Board index Miscellaneous Gadgets, Gizmos and Gear

CBs, FRS / GMRS radios, stereos, computers, tools, etc. The stuff you use to support wheeling or use of your PW.

Wilton ATV - Hitch/Bench Vise

Postby Retired BLM Rig » Sun Apr 16, 2017 8:09 am

Maybe everyone has already seen this, but I thought I would share anyway. I've had one of these for a couple years, it's very well made. I don't carry it all the time, it spends most of it's time at my workbench. It sure would come in handy if you had to change a u-joint on the trail. It has a nice heavy duty blow molded case for transporting when it's not mounted. IMHO, Wilton makes some nice high quality products.

phpBB [video]

Clickable link for Tapatalk

User avatar
Retired BLM Rig
250_Posts
 
Posts: 263
Joined: Sun Jan 31, 2016 5:51 pm
Location: San Clemente, Ca.

Re: Wilton ATV - Hitch/Bench Vise

Postby Colibri » Sun Apr 16, 2017 9:30 am

That's awesome, thanks for posting. I've had a macs trail d vise for years and been happy with it, but that looks much better madeand the carrying case is a big plus.
Colibri
1000_Posts
 
Posts: 1068
Joined: Mon Jun 08, 2015 3:44 pm

Re: Wilton ATV - Hitch/Bench Vise

Postby Ducky's Dad » Sun Apr 16, 2017 12:29 pm

It's all fun and games until you walk into it in the dark.
Ducky's Dad
1000_Posts
 
Posts: 1346
Joined: Thu May 24, 2012 8:55 pm

Re: Wilton ATV - Hitch/Bench Vise

Postby RustyPW » Mon Apr 17, 2017 6:31 pm

Ducky's Dad wrote:It's all fun and games until you walk into it in the dark.

:lol: Sounds like past experience.
PWOC #53
2008 POWER WAGON RC
Mods to the PW; Nerffed Mopar RockRails, Wheel Well Liners, Bushwacker Pocket Fender Flairs, Garvmin dezl 560LMT GPS, Power Wagon Winch Kit, Line X Ultra Bed Liner, PIAA Headlight Bulbs, PIAA 580 Driving Lights (135 watt), PIAA 520 Fog Lights (135 watt), PIAA 520 ATP Off-Road Lights (135 watt), Locker Bypass, Modifed Rockcrusher Diff Covers, Mopar Utility Bed Rails and Tool Box, Warn Winch Wireless Remote Control, "el-cheapo" Inclinometer, Airaid CAI, Winch TPS Bypass, 35" Toyo's, Mopar Spare Tire Lock, 'T' Steering Linkage, Modifed PSC Steering Brace, P3 Brake Controller, Modifed Fusion "mall crawler" rear bumper , PIAA 1500 Back-Up Lights, 1Ton HEMI Tranny Cooler, Leer 100XR Bed Cap, Factory Tow Mirrors, CenterLine Rims 17x9-5.25 BS, Mag-Hytec Tranny Pan, AutoMeter Gauges, PSC Extreme Hydro Assist Steering, Carli Track Bar, Carli Ball-Joints, Dynatrac FreeSpin Hubs, Snorkel, RCV Axles, EBC Pads & Rotors, Aluminess Front Bumper, BIG Pul-Pal, 60" Extreme Hi-lift Jack, and more riggin' equipment, Carli Long Travel Air Bags, Bilstein 7100 Shocks - Carli Valving, MORE STUFF COMIN'.

Moab '10, '12, '14.
Rausch Creek Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17,
Russ NRA Benefactor Member
RustyPW
2000_Posts
 
Posts: 3276
Joined: Thu May 24, 2012 2:23 pm
Location: Brownsville Pa.

Re: Wilton ATV - Hitch/Bench Vise

Postby TwinStick » Mon Apr 17, 2017 6:48 pm

I have had my eye on that since it first came out. Just never got around to getting one.

"It's all fun and games until you walk into it in the dark."

I think everyone with a trailer hitch has done that at least once !!! :lol: I know I have, seen friggin stars it hurt so bad. :lol:
2008 Red QC PW G56. No lift yet, stock size tires. It pulls a 2016 Starcraft AR One Extreme, 3500 lbs.
Load Pro 35 helper springs. 2015 A.R.E. MX Series custom cap. PCP front diff cover protector. Mag-Hytec 6 qt rear diff cover. K&N replacement air filter only. Dual grounded throttle body. Winch TPC bypass. Fab Four rear bumper. DURA BAK lined rocker protection. And a bunch of new front end stuff.

G-56 Gear ratios: 1st) 6.29:1 2nd) 3.48:1 3rd) 2.10:1 4th) 1.38:1 5th) 1.0:1 6th) 0.79:1 Rev 6.29:1 --- = 78.01613:1 Crawl Ratio
-------------------------5.94:1--------3.28:1-------1.98:1-------1.31:1-------1.0:1-------0.74:1-----5.42:1 ---- = 73.675:1
545RFE----------------3.0:1---------1.67:1--------1.0:1--------0.75:1-------0.67:1------------------3.0:1 -------=37.21:1

2013+ 32.47 crawl ratio...............Can you see the trend ??????????????
TwinStick
2000_Posts
 
Posts: 3564
Joined: Mon May 28, 2012 5:58 pm

Re: Wilton ATV - Hitch/Bench Vise

Postby FirerescuePW » Mon Apr 17, 2017 9:52 pm

Yeah, apparently every nerve in the lower half of your body runs through the front of your shins

Sent from my SM-G935P using Tapatalk
'05 Mineral Gray Power Wagon QC #1005

WINCH MOB PROUD!

SuperChips FlashPaq; DT ProFab Steering Brace; 08.5 Steering linkage (twice); Toyo Open Country M/T 35/12.50x17; Carli front diff guard; Rockcrusher rear diff cover; White Knuckle Offroad Rock Rails; Carli 3"coils, track bar, and High Clearance Control Arms; Carli King 2.5" Remote Resi Shocks; Reflex spray-in liner; Extang Trifecta tonneau cover; Pop Lock electric tailgate lock (OOS); Tekonsha Prodigy brake control; LEDS & Strobes & Siren; Winch TPS Bypass; Warn Wireless Remote; Dog hair, and a BIG Wish List!
User avatar
FirerescuePW
1000_Posts
 
Posts: 1512
Joined: Sun May 20, 2012 10:51 am
Location: North Wales, PA

Re: Wilton ATV - Hitch/Bench Vise

Postby Bill2014 » Sun May 07, 2017 8:20 am

Too bad they don't make a model for a 2.5" receiver - the 2" to 2.5" adapter would just add more play. As more trucks are made with the 2.5" receiver, perhaps they will. :idea:
2014 Power Wagon Laramie
Titan V5 2.5" Receiver Pintle Hook
Warn wireless winch controller
.188" DOM White Knuckle Rock Sliders
Locker Bypass

Moab 2006
User avatar
Bill2014
500_Posts
 
Posts: 571
Joined: Fri May 09, 2014 7:03 pm
Location: Northern NY


Return to Gadgets, Gizmos and Gear

Who is online

Users browsing this forum: No registered users and 2 guests