2016canadianPW 's Build - 2016 Power Wagon

Start your thread and show everyone your build out.
2016canadianPW
Posts: 9
Joined: Fri Aug 14, 2015 7:20 pm
Model Year: 2014

2016canadianPW 's Build - 2016 Power Wagon

Post by 2016canadianPW » Fri Aug 14, 2015 10:02 pm

Hey guys new to the forum, ordered a 2016 power wagon my first one. I owned alot of cars prior to that. First truck was a 2014 1500 Junk. So i traded up for a power wagon. Havent got it yet or even seen it. Before it gets to me ill be running:
6 inch pro-comp stage 1 lift
Fox Resi 2.0 shocks front
Fox 2.0 Performance rear
Fox steering Damper
37s MT MTZ
17s MT sidebiter 2
Full 2016 locker bypass
Custom made 1/4 steel reinforced bumper rated at 20000lbs
Custom made Rocksliders rated at 10000lbs
Linex front/rear, box, rocksliders, and rockguarding quarters and doors
30" front n name lightbar
54" Curved Ridgid Flush windshield mount.

Im hoping ill never have to get rid of this truck. Thisll be my last kick at a dodge. Ive got high hopes!!!!
Last edited by 2016canadianPW on Sun Aug 16, 2015 7:17 am, edited 1 time in total.

TwinStick
2000_Posts
2000_Posts
Posts: 4125
Joined: Mon May 28, 2012 7:58 pm
Model Year: 2008

Re: 2016 PW build

Post by TwinStick » Sun Aug 16, 2015 1:06 am

Congrats on the 2016 !!! :rockon: Welcome to the forum.

Now, about those typo's !!! LOL :lol: I am thinking you meant ", instead of '. If not, then that is one BIG ASS lift, complete with big ass lightbars & big ass tires !!! :rofl:
In WNY State. 2008 Red QC PW G56. No lift yet, stock size tires. It pulls an 18' 2016 Starcraft AR One Extreme, 3500 lbs.
Load Pro 35 helper springs. 2015 A.R.E. MX Series custom cap. PCP front diff cover protector. Mag-Hytec 6 qt rear diff cover. K&N replacement air filter only. Dual grounded throttle body. Winch TPC bypass. Fab Four rear bumper. DURA BAK lined rocker protection. And a bunch of new front end stuff.

G-56 Gear ratios: 1st) 6.29:1 2nd) 3.48:1 3rd) 2.10:1 4th) 1.38:1 5th) 1.0:1 6th) 0.79:1 Rev 6.29:1 --- = 78.01613:1 Crawl Ratio
-------------------------5.94:1--------3.28:1-------1.98:1-------1.31:1-------1.0:1-------0.74:1-----5.42:1 ---- = 73.675:1
545RFE----------------3.0:1---------1.67:1--------1.0:1--------0.75:1-------0.67:1------------------3.0:1 -------=37.21:1

2013+ 32.47 crawl ratio...............Can you see the trend ??????????????

2016canadianPW
Posts: 9
Joined: Fri Aug 14, 2015 7:20 pm
Model Year: 2014

Re: 2016 PW build

Post by 2016canadianPW » Sun Aug 16, 2015 7:15 am

Haha yes your right. I haven't been on a forum in year. Totally forgot how to edit and such. Using a small iphone doesnt help at all. Yes 6 inch lift. Lol

2wagons1driveway
2000_Posts
2000_Posts
Posts: 2943
Joined: Wed Jan 16, 2013 6:55 pm
Location: ontario canada

Re: 2016 PW build

Post by 2wagons1driveway » Mon Aug 17, 2015 11:20 pm

Where abouts are ya? There's a bunch of us Edmonton/ area/ Alberta. Just moved from Ontario. If you need any help with lift issues and stuff I've seen quite a few of them...
ImageUploadedByTapatalk1439867979.191471.jpg
ImageUploadedByTapatalk1439867916.624208.jpg
ImageUploadedByTapatalk1439867840.440133.jpg
ImageUploadedByTapatalk1439867820.623095.jpg
ImageUploadedByTapatalk1439867806.374544.jpg
and I have corrected a ton! My trucks gone through a bunch of changes over the last two years mostly with suspension and chassis mods.


Sent from that big land mass the rest of the world hates
if guns kill people
pencils mispell words
cars make people drive drunk
and spoons made rosie o'donnel fat

"The one thing you realize when you aquire your trade standard is you realistically don't know Anything"

TwinStick
2000_Posts
2000_Posts
Posts: 4125
Joined: Mon May 28, 2012 7:58 pm
Model Year: 2008

Re: 2016 PW build

Post by TwinStick » Tue Aug 18, 2015 12:25 am

Just curious 2w1d, what are running for a lift now ?
In WNY State. 2008 Red QC PW G56. No lift yet, stock size tires. It pulls an 18' 2016 Starcraft AR One Extreme, 3500 lbs.
Load Pro 35 helper springs. 2015 A.R.E. MX Series custom cap. PCP front diff cover protector. Mag-Hytec 6 qt rear diff cover. K&N replacement air filter only. Dual grounded throttle body. Winch TPC bypass. Fab Four rear bumper. DURA BAK lined rocker protection. And a bunch of new front end stuff.

G-56 Gear ratios: 1st) 6.29:1 2nd) 3.48:1 3rd) 2.10:1 4th) 1.38:1 5th) 1.0:1 6th) 0.79:1 Rev 6.29:1 --- = 78.01613:1 Crawl Ratio
-------------------------5.94:1--------3.28:1-------1.98:1-------1.31:1-------1.0:1-------0.74:1-----5.42:1 ---- = 73.675:1
545RFE----------------3.0:1---------1.67:1--------1.0:1--------0.75:1-------0.67:1------------------3.0:1 -------=37.21:1

2013+ 32.47 crawl ratio...............Can you see the trend ??????????????

2wagons1driveway
2000_Posts
2000_Posts
Posts: 2943
Joined: Wed Jan 16, 2013 6:55 pm
Location: ontario canada

Re: 2016 PW build

Post by 2wagons1driveway » Tue Aug 18, 2015 9:08 am

A bastardized Carli set up. Thuren coils. Carli radius arms. Boogie rated bumps and drops. Carli dominator 3" king shocks with 12" strokes. Thuren track bar. Custom leafs and Thuren shackles. Set up works okay but my leafs are too soft for the rear dominators and the tune isn't quite right for me so their coming off and I'll be going Thuren towers and Thuren shocks all four corners.


Sent from that big land mass the rest of the world hates
if guns kill people
pencils mispell words
cars make people drive drunk
and spoons made rosie o'donnel fat

"The one thing you realize when you aquire your trade standard is you realistically don't know Anything"

User avatar
14PowerWaggy
50_Posts
50_Posts
Posts: 239
Joined: Fri Aug 22, 2014 11:56 am
Model Year: 2014
Location: Georgia

Re: 2016 PW build

Post by 14PowerWaggy » Tue Aug 18, 2015 10:49 am

That is going to be a gigantic truck... 6" on a new PW will give you room for 40's or so... I'm running 37's on my 15PW with no lift... You may also want to call FOX and make sure that they have fixed all the bugs with the shocks... When I spoke with Don Thuren he said there were a lot of problems with running the FOX 2.0's on the new radius arm trucks... Could be fixed now but may want to make sure before you drop all that coin... Welcome and I'm looking forward to seeing the truck completed...
2015 Granite Power Wagon... 37" Toyo MT's... Trail Ready wheels... Thuren Suspension... AEV ProCal

gun45boat
500_Posts
500_Posts
Posts: 751
Joined: Wed Apr 17, 2013 8:02 pm

Re: 2016 PW build

Post by gun45boat » Tue Aug 18, 2015 4:28 pm

Nice work... Nice truck;)

2016canadianPW
Posts: 9
Joined: Fri Aug 14, 2015 7:20 pm
Model Year: 2014

Re: 2016 PW build

Post by 2016canadianPW » Tue Aug 18, 2015 10:52 pm

Thanks Guys. I built it like this cause i got a wicked trade in value on my 14 1500. Im hoping the issues with the fox shocks is fixed but 4 wheel parts is holding my 60000km warranty so itll all be covered if anything happens. I decided not to dick around with this truck, i dicked around with the 1500 and went through 3 axle kits. one maybe from abuse, but the other two where from our last badass canadian winter. Oh ya im on the far east coast in Salisbury New Brunswick. As soon as its finished ill be posting some pics. Supposed to arrive end of next week, and 4 wheel parts is gonna have it for a few days.

2wagons1driveway
2000_Posts
2000_Posts
Posts: 2943
Joined: Wed Jan 16, 2013 6:55 pm
Location: ontario canada

Re: 2016 PW build

Post by 2wagons1driveway » Wed Aug 19, 2015 12:19 am

If you do 40's you better put 5.13's in at least!!!


Sent from that big land mass the rest of the world hates
if guns kill people
pencils mispell words
cars make people drive drunk
and spoons made rosie o'donnel fat

"The one thing you realize when you aquire your trade standard is you realistically don't know Anything"

2016canadianPW
Posts: 9
Joined: Fri Aug 14, 2015 7:20 pm
Model Year: 2014

Re: 2016 PW build

Post by 2016canadianPW » Wed Aug 19, 2015 10:13 am

40s i dont think ill need them anytime. 37s cost enough and should hold up perfectly to what i need. Unless someone was to sell some maybe.

2wagons1driveway
2000_Posts
2000_Posts
Posts: 2943
Joined: Wed Jan 16, 2013 6:55 pm
Location: ontario canada

Re: 2016 PW build

Post by 2wagons1driveway » Wed Aug 19, 2015 10:55 am

37's are good all around and a 6" lift is nice for Canadian terrain lots of rocker clearance for mud and bush runs


Sent from that big land mass the rest of the world hates
if guns kill people
pencils mispell words
cars make people drive drunk
and spoons made rosie o'donnel fat

"The one thing you realize when you aquire your trade standard is you realistically don't know Anything"

User avatar
04Ram2500Hemi
2000_Posts
2000_Posts
Posts: 2086
Joined: Thu May 31, 2012 12:19 pm
Model Year: 2012
Location: Missoula, MT

Re: 2016 PW build

Post by 04Ram2500Hemi » Wed Aug 19, 2015 5:38 pm

This sounds like one heck of a truck. I look forward to seeing the pictures.
2012 Ram Power Wagon: http://forum.powerwagonregistry.org/vie ... f=13&t=107
Truxedo Deuce Bed Cover with Bed Lights, Black Line-X Rocker Panel, Custom Built Rock Rails Sprayed with Line-X, Front & Rear Bumper and Grill sprayed with Line-X, Husky Mud Flaps, Husky Floor Mats, Four VisionX Xmitter Low Pro Prime XP LED Light Bars Behind the Grill, LED Lights Mounted in the Rear Bumper, Heated Seats, Interior LED Lighting, NAV-TV, Camera Mounted in Front Grill, Custom Headache Rack, AEV Raised Air Intake, AEV Salta HD Wheels in Onyx, 285/75/17 Toyo A/T II Tires

2016canadianPW
Posts: 9
Joined: Fri Aug 14, 2015 7:20 pm
Model Year: 2014

Re: 2016 PW build

Post by 2016canadianPW » Wed Aug 19, 2015 7:11 pm

Dealer called me today. Should be here early next week. Then 4wheel parts will have it for 4 days. Did yas want before and afters. It wont be fully finished till 2nd week in september. My buddy told me absolutely NO trailing or mud till he puts on the bumper, rockslides and linexs it all. Im getting some excited. My first real heavy duty vehicle. :shock: :box: First real lifted rig in General. My 1500 was leveled and aside from weak ankles. It performed well. I have good hopes for the PW

2wagons1driveway
2000_Posts
2000_Posts
Posts: 2943
Joined: Wed Jan 16, 2013 6:55 pm
Location: ontario canada

Re: 2016 PW build

Post by 2wagons1driveway » Mon Aug 24, 2015 11:46 am

Excited to see how it turns out


Sent from that big land mass the rest of the world hates
if guns kill people
pencils mispell words
cars make people drive drunk
and spoons made rosie o'donnel fat

"The one thing you realize when you aquire your trade standard is you realistically don't know Anything"

2016canadianPW
Posts: 9
Joined: Fri Aug 14, 2015 7:20 pm
Model Year: 2014

Re: 2016 PW build

Post by 2016canadianPW » Mon Sep 14, 2015 10:52 pm

image.jpg
Sorry for the long wait guys. Here it is ill post more pics when the light bar is on. :twisted:

2wagons1driveway
2000_Posts
2000_Posts
Posts: 2943
Joined: Wed Jan 16, 2013 6:55 pm
Location: ontario canada

Re: 2016 PW build

Post by 2wagons1driveway » Mon Sep 14, 2015 11:33 pm

Looks really good that's the bds lift?


Sent from my iPhone using Tapatalk
if guns kill people
pencils mispell words
cars make people drive drunk
and spoons made rosie o'donnel fat

"The one thing you realize when you aquire your trade standard is you realistically don't know Anything"

2016canadianPW
Posts: 9
Joined: Fri Aug 14, 2015 7:20 pm
Model Year: 2014

Re: 2016 PW build

Post by 2016canadianPW » Tue Sep 15, 2015 8:19 am

No its a Pro-Comp 6" on Fox 2.0 performance Rezzis

2wagons1driveway
2000_Posts
2000_Posts
Posts: 2943
Joined: Wed Jan 16, 2013 6:55 pm
Location: ontario canada

Re: 2016 PW build

Post by 2wagons1driveway » Tue Sep 15, 2015 8:51 am

Nice looks sick rock rails going on soon and new bumper too?


Sent from my iPhone using Tapatalk
if guns kill people
pencils mispell words
cars make people drive drunk
and spoons made rosie o'donnel fat

"The one thing you realize when you aquire your trade standard is you realistically don't know Anything"

User avatar
2011TXPowerWagon
500_Posts
500_Posts
Posts: 512
Joined: Fri Aug 08, 2014 5:07 pm
Model Year: 2011
Location: Edinburg, Texas

Re: 2016 PW build

Post by 2011TXPowerWagon » Thu Sep 17, 2015 1:04 am

Whoa whoa you must not have read the fine print when buying your power wagon. If you lift it must be either Carli or Thuren, anything else and you have a mall crawler..... lol just messing with ya. Truck looks badass. Did you buy a lift for a regular 2500? Oddly enough I couldn't find any lifts for a power wagon, but yet the picture procomp uses is actually a power wagon. If you used a regular 2500 lift, how much kiddy did you actually net over stock?
"A government that robs Peter to pay Paul can always depend on the support of Paul."

-George Bernard Shaw

2016canadianPW
Posts: 9
Joined: Fri Aug 14, 2015 7:20 pm
Model Year: 2014

Re: 2016 PW build

Post by 2016canadianPW » Wed Sep 23, 2015 10:06 pm

Well frig guys. I took it for a muck the other day and it wont let me upload any of the pics. 6" pro comp was the only thing they would allow a warranty, i was very skeptical on the pro comp myself. I built my truck to specifically not be a mall crawler :wink: As for the bumper and the runners. My friend who made the bumper and IS GOING to make the rails had to take an emergency venture to Britsh Columbia for money. That being said i had the box, backrack, sides, flares and both bumpers line-x'd black. Also mounted the 54" RDS as well to windshield. This friday is my friends going away mudrun. Ill be strapping my go pro to it. Hopeully i can get some pics sized low enough to put up for your viewing pleasure. The electrical guy at 4wheelparta was unable to make a locker bypass function how he liked. So i did not get them done. I was pretty disappointed. Has the guy who does the harnesses ever figured out a 2016. Sorry im a forum newb i dont know his screen name. Seems a picture worked. This is just after i cleaned. And before the linex.
phpBB [video]

Clickable link for Tapatalk

. This is the only pic it will let me upload. Take care guys. To the 2011TX who asked if it was for the 2500, i believe it was a slightly tweaked version of the 2500 6" lift Yes....that is what was ordered. Pro comp tested them before they had been shipped. Or so i was told by 4wheelparts.
Attachments
image.jpg
After i cleaned it

2016canadianPW
Posts: 9
Joined: Fri Aug 14, 2015 7:20 pm
Model Year: 2014

Re: 2016 PW build

Post by 2016canadianPW » Mon Sep 28, 2015 11:16 pm

image.jpg
image.jpg
Some play time from the weekend.
Attachments
image.jpg

2wagons1driveway
2000_Posts
2000_Posts
Posts: 2943
Joined: Wed Jan 16, 2013 6:55 pm
Location: ontario canada

Re: 2016 PW build

Post by 2wagons1driveway » Tue Sep 29, 2015 10:30 pm

Nice


Sent from my iPhone using Tapatalk
if guns kill people
pencils mispell words
cars make people drive drunk
and spoons made rosie o'donnel fat

"The one thing you realize when you aquire your trade standard is you realistically don't know Anything"

User avatar
2011TXPowerWagon
500_Posts
500_Posts
Posts: 512
Joined: Fri Aug 08, 2014 5:07 pm
Model Year: 2011
Location: Edinburg, Texas

Re: 2016 PW build

Post by 2011TXPowerWagon » Mon Oct 12, 2015 12:01 am

Did you upload any video of that mud run?
"A government that robs Peter to pay Paul can always depend on the support of Paul."

-George Bernard Shaw

User avatar
adeluca73
2000_Posts
2000_Posts
Posts: 2158
Joined: Mon May 19, 2014 11:56 pm
Model Year: 2014
Location: The Pentagon, VA

Re: 2016 PW build

Post by adeluca73 » Sat Dec 12, 2015 12:48 am

2016canadianPW wrote:
image.jpg
Sorry for the long wait guys. Here it is ill post more pics when the light bar is on. :twisted:
Wow...looks awesome. Way to come out the gate swinging for the fences w/ the :cash: :cash: mods :rockon:
2014 Ram PW SLT: 1st year of the Best Gen
<Build Thread>

Post Reply