AlterEgo's Build - 2014 Power Wagon SLT

Start your thread and show everyone your build out.
User avatar
TommyG
250_Posts
250_Posts
Posts: 299
Joined: Sun Oct 05, 2014 2:41 pm
Model Year: 2012

Re: My 2014 build

Post by TommyG » Mon Aug 21, 2017 1:29 pm

I have been thinking of chopping mine for a while. Thanks for the pics. It really looks good.
2012 Power Wagon
White Knuckle Sliders, myoung locker bypass, Thuren Track Bar, Thuren Control Arms, Toyo Open Country RT 37x12.50

User avatar
2011TXPowerWagon
500_Posts
500_Posts
Posts: 512
Joined: Fri Aug 08, 2014 5:07 pm
Model Year: 2011
Location: Edinburg, Texas

Re: My 2014 build

Post by 2011TXPowerWagon » Wed Aug 23, 2017 9:03 pm

Thats what I have been thinking about for a long time, just didnt have the guts (or tools) to do it. Looks pretty good.
"A government that robs Peter to pay Paul can always depend on the support of Paul."

-George Bernard Shaw

AlterEgo
Posts: 40
Joined: Sun Oct 26, 2014 8:35 am
Model Year: 2014

Re: My 2014 build

Post by AlterEgo » Wed Aug 23, 2017 9:13 pm

2011TXPowerWagon wrote:Thats what I have been thinking about for a long time, just didnt have the guts (or tools) to do it. Looks pretty good.
All I used was the wrenches needed to remove the bumper and the fog light mounting brackets, and then a cut off wheel put on my angle grinder for the cutting.


Sent from my iPhone using Tapatalk Pro

User avatar
Will
2000_Posts
2000_Posts
Posts: 2515
Joined: Mon Jan 27, 2014 7:16 am
Model Year: 2010

Re: My 2014 build

Post by Will » Wed Aug 23, 2017 9:45 pm

The skin is only $400...
2010 with 37" hooves, controlled by numerous Thuren parts and Thuren Custom King 2.5's
http://forum.powerwagonregistry.org/vie ... =13&t=2333

I only do what the majority of the 4 voices in my head tell me to. In most cases, I ignore two of them because one doesn't speak English, and I suspect the other is talking to someone else.

laramieskibum
50_Posts
50_Posts
Posts: 82
Joined: Thu Aug 07, 2014 9:47 pm

Re: My 2014 build

Post by laramieskibum » Tue Aug 29, 2017 11:49 pm

Will wrote:The skin is only $400...
Junk yard bumpers are even less (unless your talking the pw bumper is specific to pw's, I duno.


Sent from my iPhone using Tapatalk
2014 CCSB Tradesman 2500 -- G56 -- AEV dualsport -- AEV Katla -- 37x12.5r17 Toyo MT -- 315/70r17 Nokian Hakkapeliitta -- AEV bumper -- VisionX 6.7" light cannon -- Warn 16.5TI -- Mopar flares -- 8.4" Uconnect swap w/ customtronix jailbreak (front/rear/trailer cam) -- 3.73 gears w/ ARB front and rear -- Switch-Pros 8100

2wagons1driveway
2000_Posts
2000_Posts
Posts: 2925
Joined: Wed Jan 16, 2013 6:55 pm
Location: ontario canada

Re: My 2014 build

Post by 2wagons1driveway » Thu Aug 31, 2017 12:04 pm

AlterEgo wrote:
IMG_1224.jpg
Some old pics, but I never posted about putting on my White Knuckle Sliders, I was the first one to get them for the 4th Gen PowerWagon. I also am running B.A.D. Wheels now. The truck is currently in the shop getting 4.88's put in.
Hey that truck in the back looks familiar... where are you mofo! Lol long time no see the edmonton crew wonders if you're still alive :p!


Sent from my iPhone using Tapatalk
if guns kill people
pencils mispell words
cars make people drive drunk
and spoons made rosie o'donnel fat

"The one thing you realize when you aquire your trade standard is you realistically don't know Anything"

2wagons1driveway
2000_Posts
2000_Posts
Posts: 2925
Joined: Wed Jan 16, 2013 6:55 pm
Location: ontario canada

Re: My 2014 build

Post by 2wagons1driveway » Thu Aug 31, 2017 12:05 pm

FYI bumper looks really good cut like that just needs some black bed liner and it will be mint!


Sent from my iPhone using Tapatalk
if guns kill people
pencils mispell words
cars make people drive drunk
and spoons made rosie o'donnel fat

"The one thing you realize when you aquire your trade standard is you realistically don't know Anything"

AlterEgo
Posts: 40
Joined: Sun Oct 26, 2014 8:35 am
Model Year: 2014

Re: My 2014 build

Post by AlterEgo » Thu Aug 31, 2017 7:33 pm

2wagons1driveway wrote:FYI bumper looks really good cut like that just needs some black bed liner and it will be mint!


Sent from my iPhone using Tapatalk
I intend to line-x it once I determine if I want to mount any lights on it or not.


Sent from my iPhone using Tapatalk Pro

AlterEgo
Posts: 40
Joined: Sun Oct 26, 2014 8:35 am
Model Year: 2014

Re: My 2014 build

Post by AlterEgo » Thu Aug 31, 2017 7:34 pm

2wagons1driveway wrote:
AlterEgo wrote:
IMG_1224.jpg
Some old pics, but I never posted about putting on my White Knuckle Sliders, I was the first one to get them for the 4th Gen PowerWagon. I also am running B.A.D. Wheels now. The truck is currently in the shop getting 4.88's put in.
Hey that truck in the back looks familiar... where are you mofo! Lol long time no see the edmonton crew wonders if you're still alive :p!


Sent from my iPhone using Tapatalk
Alive, but got transferred to Chilliwack


Sent from my iPhone using Tapatalk Pro

AlterEgo
Posts: 40
Joined: Sun Oct 26, 2014 8:35 am
Model Year: 2014

Re: My 2014 build

Post by AlterEgo » Mon Jun 11, 2018 10:23 pm

Finally got someone to build me a custom bumper. I am very happy with how it turned out.
Attachments
IMG_0115.jpg
IMG_0114.jpg
IMG_0116.jpg


Mule007
50_Posts
50_Posts
Posts: 137
Joined: Mon May 16, 2016 9:27 pm
Location: Colton, Oregon

Re: My 2014 build

Post by Mule007 » Tue Jun 12, 2018 7:10 am

Sweet! Loooks good, like the profile & lines complement the truck & clearances; Congrats!!! 👍
2005 Mineral Gray PW; Alloquin 3" rock rails w/low profile steps; 2.5" Skyjacker suspension lift kit; Toyo Open Country AT II Extreme-35 x 12.5 x 17 10 ply's; McQuay-Norris Extreme ball joints; T-steering upgrade w/Bilstein 5100 steering damper; Bilstein 5100 Mono tube nitrogen gas shocks; Denso 180 amp alternator, Interstate Mega-tron 850 CCA HD battery; MoPar rear wheel well liners, black accent fender flares, remote start, and Ravelco Anti theft device; Hopkins Trailer Mate trailer brake controller; Hemi 1 ton transmission cooler; Uniden Bearcat Pro 68XL CB radio; Linex Platinum black armor truck bed & lower rock panel armor coating; Matching Range Rider cab high fiberglass canopy; 2" Linex (matches Alloquin) round brush guard light bar w/ 4- KC HiLites Rally 400 Series 4" Halogen Driving/off road lights; Dyna-flow cat back dual exhaust; GT Platinum srt-10 A-pillar pod mount programmable performance chip, monitor, tuner; an S&B CAI.

User avatar
Bill2014
500_Posts
500_Posts
Posts: 923
Joined: Fri May 09, 2014 9:03 pm
Model Year: 2014
Location: Northern NY

Re: My 2014 build

Post by Bill2014 » Tue Jun 12, 2018 9:29 am

I rarely like any of the custom fab bumpers - But that bumper looks AWESOME on your truck!!!
:cheers:
2014 Power Wagon Laramie
Titan V5 2.5" Receiver Pintle Hook
Warn wireless winch controller
.188" DOM White Knuckle Rock Sliders
Locker Bypass

Moab 2006

User avatar
PWJouster
50_Posts
50_Posts
Posts: 157
Joined: Wed Dec 27, 2017 8:44 am
Model Year: 2018

Re: My 2014 build

Post by PWJouster » Tue Jun 12, 2018 11:58 am

how much...and can he make more...and with sensor holes? this is so perfect i cant stand it.
2018 Powerwagon
Thuren King 3.0-S3 & 2.5-S2 with King Stab, TBs, Boogies and
Dodge-Off-Road Steering Brace
Method NV 17s
Toyo RT 35x12.5/17
Purple Cranium F&R
S&B Intake
Exhaust

AlterEgo
Posts: 40
Joined: Sun Oct 26, 2014 8:35 am
Model Year: 2014

Re: My 2014 build

Post by AlterEgo » Tue Jun 12, 2018 8:22 pm

Here is the fabricators info. I am sure he could make any changes you needed.
Attachments
IMG_0117.jpg

User avatar
Reloaderguy
1000_Posts
1000_Posts
Posts: 1915
Joined: Tue Feb 09, 2016 8:06 am
Model Year: 2016
Location: Central Oregon

Re: My 2014 build

Post by Reloaderguy » Wed Jun 13, 2018 11:39 am

I might stop in and see what he can do.
Best Year Power Wagon

User avatar
olyelr
2000_Posts
2000_Posts
Posts: 3081
Joined: Sun Dec 07, 2014 9:00 pm
Model Year: 2016
Location: Kewadin, MI

Re: My 2014 build

Post by olyelr » Wed Jun 13, 2018 10:25 pm

Man I really dig the overall look of that bumper. I dont really care for the aesthetics of the large rectangle opening for the winch cable, but I understand why it is there. Kudos!!!!!!
2016 Ram Power Wagon Laramie - Granite Crystal Metallic - Ramboxes :patriot:

AlterEgo
Posts: 40
Joined: Sun Oct 26, 2014 8:35 am
Model Year: 2014

Re: My 2014 build

Post by AlterEgo » Sun Jun 17, 2018 12:01 am

I now have my flip up licence plate holder in the middle covering the fairlead. Breaks it up better.

User avatar
Mr.Smith
1000_Posts
1000_Posts
Posts: 1123
Joined: Wed Sep 04, 2013 6:36 pm
Model Year: 2009
Location: Fort Collins, CO.

Re: My 2014 build

Post by Mr.Smith » Sun Jun 17, 2018 3:23 pm

That bumper looks PHUC’N GR8! Well done Sir!

AlterEgo
Posts: 40
Joined: Sun Oct 26, 2014 8:35 am
Model Year: 2014

Re: AlterEgo's Build - 2014 Power Wagon SLT

Post by AlterEgo » Wed Aug 22, 2018 5:19 pm

Thanks, it helps to have a fabricator that understands what you want.

User avatar
adeluca73
2000_Posts
2000_Posts
Posts: 2158
Joined: Mon May 19, 2014 11:56 pm
Model Year: 2014
Location: The Pentagon, VA

Re: My 2014 build

Post by adeluca73 » Wed Aug 29, 2018 1:41 am

AlterEgo wrote:
Mon Jun 11, 2018 10:23 pm
Finally got someone to build me a custom bumper. I am very happy with how it turned out.
Congrats on that new bumper. What's the weight, over 100lbs? Is it ½ or ¼ plate? Does it mount to the snow plow fangs or the tow hooks?
2014 Ram PW SLT: 1st year of the Best Gen
<Build Thread>

AlterEgo
Posts: 40
Joined: Sun Oct 26, 2014 8:35 am
Model Year: 2014

Re: AlterEgo's Build - 2014 Power Wagon SLT

Post by AlterEgo » Wed Sep 19, 2018 4:02 pm

It uses the top two factory mounting bolts on each side, and then two on each side in the tow hook mounting holes. It is 3/16" plate. Not sure about the weight, but 100lbs sounds about right.

Post Reply