Carl's 2012 PW "ScottWagon1"
- verdesardog
- 500_Posts
- Posts: 989
- Joined: Thu May 31, 2012 11:24 am
- Model Year: 2006
Re: Carl's 2012 PW
what do you need center caps for? IMHO they're just bling....I think these trucks looks better without them anyway.
2006 Big Horn 2500 Ram CTD. IMAGINE ALL THE PEOPLE LIVING LIFE IN PEACE
-
- 250_Posts
- Posts: 262
- Joined: Sat Jul 20, 2013 9:50 pm
- Location: Cheyenne,Wy
Re: Carl's 2012 PW
Ya it was $120 for four. Side note went hunting this morning and mpg said12.7!
Carl Scott: Black 2012 PW 35/12.50/17 Nitto Mud Grappler. Thuren control arms. Carli 3" Hmei coils. Carli Track bar. Magnaflow dual inlet/single outlet muffler. Front window tint. Clear Bra. Cold air intake. Hard wired lockers. All options but leather and dual climate
-
- 250_Posts
- Posts: 262
- Joined: Sat Jul 20, 2013 9:50 pm
- Location: Cheyenne,Wy
Re: Carl's 2012 PW
Did a cold air intake today for $60!
Carl Scott: Black 2012 PW 35/12.50/17 Nitto Mud Grappler. Thuren control arms. Carli 3" Hmei coils. Carli Track bar. Magnaflow dual inlet/single outlet muffler. Front window tint. Clear Bra. Cold air intake. Hard wired lockers. All options but leather and dual climate
-
- 250_Posts
- Posts: 262
- Joined: Sat Jul 20, 2013 9:50 pm
- Location: Cheyenne,Wy
Re: Carl's 2012 PW "ScottWagon1"
Carl Scott: Black 2012 PW 35/12.50/17 Nitto Mud Grappler. Thuren control arms. Carli 3" Hmei coils. Carli Track bar. Magnaflow dual inlet/single outlet muffler. Front window tint. Clear Bra. Cold air intake. Hard wired lockers. All options but leather and dual climate
Re: Carl's 2012 PW "ScottWagon1"
Sweet!
Sent from my SCH-I535 using Tapatalk
Sent from my SCH-I535 using Tapatalk
2014 Ram 1500 4x4 Outdoorsman
Retro Shop Custom FXR Projectors | Diablo inTune | Moe's 87mm TB | BT Oil Catch Can
Toyo A/T II Tires | Bilstein 5100 Front and Rear Shocks | Movotech UCA's
AirLift 100 Air Bags | Bestop PowerBoards | RollBak Bed Cover | BedRug
-
- 250_Posts
- Posts: 262
- Joined: Sat Jul 20, 2013 9:50 pm
- Location: Cheyenne,Wy
Re: Carl's 2012 PW "ScottWagon1"
Thuren control arms, Carli springs and track bar installed and loving it!
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Carl Scott: Black 2012 PW 35/12.50/17 Nitto Mud Grappler. Thuren control arms. Carli 3" Hmei coils. Carli Track bar. Magnaflow dual inlet/single outlet muffler. Front window tint. Clear Bra. Cold air intake. Hard wired lockers. All options but leather and dual climate
-
- 250_Posts
- Posts: 262
- Joined: Sat Jul 20, 2013 9:50 pm
- Location: Cheyenne,Wy
Re: Carl's 2012 PW "ScottWagon1"
Thuren control arms, Carli springs and track bar installed and loving it!
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Carl Scott: Black 2012 PW 35/12.50/17 Nitto Mud Grappler. Thuren control arms. Carli 3" Hmei coils. Carli Track bar. Magnaflow dual inlet/single outlet muffler. Front window tint. Clear Bra. Cold air intake. Hard wired lockers. All options but leather and dual climate
- Stickman
- 500_Posts
- Posts: 829
- Joined: Mon Nov 18, 2013 12:02 am
- Model Year: 2012
- Location: Wayland, MO
Re: Carl's 2012 PW
Did you have a leveling kit or anything installed when you put the 35" Nittos on the first time? And did they rub other than the rears on the inner fender as you mentioned? I'm thinking of getting the same tires and leaving the stock rims for now also and doing a 2" Mopar level for now to compensate and was wondering if I would have to do any trimming or clearance anything. Also how tucked are those tires on the stock rims? About the same as stock? My rockers are already chipped to hell from the stock tires and rims. Truck looks good man! Same exact thing that's sitting in my driveway so you're doing all the changes for me so I can see what mine will look like, lol.
Live To Ride, Ride To Live
2012 Ram Power Wagon - Check out my build thread to see my mods! http://forum.powerwagonregistry.org/vie ... =13&t=2187
2012 Ram Power Wagon - Check out my build thread to see my mods! http://forum.powerwagonregistry.org/vie ... =13&t=2187
-
- 250_Posts
- Posts: 262
- Joined: Sat Jul 20, 2013 9:50 pm
- Location: Cheyenne,Wy
Re: Carl's 2012 PW
Did have the 35"s on with it all stock and on stock wheels. The only rubbing I had was on the control arms at full turn left and right. No rubbing on the front at full compression either. On the back the tires will rub the inner fender will liner at compression but it's nothing to worry about. No trimming anything though. Personally I wouldn't spend money on the mopar leveling kit at all. You can fit the tires bone stock. Save the money up for the right stuff. Like I said the rubbing is at the control arms and leveling kit isn't going to help that at all, you will need new control arms. As for the chipped rockers, I feel ya. Buy mud flaps period, it's the only sure way to stop it.Stickman wrote:Did you have a leveling kit or anything installed when you put the 35" Nittos on the first time? And did they rub other than the rears on the inner fender as you mentioned? I'm thinking of getting the same tires and leaving the stock rims for now also and doing a 2" Mopar level for now to compensate and was wondering if I would have to do any trimming or clearance anything. Also how tucked are those tires on the stock rims? About the same as stock? My rockers are already chipped to hell from the stock tires and rims. Truck looks good man! Same exact thing that's sitting in my driveway so you're doing all the changes for me so I can see what mine will look like, lol.
Carl Scott: Black 2012 PW 35/12.50/17 Nitto Mud Grappler. Thuren control arms. Carli 3" Hmei coils. Carli Track bar. Magnaflow dual inlet/single outlet muffler. Front window tint. Clear Bra. Cold air intake. Hard wired lockers. All options but leather and dual climate
- Stickman
- 500_Posts
- Posts: 829
- Joined: Mon Nov 18, 2013 12:02 am
- Model Year: 2012
- Location: Wayland, MO
Re: Carl's 2012 PW
Thanks! I was just wanting the leveling kit just to level it for looks when it's unloaded. And I may be getting offset rims so I may not have to worry about the control arms but I'm not getting my hopes up. I'm also planning on having my rockers Line X'd sometime, might have to do that first. I'm not a fan of mud flaps, but I may get some. Also getting Bushwhacker flares like 2wagons has, sometime. Gunna be a lot of money for so little.
Live To Ride, Ride To Live
2012 Ram Power Wagon - Check out my build thread to see my mods! http://forum.powerwagonregistry.org/vie ... =13&t=2187
2012 Ram Power Wagon - Check out my build thread to see my mods! http://forum.powerwagonregistry.org/vie ... =13&t=2187
-
- 2000_Posts
- Posts: 2970
- Joined: Wed Jan 16, 2013 6:55 pm
- Location: ontario canada
Re: Carl's 2012 PW "ScottWagon1"
Love those bushwackers a bed lined them myself and I thought it didn't work and was all upset until now they still look pretty good and haven't held any scratches ! The Wackers really helped with stone chips man I hated those bfgs felt like every pebble on the road was coming at my rocker or at the bottom of my mirrors lol
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
if guns kill people
pencils mispell words
cars make people drive drunk
and spoons made rosie o'donnel fat
"The one thing you realize when you aquire your trade standard is you realistically don't know Anything"
pencils mispell words
cars make people drive drunk
and spoons made rosie o'donnel fat
"The one thing you realize when you aquire your trade standard is you realistically don't know Anything"