill people
pencils mispell words
cars make people drive drunk
and spoons made rosie o'donnel fat

"The one thing you realize when you aquire your trade standard is you realistically don't know Anything"
2wagons1driveway
2000_Posts
 
Posts: 2918
Joined: Wed Jan 16, 2013 5:55 pm
Location: ontario canada

Re: "Saggin wagon" short and sweet.

Postby 2wagons1driveway » Sun Jul 03, 2016 12:00 pm

ImageUploadedByTapatalk1467568781.443337.jpg
good times this weekend this truck still blows me away... Lots of hard work and pissed off moments with it but when it works it works so well... Great gtg with the other power wagons from around Edmonton area we were missing a few because of other circumstances but great little run. Scared a can am renegade 1000 after he passed me in the spillway when I was leading the group and I decided to just play keep up for five minutes... Needless to say the whites off his eyes were quite huge when he turned around and saw this 8000lb truck still right behind him after him doing 80kmh down a rutted out trail for two minutes lol we stopped and talked afterwards and he's like how did that thing even keep up I thought I was going pretty quick? I was just like "ya ...you were"
ImageUploadedByTapatalk1467568773.131259.jpg
ImageUploadedByTapatalk1467568765.028110.jpg
ImageUploadedByTapatalk1467568598.529232.jpg



Sent from Canada
if guns kill people
pencils mispell words
cars make people drive drunk
and spoons made rosie o'donnel fat

"The one thing you realize when you aquire your trade standard is you realistically don't know Anything"
2wagons1driveway
2000_Posts
 
Posts: 2918
Joined: Wed Jan 16, 2013 5:55 pm
Location: ontario canada

Re: "Saggin wagon" short and sweet.

Postby 2wagons1driveway » Tue Jul 19, 2016 6:11 pm

Image haha these aren't short at all


Sent from Canada
if guns kill people
pencils mispell words
cars make people drive drunk
and spoons made rosie o'donnel fat

"The one thing you realize when you aquire your trade standard is you realistically don't know Anything"
2wagons1driveway
2000_Posts
 
Posts: 2918
Joined: Wed Jan 16, 2013 5:55 pm
Location: ontario canada

Re:

Postby nts007 » Tue Jul 19, 2016 8:01 pm

Holy hell lee....
08 ctd--mini max--thuren 3" coils and shackles--4.56 gears and lockers in pw axles--some lights--afe intake system--bd super b turbo--Banks w/m Injection--Dynatrac Balljoints--bilstein 7100s--37" Nitto trail grapplers--DOR Long arms--Custom emf track bar--Manual T-case swap--Full PW Under armor--PSC Hydro Assist
User avatar
nts007
2000_Posts
 
Posts: 2115
Joined: Wed Dec 11, 2013 9:01 pm
Location: Sask, Canada, Earth

Re:

Postby Reloaderguy » Tue Jul 19, 2016 8:05 pm

I thought you were taller. How do you get in your truck?
Best Year Power Wagon
User avatar
Reloaderguy
1000_Posts
 
Posts: 1309
Joined: Tue Feb 09, 2016 7:06 am
Location: Oregon

Re:

Postby NovA ProspekT » Thu Jul 21, 2016 8:01 am

Good God man... :shock:

You building a Trophy Truck? You're halfway there already. :lol:

I wish I could justify those where I live.
-------- 2007 Dodge Power Wagon | Vengeance --------
- Cooper S/T MAXX 37x12.5R17 | Carli Ball Joints
- Uniden Bearcat 980SSB CB Radio | 4-ft. Firestik Red, White & Blue CB antenna | PA Speaker
- Factory REC Radio W/ PAC iSimple Aux. Input Interface
- BackRack Original Rack | BackRack Siderails | Truxedo Lo Pro QT Tonneau Cover | Pop N Lock Tailgate Lock
- White Knuckle Offroad Rock Sliders | Aluminess Front Bumper | Carli Front Diff. Guard
- Spintech Super Pro Street 9000 Muffler | QTP E-Cutout
- Bosch Compact 100 Fog Lights | J.W. Speaker TS4000 LED Driving Lights
- Grote 30" Off-Road LED Light Bar | Grote BriteZone Slim Rear Work Lights
- ARB CKMTA12 Twin air-compressor w/2.5gal. tank

My build - My Flickr
Freedom is the miles I'm rolling on...
User avatar
NovA ProspekT
50_Posts
 
Posts: 98
Joined: Tue Jan 05, 2016 10:53 am
Location: New Hampshire - Live Free or Die

Re:

Postby Will » Thu Jul 21, 2016 8:44 am

me likey but your frame might not likey :sick:
2010 with 37" hooves, controlled by numerous Thuren parts and Thuren Custom King 2.5's
viewtopic.php?f=13&t=2333

I only do what the majority of the 4 voices in my head tell me to. In most cases, I ignore two of them because one doesn't speak English, and I suspect the other is talking to someone else.
User avatar
Will
2000_Posts
 
Posts: 2470
Joined: Mon Jan 27, 2014 6:16 am

Re: "Saggin wagon" short and sweet.

Postby 2wagons1driveway » Thu Jul 21, 2016 1:29 pm

Will wrote:me likey but your frame might not likey :sick:
haha no maybe not especially with new bed cage I think fish plating will happen soon! Image ImageImage they make great mantle pieces lol

I added a picture of the small service advisor holding them lol I'm 5'10 and he's just alittle over 4'7" I think lol

Also some nice custom lower leaf spring mounts Image


Sent from Canada
if guns kill people
pencils mispell words
cars make people drive drunk
and spoons made rosie o'donnel fat

"The one thing you realize when you aquire your trade standard is you realistically don't know Anything"
2wagons1driveway
2000_Posts
 
Posts: 2918
Joined: Wed Jan 16, 2013 5:55 pm
Location: ontario canada

Re: "Saggin wagon" short and sweet.

Postby 2wagons1driveway » Mon Aug 08, 2016 7:14 pm

Bed cage starts tomorrow


Sent from Canada
if guns kill people
pencils mispell words
cars make people drive drunk
and spoons made rosie o'donnel fat

"The one thing you realize when you aquire your trade standard is you realistically don't know Anything"
2wagons1driveway
2000_Posts
 
Posts: 2918
Joined: Wed Jan 16, 2013 5:55 pm
Location: ontario canada

Re:

Postby Colibri » Mon Aug 08, 2016 9:50 pm

Shit yeah! Canadian Godzilla is about to be unleashed :rockon:
Colibri
1000_Posts
 
Posts: 1200
Joined: Mon Jun 08, 2015 3:44 pm

Re:

Postby nts007 » Mon Aug 08, 2016 10:11 pm

Godzilla ain't got nuttin on lee's wagon
08 ctd--mini max--thuren 3" coils and shackles--4.56 gears and lockers in pw axles--some lights--afe intake system--bd super b turbo--Banks w/m Injection--Dynatrac Balljoints--bilstein 7100s--37" Nitto trail grapplers--DOR Long arms--Custom emf track bar--Manual T-case swap--Full PW Under armor--PSC Hydro Assist
User avatar
nts007
2000_Posts
 
Posts: 2115
Joined: Wed Dec 11, 2013 9:01 pm
Location: Sask, Canada, Earth

Re:

Postby azracer » Tue Aug 09, 2016 12:08 am

I think you got bitten by the bug. You now need a cage!
My build 2009 3G
http://forum.powerwagonregistry.org/viewtopic.php?f=13&t=2305

Beginners reading list:
1) Quigley’s Anglo-American Establishment – 354 pages http://www.carrollquigley.net/pdf/the_a ... shment.pdf
2) Wall Street and the Bolshevik Revolution by Antony C. Sutton 165 pages https://www.voltairenet.org/IMG/pdf/Sut ... tion-5.pdf
3) Wall Street & the Rise of Hitler by Antony C. Sutton 148 pages https://www.voltairenet.org/IMG/pdf/Sut ... Hitler.pdf
4) Wall Street and FDR by Antony C. Sutton 177 pages http://sandiego.indymedia.org/media/2007/02/125049.pdf
5) Dishonest Money by Joseph Plummer 175 pages http://joeplummer.com/dishonest-money.html
6) None Dare Call it Conspiracy by Gary Allen 197 pages http://www.outpost-of-freedom.com/libra ... y_1971.pdf
David Rockefeller: Memoirs (The story of traitors)
http://www.devvy.com/pdf/2006_November/ ... rnment.pdf
azracer
1000_Posts
 
Posts: 1368
Joined: Thu May 24, 2012 6:34 pm

FRANKEN-WAGEN

Postby adeluca73 » Tue Aug 09, 2016 7:21 am

At what point does this stop being a PW & start becoming a generic monster truck.... Aka FrankenWagen. :poke:
2014 Ram PW SLT: Two tone Flame Red & Black
Completed Mods: Ram door sill guards, Front air deflector, WeatherTech slimline window deflectors, DiamondBack HD cover coated w/ Line-X, Mufflex MagnaFlow muffler & Resonator delete, Opti-Coat Pro 2.0, DeeZee tailgate strut, DeeZee ¼" fitted bed mat, Factor-55: FlatLink winch hook/Shorty Strap 3.0/Hitchlink 2.5, Warn Wireless Winch Remote, Locker by-pass, AEM dry filter, Truxedo LED bed lights wired into RamBox Connector, WhiteKnuckle sliders w/ full-length diamond plate coated in Line-X, Purple Cranium rear diff guard, AEV front/rear diff cover, AEV RAI w/ pre-filter, AEV ProCal (Bootleg'd), DOR Steering Box Brace, Phillips Hi intensity LEDs in cargo lamps & back-ups, triple anti-hop shocks, Truxx PW specific front 1.5" level, AAM 4.88's, custom black-out work, Line-X front/rear bumpers & wheel flares, 37" Nitto Ridge Grapplers, Plasti-dip PW wheels Black w/ Gunmetal metalizer, FilterMag kit, AMP Research BedStep
Next Mods: Thuren: {Coils, Track Bar, Boggie Bumps, King 2.5's shocks} , on-board air, HID low CANBUS replacement, LED HI, BD LED fogs
User avatar
adeluca73
2000_Posts
 
Posts: 2020
Joined: Mon May 19, 2014 9:56 pm
Location: The Pentagon, VA

Re:

Postby Colibri » Tue Aug 09, 2016 8:32 am

Theseus' ship for the modern age :rofl:
Colibri
1000_Posts
 
Posts: 1200
Joined: Mon Jun 08, 2015 3:44 pm

Re:

Postby Will » Tue Aug 09, 2016 9:15 am

Cage time for sure!
2010 with 37" hooves, controlled by numerous Thuren parts and Thuren Custom King 2.5's
viewtopic.php?f=13&t=2333

I only do what the majority of the 4 voices in my head tell me to. In most cases, I ignore two of them because one doesn't speak English, and I suspect the other is talking to someone else.
User avatar
Will
2000_Posts
 
Posts: 2470
Joined: Mon Jan 27, 2014 6:16 am

Re: FRANKEN-WAGEN

Postby nts007 » Tue Aug 09, 2016 7:27 pm

adeluca73 wrote:At what point does this stop being a PW & start becoming a generic monster truck.... Aka FrankenWagen. :poke:


When he installs 42's
08 ctd--mini max--thuren 3" coils and shackles--4.56 gears and lockers in pw axles--some lights--afe intake system--bd super b turbo--Banks w/m Injection--Dynatrac Balljoints--bilstein 7100s--37" Nitto trail grapplers--DOR Long arms--Custom emf track bar--Manual T-case swap--Full PW Under armor--PSC Hydro Assist
User avatar
nts007
2000_Posts
 
Posts: 2115
Joined: Wed Dec 11, 2013 9:01 pm
Location: Sask, Canada, Earth

Re: "Saggin wagon" short and sweet.

Postby Stickman » Tue Aug 09, 2016 11:27 pm

Where's that meme that says "Just got a new daily!" over a picture of a stock car. Then in another picture below it where it's completely modded to hell and doesn't look anything close to stock it says "Damn, I need a daily" This is that, except with a truck.
Live To Ride, Ride To Live

2012 Ram Power Wagon - Check out my build thread to see my mods! viewtopic.php?f=13&t=2187
User avatar
Stickman
500_Posts
 
Posts: 833
Joined: Sun Nov 17, 2013 11:02 pm
Location: Wayland, MO

Re: "Saggin wagon" short and sweet.

Postby 2wagons1driveway » Mon Aug 22, 2016 10:47 pm

Hahahaha exactly. Can an admin change this title to frankenwagon? Hahaha

Some updates I didn't actually go with this cage design because they fucked up and put shocks in the wrong spot so now they are tilted inwards as well as forwards for tire clearance I think I still have to run wheel spacers to clear everything however the travel numbers look pretty sweet I'm thinking 19" at least.... This is 4500lbs in bed and still not at full bump so I will have to cycle myself and set the new bump zone up with boogies etc... I do get it back tomorrow but here's a few pictures to keep y'all entertained ImageImageImageImageImageImage


Sent from Canada
if guns kill people
pencils mispell words
cars make people drive drunk
and spoons made rosie o'donnel fat

"The one thing you realize when you aquire your trade standard is you realistically don't know Anything"
2wagons1driveway
2000_Posts
 
Posts: 2918
Joined: Wed Jan 16, 2013 5:55 pm
Location: ontario canada

Re:

Postby Colibri » Tue Aug 23, 2016 1:00 pm

I've had trouble finding good help in the past, it's always frustrating to come back and find nothing has been done the way you wanted it to. I was surprised to not see any bent tube in that bedcage. Overall it's starting to really come together though lee, just hang in there and you'll be making raptors tuck tail and run in no time! :rockon:
Colibri
1000_Posts
 
Posts: 1200
Joined: Mon Jun 08, 2015 3:44 pm

PreviousNext

Return to Member Builds

Who is online

Users browsing this forum: No registered users and 4 guests


cron