Power Wagon Registry

By the time you're done installing the 39's the cost will be a wash and you'll have made permanent modifications to fit them. You have to cut out the rear wheel well: longer rear arms will cause a series of new problems like track bar to axle interference. Nevermind that you will have a lot of rubb...

Welcome!

So after all of that the answer is still 37s if you don't want to cut anything. I don't think I'd go to the trouble of 39s, either stick with 37s or step up to 40s. :lol: There is no trouble with 39's though. I can use my existing wheel. I could use stock wheels. I chose the BFG because it's the bi...

https://www.youtube.com/watch?v=qwSnMME9KYM Wondering what size tire you can fit on your Dodge Ram 2500 Cummins or Power Wagon? How much lift do you need? What about wheel offset & backspacing? Are you wanting to run those sweet 37-inch Mud Terrains? What about trimming? What about rubbing? In this...

You prepared for all the sheet metal cutting by choosing a 0 offset wheel?

Watch this https://youtu.be/SAQvLz8BTYs at :45 Payload or articulation, pick one. Yeah, that thing flexed like an AEV truck. I can't believe they left that in there. That's like straight-up Toyota bro stuff. And to be honest, that's what I'd expect. But also, you can see how that can go badly for s...

04Ram2500Hemi wrote: ↑

Sun Jan 19, 2020 10:00 pm

RustyPW wrote: ↑

Sun Jan 19, 2020 5:54 pm

You're holding your camera upside down again.

This fuggin forum I swear! If I post pics from my iPad shit looks upside down to others (it’s correct on my end).

That's actually your ipad. iOS auto-corrects the rotation. But if you save it out, it won't be right side up.

The Tremor is a gut punch to the PW, it's designed not for all us here, but for every dork on the internet whose like "Well I want a diesel with my Power Wagon" - like the features list reads like the "PW cry baby list" sure it's missing things that make the PW great, but it's almost like Ford was r...

Havn2muchfun wrote: ↑

Fri Jan 17, 2020 7:25 pm

Registered and very excited to make my first trip.

We're excited to have ya!

How would you compare the synergy link to the factory one? Is one better built over the other? https://scontent.fboi1-1.fna.fbcdn.net/v/t1.0-9/p720x720/82369017_1056212174771206_3963999250768986112_o.jpg?_nc_cat=110&_nc_eui2=AeGuljXkrOwtRamhhifwF2vt0VLSge0QHV-9bZr9xGr7NJbGTOTIKDWf4aZoQxuyyxK5NGf6h-...

Mario75 wrote: ↑

Thu Jan 16, 2020 6:13 am

Drooling is that the carli diff guard?

NOPE, That's from Maple Offroad, Neil is a great guy! I like to give business to those who support the hobby and community. This is why I'm big on Thuren, Dethloff and others.

This also happened https://scontent.fboi1-1.fna.fbcdn.net/v/t1.0-9/p720x720/81242815_1056101161448974_3913117159760330752_o.jpg?_nc_cat=107&_nc_ohc=_FQY4hY8cRkAX-uSXWF&_nc_ht=scontent.fboi1-1.fna&_nc_tp=1002&oh=7fd70fd2638ef19c0137d20379e39eb9&oe=5EDA1612 Guess it's time for a new post or to update ...

Put 39's on my truck https://scontent.fhhr1-1.fna.fbcdn.net/v/t1.0-9/82869540_1051881005204323_4318570722566864896_o.jpg?_nc_cat=107&_nc_eui2=AeGcBF95WswDgiSAt9U8mtxz59c2t27V2Per0V0C7duGK0cUa69G5WnxLWa7cZMef7H1yU8OEIqzGA4FxEz6dfqBOZVwDUYnArRZ5OZnAm3Wng&_nc_ohc=dna75gxN8DEAQlwrr7CypHp6t25jVtrZ-uJpBU...

Put 39's on my truck https://scontent.fhhr1-1.fna.fbcdn.net/v/t1.0-9/82869540_1051881005204323_4318570722566864896_o.jpg?_nc_cat=107&_nc_eui2=AeGcBF95WswDgiSAt9U8mtxz59c2t27V2Per0V0C7duGK0cUa69G5WnxLWa7cZMef7H1yU8OEIqzGA4FxEz6dfqBOZVwDUYnArRZ5OZnAm3Wng&_nc_ohc=dna75gxN8DEAQlwrr7CypHp6t25jVtrZ-uJpBU...

Put 39's on my truck https://scontent.fhhr1-1.fna.fbcdn.net/v/t1.0-9/82869540_1051881005204323_4318570722566864896_o.jpg?_nc_cat=107&_nc_eui2=AeGcBF95WswDgiSAt9U8mtxz59c2t27V2Per0V0C7duGK0cUa69G5WnxLWa7cZMef7H1yU8OEIqzGA4FxEz6dfqBOZVwDUYnArRZ5OZnAm3Wng&_nc_ohc=dna75gxN8DEAQlwrr7CypHp6t25jVtrZ-uJpBU5...

So I know that Dodge/Ram claims that the 5.7L is rated at 380hp and 400 lb-ft of torque while the 6.4L Hemi is rated at 410hp and 429 lb-ft of torque. My question is this- does anybody know what both engines dyno at? I did some google searching, but I couldn't find exactly what I was looking for. s...

Honestly, I'd rather have drums in the back, more surface area than those tiny things we have back there.

Ok. I knew this was going to be a monkey sh*t fight when I saw the first post. I really think each gen (hey let's not forget the original PW or the 70s models boys), have their own pros and cons. From simplicity to complexity. From higher vis shorter wheel base to longer wheel base higher comfort. ...

I wish someone on earth would make them for the 2014+ trucks. But still, NO ONE DOES!!! WHY GOD WHY DO YOU HATE US?

They got hit in 2018 by the BLM (at the last minute) over not being properly registered so, which requires you have an insurance policy, etc. A many thousand dollar last minute charge that wasn't budgeted. Which is why it was officially cancelled in 2018, it was just a bunch of people driving aroun...

The short answer: The Government made a lot of demands. All of it is expensive.

RustyPW wrote: ↑

Sat Jan 04, 2020 7:24 am

Your lips are a flappin', but garbage is coming out.

The new PW's just don't push the right buttons. It's got the motor and tranny, but that's it. No RC with 8ft bed.

My wife says that all the time.

POk3s wrote: ↑

Fri Jan 03, 2020 11:45 am

As you can see, whichever one a guy owns is the best year

Not so. Everyone knows the pre-14 trucks are trash. The owners just don't want to admit the truth and instead chose to live in denial.

Newer is better. I see all the time guys say their 2005-09 is the best because of some minor things, while the truck is burning to the ground behind them and they’re lying on the ground with a broken back because their grab handle ripped out while they were fixing the arcing door wiring harness tha...

It's weird, not sure what idiot measures they've put in place. But when wired up hard, like mine, they are instant. Whatever it is, like that can't be moving more than 3mph thing, it's all based on the smartbar. When my smart bar died, my lockers died with it. Which is how I ended up hard wiring min...