2010 Improvements

Start your thread and show everyone your build out.
User avatar
nts007
2000_Posts
2000_Posts
Posts: 2283
Joined: Wed Dec 11, 2013 10:01 pm
Model Year: 2008
Location: Sask, Canada, Earth

Re: 2010 Improvements

Post by nts007 » Fri Jun 16, 2017 11:56 pm

I beat on mine will. Every day. The bars have held. They are pretty strong. I still want to upgrade but not till these ones go
08 ctd--mini max--thuren 3" coils and LT Leaves--4.56 gears and lockers in pw axles--some lights--afe intake system--bd super b turbo--Banks w/m Injection--Dynatrac Balljoints--king 2.5"s--37" Hankook Dynapro MT--DOR Long arms--Custom emf track bar--Manual T-case swap--Full PW Under armor--PSC Hydro Assist and so much more

User avatar
Will
2000_Posts
2000_Posts
Posts: 2515
Joined: Mon Jan 27, 2014 7:16 am
Model Year: 2010

Re: 2010 Improvements

Post by Will » Sat Jun 17, 2017 4:11 am

That's good to know

Sent from my XT1254 using Tapatalk
2010 with 37" hooves, controlled by numerous Thuren parts and Thuren Custom King 2.5's
http://forum.powerwagonregistry.org/vie ... =13&t=2333

I only do what the majority of the 4 voices in my head tell me to. In most cases, I ignore two of them because one doesn't speak English, and I suspect the other is talking to someone else.

User avatar
Will
2000_Posts
2000_Posts
Posts: 2515
Joined: Mon Jan 27, 2014 7:16 am
Model Year: 2010

Re: 2010 Improvements

Post by Will » Sun Jul 16, 2017 5:42 pm

Finally changed the steering out. Broke off the stud in the pitman arm, drilled it out, little heat and persuasion, self alignment, drives like a brand new one now. ImageImageImageImageImage
2010 with 37" hooves, controlled by numerous Thuren parts and Thuren Custom King 2.5's
http://forum.powerwagonregistry.org/vie ... =13&t=2333

I only do what the majority of the 4 voices in my head tell me to. In most cases, I ignore two of them because one doesn't speak English, and I suspect the other is talking to someone else.

User avatar
Will
2000_Posts
2000_Posts
Posts: 2515
Joined: Mon Jan 27, 2014 7:16 am
Model Year: 2010

Re: 2010 Improvements

Post by Will » Sun Jul 16, 2017 6:58 pm

Now if I could figure out the abs light.... ImageImage
2010 with 37" hooves, controlled by numerous Thuren parts and Thuren Custom King 2.5's
http://forum.powerwagonregistry.org/vie ... =13&t=2333

I only do what the majority of the 4 voices in my head tell me to. In most cases, I ignore two of them because one doesn't speak English, and I suspect the other is talking to someone else.

User avatar
Will
2000_Posts
2000_Posts
Posts: 2515
Joined: Mon Jan 27, 2014 7:16 am
Model Year: 2010

Re: 2010 Improvements

Post by Will » Fri Aug 04, 2017 9:48 pm

Well shit.... Went to pull in 4wd and shifter is loose as a swinging dick. Raining so I'll get under tomorrow morning and figure out what came apart. Something in the linkage, can slap it around from 4lo to 4hi with zero resistance.

Sent from my XT1254 using Tapatalk
2010 with 37" hooves, controlled by numerous Thuren parts and Thuren Custom King 2.5's
http://forum.powerwagonregistry.org/vie ... =13&t=2333

I only do what the majority of the 4 voices in my head tell me to. In most cases, I ignore two of them because one doesn't speak English, and I suspect the other is talking to someone else.

Colibri
1000_Posts
1000_Posts
Posts: 1541
Joined: Mon Jun 08, 2015 5:44 pm
Model Year: 2009

Re: 2010 Improvements

Post by Colibri » Fri Aug 04, 2017 10:47 pm

Central Texas and Houston area
2009 5.7 auto quadcab
Carli 3” coils deaver leafs 3” kings with 4 tube bypass rear and fr/rr hydro bumps
Howe steering pump and gear with hydraulic ram assist
Custom tube bumpers and white knuckle sliders
Creative fab trussed axle. rem polished and cryoed 5.13 gears with arb lockers fr/rr
Sharadon stage 2 545rfe with 3000 stall edge converter
Lots of other stuff lol

User avatar
Will
2000_Posts
2000_Posts
Posts: 2515
Joined: Mon Jan 27, 2014 7:16 am
Model Year: 2010

Re: 2010 Improvements

Post by Will » Sat Aug 05, 2017 9:04 am

Yep. This is a POS...one bushing gone, almost lost the linkage. Image
2010 with 37" hooves, controlled by numerous Thuren parts and Thuren Custom King 2.5's
http://forum.powerwagonregistry.org/vie ... =13&t=2333

I only do what the majority of the 4 voices in my head tell me to. In most cases, I ignore two of them because one doesn't speak English, and I suspect the other is talking to someone else.

User avatar
Will
2000_Posts
2000_Posts
Posts: 2515
Joined: Mon Jan 27, 2014 7:16 am
Model Year: 2010

Re: 2010 Improvements

Post by Will » Mon Aug 07, 2017 6:08 pm

Colibri wrote:http://forum.powerwagonregistry.org/vie ... f=2&t=4980

Never worry again will
Ordered these parts today. Thanks man. That stock bushing bullshit​is for the birds. I tried because local auto parts store had the bushings but never could get one in and messed it all up trying.
2010 with 37" hooves, controlled by numerous Thuren parts and Thuren Custom King 2.5's
http://forum.powerwagonregistry.org/vie ... =13&t=2333

I only do what the majority of the 4 voices in my head tell me to. In most cases, I ignore two of them because one doesn't speak English, and I suspect the other is talking to someone else.

User avatar
Will
2000_Posts
2000_Posts
Posts: 2515
Joined: Mon Jan 27, 2014 7:16 am
Model Year: 2010

Re: 2010 Improvements

Post by Will » Sat Aug 12, 2017 9:35 am

Son of a bitch. I can't believe how easy it is to shift the transfer case now! 2hi, 4hi, 4lo with two fingers. Thanks Colibri !!

Image

Sent from my XT1254 using Tapatalk
2010 with 37" hooves, controlled by numerous Thuren parts and Thuren Custom King 2.5's
http://forum.powerwagonregistry.org/vie ... =13&t=2333

I only do what the majority of the 4 voices in my head tell me to. In most cases, I ignore two of them because one doesn't speak English, and I suspect the other is talking to someone else.

User avatar
olyelr
2000_Posts
2000_Posts
Posts: 3080
Joined: Sun Dec 07, 2014 9:00 pm
Model Year: 2016
Location: Kewadin, MI

Re: 2010 Improvements

Post by olyelr » Thu Dec 21, 2017 10:42 pm

olyelr wrote:
Tue Jun 06, 2017 2:14 pm
Just had to check back in for a looksie at that there two tone black and grey rig tuckin' some 37's... I like!

Whats happening, Will, where ya been? Building a house or garage? I miss seeing your humor on the forums.


^^^^^^^^ this :D





How's the steering holding up?
2016 Ram Power Wagon Laramie - Granite Crystal Metallic - Ramboxes :patriot:

gun45boat
500_Posts
500_Posts
Posts: 751
Joined: Wed Apr 17, 2013 8:02 pm

Re: 2010 Improvements

Post by gun45boat » Sun Dec 24, 2017 9:09 am

That is AWESOME!!!!!! can I make a quick possible recommendation If it is even possible.. Is there a way to install that rod on the other side of the shifter levers? I am saying this out of experience, but when I blew a front Driveshaft rear assembly one day on the trail, it took out my entire shifter assembly, bent the levers, and was soo close to taking out my T-case that that picture shows. When it happened I thought to myself "thank god that lever was a cheap metal/plastic assembly" and it was able to "give" With the pics I see it is VERY close to the D-shaft and when it pops, it will not "give' as well as the factory unit. Is there a way to put it on the other side? Jus thinking outside the box for when you are balls deep on the throttle, bouncing off a rock, and your D-shaft decides to shatter;)

gun45boat
500_Posts
500_Posts
Posts: 751
Joined: Wed Apr 17, 2013 8:02 pm

Re: 2010 Improvements

Post by gun45boat » Sun Dec 24, 2017 9:11 am

if its possible to put on the other side for more clearance away from the D-shaft,,,,,, I might just upgrade to this bad ass shifter rod....

Great find Colibri!!!!!!!!!!

Colibri
1000_Posts
1000_Posts
Posts: 1541
Joined: Mon Jun 08, 2015 5:44 pm
Model Year: 2009

Re: 2010 Improvements

Post by Colibri » Sun Dec 24, 2017 10:39 am

I think it would fit on the other side probably, I welded in a front driveshaft safety hoop on my truck to avoid that very problem though.
Central Texas and Houston area
2009 5.7 auto quadcab
Carli 3” coils deaver leafs 3” kings with 4 tube bypass rear and fr/rr hydro bumps
Howe steering pump and gear with hydraulic ram assist
Custom tube bumpers and white knuckle sliders
Creative fab trussed axle. rem polished and cryoed 5.13 gears with arb lockers fr/rr
Sharadon stage 2 545rfe with 3000 stall edge converter
Lots of other stuff lol

User avatar
Will
2000_Posts
2000_Posts
Posts: 2515
Joined: Mon Jan 27, 2014 7:16 am
Model Year: 2010

Re: 2010 Improvements

Post by Will » Thu Sep 27, 2018 9:24 am

Just posted this in marketplace. FORSALE $17,000.00

Warn wireless winch remote
Amsteel synthetic winch rope
Hawk SD brake pads (went through set, now running EBC Yellowstuff)
Kenwood full speaker replacement
Brake and backup lights on switches
myoung smartbar bypass kit
Thuren Control Arms
Thuren 3" coils
Thuren Trac Bar
Thuren rear shackles
37x12.5 Hankook Dynapro MT's
El cheapo LED reverse light
Diablo Intune w/Hemifever Tune
Amsoil front and rear differential oil with the GP101 Filtermags
Thuren Custom King 2.5" Stage 3 up front with Boogie Rated Bump Stops, Stage 2 shorties with piggybacks in the rear (replaced Rancho 9000's)
Spicer axle U Joints
Dynatrac HD ball joints
2010 with 37" hooves, controlled by numerous Thuren parts and Thuren Custom King 2.5's
http://forum.powerwagonregistry.org/vie ... =13&t=2333

I only do what the majority of the 4 voices in my head tell me to. In most cases, I ignore two of them because one doesn't speak English, and I suspect the other is talking to someone else.

Post Reply