Board index General Member Builds

Start your thread and show everyone your build out.

Re: 04Ram2500Hemi's 2012 Power Wagon

Postby gun45boat » Fri Dec 18, 2015 2:36 pm

Sorry boys,,,, I like my flip flops in Feb.... I love the heat,,,,love to sweat (and in Florida Humidity YOU SWEAT A LOT) Like going to a sauna everyday,,, nice and cleansed and shit:) WInters average highs in the mid 70's and nights in the 50's.. Surfing year round, and ALWAYS needing to ice down the cooler:) PLUS,,,, Girls are always in their bikini's!!!!!! Need I say more:):):):):):)

I did get to ride on the back of a snowmobile in Silverton Co after the Moab run,,, FUCK ME RUNNING!!! I think I went 0-60 in like 3 seconds flat (had my eyes closed most the time) UP THE SIDE OF A FUCKING MOUNTAIN!!!!!! had to change out my thong after that run;) a 2 stroke engine with a turbo that turned out 12K rpm (felt like it anyways) Was a rush!!!!!!
gun45boat
500_Posts
 
Posts: 696
Joined: Wed Apr 17, 2013 6:02 pm

Re: 04Ram2500Hemi's 2012 Power Wagon

Postby 04Ram2500Hemi » Fri Dec 18, 2015 2:53 pm

Mule wrote:Get the right toys, you'll be looking forward to winter all summer long...
ImageImage


LOL- you sound like my brother. I'm more of a summer time kind of guy. Once hunting season and Christmas are done, I'm ready for sunshine and water activities.
Attachments
IMG_0621.jpg
IMG_0606.jpg
IMG_1111.jpg
2012 Ram Power Wagon: viewtopic.php?f=13&t=107
Truxedo Deuce Bed Cover with Bed Lights, Black Line-X Rocker Panel, Custom Built Rock Rails Sprayed with Line-X, Front & Rear Bumper and Grill sprayed with Line-X, Husky Mud Flaps, Husky Floor Mats, Four VisionX Xmitter Low Pro Prime XP LED Light Bars Behind the Grill, LED Lights Mounted in the Rear Bumper, Heated Seats, Interior LED Lighting, NAV-TV, Camera Mounted in Front Grill, Custom Headache Rack, AEV Raised Air Intake, AEV Salta HD Wheels in Onyx, 285/75/17 Toyo A/T II Tires
04Ram2500Hemi
2000_Posts
 
Posts: 2040
Joined: Thu May 31, 2012 10:19 am
Location: Missoula, MT

Re: 04Ram2500Hemi's 2012 Power Wagon

Postby gun45boat » Fri Dec 18, 2015 4:02 pm

Touche' :)
gun45boat
500_Posts
 
Posts: 696
Joined: Wed Apr 17, 2013 6:02 pm

Re: 04Ram2500Hemi's 2012 Power Wagon

Postby 2wagons1driveway » Sat Dec 19, 2015 9:58 am

Haha I agree about the toys they make winter much more enjoyable mule! It's alittle chilly here as it's beginning to look more like winter in edmonton
ImageUploadedByTapatalk1450540676.504872.jpg



Sent from Canada
if guns kill people
pencils mispell words
cars make people drive drunk
and spoons made rosie o'donnel fat

"The one thing you realize when you aquire your trade standard is you realistically don't know Anything"
2wagons1driveway
2000_Posts
 
Posts: 2918
Joined: Wed Jan 16, 2013 5:55 pm
Location: ontario canada

Re: 04Ram2500Hemi's 2012 Power Wagon

Postby RamGentry » Sat Dec 19, 2015 6:13 pm

MinneSNOWta is snowless and it actually dissapoints me. First winter with the PW
If I start listing Mods I would have to change the list daily
My build thread http://forum.powerwagonregistry.org/viewtopic.php?f=13&t=3593
User avatar
RamGentry
250_Posts
 
Posts: 272
Joined: Sun Oct 18, 2015 3:38 pm

Re: 04Ram2500Hemi's 2012 Power Wagon

Postby gun45boat » Sun Dec 27, 2015 12:12 pm

Yep.... Vagina just got sore again!!!!! Stop posting pics of Snow:):):):)
gun45boat
500_Posts
 
Posts: 696
Joined: Wed Apr 17, 2013 6:02 pm

Re: 04Ram2500Hemi's 2012 Power Wagon

Postby 04Ram2500Hemi » Mon Apr 18, 2016 9:03 am

Finally had a sunny Spring day so I decided to go for a drive. While on my drive I saw a hillside that made me think I should play with the sway bar. I went up the hillside as far as my pucker factor would allow.
Attachments
Flex1.jpg
Flex2.jpg
Scenic.jpg
2012 Ram Power Wagon: viewtopic.php?f=13&t=107
Truxedo Deuce Bed Cover with Bed Lights, Black Line-X Rocker Panel, Custom Built Rock Rails Sprayed with Line-X, Front & Rear Bumper and Grill sprayed with Line-X, Husky Mud Flaps, Husky Floor Mats, Four VisionX Xmitter Low Pro Prime XP LED Light Bars Behind the Grill, LED Lights Mounted in the Rear Bumper, Heated Seats, Interior LED Lighting, NAV-TV, Camera Mounted in Front Grill, Custom Headache Rack, AEV Raised Air Intake, AEV Salta HD Wheels in Onyx, 285/75/17 Toyo A/T II Tires
04Ram2500Hemi
2000_Posts
 
Posts: 2040
Joined: Thu May 31, 2012 10:19 am
Location: Missoula, MT

Re: 04Ram2500Hemi's 2012 Power Wagon

Postby adeluca73 » Mon Apr 18, 2016 6:45 pm

:D
04Ram2500Hemi wrote:Finally had a sunny Spring day so I decided to go for a drive. While on my drive I saw a hillside that made me think I should play with the sway bar. I went up the hillside as far as my pucker factor would allow.


Did you remove, or replace w/ a manual disconnect, or just OFO... :D
Last edited by adeluca73 on Mon Apr 18, 2016 8:38 pm, edited 1 time in total.
2014 Ram PW SLT: Two tone Flame Red & Black
Completed Mods: Ram door sill guards, Front air deflector, WeatherTech slimline window deflectors, DiamondBack HD cover coated w/ Line-X, Mufflex MagnaFlow muffler & Resonator delete, Opti-Coat Pro 2.0, DeeZee tailgate strut, DeeZee ¼" fitted bed mat, Factor-55: FlatLink winch hook/Shorty Strap 3.0/Hitchlink 2.5, Warn Wireless Winch Remote, Locker by-pass, AEM dry filter, Truxedo LED bed lights wired into RamBox Connector, WhiteKnuckle sliders w/ full-length diamond plate coated in Line-X, Purple Cranium rear diff guard, AEV front/rear diff cover, AEV RAI w/ pre-filter, AEV ProCal (Bootleg'd), DOR Steering Box Brace, Phillips Hi intensity LEDs in cargo lamps & back-ups, triple anti-hop shocks, Truxx PW specific front 1.5" level, AAM 4.88's, custom black-out work, Line-X front/rear bumpers & wheel flares, 37" Nitto Ridge Grapplers, Plasti-dip PW wheels Black w/ Gunmetal metalizer, FilterMag kit, AMP Research BedStep
Next Mods: Thuren: {Coils, Track Bar, Boggie Bumps, King 2.5's shocks} , on-board air, HID low CANBUS replacement, LED HI, BD LED fogs
User avatar
adeluca73
2000_Posts
 
Posts: 2020
Joined: Mon May 19, 2014 9:56 pm
Location: The Pentagon, VA

Re: 04Ram2500Hemi's 2012 Power Wagon

Postby 04Ram2500Hemi » Mon Apr 18, 2016 8:26 pm

adeluca73 wrote:
04Ram2500Hemi wrote:Finally had a sunny Spring day so I decided to go for a drive. While on my drive I saw a hillside that made me think I should play with the sway bar. I went up the hillside as far as my pucker factor would allow.


Did you remove or replace w/ a manual disconnect just OFO... :D


Honestly I've never played much with the disconnecting sway bar and flexing the truck, and the hillside called me. I realized quickly that this truck will do more than I'm comfortable with. I need to find a good ditch sometime to play with the factory disconnecting away bar more. I bought the Power Wagon more for the lockers and winch- the sway bar was more of a novelty to be honest.
2012 Ram Power Wagon: viewtopic.php?f=13&t=107
Truxedo Deuce Bed Cover with Bed Lights, Black Line-X Rocker Panel, Custom Built Rock Rails Sprayed with Line-X, Front & Rear Bumper and Grill sprayed with Line-X, Husky Mud Flaps, Husky Floor Mats, Four VisionX Xmitter Low Pro Prime XP LED Light Bars Behind the Grill, LED Lights Mounted in the Rear Bumper, Heated Seats, Interior LED Lighting, NAV-TV, Camera Mounted in Front Grill, Custom Headache Rack, AEV Raised Air Intake, AEV Salta HD Wheels in Onyx, 285/75/17 Toyo A/T II Tires
04Ram2500Hemi
2000_Posts
 
Posts: 2040
Joined: Thu May 31, 2012 10:19 am
Location: Missoula, MT

Re: 04Ram2500Hemi's 2012 Power Wagon

Postby Will » Tue Apr 19, 2016 5:11 am

04Ram2500Hemi wrote:
adeluca73 wrote:
04Ram2500Hemi wrote:Finally had a sunny Spring day so I decided to go for a drive. While on my drive I saw a hillside that made me think I should play with the sway bar. I went up the hillside as far as my pucker factor would allow.


Did you remove or replace w/ a manual disconnect just OFO... :D


Honestly I've never played much with the disconnecting sway bar and flexing the truck, and the hillside called me. I realized quickly that this truck will do more than I'm comfortable with. I need to find a good ditch sometime to play with the factory disconnecting away bar more. I bought the Power Wagon more for the lockers and winch- the sway bar was more of a novelty to be honest.


With it disconnected, lockers locked and if the tires are on anything solid, point it where you want it to go and it will go, dragging bumpers, rocker panels, whatever :lol: :lol:
2010 with 37" hooves, controlled by numerous Thuren parts and Thuren Custom King 2.5's
viewtopic.php?f=13&t=2333

I only do what the majority of the 4 voices in my head tell me to. In most cases, I ignore two of them because one doesn't speak English, and I suspect the other is talking to someone else.
User avatar
Will
2000_Posts
 
Posts: 2460
Joined: Mon Jan 27, 2014 6:16 am

Re: 04Ram2500Hemi's 2012 Power Wagon

Postby 04Ram2500Hemi » Tue Apr 19, 2016 7:23 pm

Will wrote:
With it disconnected, lockers locked and if the tires are on anything solid, point it where you want it to go and it will go, dragging bumpers, rocker panels, whatever :lol: :lol:


Sometimes you scare me Will... :lol:
2012 Ram Power Wagon: viewtopic.php?f=13&t=107
Truxedo Deuce Bed Cover with Bed Lights, Black Line-X Rocker Panel, Custom Built Rock Rails Sprayed with Line-X, Front & Rear Bumper and Grill sprayed with Line-X, Husky Mud Flaps, Husky Floor Mats, Four VisionX Xmitter Low Pro Prime XP LED Light Bars Behind the Grill, LED Lights Mounted in the Rear Bumper, Heated Seats, Interior LED Lighting, NAV-TV, Camera Mounted in Front Grill, Custom Headache Rack, AEV Raised Air Intake, AEV Salta HD Wheels in Onyx, 285/75/17 Toyo A/T II Tires
04Ram2500Hemi
2000_Posts
 
Posts: 2040
Joined: Thu May 31, 2012 10:19 am
Location: Missoula, MT

Re: 04Ram2500Hemi's 2012 Power Wagon

Postby RAM4ROKS » Mon May 02, 2016 8:07 pm

Will wrote:With it disconnected, lockers locked and if the tires are on anything solid, point it where you want it to go and it will go, dragging bumpers, rocker panels, whatever :lol: :lol:


Quoted for truth, LOL!
:rockon:
User avatar
RAM4ROKS
500_Posts
 
Posts: 978
Joined: Wed Jan 16, 2013 4:48 pm

Re: 04Ram2500Hemi's 2012 Power Wagon

Postby 04Ram2500Hemi » Mon May 16, 2016 7:11 am

Friday the 13th isn't always a bad day. I had AEV's Salta HD's in Onyx put on the truck and I'm really happy with how they look.
Attachments
IMG_2184.JPG
IMG_2275.JPG
IMG_2416.JPG
IMG_2417.JPG
IMG_2420.JPG
IMG_2415.JPG
2012 Ram Power Wagon: viewtopic.php?f=13&t=107
Truxedo Deuce Bed Cover with Bed Lights, Black Line-X Rocker Panel, Custom Built Rock Rails Sprayed with Line-X, Front & Rear Bumper and Grill sprayed with Line-X, Husky Mud Flaps, Husky Floor Mats, Four VisionX Xmitter Low Pro Prime XP LED Light Bars Behind the Grill, LED Lights Mounted in the Rear Bumper, Heated Seats, Interior LED Lighting, NAV-TV, Camera Mounted in Front Grill, Custom Headache Rack, AEV Raised Air Intake, AEV Salta HD Wheels in Onyx, 285/75/17 Toyo A/T II Tires
04Ram2500Hemi
2000_Posts
 
Posts: 2040
Joined: Thu May 31, 2012 10:19 am
Location: Missoula, MT

Re: 04Ram2500Hemi's 2012 Power Wagon

Postby stubiePW » Mon May 16, 2016 9:04 am

Looks really good
User avatar
stubiePW
500_Posts
 
Posts: 575
Joined: Mon Nov 12, 2012 6:45 pm

Re: 04Ram2500Hemi's 2012 Power Wagon

Postby adeluca73 » Mon May 16, 2016 9:55 am

Like them, a lot--but are they as strong & functional as the stock PW wheels?

I've been toiling over those same AEV wheels, the dark slate Hutchinson bead locks, buying a set of the '17 PW wheels, or having my PW wheels powder coated black w/ the center Ram head in red, sort of like Stickman did. But the quote I got to powder coat, un mount /remount & balance is way more than just buying new wheels.
2014 Ram PW SLT: Two tone Flame Red & Black
Completed Mods: Ram door sill guards, Front air deflector, WeatherTech slimline window deflectors, DiamondBack HD cover coated w/ Line-X, Mufflex MagnaFlow muffler & Resonator delete, Opti-Coat Pro 2.0, DeeZee tailgate strut, DeeZee ¼" fitted bed mat, Factor-55: FlatLink winch hook/Shorty Strap 3.0/Hitchlink 2.5, Warn Wireless Winch Remote, Locker by-pass, AEM dry filter, Truxedo LED bed lights wired into RamBox Connector, WhiteKnuckle sliders w/ full-length diamond plate coated in Line-X, Purple Cranium rear diff guard, AEV front/rear diff cover, AEV RAI w/ pre-filter, AEV ProCal (Bootleg'd), DOR Steering Box Brace, Phillips Hi intensity LEDs in cargo lamps & back-ups, triple anti-hop shocks, Truxx PW specific front 1.5" level, AAM 4.88's, custom black-out work, Line-X front/rear bumpers & wheel flares, 37" Nitto Ridge Grapplers, Plasti-dip PW wheels Black w/ Gunmetal metalizer, FilterMag kit, AMP Research BedStep
Next Mods: Thuren: {Coils, Track Bar, Boggie Bumps, King 2.5's shocks} , on-board air, HID low CANBUS replacement, LED HI, BD LED fogs
User avatar
adeluca73
2000_Posts
 
Posts: 2020
Joined: Mon May 19, 2014 9:56 pm
Location: The Pentagon, VA

Re: 04Ram2500Hemi's 2012 Power Wagon

Postby 04Ram2500Hemi » Mon May 16, 2016 10:00 am

adeluca73 wrote:Like them, a lot--but are they as strong & functional as the stock PW wheels?

I've been toiling over those same AEV wheels, the dark slate Hutchinson bead locks, buying a set of the '17 PW wheels, or having my PW wheels powder coated black w/ the center Ram head in red, sort of like Stickman did. But the quote I got to powder coat, un mount /remount & balance is way more than just buying new wheels.


I'm going to guess they are just as strong as the Power Wagon wheel. I know they don't have the inner lip like the Power Wagon Wheel, but after looking at my stock wheel it's not that much of a lip to be honest. Also, I don't ever air down enough to where it's going to be a concern for me. I guess it all comes down to what you're going to be doing with your truck. For me, it kind of finishes off the look I'm going for.
2012 Ram Power Wagon: viewtopic.php?f=13&t=107
Truxedo Deuce Bed Cover with Bed Lights, Black Line-X Rocker Panel, Custom Built Rock Rails Sprayed with Line-X, Front & Rear Bumper and Grill sprayed with Line-X, Husky Mud Flaps, Husky Floor Mats, Four VisionX Xmitter Low Pro Prime XP LED Light Bars Behind the Grill, LED Lights Mounted in the Rear Bumper, Heated Seats, Interior LED Lighting, NAV-TV, Camera Mounted in Front Grill, Custom Headache Rack, AEV Raised Air Intake, AEV Salta HD Wheels in Onyx, 285/75/17 Toyo A/T II Tires
04Ram2500Hemi
2000_Posts
 
Posts: 2040
Joined: Thu May 31, 2012 10:19 am
Location: Missoula, MT

Re: 04Ram2500Hemi's 2012 Power Wagon

Postby Colibri » Mon May 16, 2016 1:36 pm

Looks fantastic sir!
Colibri
1000_Posts
 
Posts: 1196
Joined: Mon Jun 08, 2015 3:44 pm

Re: 04Ram2500Hemi's 2012 Power Wagon

Postby Reloaderguy » Mon May 16, 2016 2:13 pm

04Ram2500Hemi wrote:
adeluca73 wrote:Like them, a lot--but are they as strong & functional as the stock PW wheels?

I've been toiling over those same AEV wheels, the dark slate Hutchinson bead locks, buying a set of the '17 PW wheels, or having my PW wheels powder coated black w/ the center Ram head in red, sort of like Stickman did. But the quote I got to powder coat, un mount /remount & balance is way more than just buying new wheels.


I'm going to guess they are just as strong as the Power Wagon wheel. I know they don't have the inner lip like the Power Wagon Wheel, but after looking at my stock wheel it's not that much of a lip to be honest. Also, I don't ever air down enough to where it's going to be a concern for me. I guess it all comes down to what you're going to be doing with your truck. For me, it kind of finishes off the look I'm going for.


I thought I read they are cast? They look great!
Best Year Power Wagon
User avatar
Reloaderguy
1000_Posts
 
Posts: 1300
Joined: Tue Feb 09, 2016 7:06 am
Location: Oregon

Re: 04Ram2500Hemi's 2012 Power Wagon

Postby 04Ram2500Hemi » Mon May 16, 2016 2:25 pm

AEV Wheel Specs: http://www.aev-conversions.com/shop/veh ... a-hd-wheel

Key Features:
•A356/T6 cast aluminum construction
•3,650 lbs. load rating – tested w/ a 40” tire
•Compatible with Tire Pressure Monitoring System (TPMS)
•AEV's Signature recessed valve stems for added protection
•Tested to stringent SAE J2530 standards
•Molded AEV Center Cap included
•Lifetime structural warranty
2012 Ram Power Wagon: viewtopic.php?f=13&t=107
Truxedo Deuce Bed Cover with Bed Lights, Black Line-X Rocker Panel, Custom Built Rock Rails Sprayed with Line-X, Front & Rear Bumper and Grill sprayed with Line-X, Husky Mud Flaps, Husky Floor Mats, Four VisionX Xmitter Low Pro Prime XP LED Light Bars Behind the Grill, LED Lights Mounted in the Rear Bumper, Heated Seats, Interior LED Lighting, NAV-TV, Camera Mounted in Front Grill, Custom Headache Rack, AEV Raised Air Intake, AEV Salta HD Wheels in Onyx, 285/75/17 Toyo A/T II Tires
04Ram2500Hemi
2000_Posts
 
Posts: 2040
Joined: Thu May 31, 2012 10:19 am
Location: Missoula, MT

Re: 04Ram2500Hemi's 2012 Power Wagon

Postby Reloaderguy » Mon May 16, 2016 4:22 pm

I think AEV's wheels are made by WheelPros.
Best Year Power Wagon
User avatar
Reloaderguy
1000_Posts
 
Posts: 1300
Joined: Tue Feb 09, 2016 7:06 am
Location: Oregon

Re: 04Ram2500Hemi's 2012 Power Wagon

Postby adeluca73 » Mon May 16, 2016 4:58 pm

Are the PW wheels still Alcoa, I know they're no longer made here in the US ($$$)!after the 05 or 07 timeframe, & are imported from China or Taiwan, just not sure if they're still Alcoa brand.
2014 Ram PW SLT: Two tone Flame Red & Black
Completed Mods: Ram door sill guards, Front air deflector, WeatherTech slimline window deflectors, DiamondBack HD cover coated w/ Line-X, Mufflex MagnaFlow muffler & Resonator delete, Opti-Coat Pro 2.0, DeeZee tailgate strut, DeeZee ¼" fitted bed mat, Factor-55: FlatLink winch hook/Shorty Strap 3.0/Hitchlink 2.5, Warn Wireless Winch Remote, Locker by-pass, AEM dry filter, Truxedo LED bed lights wired into RamBox Connector, WhiteKnuckle sliders w/ full-length diamond plate coated in Line-X, Purple Cranium rear diff guard, AEV front/rear diff cover, AEV RAI w/ pre-filter, AEV ProCal (Bootleg'd), DOR Steering Box Brace, Phillips Hi intensity LEDs in cargo lamps & back-ups, triple anti-hop shocks, Truxx PW specific front 1.5" level, AAM 4.88's, custom black-out work, Line-X front/rear bumpers & wheel flares, 37" Nitto Ridge Grapplers, Plasti-dip PW wheels Black w/ Gunmetal metalizer, FilterMag kit, AMP Research BedStep
Next Mods: Thuren: {Coils, Track Bar, Boggie Bumps, King 2.5's shocks} , on-board air, HID low CANBUS replacement, LED HI, BD LED fogs
User avatar
adeluca73
2000_Posts
 
Posts: 2020
Joined: Mon May 19, 2014 9:56 pm
Location: The Pentagon, VA

Re: 04Ram2500Hemi's 2012 Power Wagon

Postby coder » Mon May 16, 2016 5:42 pm

adeluca73 wrote:Are the PW wheels still Alcoa, I know they're no longer made here in the US ($$$)!after the 05 or 07 timeframe, & are imported from China or Taiwan, just not sure if they're still Alcoa brand.
Primarily the 05's had Alcoa wheels maybe a few 06's, my truck was built in Feb 07 and has China stamped on the wheels.
Vehicle: 2007 Power Wagon Quad Cab - Inferno Red
Suspension: Carli 3" Hemi Coils, Carli Control Arms, Carli King 2.5 Pin-Tops, Carli Stainless Steering Stabilizer, Carli Trackbar | Synergy 1" Rear Shackle
Performance: Magnaflow Muffler | Magnaflow Y-Pipe
Wheels/Tires: Toyo AT II's 35x12.5x17
Steering/Drivetrain/Axles: Carli Front Diff Guard | Dynatrac Ball Joints | Redhead Steering Gear
Miscellaneous: Line-X Bedliner | Locker Bypass Switch | Mopar Rock Rails | DieHard Platinum Battery G65 | Performance Friction Brake Pads | Weathertech Digital Fit Mats | Winch Thermal Protection Bypass
User avatar
coder
1000_Posts
 
Posts: 1112
Joined: Wed Jun 06, 2012 3:18 pm
Location: Ladera Ranch, CA

Re: 04Ram2500Hemi's 2012 Power Wagon

Postby adeluca73 » Mon May 16, 2016 7:39 pm

Here's a SAE wheel J2530 standard fatigue calculator :

http://www.wheeltest.com/services/sae-j ... lator.html
2014 Ram PW SLT: Two tone Flame Red & Black
Completed Mods: Ram door sill guards, Front air deflector, WeatherTech slimline window deflectors, DiamondBack HD cover coated w/ Line-X, Mufflex MagnaFlow muffler & Resonator delete, Opti-Coat Pro 2.0, DeeZee tailgate strut, DeeZee ¼" fitted bed mat, Factor-55: FlatLink winch hook/Shorty Strap 3.0/Hitchlink 2.5, Warn Wireless Winch Remote, Locker by-pass, AEM dry filter, Truxedo LED bed lights wired into RamBox Connector, WhiteKnuckle sliders w/ full-length diamond plate coated in Line-X, Purple Cranium rear diff guard, AEV front/rear diff cover, AEV RAI w/ pre-filter, AEV ProCal (Bootleg'd), DOR Steering Box Brace, Phillips Hi intensity LEDs in cargo lamps & back-ups, triple anti-hop shocks, Truxx PW specific front 1.5" level, AAM 4.88's, custom black-out work, Line-X front/rear bumpers & wheel flares, 37" Nitto Ridge Grapplers, Plasti-dip PW wheels Black w/ Gunmetal metalizer, FilterMag kit, AMP Research BedStep
Next Mods: Thuren: {Coils, Track Bar, Boggie Bumps, King 2.5's shocks} , on-board air, HID low CANBUS replacement, LED HI, BD LED fogs
User avatar
adeluca73
2000_Posts
 
Posts: 2020
Joined: Mon May 19, 2014 9:56 pm
Location: The Pentagon, VA

Re: 04Ram2500Hemi's 2012 Power Wagon

Postby olyelr » Mon May 16, 2016 8:57 pm

adeluca73 wrote:Here's a SAE wheel J2530 standard fatigue calculator :

http://www.wheeltest.com/services/sae-j ... lator.html



And what the hell are us normal people supposed to do with that :lol:
2016 Ram Power Wagon Laramie - Granite Crystal Metallic - Ramboxes
- A virgin, other than White Knuckle sliders... and lots of Fluid Film -
User avatar
olyelr
2000_Posts
 
Posts: 2250
Joined: Sun Dec 07, 2014 8:00 pm
Location: Kewadin, MI

Re: 04Ram2500Hemi's 2012 Power Wagon

Postby TwinStick » Mon May 16, 2016 10:12 pm

Mine are Alcoa's, made to Alcoa's specs-----but Made in China. Mine is a 2008, built Nov 5th, 2007.
2008 Red QC PW G56. No lift yet, stock size tires. It pulls a 2016 Starcraft AR One Extreme, 3500 lbs.
Load Pro 35 helper springs. 2015 A.R.E. MX Series custom cap. PCP front diff cover protector. Mag-Hytec 6 qt rear diff cover. K&N replacement air filter only. Dual grounded throttle body. Winch TPC bypass. Fab Four rear bumper. DURA BAK lined rocker protection. And a bunch of new front end stuff.

G-56 Gear ratios: 1st) 6.29:1 2nd) 3.48:1 3rd) 2.10:1 4th) 1.38:1 5th) 1.0:1 6th) 0.79:1 Rev 6.29:1 --- = 78.01613:1 Crawl Ratio
-------------------------5.94:1--------3.28:1-------1.98:1-------1.31:1-------1.0:1-------0.74:1-----5.42:1 ---- = 73.675:1
545RFE----------------3.0:1---------1.67:1--------1.0:1--------0.75:1-------0.67:1------------------3.0:1 -------=37.21:1

2013+ 32.47 crawl ratio...............Can you see the trend ??????????????
TwinStick
2000_Posts
 
Posts: 3673
Joined: Mon May 28, 2012 5:58 pm

PreviousNext

Return to Member Builds

Who is online

Users browsing this forum: Google [Bot] and 1 guest