Search found 1347 matches

by coder
Sat Feb 08, 2020 9:20 pm
Forum: Power Wagon Talk
Topic: New Tires Yokohama X-AT 35's
Replies: 7
Views: 2755

Re: New Tires Yokohama X-AT 35's

Pics of the tires
by coder
Sat Feb 08, 2020 8:17 pm
Forum: Power Wagon Talk
Topic: New Tires Yokohama X-AT 35's
Replies: 7
Views: 2755

New Tires Yokohama X-AT 35's

Picked up a new set of tires today Yokohama X-AT's in 35x12.5-17 it's a fairly new Extreme AT tire comparable to the Toyo RT or Nitto Ridge Grappler take a look.

https://www.yokohamatire.com/tires/geolandar-x-at
by coder
Sat Feb 08, 2020 7:26 pm
Forum: Engine & Drivetrain
Topic: 14+ Possible Fan Clutch failure?
Replies: 19
Views: 3839

Re: 14+ Possible Fan Clutch failure?

Here is an easy way to tell if your fan clutch is working correctly or not: 1) The fan clutch should stop spinning almost immediately when you shut the engine off, if it keep spinning the clutch is worn out. 2) With the engine off you should be able to turn the fan by hand, if not the clutch is lock...
by coder
Wed Nov 27, 2019 11:46 am
Forum: Power Wagon Talk
Topic: 3 Gen Stainless SRT Exhaust Stud/Bolt PNs?
Replies: 8
Views: 2633

Re: 3 Gen Stainless SRT Exhaust Stud/Bolt PNs?

:rockon: coder :rockon: I hope you get many years before you hear tick-tick-tick-tick-tick again :D Thanks I hope so too. The funny thing is didn't really hear the tick-tick-tick of a leak I only noticed that my right side exhaust heat-shield was rattling around after further inspection I found tha...
by coder
Tue Nov 26, 2019 7:58 pm
Forum: Power Wagon Talk
Topic: 3 Gen Stainless SRT Exhaust Stud/Bolt PNs?
Replies: 8
Views: 2633

Re: 3 Gen Stainless SRT Exhaust Stud/Bolt PNs?

I ended up replacement everything with new OEM parts including studs/bolts, gaskets and heat-shields. I had one broken stud that needed to be extracted the nuts holding the heat-shields on were rusted solid so they had to be cut off. I could not get the right side header out of the wheel well so I d...
by coder
Mon Nov 11, 2019 9:47 pm
Forum: Power Wagon Talk
Topic: 3 Gen Stainless SRT Exhaust Stud/Bolt PNs?
Replies: 8
Views: 2633

3 Gen Stainless SRT Exhaust Stud/Bolt PNs?

After 3 year and 40k miles I need to replace the exhaust manifold studs/bolts on my trucks rebuilt engine. I have heard that you can use stainless steel SRT bolts. Are there any negatives in doing this, does anyone have the part numbers? Any and all input is welcome.
by coder
Sat Oct 19, 2019 12:08 am
Forum: Power Wagon Talk
Topic: I still like this truck.
Replies: 12
Views: 3318

Re: I still like this truck.

Beautiful country perfect PW territory
by coder
Fri Oct 18, 2019 11:53 pm
Forum: Power Wagon Talk
Topic: Fun in Telluride
Replies: 5
Views: 1350

Re: Fun in Telluride

Great pics nice to see a PW being enjoyed in the backcountry!
by coder
Tue Oct 15, 2019 7:14 pm
Forum: Power Wagon Talk
Topic: Transfer case fill plug
Replies: 3
Views: 830

Re: Transfer case fill plug

Same thing happened to me last year I purchased a Hanson 53211 Extractor (7/16" Multi Spline, for Tap Die Extraction) with a 5/8 socket it came out in a few minutes got 2 new plugs (fill & drain) from the dealer PN 68001627AA . Extractor How To Video: https://youtu.be/HoxQQuRHWd0 Amazon Link For Han...
by coder
Fri Sep 27, 2019 12:44 am
Forum: Power Wagon Talk
Topic: 2012 Needs a new Trans...thoughts on Jasper?
Replies: 6
Views: 2109

Re: 2012 Needs a new Trans...thoughts on Jasper?

A factory rebuild is the most reliable if it was my truck and I was planning on keeping it for awhile that would be my choice.
by coder
Thu Sep 05, 2019 7:32 pm
Forum: Engine & Drivetrain
Topic: Radiator Hoses: To Change Or Not?
Replies: 9
Views: 2003

Re: Radiator Hoses: To Change Or Not?

Since you can't always visibly see if a hose is going bad I would replacement them just for peace of mind. I would also recommend replacing, if you haven't recently, the thermostat, the thermostat inlet tube, and the radiator cap and heck you might as well throw in a new serpentine belt while your a...
by coder
Tue Aug 20, 2019 7:39 pm
Forum: Engine & Drivetrain
Topic: Oil filter question (different part #)
Replies: 8
Views: 1735

Re: Oil filter question (different part #)

Purolator makes many of the Mopar oil filters the Walmart filters are the same as from the dealer.
by coder
Thu Aug 15, 2019 8:00 pm
Forum: Power Wagon Talk
Topic: Full weight of PW on OEM rockrails?
Replies: 5
Views: 1171

Re: Full weight of PW on OEM rockrails?

I have the OEM Rock Rails and use them to lift my truck all the time, in fact they are at least as strong if not stronger stronger than any aftermarket rails you can buy. That being said however the frame is still the safest way to lift the truck because rock rails weren't really designed be used as...
by coder
Thu Aug 08, 2019 12:25 pm
Forum: Power Wagon Talk
Topic: Coyote Flats Trip Pics/Vids
Replies: 8
Views: 1590

Re: Coyote Flats Trip Pics/Vids

Coyote Flats were on my to-do list this summer. So far I haven't made. I will likely be in Papoose flats very soon though. Papoose flats is very scenic was there a few years back, definitely a lot drier no water anywhere. If you have time you can also see the old Saline Valley salt tram station on ...
by coder
Tue Aug 06, 2019 6:19 pm
Forum: Power Wagon Talk
Topic: Coyote Flats Trip Pics/Vids
Replies: 8
Views: 1590

Re: Coyote Flats Trip Pics/Vids

Here are a few hill decent videos

Into Funnel Lake camp
phpBB [video]

Clickable link for Tapatalk

Out the next morning
phpBB [video]

Clickable link for Tapatalk

by coder
Tue Aug 06, 2019 6:17 pm
Forum: Power Wagon Talk
Topic: Coyote Flats Trip Pics/Vids
Replies: 8
Views: 1590

Coyote Flats Trip Pics/Vids

Here are a few pics/vids from a recent off road/camping trip I took to the Eastern Sierra Nevada in the Coyote Flats area
by coder
Thu Aug 01, 2019 7:36 pm
Forum: Power Wagon Talk
Topic: 3rd Gen PW question
Replies: 29
Views: 5418

Re: 3rd Gen PW question

I'm torn, I love my PW, but I'm considering ordering 2020 Jeep Rubicon Unlimited and I don't need both.
by coder
Thu Aug 01, 2019 12:03 pm
Forum: Power Wagon Talk
Topic: 3rd Gen PW question
Replies: 29
Views: 5418

Re: 3rd Gen PW question

Ive been looking for a 3rd gen PW and doing some research on the side, some of the things ive read were after market winches are better, locker sway bar switch goes out so replacing sway bar and rewiring lockers. With all that being said would i be better off buying a regular 2500 and adding a bump...
by coder
Fri Jun 21, 2019 6:17 pm
Forum: Power Wagon Talk
Topic: 2006 Dodge Ram Power Wagon Title
Replies: 17
Views: 3367

Re: 2006 Dodge Ram Power Wagon Title

The 05-09 PW is a Dodge Ram 2500 5.7 Hemi with one of the following packages SLT 26P or Laramie 22L. It was marketed as a distinct model but technically wasn't so when you run the VIN it will show as a 2500 SLT or Laramie. See my window sticker below.
by coder
Tue Jun 11, 2019 6:17 pm
Forum: Power Wagon Talk
Topic: Missing smart bar
Replies: 37
Views: 6759

Re: Missing smart bar

Great news, remember the dealer has to program the new smartbar into the trucks computer before it will work. No they don't. I installed the smartbar and plugged it in. Everything works great. In fact, my lockers lock quicker now. :rockon: The dealer never seen it. :rockon: Glad you didn't have to ...
by coder
Wed Jun 05, 2019 6:48 pm
Forum: Power Wagon Talk
Topic: Missing smart bar
Replies: 37
Views: 6759

Re: Missing smart bar

Great news, remember the dealer has to program the new smartbar into the trucks computer before it will work.
by coder
Sun May 26, 2019 7:59 pm
Forum: Power Wagon Talk
Topic: New 4x4 In the Family
Replies: 5
Views: 1328

New 4x4 In the Family

No it's not a new PW however I took my wife vehicle shopping this week to replace a well worn 2010 Jeep Liberty and lo and behold, she wanted a new Jeep Wrangler. After several rounds of "are you sure this is what you want!" keep in mind she is by no means an off-road enthusiast. We now own a 2019 J...
by coder
Sun May 26, 2019 7:10 pm
Forum: Power Wagon Talk
Topic: Missing smart bar
Replies: 37
Views: 6759

Re: Missing smart bar

I've had that happen before with UPS apperantly stuff gets lost or stolen all the time.
by coder
Mon May 13, 2019 7:12 pm
Forum: Power Wagon Talk
Topic: So, I crunched my right rear door at Moab
Replies: 10
Views: 2306

Re: So, I crunched my right rear door at Moab

Looks good!
by coder
Fri May 10, 2019 10:29 pm
Forum: Power Wagon Talk
Topic: PW vs Raptor Video
Replies: 6
Views: 1732

Re: PW vs Raptor Video

These raptor vs power wagon comparison videos rarely ever drive down any trails that have realistic rock-crawling, something that shows the true benefits of front and rear lockers and a disconnecting sway-bar, somewhere you might actually need that winch. It's easy to fly down a straight dirt road f...