Board index General Member Builds

Start your thread and show everyone your build out.

Re: TD's 2014 Red PW Build Thread

Postby Stickman » Fri Jul 01, 2016 10:06 pm

Get some black rims and bigger tires and that thing will look straight up badass man, good job.
Live To Ride, Ride To Live

2012 Ram Power Wagon - Check out my build thread to see my mods! viewtopic.php?f=13&t=2187
User avatar
Stickman
500_Posts
 
Posts: 832
Joined: Sun Nov 17, 2013 11:02 pm
Location: Wayland, MO

Re: TD's 2014 Red PW Build Thread

Postby adeluca73 » Fri Jul 01, 2016 10:43 pm

Stickman wrote:Get some black rims and bigger tires and that thing will look straight up badass man, good job.


Thanks man...can't settle on a wheel yet. Want the TR beadlocks like 2Wags just put on, but $450/ea. Is steep. So either one of the AEV wheels or I might plastidip the stockers like you & Will did . Did you like the way they turned out? Durable? Pain to do?
2014 Ram PW SLT: Two tone Flame Red & Black
Completed Mods: Ram door sill guards, Front air deflector, WeatherTech slimline window deflectors, DiamondBack HD cover coated w/ Line-X, Mufflex MagnaFlow muffler & Resonator delete, Opti-Coat Pro 2.0, DeeZee tailgate strut, DeeZee ¼" fitted bed mat, Factor-55: FlatLink winch hook/Shorty Strap 3.0/Hitchlink 2.5, Warn Wireless Winch Remote, Locker by-pass, AEM dry filter, Truxedo LED bed lights wired into RamBox Connector, WhiteKnuckle sliders w/ full-length diamond plate coated in Line-X, Purple Cranium rear diff guard, AEV front/rear diff cover, AEV RAI w/ pre-filter, AEV ProCal (Bootleg'd), DOR Steering Box Brace, Phillips Hi intensity LEDs in cargo lamps & back-ups, triple anti-hop shocks, Truxx PW specific front 1.5" level, AAM 4.88's, custom black-out work, Line-X front/rear bumpers & wheel flares, 37" Nitto Ridge Grapplers, Plasti-dip PW wheels Black w/ Gunmetal metalizer, FilterMag kit, AMP Research BedStep
Next Mods: Thuren: {Coils, Track Bar, Boggie Bumps, King 2.5's shocks} , on-board air, HID low CANBUS replacement, LED HI, BD LED fogs
User avatar
adeluca73
2000_Posts
 
Posts: 2020
Joined: Mon May 19, 2014 9:56 pm
Location: The Pentagon, VA

Re: TD's 2014 Red PW Build Thread

Postby Reloaderguy » Sat Jul 02, 2016 11:23 am

adeluca73 wrote:
Stickman wrote:Get some black rims and bigger tires and that thing will look straight up badass man, good job.


Thanks man...can't settle on a wheel yet. Want the TR beadlocks like 2Wags just put on, but $450/ea. Is steep. So either one of the AEV wheels or I might plastidip the stockers like you & Will did . Did you like the way they turned out? Durable? Pain to do?


There are a lot of wheels on the markets that are every bit as good as the AEV. From what I've heard, AEV wheels are made by Wheel Pro who makes KMC XD's.

I'd love a set of TR beadlocks but I know if I bought them I'd end up wishing I bought a set of fakelocks. My last set of beadlocks were great offroad and terrible on road.
Best Year Power Wagon
User avatar
Reloaderguy
1000_Posts
 
Posts: 1261
Joined: Tue Feb 09, 2016 7:06 am
Location: Oregon

Re: TD's 2014 Red PW Build Thread

Postby Stickman » Sat Jul 02, 2016 9:41 pm

It was good for the money and time it took, held up great and was very easy to apply. Only down side I found was gravel dust sticks to it quite a bit.
Live To Ride, Ride To Live

2012 Ram Power Wagon - Check out my build thread to see my mods! viewtopic.php?f=13&t=2187
User avatar
Stickman
500_Posts
 
Posts: 832
Joined: Sun Nov 17, 2013 11:02 pm
Location: Wayland, MO

Stock PW wheels Black Plastidip + Gunmetal Metallizer

Postby adeluca73 » Tue Jul 12, 2016 11:11 am

MOD: OEM Wheel blackout
PRODUCT: Plastidip (black) & Metallizer (Gunmetal)
MFGR: dip your car.com ( bought wheel kit: 4x cans black & 3x cans metallizer)
COST: $55
TIME : 3-4 hrs

This was a great mod. Easy to do, but a little time consuming to do right. I researched the best way to do this from videos of shops that do entire vehicles & then set aside an afternoon to work on it. Here's the steps:

1. I used a degreaser on the wheels to remove all dirt, grime, brake dust
2. Wiped down with clean damp cloth
3. Taped off valve stem
4. Used plastic grocery bags, cut off handles, then cut open along both seams, and fished the bags through the spokes (2/wheel needed) & used a paint stick to tuck bags around calipers & rotors. Do not let bags rest against back of wheels or they could pull the dip off when you remove them
5. Used silicone tire shine to wipe along tire next to rim (don't get on rim) to aid in removing of over spray on tires.
6. Start laying a base coat of plastidip, recommend using a spray paint gun attachment, reduce hand fatigue & helps get even strokes & minimizes running. Concentrate on getting good coverage around edge of rim.
7. Move from one wheel yo next. Light coats are best. I let each coat dry 15-20 min before going to the next coat.
8. Repeat until satisfied. I put on 5 coats of black & only used 2 cans.
9. Let completely dry. Switch to the metallizer & apply coats to get your desired look. For me it was 2 solid coats, 1 can total used of the gun metal metalizer.
10. Let sit overnight, remove bags, inspect

The metalizer really brings this from an ok poor man's black out to a top end custom looking wheel. I'm really impressed how it turned out. The metallizer is also the recommended top coat to protect & harden the plastidip to give it a durable finish. I also put the metallizer on the center caps I had painted black/red enamel. It darkened up the caps & blended it with the look of the wheel. For $55 all in, I'd say if you like the PW wheels but not the polished Aluminum, give this a try, it comes in dozens of colors & is easy to peel & remove if you screw up or don't like the color. I have 2 cans of each left over, so plenty to do touch ups with. I'm sticking with this for now until I decide on the beadlocks I want once I move out west in a few years.
Attachments
image.jpeg
Wheel before
image.jpeg
Wheel after
image.jpeg
Side Before
image.jpeg
Side After
image.jpeg
A
Side After
2014 Ram PW SLT: Two tone Flame Red & Black
Completed Mods: Ram door sill guards, Front air deflector, WeatherTech slimline window deflectors, DiamondBack HD cover coated w/ Line-X, Mufflex MagnaFlow muffler & Resonator delete, Opti-Coat Pro 2.0, DeeZee tailgate strut, DeeZee ¼" fitted bed mat, Factor-55: FlatLink winch hook/Shorty Strap 3.0/Hitchlink 2.5, Warn Wireless Winch Remote, Locker by-pass, AEM dry filter, Truxedo LED bed lights wired into RamBox Connector, WhiteKnuckle sliders w/ full-length diamond plate coated in Line-X, Purple Cranium rear diff guard, AEV front/rear diff cover, AEV RAI w/ pre-filter, AEV ProCal (Bootleg'd), DOR Steering Box Brace, Phillips Hi intensity LEDs in cargo lamps & back-ups, triple anti-hop shocks, Truxx PW specific front 1.5" level, AAM 4.88's, custom black-out work, Line-X front/rear bumpers & wheel flares, 37" Nitto Ridge Grapplers, Plasti-dip PW wheels Black w/ Gunmetal metalizer, FilterMag kit, AMP Research BedStep
Next Mods: Thuren: {Coils, Track Bar, Boggie Bumps, King 2.5's shocks} , on-board air, HID low CANBUS replacement, LED HI, BD LED fogs
User avatar
adeluca73
2000_Posts
 
Posts: 2020
Joined: Mon May 19, 2014 9:56 pm
Location: The Pentagon, VA

Re: TD's 2014 Red PW Build Thread

Postby israelstanage » Tue Jul 12, 2016 6:43 pm

That looks awesome. Nice work.
israelstanage
50_Posts
 
Posts: 65
Joined: Fri Jul 10, 2015 5:17 pm

Re: TD's 2014 Red PW Build Thread

Postby Will » Tue Jul 12, 2016 7:08 pm

Playing cards stuck between tires and wheels work good also.

Hate to tell ya, but it would look WAY better with tinted front windows and bigger tires.... :)
2010 with 37" hooves, controlled by numerous Thuren parts and Thuren Custom King 2.5's
viewtopic.php?f=13&t=2333

I only do what the majority of the 4 voices in my head tell me to. In most cases, I ignore two of them because one doesn't speak English, and I suspect the other is talking to someone else.
User avatar
Will
2000_Posts
 
Posts: 2440
Joined: Mon Jan 27, 2014 6:16 am

Re: TD's 2014 Red PW Build Thread

Postby olyelr » Tue Jul 12, 2016 7:20 pm

Looking good!
2016 Ram Power Wagon Laramie - Granite Crystal Metallic - Ramboxes
- A virgin, other than White Knuckle sliders... and lots of Fluid Film -
User avatar
olyelr
2000_Posts
 
Posts: 2208
Joined: Sun Dec 07, 2014 8:00 pm
Location: Kewadin, MI

Re: TD's 2014 Red PW Build Thread

Postby adeluca73 » Tue Jul 12, 2016 8:11 pm

Will wrote:Playing cards stuck between tires and wheels work good also.

Hate to tell ya, but it would look WAY better with tinted front windows and bigger tires.... :)


Windows are next. Tires soon. Then shocks & boogies.
2014 Ram PW SLT: Two tone Flame Red & Black
Completed Mods: Ram door sill guards, Front air deflector, WeatherTech slimline window deflectors, DiamondBack HD cover coated w/ Line-X, Mufflex MagnaFlow muffler & Resonator delete, Opti-Coat Pro 2.0, DeeZee tailgate strut, DeeZee ¼" fitted bed mat, Factor-55: FlatLink winch hook/Shorty Strap 3.0/Hitchlink 2.5, Warn Wireless Winch Remote, Locker by-pass, AEM dry filter, Truxedo LED bed lights wired into RamBox Connector, WhiteKnuckle sliders w/ full-length diamond plate coated in Line-X, Purple Cranium rear diff guard, AEV front/rear diff cover, AEV RAI w/ pre-filter, AEV ProCal (Bootleg'd), DOR Steering Box Brace, Phillips Hi intensity LEDs in cargo lamps & back-ups, triple anti-hop shocks, Truxx PW specific front 1.5" level, AAM 4.88's, custom black-out work, Line-X front/rear bumpers & wheel flares, 37" Nitto Ridge Grapplers, Plasti-dip PW wheels Black w/ Gunmetal metalizer, FilterMag kit, AMP Research BedStep
Next Mods: Thuren: {Coils, Track Bar, Boggie Bumps, King 2.5's shocks} , on-board air, HID low CANBUS replacement, LED HI, BD LED fogs
User avatar
adeluca73
2000_Posts
 
Posts: 2020
Joined: Mon May 19, 2014 9:56 pm
Location: The Pentagon, VA

Re: TD's 2014 Red PW Build Thread

Postby Reloaderguy » Tue Jul 12, 2016 9:45 pm

That really looks great. Will it hold up to a tire change?
Best Year Power Wagon
User avatar
Reloaderguy
1000_Posts
 
Posts: 1261
Joined: Tue Feb 09, 2016 7:06 am
Location: Oregon

Re: TD's 2014 Red PW Build Thread

Postby Stickman » Wed Jul 13, 2016 12:10 am

That looks really good, I like that metalizer, makes them pop for sure.
Live To Ride, Ride To Live

2012 Ram Power Wagon - Check out my build thread to see my mods! viewtopic.php?f=13&t=2187
User avatar
Stickman
500_Posts
 
Posts: 832
Joined: Sun Nov 17, 2013 11:02 pm
Location: Wayland, MO

Re: TD's 2014 Red PW Build Thread

Postby adeluca73 » Wed Jul 13, 2016 9:58 pm

Reloaderguy wrote:That really looks great. Will it hold up to a tire change?


The edges may get nicked up, it's easy enough to repair though.
2014 Ram PW SLT: Two tone Flame Red & Black
Completed Mods: Ram door sill guards, Front air deflector, WeatherTech slimline window deflectors, DiamondBack HD cover coated w/ Line-X, Mufflex MagnaFlow muffler & Resonator delete, Opti-Coat Pro 2.0, DeeZee tailgate strut, DeeZee ¼" fitted bed mat, Factor-55: FlatLink winch hook/Shorty Strap 3.0/Hitchlink 2.5, Warn Wireless Winch Remote, Locker by-pass, AEM dry filter, Truxedo LED bed lights wired into RamBox Connector, WhiteKnuckle sliders w/ full-length diamond plate coated in Line-X, Purple Cranium rear diff guard, AEV front/rear diff cover, AEV RAI w/ pre-filter, AEV ProCal (Bootleg'd), DOR Steering Box Brace, Phillips Hi intensity LEDs in cargo lamps & back-ups, triple anti-hop shocks, Truxx PW specific front 1.5" level, AAM 4.88's, custom black-out work, Line-X front/rear bumpers & wheel flares, 37" Nitto Ridge Grapplers, Plasti-dip PW wheels Black w/ Gunmetal metalizer, FilterMag kit, AMP Research BedStep
Next Mods: Thuren: {Coils, Track Bar, Boggie Bumps, King 2.5's shocks} , on-board air, HID low CANBUS replacement, LED HI, BD LED fogs
User avatar
adeluca73
2000_Posts
 
Posts: 2020
Joined: Mon May 19, 2014 9:56 pm
Location: The Pentagon, VA

Re: TD's 2014 Red PW Build Thread

Postby israelstanage » Wed Jul 13, 2016 10:09 pm

Cerakoted wheels on my old truck. As long as the folks changing tires were careful I had no issues. Gravel roads were the only real problem I ran into. If I didn't log so many gravel miles or our back roads dirt/sand/anything else, I would have already done it again.
israelstanage
50_Posts
 
Posts: 65
Joined: Fri Jul 10, 2015 5:17 pm

Re: TD's 2014 Red PW Build Thread

Postby TommyG » Thu Jul 14, 2016 2:53 pm

They look great. Nice work.
2012 Power Wagon
White Knuckle Sliders, myoung locker bypass, more to follow
User avatar
TommyG
50_Posts
 
Posts: 199
Joined: Sun Oct 05, 2014 12:41 pm

Re: TD's 2014 Red PW Build Thread

Postby RamGentry » Thu Jul 14, 2016 6:34 pm

Reloaderguy wrote:That really looks great. Will it hold up to a tire change?


No it wont but its just the lip that will get chewed up. The simple solution is taking an exacto knife to the wheel lip corner and peeling it away and then respray. Easy peasy
If I start listing Mods I would have to change the list daily
My build thread http://forum.powerwagonregistry.org/viewtopic.php?f=13&t=3593
User avatar
RamGentry
250_Posts
 
Posts: 271
Joined: Sun Oct 18, 2015 3:38 pm

Re: TD's 2014 Red PW Build Thread

Postby olyelr » Wed Aug 10, 2016 2:14 pm

Alright, wheres the tire pics?!
2016 Ram Power Wagon Laramie - Granite Crystal Metallic - Ramboxes
- A virgin, other than White Knuckle sliders... and lots of Fluid Film -
User avatar
olyelr
2000_Posts
 
Posts: 2208
Joined: Sun Dec 07, 2014 8:00 pm
Location: Kewadin, MI

Re: TD's 2014 Red PW Build Thread

Postby Jeff50316 » Wed Aug 10, 2016 4:58 pm

olyelr wrote:Alright, wheres the tire pics?!


Yeah right. I'm checking both threads for pics of the new tires
16' Delmoico Red wagon "mods AEM dry air filter, DeeZee tail gate shock, Weather Tech window vents, Flowmaster exhaust, Ruff Country XHD recovery kit, Front window tint, WK Sliders, truexx leaving kit (on order)

Up next diff covers, 4.88 or 5.18 gears, 37in or 35in tires
Jeff50316
 
Posts: 23
Joined: Sun Jul 24, 2016 2:38 pm
Location: Des Moines, IA

Re: TD's 2014 Red PW Build Thread

Postby Reloaderguy » Wed Aug 10, 2016 8:43 pm

Pics or it didn't happen.
Best Year Power Wagon
User avatar
Reloaderguy
1000_Posts
 
Posts: 1261
Joined: Tue Feb 09, 2016 7:06 am
Location: Oregon

Re: TD's 2014 Red PW Build Thread

Postby black_hawk8888 » Thu Aug 11, 2016 11:45 am

The mob is restless. Give the people what they want!
2015 Power Wagon SLT
Stickers removed, Dual Alternators, Thuren PW coils and sway bar with Overland shocks, Magnaflow muffler, resonator deleted, tow mirrors, AMP Powersteps, Carli front diff guard, Husky X-Act mats, spray in bed liner, Undercover tonneau cover
black_hawk8888
50_Posts
 
Posts: 65
Joined: Wed Mar 04, 2015 10:19 pm

Re: TD's 2014 Red PW Build Thread

Postby Colibri » Thu Aug 11, 2016 11:55 am

We're congregating in your thread with pitch forks and torches :evil:
Colibri
1000_Posts
 
Posts: 1134
Joined: Mon Jun 08, 2015 3:44 pm

Tires, it happened, and they're 37's...

Postby adeluca73 » Thu Aug 11, 2016 4:36 pm

Ok, was able to drop the truck off before the movers showed up this morning. 37" Nitto Ridge Grapplers installed on stock PW wheels w/ 1.5" Truxx level, took less than an hr, had them air to -10% max (50psi Max) so about 45psi all around, measured height is right at 36.66", at 50psi they measured around 36.85", EVIC is freaking out of course, no correction available till AEV sells the ProCal or you buy a spendy programmer/tuner, speedo is off by 5mph according to the speedometer app I installed on my iPhone (PW: 35/Ip: 39, PW: 40/Ip: 45, PW: 45/Ip: 50, PW: 50/Ip: 56), tires ride great, way softer than the Duratracs (still had 12/32" left, so weren't as bad as I thought), and they are definitely quieter, did some full lock turns in the parking lot & no rubbing so far, didn't notice much breaking difference, but I drive like a granny, acceleration took a hit even with 4.88's, MPGs down about .5-1mpg, 1oz,1.5oz, 2.5oz, 4oz were the balance weights, they said the stock tires had over 20ozs glued all around the inside wheel. $1179 OTD installed & balanced, no hazard warranty, After 10 miles, couldn't be happier. Oh and bonus, sold my Duratracs in one day on CL for $125 ea :rockon:
Attachments
image.jpeg
No protruding
image.jpeg
No protruding
image.jpeg
Fills it up nicely
image.jpeg
Good stance on 1.5" level, still ½" rake
image.jpeg
EVIC freaking out
2014 Ram PW SLT: Two tone Flame Red & Black
Completed Mods: Ram door sill guards, Front air deflector, WeatherTech slimline window deflectors, DiamondBack HD cover coated w/ Line-X, Mufflex MagnaFlow muffler & Resonator delete, Opti-Coat Pro 2.0, DeeZee tailgate strut, DeeZee ¼" fitted bed mat, Factor-55: FlatLink winch hook/Shorty Strap 3.0/Hitchlink 2.5, Warn Wireless Winch Remote, Locker by-pass, AEM dry filter, Truxedo LED bed lights wired into RamBox Connector, WhiteKnuckle sliders w/ full-length diamond plate coated in Line-X, Purple Cranium rear diff guard, AEV front/rear diff cover, AEV RAI w/ pre-filter, AEV ProCal (Bootleg'd), DOR Steering Box Brace, Phillips Hi intensity LEDs in cargo lamps & back-ups, triple anti-hop shocks, Truxx PW specific front 1.5" level, AAM 4.88's, custom black-out work, Line-X front/rear bumpers & wheel flares, 37" Nitto Ridge Grapplers, Plasti-dip PW wheels Black w/ Gunmetal metalizer, FilterMag kit, AMP Research BedStep
Next Mods: Thuren: {Coils, Track Bar, Boggie Bumps, King 2.5's shocks} , on-board air, HID low CANBUS replacement, LED HI, BD LED fogs
User avatar
adeluca73
2000_Posts
 
Posts: 2020
Joined: Mon May 19, 2014 9:56 pm
Location: The Pentagon, VA

Re: TD's 2014 Red PW Build Thread

Postby olyelr » Fri Aug 12, 2016 7:19 am

Looking goooood!

You got $500 for a set of stock duratracs with 27k miles on them?! You done did good! Were they spent or did they have some usable miles left in them?!
2016 Ram Power Wagon Laramie - Granite Crystal Metallic - Ramboxes
- A virgin, other than White Knuckle sliders... and lots of Fluid Film -
User avatar
olyelr
2000_Posts
 
Posts: 2208
Joined: Sun Dec 07, 2014 8:00 pm
Location: Kewadin, MI

Re: TD's 2014 Red PW Build Thread

Postby olyelr » Fri Aug 12, 2016 7:21 am

Off topic, but whats with the trailers with solar panels in the parking lot in front of you? Portable solar power?
2016 Ram Power Wagon Laramie - Granite Crystal Metallic - Ramboxes
- A virgin, other than White Knuckle sliders... and lots of Fluid Film -
User avatar
olyelr
2000_Posts
 
Posts: 2208
Joined: Sun Dec 07, 2014 8:00 pm
Location: Kewadin, MI

Re: TD's 2014 Red PW Build Thread

Postby RamGentry » Fri Aug 12, 2016 7:32 am

quite a transformation for your truck. Great build so far
If I start listing Mods I would have to change the list daily
My build thread http://forum.powerwagonregistry.org/viewtopic.php?f=13&t=3593
User avatar
RamGentry
250_Posts
 
Posts: 271
Joined: Sun Oct 18, 2015 3:38 pm

Re: Tires, it happened, and they're 37's...

Postby Reloaderguy » Fri Aug 12, 2016 9:16 am

adeluca73 wrote:Ok, was able to drop the truck off before the movers showed up this morning. 37" Nitto Ridge Grapplers installed on stock PW wheels w/ 1.5" Truxx level, took less than an hr, had them air to -10% max (50psi Max) so about 45psi all around, measured height is right at 36.66", at 50psi they measured around 36.85", EVIC is freaking out of course, no correction available till AEV sells the ProCal or you buy a spendy programmer/tuner, speedo is off by 5mph according to the speedometer app I installed on my iPhone (PW: 35/Ip: 39, PW: 40/Ip: 45, PW: 45/Ip: 50, PW: 50/Ip: 56), tires ride great, way softer than the Duratracs (still had 12/32" left, so weren't as bad as I thought), and they are definitely quieter, did some full lock turns in the parking lot & no rubbing so far, didn't notice much breaking difference, but I drive like a granny, acceleration took a hit even with 4.88's, MPGs down about .5-1mpg, 1oz,1.5oz, 2.5oz, 4oz were the balance weights, they said the stock tires had over 20ozs glued all around the inside wheel. $1179 OTD installed & balanced, no hazard warranty, After 10 miles, couldn't be happier. Oh and bonus, sold my Duratracs in one day on CL for $125 ea :rockon:


Your truck looks awesome. Personally I'd skip the Procal and get a Diablo Sport instead. I don't think there is anything you can do about the TPMS...I've given up on mine.
Best Year Power Wagon
User avatar
Reloaderguy
1000_Posts
 
Posts: 1261
Joined: Tue Feb 09, 2016 7:06 am
Location: Oregon

PreviousNext

Return to Member Builds

Who is online

Users browsing this forum: No registered users and 1 guest