Boogie wagon take 2
Re: Boogie wagon take 2
Cool, I'd love to see how you end up installing it. Roof real estate for me is at a premium with the cab marker lights up front Sirius antenna out back and the center mount ham.
Central Texas and Houston area
2009 5.7 auto quadcab
Carli 3” coils deaver leafs 3” kings with 4 tube bypass rear and fr/rr hydro bumps
Howe steering pump and gear with hydraulic ram assist
Custom tube bumpers and white knuckle sliders
Creative fab trussed axle. rem polished and cryoed 5.13 gears with arb lockers fr/rr
Sharadon stage 2 545rfe with 3000 stall edge converter
Lots of other stuff lol
2009 5.7 auto quadcab
Carli 3” coils deaver leafs 3” kings with 4 tube bypass rear and fr/rr hydro bumps
Howe steering pump and gear with hydraulic ram assist
Custom tube bumpers and white knuckle sliders
Creative fab trussed axle. rem polished and cryoed 5.13 gears with arb lockers fr/rr
Sharadon stage 2 545rfe with 3000 stall edge converter
Lots of other stuff lol
Re: Boogie wagon take 2
Okay! Started the first portion of the wiring today. Using MIL-W-22759/16 mil spec wire for everything, it's Tefzel insulated good to 300* and each individual copper strand is tin plated. It comes in any insulation color you want, as long as it's white lol. Therefore wire identification tags are a must. I'm using a BEE3+ heat shrink tubing thermal printer to label every wire then clear heat shrink over the tag. Instead of zip ties I'm using MIL-T-43435B lacing cord. Good to about the same temp as the wire and 50lb test. Every couple inches you tie a clove hitch followed by two half hitches to bundle the wires securely. Sheathing the bundles in Raychem DR-25 Heat shrink which is resistant to fuel, oil, and battery acid and good to 300* then sealing the ends of each bundle/harness with either a shrink boot and epoxy or adhesive lined heat shrink depending on location and connector style etc. Deutsch DTP and DT connectors for everything.
This first bundle is the power feed for the ham radio. Deutsch size 12 pins at the firewall connector to 10 gauge wire, all rated for 25 amps continuous. Down to a two position male DTP connector for the kenwood.
This first bundle is the power feed for the ham radio. Deutsch size 12 pins at the firewall connector to 10 gauge wire, all rated for 25 amps continuous. Down to a two position male DTP connector for the kenwood.
- Attachments
Central Texas and Houston area
2009 5.7 auto quadcab
Carli 3” coils deaver leafs 3” kings with 4 tube bypass rear and fr/rr hydro bumps
Howe steering pump and gear with hydraulic ram assist
Custom tube bumpers and white knuckle sliders
Creative fab trussed axle. rem polished and cryoed 5.13 gears with arb lockers fr/rr
Sharadon stage 2 545rfe with 3000 stall edge converter
Lots of other stuff lol
2009 5.7 auto quadcab
Carli 3” coils deaver leafs 3” kings with 4 tube bypass rear and fr/rr hydro bumps
Howe steering pump and gear with hydraulic ram assist
Custom tube bumpers and white knuckle sliders
Creative fab trussed axle. rem polished and cryoed 5.13 gears with arb lockers fr/rr
Sharadon stage 2 545rfe with 3000 stall edge converter
Lots of other stuff lol
- Pit Slave
- Vendor
- Posts: 1486
- Joined: Thu May 17, 2012 11:12 am
- Location: Sandy, Utah.. Moab, Jersey, Space Station, Baja.....
Re: Boogie wagon take 2
Very nice, I have piles of Tefzel, Kynar, TFE, PTFE, type of wire. Lots of it from aircraft, the rest of it laying around on spools! lol Have a drawer in my tool chest that cost an average of $100 a square inch in tools to do all the prep/crimping. I don't use standard wire strippers on the hi-rel assemblies, I have a heated no-nick wire stripper for that. Zero chance of a break from vibration. Wire assemblies/harnesses is one of my jobs. I plan on doing the entire truck one day, if I get the time that is, lol.
#crimpinainteasy
Sent from my XT1254 using Tapatalk
#crimpinainteasy
Sent from my XT1254 using Tapatalk
Nothing's more dead than a horse in a glue bottle.
There are two ways to conquer and enslave a nation.
One is by the sword. The other is by debt.
John Adams - 1826
I guess you could say I'm a bit off center.....
There are two ways to conquer and enslave a nation.
One is by the sword. The other is by debt.
John Adams - 1826
I guess you could say I'm a bit off center.....
Re: Boogie wagon take 2
You're a damn Renaissance man pit slave!
This is my first foray into wiring on this level but thus far I am really enjoying the process. The tools and materials were a huge up front investment for me but it seems well worth it. If you or any other knowledgable fellas here have any pointers or suggestions I'm all ears, I've only read about all this up until now but am eager to learn and do! Doing the entire truck would be fantastic, just incredibly expensive and time consuming lol. I'll probably do it piece by piece through the years as things need attention though.
Started work on the gps interior harness this afternoon. Going to cap off the nmea harness for now, but want to have it accessible if I need to network things in the future.
#crimpinainteasy
#^truth^
This is my first foray into wiring on this level but thus far I am really enjoying the process. The tools and materials were a huge up front investment for me but it seems well worth it. If you or any other knowledgable fellas here have any pointers or suggestions I'm all ears, I've only read about all this up until now but am eager to learn and do! Doing the entire truck would be fantastic, just incredibly expensive and time consuming lol. I'll probably do it piece by piece through the years as things need attention though.
Started work on the gps interior harness this afternoon. Going to cap off the nmea harness for now, but want to have it accessible if I need to network things in the future.
#crimpinainteasy
#^truth^
Central Texas and Houston area
2009 5.7 auto quadcab
Carli 3” coils deaver leafs 3” kings with 4 tube bypass rear and fr/rr hydro bumps
Howe steering pump and gear with hydraulic ram assist
Custom tube bumpers and white knuckle sliders
Creative fab trussed axle. rem polished and cryoed 5.13 gears with arb lockers fr/rr
Sharadon stage 2 545rfe with 3000 stall edge converter
Lots of other stuff lol
2009 5.7 auto quadcab
Carli 3” coils deaver leafs 3” kings with 4 tube bypass rear and fr/rr hydro bumps
Howe steering pump and gear with hydraulic ram assist
Custom tube bumpers and white knuckle sliders
Creative fab trussed axle. rem polished and cryoed 5.13 gears with arb lockers fr/rr
Sharadon stage 2 545rfe with 3000 stall edge converter
Lots of other stuff lol
- NovA ProspekT
- 50_Posts
- Posts: 165
- Joined: Tue Jan 05, 2016 11:53 am
- Model Year: 2007
- Location: New Hampshire - Live Free or Die
- Contact:
Re: Boogie wagon take 2
Love your truck man!
I like where you mounted the GPS antenna, beats drilling a hole through your roof.
Maybe I missed it, did you mount your Bussman fuse block yet? I'm about to order their RFRM(40-fuse, 10-relay), though I'm not sure where I am going to mount it yet. Right now I'm thinking of grabbing some sheet metal and making some kind of quick-detach/hinged mount somewhere near the stock fuse-box.
I like where you mounted the GPS antenna, beats drilling a hole through your roof.
Maybe I missed it, did you mount your Bussman fuse block yet? I'm about to order their RFRM(40-fuse, 10-relay), though I'm not sure where I am going to mount it yet. Right now I'm thinking of grabbing some sheet metal and making some kind of quick-detach/hinged mount somewhere near the stock fuse-box.
2007 DODGE POWER WAGON: 5.7L Hemi V8/Auto, Quad Cab, Flame Red
- Spintech Super Pro Street 9000 Muffler, Electronic Exhaust Cutout, Transgo Shift-Kit
- COOPER S/T MAXX(37x12.5R17), Carli High Clearance Control Arms, Carli HD Ball-joints
- Aluminess Front Bumper, Back Rack w/ Side-rails, Truxedo LoPro QT Tonneau Cover
- JW Speaker TS4000 Driving Lights, Grote 30" LED Off-road Light Bar, Bosch Compact 100 Fog Lights
2004 JEEP GRAND CHEROKEE OVERLAND: 4.7L High Output PowerTech V8, Quadra-Drive, Inferno Red
- OME HD 1.5" Lift Coil Springs, Bilstein 5100 Shocks, JKS HD Trackbar, Core4x4 Tier4 Control Arms
- Nokian Hakkapeliitta 9 SUV(245/70R17) Winter Tires, 3" Exhaust w/ Magnaflow Cats/Y-Pipe & Muffler
- JW Speaker TS4000 Driving Lights, Hella 350 LED Wide Beam Light Bar
1998 JEEP GRAND CHEROKEE 5.9 LIMITED: 5.9L Magnum R/T V8, Quadra-Trac, Deep Slate Black
- H&R Sport Progressive Springs w/spacers(Stock height), Bilstein 4600 Shocks, OEM Euro Headlamps
- Doug Thorley Tri-Y Long-tube headers, MOPAR M1 Intake, BBK Power Plus twin 52mm Throttle Body
[My Flickr] - [Power Wagon Build Thread]
“The death-knell of the republic had rung as soon as the active power became lodged in the hands of those who sought, not to do justice to all citizens, rich and poor alike, but to stand for one special class and for its interests as opposed to the interests of others.” ~ Theodore Roosevelt
- Spintech Super Pro Street 9000 Muffler, Electronic Exhaust Cutout, Transgo Shift-Kit
- COOPER S/T MAXX(37x12.5R17), Carli High Clearance Control Arms, Carli HD Ball-joints
- Aluminess Front Bumper, Back Rack w/ Side-rails, Truxedo LoPro QT Tonneau Cover
- JW Speaker TS4000 Driving Lights, Grote 30" LED Off-road Light Bar, Bosch Compact 100 Fog Lights
2004 JEEP GRAND CHEROKEE OVERLAND: 4.7L High Output PowerTech V8, Quadra-Drive, Inferno Red
- OME HD 1.5" Lift Coil Springs, Bilstein 5100 Shocks, JKS HD Trackbar, Core4x4 Tier4 Control Arms
- Nokian Hakkapeliitta 9 SUV(245/70R17) Winter Tires, 3" Exhaust w/ Magnaflow Cats/Y-Pipe & Muffler
- JW Speaker TS4000 Driving Lights, Hella 350 LED Wide Beam Light Bar
1998 JEEP GRAND CHEROKEE 5.9 LIMITED: 5.9L Magnum R/T V8, Quadra-Trac, Deep Slate Black
- H&R Sport Progressive Springs w/spacers(Stock height), Bilstein 4600 Shocks, OEM Euro Headlamps
- Doug Thorley Tri-Y Long-tube headers, MOPAR M1 Intake, BBK Power Plus twin 52mm Throttle Body
[My Flickr] - [Power Wagon Build Thread]
“The death-knell of the republic had rung as soon as the active power became lodged in the hands of those who sought, not to do justice to all citizens, rich and poor alike, but to stand for one special class and for its interests as opposed to the interests of others.” ~ Theodore Roosevelt
Re: Boogie wagon take 2
Thanks man! I haven't mounted my block yet, I've been having trouble placing it in the engine bay. It's very tight over by the tipm. Current thinking is that I'll place it over by the airbox. Probably make some sort of sheet metal bracket as well. You're getting the big boy! That thing won't be easy to find a place for. Definitely do a write up when you get around to it!
Central Texas and Houston area
2009 5.7 auto quadcab
Carli 3” coils deaver leafs 3” kings with 4 tube bypass rear and fr/rr hydro bumps
Howe steering pump and gear with hydraulic ram assist
Custom tube bumpers and white knuckle sliders
Creative fab trussed axle. rem polished and cryoed 5.13 gears with arb lockers fr/rr
Sharadon stage 2 545rfe with 3000 stall edge converter
Lots of other stuff lol
2009 5.7 auto quadcab
Carli 3” coils deaver leafs 3” kings with 4 tube bypass rear and fr/rr hydro bumps
Howe steering pump and gear with hydraulic ram assist
Custom tube bumpers and white knuckle sliders
Creative fab trussed axle. rem polished and cryoed 5.13 gears with arb lockers fr/rr
Sharadon stage 2 545rfe with 3000 stall edge converter
Lots of other stuff lol
- NovA ProspekT
- 50_Posts
- Posts: 165
- Joined: Tue Jan 05, 2016 11:53 am
- Model Year: 2007
- Location: New Hampshire - Live Free or Die
- Contact:
Re: Boogie wagon take 2
Yeah, I'll definitely do a good write-up on the Bussmann unit(and the mount), there doesn't seem to be much info on them. Might have to fit it over by the airbox, though I'd prefer to keep it near the stock box for ease of wiring.
2007 DODGE POWER WAGON: 5.7L Hemi V8/Auto, Quad Cab, Flame Red
- Spintech Super Pro Street 9000 Muffler, Electronic Exhaust Cutout, Transgo Shift-Kit
- COOPER S/T MAXX(37x12.5R17), Carli High Clearance Control Arms, Carli HD Ball-joints
- Aluminess Front Bumper, Back Rack w/ Side-rails, Truxedo LoPro QT Tonneau Cover
- JW Speaker TS4000 Driving Lights, Grote 30" LED Off-road Light Bar, Bosch Compact 100 Fog Lights
2004 JEEP GRAND CHEROKEE OVERLAND: 4.7L High Output PowerTech V8, Quadra-Drive, Inferno Red
- OME HD 1.5" Lift Coil Springs, Bilstein 5100 Shocks, JKS HD Trackbar, Core4x4 Tier4 Control Arms
- Nokian Hakkapeliitta 9 SUV(245/70R17) Winter Tires, 3" Exhaust w/ Magnaflow Cats/Y-Pipe & Muffler
- JW Speaker TS4000 Driving Lights, Hella 350 LED Wide Beam Light Bar
1998 JEEP GRAND CHEROKEE 5.9 LIMITED: 5.9L Magnum R/T V8, Quadra-Trac, Deep Slate Black
- H&R Sport Progressive Springs w/spacers(Stock height), Bilstein 4600 Shocks, OEM Euro Headlamps
- Doug Thorley Tri-Y Long-tube headers, MOPAR M1 Intake, BBK Power Plus twin 52mm Throttle Body
[My Flickr] - [Power Wagon Build Thread]
“The death-knell of the republic had rung as soon as the active power became lodged in the hands of those who sought, not to do justice to all citizens, rich and poor alike, but to stand for one special class and for its interests as opposed to the interests of others.” ~ Theodore Roosevelt
- Spintech Super Pro Street 9000 Muffler, Electronic Exhaust Cutout, Transgo Shift-Kit
- COOPER S/T MAXX(37x12.5R17), Carli High Clearance Control Arms, Carli HD Ball-joints
- Aluminess Front Bumper, Back Rack w/ Side-rails, Truxedo LoPro QT Tonneau Cover
- JW Speaker TS4000 Driving Lights, Grote 30" LED Off-road Light Bar, Bosch Compact 100 Fog Lights
2004 JEEP GRAND CHEROKEE OVERLAND: 4.7L High Output PowerTech V8, Quadra-Drive, Inferno Red
- OME HD 1.5" Lift Coil Springs, Bilstein 5100 Shocks, JKS HD Trackbar, Core4x4 Tier4 Control Arms
- Nokian Hakkapeliitta 9 SUV(245/70R17) Winter Tires, 3" Exhaust w/ Magnaflow Cats/Y-Pipe & Muffler
- JW Speaker TS4000 Driving Lights, Hella 350 LED Wide Beam Light Bar
1998 JEEP GRAND CHEROKEE 5.9 LIMITED: 5.9L Magnum R/T V8, Quadra-Trac, Deep Slate Black
- H&R Sport Progressive Springs w/spacers(Stock height), Bilstein 4600 Shocks, OEM Euro Headlamps
- Doug Thorley Tri-Y Long-tube headers, MOPAR M1 Intake, BBK Power Plus twin 52mm Throttle Body
[My Flickr] - [Power Wagon Build Thread]
“The death-knell of the republic had rung as soon as the active power became lodged in the hands of those who sought, not to do justice to all citizens, rich and poor alike, but to stand for one special class and for its interests as opposed to the interests of others.” ~ Theodore Roosevelt
-
- 2000_Posts
- Posts: 2970
- Joined: Wed Jan 16, 2013 6:55 pm
- Location: ontario canada
Re: Boogie wagon take 2
Damn them are big wires ! Looks like your going all 26th century and running fibre optic for everything
Sent from Canada
Sent from Canada
if guns kill people
pencils mispell words
cars make people drive drunk
and spoons made rosie o'donnel fat
"The one thing you realize when you aquire your trade standard is you realistically don't know Anything"
pencils mispell words
cars make people drive drunk
and spoons made rosie o'donnel fat
"The one thing you realize when you aquire your trade standard is you realistically don't know Anything"
Re: Boogie wagon take 2
Done with all the in cab wire harness construction and moving on to the air locker plumbing next.
- Attachments
Central Texas and Houston area
2009 5.7 auto quadcab
Carli 3” coils deaver leafs 3” kings with 4 tube bypass rear and fr/rr hydro bumps
Howe steering pump and gear with hydraulic ram assist
Custom tube bumpers and white knuckle sliders
Creative fab trussed axle. rem polished and cryoed 5.13 gears with arb lockers fr/rr
Sharadon stage 2 545rfe with 3000 stall edge converter
Lots of other stuff lol
2009 5.7 auto quadcab
Carli 3” coils deaver leafs 3” kings with 4 tube bypass rear and fr/rr hydro bumps
Howe steering pump and gear with hydraulic ram assist
Custom tube bumpers and white knuckle sliders
Creative fab trussed axle. rem polished and cryoed 5.13 gears with arb lockers fr/rr
Sharadon stage 2 545rfe with 3000 stall edge converter
Lots of other stuff lol
- 05PWrockcrawler
- 1000_Posts
- Posts: 1898
- Joined: Sat Mar 30, 2013 10:56 pm
Re: Boogie wagon take 2
Fancy fancy
Sent from my iPhone using Tapatalk/hopefully somewhere Offroad!
Sent from my iPhone using Tapatalk/hopefully somewhere Offroad!
-
- 2000_Posts
- Posts: 2970
- Joined: Wed Jan 16, 2013 6:55 pm
- Location: ontario canada
Re: Boogie wagon take 2
Sweet
Sent from Canada
Sent from Canada
if guns kill people
pencils mispell words
cars make people drive drunk
and spoons made rosie o'donnel fat
"The one thing you realize when you aquire your trade standard is you realistically don't know Anything"
pencils mispell words
cars make people drive drunk
and spoons made rosie o'donnel fat
"The one thing you realize when you aquire your trade standard is you realistically don't know Anything"
Re: Boogie wagon take 2
Just put a deposit on a rollcage kit for the wagon! Should be bent up and notched and shipped in about a month. Here are some pics of the cage kit installed in another 3rd gen crew cab
Central Texas and Houston area
2009 5.7 auto quadcab
Carli 3” coils deaver leafs 3” kings with 4 tube bypass rear and fr/rr hydro bumps
Howe steering pump and gear with hydraulic ram assist
Custom tube bumpers and white knuckle sliders
Creative fab trussed axle. rem polished and cryoed 5.13 gears with arb lockers fr/rr
Sharadon stage 2 545rfe with 3000 stall edge converter
Lots of other stuff lol
2009 5.7 auto quadcab
Carli 3” coils deaver leafs 3” kings with 4 tube bypass rear and fr/rr hydro bumps
Howe steering pump and gear with hydraulic ram assist
Custom tube bumpers and white knuckle sliders
Creative fab trussed axle. rem polished and cryoed 5.13 gears with arb lockers fr/rr
Sharadon stage 2 545rfe with 3000 stall edge converter
Lots of other stuff lol
Re: Boogie wagon take 2
That's just fucking awesome!
2010 with 37" hooves, controlled by numerous Thuren parts and Thuren Custom King 2.5's (Moved to a new home)
viewtopic.php?f=13&t=2333
I only do what the majority of the 4 voices in my head tell me to. In most cases, I ignore two of them because one doesn't speak English, and I suspect the other is talking to someone else.
viewtopic.php?f=13&t=2333
I only do what the majority of the 4 voices in my head tell me to. In most cases, I ignore two of them because one doesn't speak English, and I suspect the other is talking to someone else.
-
- 2000_Posts
- Posts: 2970
- Joined: Wed Jan 16, 2013 6:55 pm
- Location: ontario canada
Re: Boogie wagon take 2
Hey Tim stoked you actually pulled the trigger! What are these mounts everyone is speaking of?!?
Sent from Canada
Sent from Canada
if guns kill people
pencils mispell words
cars make people drive drunk
and spoons made rosie o'donnel fat
"The one thing you realize when you aquire your trade standard is you realistically don't know Anything"
pencils mispell words
cars make people drive drunk
and spoons made rosie o'donnel fat
"The one thing you realize when you aquire your trade standard is you realistically don't know Anything"
- Stickman
- 500_Posts
- Posts: 829
- Joined: Mon Nov 18, 2013 12:02 am
- Model Year: 2012
- Location: Wayland, MO
Re: Boogie wagon take 2
A really cleanly installed cage would be a very cool addition, even to a daily driver. Looking forward to seeing this in yours.
Live To Ride, Ride To Live
2012 Ram Power Wagon - Check out my build thread to see my mods! http://forum.powerwagonregistry.org/vie ... =13&t=2187
2012 Ram Power Wagon - Check out my build thread to see my mods! http://forum.powerwagonregistry.org/vie ... =13&t=2187
Re: Boogie wagon take 2
Thanks guys! Debating now which seats to go with, I'm leaning towards the prp enduro tied into the cage.
Lee, maybe you're referring to the body mounts for the cab? When you tie the cage to the body and the frame you need to either rubber bushing mount the cage or use solid body mounts so you don't cause problems between the two. Not sure which way I'll go with the cage mounts just yet
Lee, maybe you're referring to the body mounts for the cab? When you tie the cage to the body and the frame you need to either rubber bushing mount the cage or use solid body mounts so you don't cause problems between the two. Not sure which way I'll go with the cage mounts just yet
- Attachments
Central Texas and Houston area
2009 5.7 auto quadcab
Carli 3” coils deaver leafs 3” kings with 4 tube bypass rear and fr/rr hydro bumps
Howe steering pump and gear with hydraulic ram assist
Custom tube bumpers and white knuckle sliders
Creative fab trussed axle. rem polished and cryoed 5.13 gears with arb lockers fr/rr
Sharadon stage 2 545rfe with 3000 stall edge converter
Lots of other stuff lol
2009 5.7 auto quadcab
Carli 3” coils deaver leafs 3” kings with 4 tube bypass rear and fr/rr hydro bumps
Howe steering pump and gear with hydraulic ram assist
Custom tube bumpers and white knuckle sliders
Creative fab trussed axle. rem polished and cryoed 5.13 gears with arb lockers fr/rr
Sharadon stage 2 545rfe with 3000 stall edge converter
Lots of other stuff lol
- Reloaderguy
- 2000_Posts
- Posts: 2193
- Joined: Tue Feb 09, 2016 8:06 am
- Model Year: 2016
- Location: Central Oregon
Re: Boogie wagon take 2
I do not need a cage...I do not need a cage...I do not need a cage. La la la la laaaaa.
Awesome!
Awesome!
-
- 2000_Posts
- Posts: 2970
- Joined: Wed Jan 16, 2013 6:55 pm
- Location: ontario canada
Re: Boogie wagon take 2
Lol ok that makes sense!!!
Sent from Canada
Sent from Canada
if guns kill people
pencils mispell words
cars make people drive drunk
and spoons made rosie o'donnel fat
"The one thing you realize when you aquire your trade standard is you realistically don't know Anything"
pencils mispell words
cars make people drive drunk
and spoons made rosie o'donnel fat
"The one thing you realize when you aquire your trade standard is you realistically don't know Anything"
- adeluca73
- 2000_Posts
- Posts: 2126
- Joined: Mon May 19, 2014 11:56 pm
- Model Year: 2014
- Location: The Pentagon, VA
Re: Boogie wagon take 2
Just finished reading the entire build out--took me a few days here and there, but holy F man, that's some impressive work, you must be a mechanic in your other life....
Re: Boogie wagon take 2
The factory cab mounts must go, they're on my list.
2010 with 37" hooves, controlled by numerous Thuren parts and Thuren Custom King 2.5's (Moved to a new home)
viewtopic.php?f=13&t=2333
I only do what the majority of the 4 voices in my head tell me to. In most cases, I ignore two of them because one doesn't speak English, and I suspect the other is talking to someone else.
viewtopic.php?f=13&t=2333
I only do what the majority of the 4 voices in my head tell me to. In most cases, I ignore two of them because one doesn't speak English, and I suspect the other is talking to someone else.
Re: Boogie wagon take 2
Hahaha thanks for the kind words! I actually am ASE master certified lol. Doesn't mean as much as it should though.
Will, go get some hockey pucks and a drill man! Save your cab corners from further damage
Will, go get some hockey pucks and a drill man! Save your cab corners from further damage
Central Texas and Houston area
2009 5.7 auto quadcab
Carli 3” coils deaver leafs 3” kings with 4 tube bypass rear and fr/rr hydro bumps
Howe steering pump and gear with hydraulic ram assist
Custom tube bumpers and white knuckle sliders
Creative fab trussed axle. rem polished and cryoed 5.13 gears with arb lockers fr/rr
Sharadon stage 2 545rfe with 3000 stall edge converter
Lots of other stuff lol
2009 5.7 auto quadcab
Carli 3” coils deaver leafs 3” kings with 4 tube bypass rear and fr/rr hydro bumps
Howe steering pump and gear with hydraulic ram assist
Custom tube bumpers and white knuckle sliders
Creative fab trussed axle. rem polished and cryoed 5.13 gears with arb lockers fr/rr
Sharadon stage 2 545rfe with 3000 stall edge converter
Lots of other stuff lol
- NovA ProspekT
- 50_Posts
- Posts: 165
- Joined: Tue Jan 05, 2016 11:53 am
- Model Year: 2007
- Location: New Hampshire - Live Free or Die
- Contact:
Re: Boogie wagon take 2
Bro, that cage...
Is there a company making these?
Can't wait to see what it looks like when everything is finished. Safety equipment may not be sexy, but nothing's more important.
Is there a company making these?
Can't wait to see what it looks like when everything is finished. Safety equipment may not be sexy, but nothing's more important.
2007 DODGE POWER WAGON: 5.7L Hemi V8/Auto, Quad Cab, Flame Red
- Spintech Super Pro Street 9000 Muffler, Electronic Exhaust Cutout, Transgo Shift-Kit
- COOPER S/T MAXX(37x12.5R17), Carli High Clearance Control Arms, Carli HD Ball-joints
- Aluminess Front Bumper, Back Rack w/ Side-rails, Truxedo LoPro QT Tonneau Cover
- JW Speaker TS4000 Driving Lights, Grote 30" LED Off-road Light Bar, Bosch Compact 100 Fog Lights
2004 JEEP GRAND CHEROKEE OVERLAND: 4.7L High Output PowerTech V8, Quadra-Drive, Inferno Red
- OME HD 1.5" Lift Coil Springs, Bilstein 5100 Shocks, JKS HD Trackbar, Core4x4 Tier4 Control Arms
- Nokian Hakkapeliitta 9 SUV(245/70R17) Winter Tires, 3" Exhaust w/ Magnaflow Cats/Y-Pipe & Muffler
- JW Speaker TS4000 Driving Lights, Hella 350 LED Wide Beam Light Bar
1998 JEEP GRAND CHEROKEE 5.9 LIMITED: 5.9L Magnum R/T V8, Quadra-Trac, Deep Slate Black
- H&R Sport Progressive Springs w/spacers(Stock height), Bilstein 4600 Shocks, OEM Euro Headlamps
- Doug Thorley Tri-Y Long-tube headers, MOPAR M1 Intake, BBK Power Plus twin 52mm Throttle Body
[My Flickr] - [Power Wagon Build Thread]
“The death-knell of the republic had rung as soon as the active power became lodged in the hands of those who sought, not to do justice to all citizens, rich and poor alike, but to stand for one special class and for its interests as opposed to the interests of others.” ~ Theodore Roosevelt
- Spintech Super Pro Street 9000 Muffler, Electronic Exhaust Cutout, Transgo Shift-Kit
- COOPER S/T MAXX(37x12.5R17), Carli High Clearance Control Arms, Carli HD Ball-joints
- Aluminess Front Bumper, Back Rack w/ Side-rails, Truxedo LoPro QT Tonneau Cover
- JW Speaker TS4000 Driving Lights, Grote 30" LED Off-road Light Bar, Bosch Compact 100 Fog Lights
2004 JEEP GRAND CHEROKEE OVERLAND: 4.7L High Output PowerTech V8, Quadra-Drive, Inferno Red
- OME HD 1.5" Lift Coil Springs, Bilstein 5100 Shocks, JKS HD Trackbar, Core4x4 Tier4 Control Arms
- Nokian Hakkapeliitta 9 SUV(245/70R17) Winter Tires, 3" Exhaust w/ Magnaflow Cats/Y-Pipe & Muffler
- JW Speaker TS4000 Driving Lights, Hella 350 LED Wide Beam Light Bar
1998 JEEP GRAND CHEROKEE 5.9 LIMITED: 5.9L Magnum R/T V8, Quadra-Trac, Deep Slate Black
- H&R Sport Progressive Springs w/spacers(Stock height), Bilstein 4600 Shocks, OEM Euro Headlamps
- Doug Thorley Tri-Y Long-tube headers, MOPAR M1 Intake, BBK Power Plus twin 52mm Throttle Body
[My Flickr] - [Power Wagon Build Thread]
“The death-knell of the republic had rung as soon as the active power became lodged in the hands of those who sought, not to do justice to all citizens, rich and poor alike, but to stand for one special class and for its interests as opposed to the interests of others.” ~ Theodore Roosevelt
Re: Boogie wagon take 2
Hockey puck? Man, I'm in Florida, never even seen a hockey puck! HahaColibri wrote:Hahaha thanks for the kind words! I actually am ASE master certified lol. Doesn't mean as much as it should though.
Will, go get some hockey pucks and a drill man! Save your cab corners from further damage
2010 with 37" hooves, controlled by numerous Thuren parts and Thuren Custom King 2.5's (Moved to a new home)
viewtopic.php?f=13&t=2333
I only do what the majority of the 4 voices in my head tell me to. In most cases, I ignore two of them because one doesn't speak English, and I suspect the other is talking to someone else.
viewtopic.php?f=13&t=2333
I only do what the majority of the 4 voices in my head tell me to. In most cases, I ignore two of them because one doesn't speak English, and I suspect the other is talking to someone else.
- nts007
- 2000_Posts
- Posts: 2284
- Joined: Wed Dec 11, 2013 10:01 pm
- Model Year: 2008
- Location: Sask, Canada, Earth
Re: Boogie wagon take 2
How many do you want. I have a shed full
08 ctd--mini max--thuren 3" coils and LT Leaves--4.56 gears and lockers in pw axles--some lights--afe intake system--bd super b turbo--Banks w/m Injection--Dynatrac Balljoints--king 2.5"s--37" Hankook Dynapro MT--DOR Long arms--Custom emf track bar--Manual T-case swap--Full PW Under armor--PSC Hydro Assist and so much more
Re: Boogie wagon take 2
I can order them, just saying it's not like I can run to the store and pick them up. Never would have thought of it.
2010 with 37" hooves, controlled by numerous Thuren parts and Thuren Custom King 2.5's (Moved to a new home)
viewtopic.php?f=13&t=2333
I only do what the majority of the 4 voices in my head tell me to. In most cases, I ignore two of them because one doesn't speak English, and I suspect the other is talking to someone else.
viewtopic.php?f=13&t=2333
I only do what the majority of the 4 voices in my head tell me to. In most cases, I ignore two of them because one doesn't speak English, and I suspect the other is talking to someone else.